WHWolfram Höland

Wolfram Höland

*This is an algorithmically generated author record based on publicly available information.

Wolfram Höland has a total of 38 co-authors. Here are the top co-authors by number of shared publications:

  • Christian Ritzberger

    Research and Development, Inorganic Chemistry, Technical Fundamentals, Ivoclar Vivadent AG, Schaan, Liechtenstein

    2 shared publications
  • Christian Ritzberger

    Ivoclar Vivadent AG, Benderstrasse 2, Li-9494 Schaan, Liechtenstein

    2 shared publications
  • Elke Apel

    Ivoclar Vivadent AG, Bendererstr. 2, Li-9494 Schaan, Principality of Liechtenstein

    2 shared publications
  • Marcel Schweiger

    Research and Development, Inorganic Chemistry, Technical Fundamentals, Ivoclar Vivadent AG, Schaan, Liechtenstein

    2 shared publications
  • Marlies Höland

    University of Applied Sciences of Technology Werdenbergerstr.4 Buchs CH‐9471 Switzerland

    2 shared publications
  • Volker M. Rheinberger

    Ivoclar Vivadent AG Research and Development Bendererstr. 2 Schaan LI‐9494 Principality of Liechtenstein

    2 shared publications

Latest Publications

  • Nucleation and Crystal Formation in Lithium Disilicate‐Apatite Glass‐Ceramic from a Combined Use of X‐Ray Diffraction, Solid‐State NMR, and Microscopy

    by Wei‐Chih Liao, Markus Rampf, Marc Dittmer, Christophe Copéret, Wolfram Höland

    Glass‐ceramics are multi‐phase materials that are comprised of one amorphous phase and at least one crystalline phase. Their versatile performance and properties can be engineered by alterations of the three fundamental steps – formulation and production of the amorphous base glass, nucleation, and crystallization. Efforts have been made on syntheses of glass‐ceramics with different components, yet little is known about the details of nucleation and crystallization processes that are essential for tailoring glass‐ceramic properties. Herein, we investigate the nucleation and crystallization mechanisms of a multi‐component, that is SiO2‐Al2O3‐CaO‐Li2O‐K2O‐P2O5‐F, glass‐ceramic system by a combined use of powder X‐ray diffraction (pXRD), solid‐state nuclear magnetic resonance (NMR), and electron microscopic (EM) techniques. The role of P2O5 in the nucleation and crystallization processes is particularly studied. We show that the formation of lithium silicate crystals being independent of the P2O5‐associated crystals, and the separation of P2O5 phases into individual growth domains of lithium orthophosphate and fluorapatite. We also observe the non‐uniform distribution of fluorapatite particles that explains the opalescence effect of this glass‐ceramic.


