JKJae-Ho Kim

Jae-Ho Kim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jae-Ho Kim has a total of 140 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Raman spectroscopic comparison of zearalenone and its derivatives for non-destructive rapid detection

    by Won-Seok Kang, Sung-Wook Choi, Hyo-Sop Kim, Jae-Ho Kim, Jae-Hyeok Lee

    Raman spectroscopy is used to investigate the absorption and dispersion of zearalenone (ZEN) and its derivatives. The C=C stretching vibration modes of ZEN and zearalenol (ZENOL) were appeared at 975–990 cm−1. The C=O vibration mode was present at 1680–1690 cm−1 for ZEN and zearalanone (ZAN), but it was absent for ZENOL and zearalanol (ZANOL) which have –OH group instead of –C=O group in ZEN and ZAN molecular structures. On the basis of this characterization, Raman spectra of specific chemical groups and linkages corresponding to the structural difference of ZEN and its derivatives were identified. These results indicated that Raman spectroscopy can apply for the identification of ZEN and its derivatives and has a potential for the non-destructive rapid detection of these compounds in food.


  • Open Access

    Advantages of Using 3D Spheroid Culture Systems in Toxicological and Pharmacological Assessment for Osteogenesis Research

    by Chawon Yun, Sou Hyun Kim, Kyung Mok Kim, Min Hye Yang, Mi Ran Byun, Joung-Hee Kim, Doyoung Kwon, Huyen T. M. Pham, Hyo-Sop Kim, Jae-Ho Kim, et al.

    Bone differentiation is crucial for skeletal development and maintenance. Its dysfunction can cause various pathological conditions such as rickets, osteoporosis, osteogenesis imperfecta, or Paget’s disease. Although traditional two-dimensional cell culture systems have contributed significantly to our understanding of bone biology, they fail to replicate the intricate biotic environment of bone tissue. Three-dimensional (3D) spheroid cell cultures have gained widespread popularity for addressing bone defects. This review highlights the advantages of employing 3D culture systems to investigate bone differentiation. It highlights their capacity to mimic the complex in vivo environment and crucial cellular interactions pivotal to bone homeostasis. The exploration of 3D culture models in bone research offers enhanced physiological relevance, improved predictive capabilities, and reduced reliance on animal models, which have contributed to the advancement of safer and more effective strategies for drug development. Studies have highlighted the transformative potential of 3D culture systems for expanding our understanding of bone biology and developing targeted therapeutic interventions for bone-related disorders. This review explores how 3D culture systems have demonstrated promise in unraveling the intricate mechanisms governing bone homeostasis and responses to pharmacological agents.


  • Open Access

    High-Throughput Screening of 3-Dimensional Co-culture Hair Follicle Mimetic Tissue with an Enhanced Extracellular Matrix for the Screening of Hair Growth-Promoting Compounds

    by Huyen T. M. Pham, Hyo-Sop Kim, Duc Long Nguyen, Hyun Woo Joo, Min Kyu Kim, Young Kwan Sung, Minh Hung Vu, Heung Sik Hahm, Woo Jung Kim, Jae-Ho Kim, et al.

    Hair follicle cells reside within a complex extracellular matrix (ECM) environment in vivo, where physical and chemical cues regulate their behavior. The ECM is crucial for hair follicle development and regeneration, particularly through epithelial–mesenchymal interactions. Current in vitro models often fail to replicate this complexity, leading to inconsistencies in evaluating hair loss treatments. Advanced 3-dimensional (3D) culture systems that better mimic in vivo ECM dynamics are needed for more effective therapeutic assessments. Here, we introduce a 3D co-culture system designed to replicate in vivo ECM dynamics. The system incorporates primary dermal papilla cells from human patients, co-cultured with neonatal keratinocytes. This platform facilitates uniform spheroid formation through cell sliding and aggregation, enabling the evaluation of approximately 60 spheroids per well. The model is optimized for high-throughput screening, allowing precise assessments of hair-loss-inducing compounds under consistent conditions. We successfully generated dermal papilla cell and keratinocyte spheroids that closely resemble the native ECM structure, providing an optimal microenvironment for studying hair follicle biology. The 3D co-culture model supported efficient spheroid formation with consistent cellular organization and polarization, along with enhanced ECM-related gene expression crucial for hair follicle regeneration. Uniform spheroid formation and reproducibility were demonstrated across experiments. Overall, the novel 3D co-culture system provides a robust platform for replicating in vivo-like ECM conditions, enabling effective assessment of potential hair loss treatments through epithelial–mesenchymal interactions. Its high-throughput capacity, combined with reproducibility and ease of use, makes it a valuable tool for screening therapeutic candidates and advancing hair loss treatment development.


