Charles A. Wilkie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Charles A. Wilkie has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
David D. Jiang
Department of Chemistry, Marquette University, PO Box 1881, Milwaukee, WI 53201, USA
5 shared publicationsDongyan Wang
Department of Materials Science and Engineering, Cornell University, 416 Bard Hall, Ithaca, NY 14853-1501, USA
5 shared publicationsGuipeng Cai
Department of Chemistry and Fire Retardant Research Facility Marquette University Milwaukee WI 53201 USA
5 shared publicationsShengpei Su
Department of Chemistry and Chemical Engineering, Hunan Normal University, Changsha 410081, China
5 shared publicationsMarius C. Costache
4 shared publicationsThirumal Mariappan
Department of Chemistry and Fire Retardant Research Facility, Marquette University, Milwaukee, WI, USA
4 shared publications
Latest Publications
- 18 April 2014
- Published by Wiley
- p. 347-403
Other Non‐Halogenated Flame Retardant Chemistries and Future Flame Retardant Solutions
- 18 April 2014
- Published by Wiley
- p. 347-403
Other Non‐Halogenated Flame Retardant Chemistries and Future Flame Retardant Solutions
- 23 January 2014
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 25 (4) , 380-387
Effect of nano cadmium sulfide on combustion and thermal decomposition of polystryene and poly(methyl methacrylate)
Cadmium sulfide nano particles, both hollow spheres (CdS‐HS) and rods (CdS‐NR), were synthesized by ultrasonic and solvothermal processes, respectively, and characterized by XRD and SEM. The effect of the two kinds of nano particles on flammability was investigated using the cone calorimeter and microscale combustion calorimeter. The incorporation of small amount of CdS nano particles (1 wt.%, 3 wt.%, 5 wt.%) leads to a reduction in the peak heat release rate (PHRR) compared to pristine PS; CdS‐NR is more efficient in reducing the PHRR. CdS nano particles are less effective in reducing the PHRR of PMMA. Thermal stability of PS/CdS and PMMA/CdS nanocomposites was studied by TGA. The TGA results show that the addition of the nano particles mainly increases thermal stability of PS and PMMA at high temperatures. Copyright © 2014 John Wiley & Sons, Ltd.
- 23 January 2014
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 25 (4) , 380-387
Effect of nano cadmium sulfide on combustion and thermal decomposition of polystryene and poly(methyl methacrylate)
Cadmium sulfide nano particles, both hollow spheres (CdS‐HS) and rods (CdS‐NR), were synthesized by ultrasonic and solvothermal processes, respectively, and characterized by XRD and SEM. The effect of the two kinds of nano particles on flammability was investigated using the cone calorimeter and microscale combustion calorimeter. The incorporation of small amount of CdS nano particles (1 wt.%, 3 wt.%, 5 wt.%) leads to a reduction in the peak heat release rate (PHRR) compared to pristine PS; CdS‐NR is more efficient in reducing the PHRR. CdS nano particles are less effective in reducing the PHRR of PMMA. Thermal stability of PS/CdS and PMMA/CdS nanocomposites was studied by TGA. The TGA results show that the addition of the nano particles mainly increases thermal stability of PS and PMMA at high temperatures. Copyright © 2014 John Wiley & Sons, Ltd.
- 18 December 2013
- Published by SAGE Publications in Journal of Fire Sciences
- Vol. 32 (4) , 346-361
Thermal stability and fire retardancy of polyurea and epoxy nanocomposites using organically modified magadiite
The purpose of this study is to investigate the effect of the surface modification of a layered silicate (magadiite) on the flammability of both polyurea and amine-cured epoxy resin. Based on the surface chemistry of magadiite, both quaternary alkyl ammonium and silane modifier can be employed for the organo-modification. Nanocomposites of both polymers were prepared via ultrasound-assisted in situ polymerization. Dispersion of magadiite was investigated through X-ray diffraction and high-resolution transmission electron microscopy. Thermal stability and flammability were evaluated by thermogravimetric analysis and cone calorimetry, respectively. The addition of small amount of magadiite resulted in significant improvements in flame resistance with not much change in thermal stability for both polymers. Ammonium-modified magadiite improves the flame resistance, whereas silane modification helps to increase time to ignition of both polymers.
- 18 December 2013
- Published by SAGE Publications in Journal of Fire Sciences
- Vol. 32 (4) , 346-361
Thermal stability and fire retardancy of polyurea and epoxy nanocomposites using organically modified magadiite
The purpose of this study is to investigate the effect of the surface modification of a layered silicate (magadiite) on the flammability of both polyurea and amine-cured epoxy resin. Based on the surface chemistry of magadiite, both quaternary alkyl ammonium and silane modifier can be employed for the organo-modification. Nanocomposites of both polymers were prepared via ultrasound-assisted in situ polymerization. Dispersion of magadiite was investigated through X-ray diffraction and high-resolution transmission electron microscopy. Thermal stability and flammability were evaluated by thermogravimetric analysis and cone calorimetry, respectively. The addition of small amount of magadiite resulted in significant improvements in flame resistance with not much change in thermal stability for both polymers. Ammonium-modified magadiite improves the flame resistance, whereas silane modification helps to increase time to ignition of both polymers.