  • Open Access

    Editorial: Nucleation and Crystallization of Glasses and Glass-Ceramics

    by Joachim Deubener, Wolfram Höland

    Editorial: Nucleation and Crystallization of Glasses and Glass-Ceramics


  • Open Access

    Editorial: Inorganic Biomaterials

    by Aldo R. Boccaccini, Wolfram Höland

    Editorial: Inorganic Biomaterials


  • Open Access

    Radiopaque Strontium Fluoroapatite Glass-Ceramics

    by Wolfram Höland, Marcel Schweiger, Marc Dittmer, Christian Ritzberger

    The controlled precipitation of strontium fluoroapatite crystals, was studied in four base glass compositions derived from the SiO2 – Al2O3 – Y2O3 – SrO – Na2O – K2O/Rb2O/Cs2O – P2O5 – F system. The crystal phase formation of these glasses and the main properties of the glass-ceramics, such as thermal and optical properties and radiopacity were compared with a fifth, a reference glass-ceramic. The reference glass-ceramic was characterized as Ca-fluoroapatite glass-ceramic. The four strontium fluoroapatite glass-ceramics showed the following crystal phases: a) Sr5(PO4)3F – leucite, KAlSi2O6 , b) Sr5(PO4)3F – leucite, KAlSi2O6, and nano-sized NaSrPO4 c) Sr5(PO4)3F – pollucite, CsAlSiO4 , and nano-sized NaSrPO4, d) Sr5(PO4)3F – Rb-leucite, RbAlSi2O6, and nano-sized NaSrPO4. The proof of crystal phase formation was possible by X-ray diffraction (XRD). The microstructures, which were studied using scanning electron microscopy (SEM) demonstrated a uniform distribution of the crystals in the glass matrix. The Sr-fluoroapatites were precipitated based on an internal crystallization process, and the crystals demonstrated a needlelike morphology. The study of the crystal growth of needlelike Sr-fluoroapatites gave a clear evidence of an Ostwald ripening mechanism. The formation of leucite, pollucite and Rb-leucite was based on a surface crystallization mechanism. Therefore, a twofold crystallization mechanism was successfully applied to develop these types of glass-ceramics. The main focus of this study was the controlled development of glass-ceramics exhibiting high radiopacity in comparison to the reference glass-ceramic. This goal could be achieved with all four glass-ceramics with the preferred development of the Sr-fluoroapatite – pollucite-type glass-ceramic. In addition to this main development, it was possible to control the thermal properties. Especially the Rb-leucite containing glass-ceramic showed the highest coefficient of thermal expansion (CTE). These glass-ceramics allow optical properties, especially the translucency and color, to be tailored to the needs of biomaterials for dental applications. The authors conclude that it is possible to use twofold crystallization processes to develop glass-ceramic biomaterials featuring different properties, such as specific radiopacity values, CTEs and optical characteristics.


  • Microstructure of a Ce 0.1 Zr 0.9 O 2 – MgAl 2 O 4 Ceramic Matrix Composite for Use in Dentistry

    by Frank Krumeich, Micheal Wörle, Reinhard Nesper, Marlies Höland, Christian Ritzberger, Frank Rothbrust, Jerome Chevalier, Volker M. Rheinberger, Wolfram Höland

    A ceramic matrix composite ( CMC ) with the chemical composition of 90 wt% Ce 0.1 Zr 0.9 O 2 and 10 wt% MgAl 2 O 4 was produced by filter‐pressing, drying, and heat treatment at 1400°C. The internal microstructure was studied using the transmission electron microscopy ( TEM ) technique combined with energy‐dispersive X ‐ray spectroscopy. Because of the intended use in dentistry, the surfaces of the as‐fired and of the mechanically treated samples were characterized by atomic force microscopy ( AFM ) and X ‐ray diffraction ( XRD Rietveld analysis). This study revealed that Ce 0.1 Zr 0.9 O 2 and MgAl 2 O 4 spinel are the only crystalline phases present in the CMC material. Nevertheless, apart from the tetragonal Ce 0.1 Zr 0.9 O 2 , its monoclinic phase was identified as a third crystal phase in the as‐fired sample with an amount of ~2.5 wt%, at the surface of polished (5.3 wt%) and roughened (8 wt%) specimens. In sum, the microstructure of the CMC material is homogeneous and can be modified by mechanical surface treatment leading to a partial transformation of the tetragonal phase of the Ce 0.1 Zr 0.9 O 2 component into the monoclinic one. This partial transformation is also visible in AFM , with occurrence of transformation bands. The mechanism yield in surface compressive stress can be determined according to the Williamson and Hall method. The authors conclude that the absence of microcrack formation during polishing or roughening confirms the high flaw tolerance of such a CMC material.


