KTKirsi Tappura

Kirsi Tappura

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Kirsi Tappura has a total of 218 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    On-Chip Polarization Rotators Using Metasurface

    by Dura Shahwar, Markku Kapulainen, Tomi Haatainen, Mikko Harjanne, Matteo Cherchi, Zhipei Sun, Timo Aalto, Kirsi Tappura

    Metasurfaces, with their ability to finely manipulate light properties (e.g., polarization), represent a frontier in optical technology. Here, we report innovative gold-based metasurfaces that are adept at changing the light polarization across a broad range of incident angles. Their expansive acceptance angle facilitates seamless integration with silicon waveguides, culminating in the realization of a novel, compact, broadband, and low-loss on-chip polarization rotator. The demonstrated metasurface devices show polarization conversion efficiencies as high as 98.5% at 1550 nm in the free space measurements. Unlike conventional plasmonic metasurfaces, which lack broadband capabilities, our metasurface-based waveplates show extinction ratios of >15 dB for a 120 nm bandwidth. These metasurfaces are positioned on top of up-reflecting mirrors fabricated in a micrometer-scale silicon-on-insulator platform to demonstrate on-chip polarization rotation. The demonstrated polarization rotator shows an extinction ratio of more than 10 dB for a 100 nm bandwidth. This study marks the first successful demonstration of on-chip polarization manipulation utilizing metasurface integration, heralding significant potential impacts for enhancing the functionality and miniaturization of photonic integrated circuits.


  • Integrated Radiometer at 240 GHz With SiGe MMIC Detector and GRIN Silicon Lens

    by Pekka Pursula, Antti Lamminen, Henrik Forstén, Hannu Sipola, Kirsi Tappura, Jaakko Saarilahti, Mikko Varonen, Vladimir Ermolov, Mikko Kantanen

    We describe an integrated radiometer at 240 GHz consisting of a direct detection MMIC fabricated in BiCMOS SiGe and a silicon gradient refractive index (GRIN) lens. The planar GRIN lens enables placing the MMIC with an on-chip dipole antenna directly on the GRIN lens in the focal point of the lens. We describe, how this method of integration can be extended to larger detector arrays while presenting results of a single pixel in this article. The direct detection MMIC includes an on-chip dipole antenna, a low-noise amplifier (LNA), and a diode detector. The radiometer bandwidth (BW) is 38 GHz, defined by the monolithic microwave integrated circuit (MMIC). The GRIN lens is fabricated in high-resistivity silicon and has a gain of 12.2 dBi at 240 GHz with an on-chip feed antenna. The integrated radiometer achieves noise-equivalent temperature difference (NETD) of 0.5 K/Hz $^{1/2}$ . The radiometer with external chopping is stable up to an integration time of 100 s, as demonstrated by the Allan variance measurement, where an NETD of 0.03 K with 100-s integration time is measured.


  • Open Access

    Suppression of 1/f noise in graphene due to anisotropic mobility fluctuations induced by impurity motion

    by Masahiro Kamada, Weijun Zeng, Antti Laitinen, Jayanta Sarkar, Sheng-Shiuan Yeh, Kirsi Tappura, Heikki Seppä, Pertti Hakonen

    Low frequency resistance variations due to mobility fluctuations is one of the key factors of 1/f noise in metallic conductors. According to theory, such noise in a two-dimensional (2D) device can be suppressed to zero at small magnetic fields, implying important technological benefits for low noise 2D devices. In this work, we provide evidence of anisotropic mobility fluctuations by demonstrating a strong field-induced suppression of noise in a high-mobility graphene Corbino disk, even though the device displays only a tiny amount of 1/f noise inherently. The suppression of the 1/f noise depends on charge density, showing less non-uniform mobility fluctuations away from the Dirac point with charge puddles. We model our results using an approach based on impurity clustering dynamics and find our results consistent with the 1/f noise induced by scattering of carriers on mobile impurities forming clusters.


  • Open Access

    Second spectrum of 1/f noise due to mobility fluctuations: Simulations vs experiments in suspended graphene

    by Weijun Zeng, Kirsi Tappura, Masahiro Kamada, Antti Laitinen, Heikki Seppä, Pertti Hakonen

    Mobility fluctuations have been observed to influence 1/f noise in mesoscopic two-dimensional conductors in recent experiments. If such mobility noise can be assigned to clustering/declustering of defects/impurities, the second spectrum should also display 1/f character. In this work, we investigate the second spectrum of noise due to mobile impurities on a two-dimensional lattice both using kinetic Monte Carlo simulations (periodic boundary conditions either in one or two directions) and experiments on suspended graphene in Corbino geometry. The simulations indicate 1/fδ behavior with δ≃0.8 ± 0.15 for the second spectrum of noise, while the experiments on suspended graphene yield an exponent δ≃0.7 ± 0.3, independent of the amount of adsorbed atoms.