  • Open Access

    A novel and cost-effective method for high-throughput 3D culturing and rhythmic assessment of hiPSC-derived cardiomyocytes using retroreflective Janus microparticles

    by Huyen T. M. Pham, Duc Long Nguyen, Hyo-Sop Kim, Eun Kyeong Yang, Jae-Ho Kim, Hyun C. Yoon, Hyun-Ji Park

    Background: Human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) gain attention as a potent cell source in regenerative medicine and drug discovery. With the necessity of the demands for experimental models to create a more physiologically relevant model of the heart in vitro we herein investigate a 3D culturing platform and a method for assessing rhythm in hiPSC-CMs. Methods: The 3D cell culture PAMCELL™ plate is designed to enable cells to attach exclusively to adhesive patterned areas. These cell adhesive zones, named as micro-patterned pads, feature micron silica beads that are surface-modified with the well-known arginyl-glycyl-aspartic acid (RGD) peptide. RGD binding to the surface of hiPSC-CMs facilitates cell–cell attachment and the formation of uniform-size spheroids, which is controlled by the diameter of the micro-patterned pads. The assessment and evaluation of 3D hiPSC-CMs beating pattern are carried out using reflective properties of retroreflective Janus micro-particle (RJP). These RJPs are modified with an antibody targeting the gap junction protein found on the surface of hiPSC-CM spheroids. The signal assessment system comprises a camera attached to an optical microscope and a white light source. Results: The 3D PAMCELL™ R100 culture plate efficiently generate approximately 350 uniform-sized hiPSC-CM spheroids in each well of a 96-well plate and supported a 20-day culture. Analysis of genes and protein expression levels reveal that iPSC-CM spheroids grown on PAMCELL™ R100 retain cardiac stem cell characteristics and functions, outperforming traditional 2D culture platform. Additionally, the RJPs enable monitoring and evaluation of in vitro beating properties of cardiomyocytes without using complex monitoring setup. The system demonstrates its capability to identify alteration in the rhythmic activity of cardiac cells when exposed to ion channel blockers, nifedipine and E4031. Conclusions: The integration of the 3D culture method and RJPs in this study establishes a platform for evaluating the rhythmic properties of 3D hiPSC-CMs. This approach holds significant potential for identifying arrhythmias or other cardiac abnormalities, ultimately contributing to the development of more effective therapies for heart diseases. Graphical


  • Open Access

    Advances in Injectable In Situ-Forming Hydrogels for Intratumoral Treatment

    by Gi Ru Shin, Hee Eun Kim, Jae Ho Kim, Sangdun Choi, Moon Suk Kim

    Chemotherapy has been linked to a variety of severe side effects, and the bioavailability of current chemotherapeutic agents is generally low, which decreases their effectiveness. Therefore, there is an ongoing effort to develop drug delivery systems to increase the bioavailability of these agents and minimize their side effects. Among these, intratumoral injections using in situ-forming hydrogels can improve drugs’ bioavailability and minimize drugs’ accumulation in non-target organs or tissues. This review describes different types of injectable in situ-forming hydrogels and their intratumoral injection for cancer treatment, after which we discuss the antitumor effects of intratumoral injection of drug-loaded hydrogels. This review concludes with perspectives on the future applicability of, and challenges for, the adoption of this drug delivery technology.


  • Enhancement of anti-inflammatory and immunomodulatory effects of adipose-derived human mesenchymal stem cells by making uniform spheroid on the new nano-patterned plates

    by Sangho Lee, Hyo-Sop Kim, Byoung-Hoon Min, Byoung Geun Kim, Shin Ae Kim, Hyeyoung Nam, Minsuk Lee, Minsun Kim, Hye Yeon Hwang, Alex Inkeun Leesong, et al.


  • Open Access

    Template-Assisted Electrochemical Synthesis of CdSe Quantum Dots—Polypyrrole Composite Nanorods

    by Won-Seok Kang, Taegon Oh, Gwang-Hyeon Nam, Hyo-Sop Kim, Ki-Suk Kim, Sun-Hyun Park, Jae-Ho Kim, Jae-Hyeok Lee

    Luminescent nanoparticles have reached a high level of maturity in materials and spectral tunability for optics and optoelectronics. However, the lack of facile methodology for heterojunction formation of the nanoparticles provides many challenges for scalability. In this paper we demonstrate a simple procedure to synthesize a nanoparticle-embedded polymer nanorod hybrid structure via a template-based electrochemical method using anodic aluminum oxide membranes. This method enables the formation of interactive nanostructures wherein the interface area between the two components is maximized. As a proof of concept, semiconducting CdSe nanoparticles were embedded in polypyrrole nanorods with dimensions that can be finely tuned. We observed enhanced photoluminescence of the hybrid structures compared with bare polypyrrole nanorods.