  • Coatings on Glass-Ceramic Granules for Dental Restorative Biomaterials

    by Kathrin Michel, Carlo G. Pantano, Christian Ritzberger, Volker Rheinberger, Wolfram Höland


  • Phase evolution in lithium disilicate glass–ceramics based on non-stoichiometric compositions of a multi-component system: structural studies by 29Si single and double resonance solid state NMR

    by Christine Bischoff, Hellmut Eckert, Elke Apel, Volker M. Rheinberger, Wolfram Höland

    The crystallization mechanism of a high-strength lithium disilicate glass–ceramic in the SiO2–Li2O–P2O5–Al2O3–K2O–(ZrO2) system, used as restorative dentistry material, has been examined on the basis of quantitative 29Si magic angle spinning (MAS) and 29Si{7Li} rotational echo double resonance (REDOR) NMR spectroscopy. Crystallization occurs in two stages: near 650 °C a significant fraction of the Q(3) units disproportionates into crystalline Li2SiO3 and Q(4) units. Upon further annealing of this glass–ceramic to 850 °C the crystalline Li2SiO3 phase reacts with the Q(4) units of the softened residual glass matrix, resulting in the crystallization of Li2Si2O5. The NMR experiments provide detailed insight into the spatial distribution of the lithium ions suggesting the absence of lithium ion clustering in the residual glassy component of the final glass–ceramic. 31P MAS-NMR spectra indicate that phosphate acts as a lithium ion scavenger, resulting in the predominant formation of orthophosphate (P(0)) and some pyrophosphate (P(1)) groups. Crystallization of Li2SiO3 occurs concomitantly with the formation of a highly disordered Li3PO4 phase as evidenced from strong linebroadening effects in the 31P MAS-NMR spectra. Well-crystallized Li3PO4 is only formed at annealing conditions resulting in the formation of crystalline lithium disilicate. These results argue against an epitaxial nucleation process previously proposed in the literature and rather suggest that the nucleation of both lithium metasilicate and lithium disilicate starts at the phase boundary between the disordered lithium phosphate phase and the glass matrix.


  • Open Access

    Properties and Clinical Application of Three Types of Dental Glass-Ceramics and Ceramics for CAD-CAM Technologies

    by Christian Ritzberger, Elke Apel, Wolfram Höland, Arnd Peschke, Volker M. Rheinberger

    The main properties (mechanical, thermal and chemical) and clinical application for dental restoration are demonstrated for three types of glass-ceramics and sintered polycrystalline ceramic produced by Ivoclar Vivadent AG. Two types of glass-ceramics are derived from the leucite-type and the lithium disilicate-type. The third type of dental materials represents a ZrO2 ceramic. CAD/CAM technology is a procedure to manufacture dental ceramic restoration. Leucite-type glass-ceramics demonstrate high translucency, preferable optical/mechanical properties and an application as dental inlays, onlays and crowns. Based on an improvement of the mechanical parameters, specially the strength and toughness, the lithium disilicate glass-ceramics are used as crowns; applying a procedure to machine an intermediate product and producing the final glass-ceramic by an additional heat treatment. Small dental bridges of lithium disilicate glass-ceramic were fabricated using a molding technology. ZrO2 ceramics show high toughness and strength and were veneered with fluoroapatite glass-ceramic. Machining is possible with a porous intermediate product.


  • Ceramics as biomaterials for dental restoration

    by Wolfram Höland, Marcel Schweiger, Ronny Watzke, Arnd Peschke, Heinrich Kappert

    Sintered ceramics and glass-ceramics are widely used as biomaterials for dental restoration, especially as dental inlays, onlays, veneers, crowns or bridges. Biomaterials were developed either to veneer metal frameworks or to produce metal-free dental restorations. Different types of glass-ceramics and ceramics are available and necessary today to fulfill customers' needs (patients, dentists and dental technicians) regarding the properties of the biomaterials and the processing of the products. All of these different types of biomaterials already cover the entire range of indications of dental restorations. Today, patients are increasingly interested in metal-free restoration. Glass-ceramics are particularly suitable for fabricating inlays, crowns and small bridges, as these materials achieve very strong, esthetic results. High-strength ceramics are preferred in situations where the material is exposed to high masticatory forces.