  • Open Access

    Nano-thermoelectric infrared bolometers

    by Aapo Varpula, Kirsi Tappura, Jonna Tiira, Kestutis Grigoras, Olli-Pekka Kilpi, Kuura Sovanto, Jouni Ahopelto, Mika Prunnila

    Infrared (IR) radiation detectors are used in numerous applications from thermal imaging to spectroscopic gas sensing. Obtaining high speed and sensitivity, low-power operation, and cost-effectiveness with a single technology remains to be a challenge in the field of IR sensors. By combining nano-thermoelectric transduction and nanomembrane photonic absorbers, we demonstrate uncooled IR bolometer technology that is material-compatible with large-scale CMOS fabrication and provides fast and high sensitivity response to long-wavelength IR (LWIR) around 10 µm. The fast operation speed stems from the low heat capacity metal layer grid absorber connecting the sub-100 nm-thick n- and p-type Si nano-thermoelectric support beams, which convert the radiation induced temperature rise into voltage. The nano-thermoelectric transducer-support approach benefits from enhanced phonon surface scattering in the beams, leading to reduction in thermal conductivity, which enhances the sensitivity. We demonstrate different size nano-thermoelectric bolometric photodetector pixels with LWIR responsitivities, specific detectivities, and time constants in the ranges 179 V/W–2930 V/W, 1.5 × 107 cm Hz1/2/W–3.1 × 108 cm Hz1/2/W, and 66 µs–3600 µs, respectively. We benchmark the technology against different LWIR detector solutions and show how nano-thermoelectric detector technology can reach the fundamental sensitivity limits posed by phonon and photon thermal fluctuation noise.


  • Open Access

    A Passive, Fully Staring THz Video Camera Based on Kinetic Inductance Bolometer Arrays

    by Juho Luomahaara, Hannu Sipola, Leif Gronberg, Aki Mayra, Mika Aikio, Andrey Timofeev, Kirsi Tappura, Anssi Rautiainen, Aleksi Tamminen, Visa Vesterinen, et al.

    Current state-of-the-art security video cameras operating in the THz regime employ up to a few hundred detectors together with optomechanical scanning to cover an adequate field-of-view for practical concealed object detection. As a downside, the scanning reduces the integration time per pixel compromising sensitivity, increases the complexity, and reduces the reliability of the system. In contrast to this, we demonstrate a video camera, for the first time, basing its operation on the concept of a fully-staring 2D detector array with a single detector element responsible for a single imaged pixel. The imaging system is built around the detector technology of kinetic inductance bolometers, allowing the operation in the intermediate temperature range above 5 K and the scale-up of the detector count into multi-kilo-pixel arrays and beyond. The system is designed for a field-of-view of 2×1 ${m^{2}}$ and an imaging distance of 2.5 m. We describe the main components of the system and show images from concealed object experiments performed at a near-video rate of 9 Hz.


  • A fully-staring THz video camera for concealed object detection (Conference Presentation)

    by Juho Luomahaara, Hannu Sipola, Leif Grönberg, Andrey V. Timofeev, Kirsi Tappura, Mika Aikio, Aki P. Mäyrä, Anssi Rautiainen, Visa Vesterinen, Mikko M. Leivo, et al.

    We present a fully-staring THz video camera prototype intended for security screening. The camera utilizes so-called kinetic inductance bolometers to detect THz radiation in the bandwidth of 0.3-1 THz. The imaging distance is 2.5 m with the field-of-view being 2 m × 1 m. The camera is equipped with a kilo-pixel detector array, large field-of-view optics, intermediate-scale cryogenics operating at 6 K, and low-noise electronics to read out the whole detector array. The imaging capabilities of the system are demonstrated through radiometric performance characterization and actual imaging experiments.

  • Amorphous silicon waveguide escalator: monolithic integration of active components on 3-um SOI platform

    by Arijit Bera, Matteo Cherchi, Kirsi Tappura, Päivi Heimala, Timo Aalto

    VTT’s 3 μm SOI platform with record low propagation loss (0.1 dB/cm for fundamental mode), as well as polarization insensitivity, offers a rich portfolio of efficient passive and active components. With a view to extend the component toolbox by monolithically integrating high-speed plasmonic modulators, we have developed an a-Si:H based waveguide escalator to take out light from highly confined thick-SOI passives to the top layer where active materials are monolithically integrated. Using the compact escalator, monolithic integration of various high-speed active components on the 3 μm SOI platform are proposed.


  • High-performance infrared thermoelectric bolometers based on nanomembranes

    by Aapo Varpula, Kirsi Tappura, Jonna Tiira, Kestutis Grigoras, Kai Viherkanto, Jouni Ahopelto, Mika Prunnila

    The state-of-the-art infrared (IR) photodetectors are either thermal detectors (bolometers) or quantum detectors (photovoltaic and photoconductive detectors). Compared to quantum IR photodetectors, IR bolometers are slower and less sensitive but in turn, they offer lower cost without need for cooling and exotic materials (e.g. HgCdTe). Phonon/photon engineered materials offer interesting routes for enhancing room-temperature IR bolometers. We have recently demonstrated experimentally a nano-thermoelectric bolometer for long-wave IR detection. The technology utilizes efficient thermoelectric transducers based on silicon nanomembranes, which have an enhanced thermoelectric figure of merit arising from the low thermal conductivity stemming from the nano-scale thickness. For the absorption of the IR radiation the nano-thermoelectric bolometer utilizes a nanomembrane based quarter-wave resistive absorber, which is also known as the Salisbury screen. The use of nanomembranes in both the thermoelectric transducer and the absorber results in a very small thermal mass, and thereby high speed for the detector. In this article, we present an analytical model for quarter-wave resistive absorbers (i.e. Salisbury screens). It can be applied both in radio frequency (RF) and optical applications. The results of the analytical model are compared with the ones obtained with the transfer-matrix method using the optical material data available in the literature. We present also a device model of the nano-thermoelectric IR detector and estimate the full performance of this technology.