  • Open Access

    Behavior of Muscle-Derived Stem Cells on Silica Nanostructured Substrates

    by Hyo-Sop Kim, Bit Na Lee, Sangdun Choi, Moon Suk Kim, Jae-Ho Kim

    The aim of the present work was to evaluate the responses of rat muscle-derived stem cells (rMDSCs) to growth on silica nanostructured substrates (SN) with nanoscale topographic surfaces. SN of different sizes (SN-60, SN-150, SN-300, SN-500, and SN-700) were prepared using silica nanoparticles with sizes of 60–700 nm. The prepared SN showed roughness at the nanoscale level. The total number of adherent cells on SN increased with increasing nanoscale level and incubation time. The rMDSCs attached to SN-500 and SN-700 were extensively flattened, whereas those grown on SN-60, SN-150, and SN-300 were more rounded. The rank order of the cell length and height of attached rMDSCs at 5 d on different surfaces was SN-60 ≈ SN-150 >> SN-300 > SN-500 > SN-700 > glass. Compared with rMDSCs grown on SN-60, SN-150, or SN-300, those attached to SN-500 and SN-700 exhibited a distinct morphology with filopodial extensions and stronger expression of focal adhesion, integrin, and actin. An evaluation of the gene expression of adhered rMDSCs showed that rMDSCs grown on SN-300 exhibited a higher environmental stress response than those grown on glass or SN-700. Collectively, our data provide fundamental insight into the cellular response and gene expression of rMDSCs grown on nanostructured substrates.


  • Cultivation of human dermal fibroblasts and epidermal keratinocytes on keratin‐coated silica bead substrates

    by Bee Yi Tan, Luong T. H. Nguyen, Hyo‐Sop Kim, Jae‐Ho Kim, Kee Woei Ng

    Human hair keratin is promising as a bioactive material platform for various biomedical applications. To explore its versatility further, human hair keratin was coated onto monolayers of silica beads to produce film-like substrates. This combination was hypothesized to provide a synergistic effect in improving the biochemical properties of the resultant composite. Atomic force microscopy analysis showed uniform coatings of keratin on the silica beads with a slight increase in the resulting surface roughness. Keratin-coated silica beads had higher surface energy and relatively lower negative charge than those of bare silica beads. To investigate cell response, human dermal fibroblasts (HDFs), and human epidermal keratinocytes (HEKs) were cultured on the substrates over 4 days. Results showed that keratin coatings significantly enhanced the metabolic activity of HDFs and encouraged cell spreading but did not exert any significant effects on HEKs. HDF expression of collagen I was significantly more intense on the keratin-coated compared to the bare silica substrates. Furthermore, HDF secretion of various cytokines suggested that keratin coatings triggered active cell responses related to wound healing. Collectively, our study demonstrated that human hair keratin-coated silica bead monolayers have the potential to modulate HDF behavior in culture and may be exploited further. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2789–2798, 2017.


  • Open Access

    Preparation of Pendant Group-Functionalized Diblock Copolymers with Adjustable Thermogelling Behavior

    by Bo Keun Lee, Ji Hoon Park, Seung Hun Park, Jae Ho Kim, Se Heang Oh, Sang Jin Lee, Bun Yeoul Lee, Moon Suk Kim

    Recently, several thermogelling materials have been developed for biomedical applications. In this study, we prepared methoxy polyethylene glycol (MPEG)-b-(poly(ε-caprolactone)-ran-poly(2-chloride-ε-caprolactone) (PCL-ran-PfCL)) (MP-Cl) diblock copolymers at room temperature via the ring-opening polymerization of caprolactone (CL) and 2-chloride-ε-caprolactone (fCL) monomers, using the terminal alcohol of MPEG as the initiator in the presence of HCl. MPEG-b-(poly(ε-caprolactone)-ran-poly(2-azide-ε-caprolactone) (PCL-ran-PCL-N3)) (MP-N3) was prepared by the reaction of MP-Cl with sodium azide. MPEG-b-(poly(ε-caprolactone)-ran-poly(2-amine-ε-caprolactone) (PCL-ran-PCL-NH2)) (MP-NH2) was subsequently prepared by Staudinger reaction. MP-Cl and MP-N3 showed negative zeta potentials, but MP-NH2 had a positive zeta potential. MP-Cl, MP-N3, and MP-NH2 solutions formed opaque emulsions at room temperature. The solutions exhibited a solution-to-hydrogel phase transition as a function of the temperature and were affected by variation of the chloride, azide, and the amine pendant group, as well as the amount of pendant groups present in their structure. Additionally, the phase transition of MP-Cl, MP-N3, and MP-NH2 copolymers was altered by pendant groups. The solution-to-hydrogel phase transition was adjusted by tailoring the crystallinity and hydrophobicity of the copolymers in aqueous solutions. Collectively, MP-Cl, MP-N3, and MP-NH2 with various pendant-group contents in the PCL segment showed a solution-to-hydrogel phase transition that depended on both the type of pendant groups and their content.