YWYing Wang

Ying Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ying Wang has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Amorphous and Crystalline TiO2 Nanotube Arrays for Enhanced Li-ion Intercalation Properties

    by Dongsheng Guan, Chuan Cai, Ying Wang

    We have employed anodic oxidation of Ti foils to prepare self-organized TiO2 nanotube arrays which show enhanced electrochemical properties for applications as Li-ion battery electrode materials. The lengths and pore diameters of TiO2 nanotubes can be finely tuned by varying voltage, electrolyte composition, or anodization time. The as-prepared nanotubes are amorphous and can be converted into anatase nanotubes with heat treatment at 480oC and nanotubes of mixed anatase/rutile phases by heating at 580oC. The morphological features of nanotubes remain unchanged after annealing. Amorphous nanotubes with a length of 3.0 μm and an outer diameter of 125 nm delivers a capacity of 91.2 μA h cm-2 at a current density of 400 μA cm-2, while those with a length of 25 μm and an outer diameter of 158 nm display a capacity of 533 μA h cm-2. The 3-μm long anatase nanotubes and nanotubes of mixed phases show lower capacities of 53.8 μA h cm-2 and 63.1 μA h cm-2, respectively at the same current density. The amorphous TiO2 nanotubes with a length of 1.9 μm exhibit a capacity five times higher than that of TiO2 compact layer even when the nanotube array is cycled at a current density 80 times higher than that for the compact layer. The amorphous nanotubes show excellent capacity retention ability over 50 cycles. Cycled nanotubes show little change in morphology compared to the nanotubes before cycling, indicating the high structural stability of TiO2 nanotubes.


  • Open Access

    Novel Nanocomposite Materials for Advanced Li-Ion Rechargeable Batteries

    by Chuan Cai, Ying Wang

    Nanostructured materials lie at the heart of fundamental advances in efficient energy storage and/or conversion, in which surface processes and transport kinetics play determining roles. Nanocomposite materials will have a further enhancement in properties compared to their constituent phases. This Review describes some recent developments of nanocomposite materials for high-performance Li-ion rechargeable batteries, including carbon-oxide nanocomposites, polymer-oxide nanocomposites, metal-oxide nanocomposites, and silicon-based nanocomposites, etc. The major goal of this Review is to highlight some new progress in using these nanocomposite materials as electrodes to develop Li-ion rechargeable batteries with high energy density, high rate capability, and excellent cycling stability.