- 13 November 2013
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 25 (2) , 217-222
Further studies on polystyrene/cerium (IV) oxide system: melt blending and interaction with montmorillonite
- 13 November 2013
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 25 (2) , 217-222
Further studies on polystyrene/cerium (IV) oxide system: melt blending and interaction with montmorillonite
- 4 November 2013
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 25 (2) , 160-167
The effects of several sulfonates on thermal and fire retardant properties of poly(methyl methacrylate) and polystyrene
- 4 November 2013
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 25 (2) , 160-167
The effects of several sulfonates on thermal and fire retardant properties of poly(methyl methacrylate) and polystyrene
- 2 August 2013
- Published by Wiley in Fire and Materials
- Vol. 38 (5) , 588-598
Flame retardant epoxy resin for electrical and electronic applications
Amine‐cured epoxy resins were prepared at 2% by weight phosphorus content using four halogen‐free flame retardants; poly(m‐phenylene methyl phosphonate) (Fyrol PMP); 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide; red phosphorus; and aluminum diethylphosphinate (OP1230). The effect of these additives on the properties of cured epoxy, including glass transition temperature, thermal stability, and fire retardancy (cone calorimetry), were studied and were compared with the conventionally used flame retardant, tetrabromobisphenol‐A (TBBA). All properties are improved for the non‐halogenated materials compared with TBBA. Further, the stoichiometric amounts of Fyrol PMP and TBBA (without an external curing agent) were reacted with epoxy to determine if they could be used as a flame retardant and as a curing agent; Fyrol PMP effectively acts as a flame retardant and as a curing agent. Evolved gas analysis is also discussed through thermogravimetric analysis/Fourier transform infrared spectroscopy. Copyright © 2013 John Wiley & Sons, Ltd.
- 2 August 2013
- Published by Wiley in Fire and Materials
- Vol. 38 (5) , 588-598
Flame retardant epoxy resin for electrical and electronic applications
Amine‐cured epoxy resins were prepared at 2% by weight phosphorus content using four halogen‐free flame retardants; poly(m‐phenylene methyl phosphonate) (Fyrol PMP); 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide; red phosphorus; and aluminum diethylphosphinate (OP1230). The effect of these additives on the properties of cured epoxy, including glass transition temperature, thermal stability, and fire retardancy (cone calorimetry), were studied and were compared with the conventionally used flame retardant, tetrabromobisphenol‐A (TBBA). All properties are improved for the non‐halogenated materials compared with TBBA. Further, the stoichiometric amounts of Fyrol PMP and TBBA (without an external curing agent) were reacted with epoxy to determine if they could be used as a flame retardant and as a curing agent; Fyrol PMP effectively acts as a flame retardant and as a curing agent. Evolved gas analysis is also discussed through thermogravimetric analysis/Fourier transform infrared spectroscopy. Copyright © 2013 John Wiley & Sons, Ltd.
- 20 June 2013
- Published by SAGE Publications in Journal of Fire Sciences
- Vol. 32 (1) , 35-42
Fire retardancy of polyurea and silylated α-zirconium phosphate composites with ammonium polyphosphate
The thermal stability and fire performance of polyurea with silylated α-zirconium phosphate and ammonium polyphosphate are studied. The addition of ammonium polyphosphate reduces the thermal stability of the composites with and without silylated α-zirconium phosphate. The peak heat release rate reduction is lower in microscale combustion calorimetry than in cone calorimetry, which suggests that some physical process, like the formation of a barrier, is the process by which fire retardancy is obtained. Based on cone calorimetry, the peak heat release rate reduction does not depend on the loading of the silylated zirconium phosphate, and the combination with ammonium polyphosphate is less effective than ammonium polyphosphate alone.
- 20 June 2013
- Published by SAGE Publications in Journal of Fire Sciences
- Vol. 32 (1) , 35-42
Fire retardancy of polyurea and silylated α-zirconium phosphate composites with ammonium polyphosphate
The thermal stability and fire performance of polyurea with silylated α-zirconium phosphate and ammonium polyphosphate are studied. The addition of ammonium polyphosphate reduces the thermal stability of the composites with and without silylated α-zirconium phosphate. The peak heat release rate reduction is lower in microscale combustion calorimetry than in cone calorimetry, which suggests that some physical process, like the formation of a barrier, is the process by which fire retardancy is obtained. Based on cone calorimetry, the peak heat release rate reduction does not depend on the loading of the silylated zirconium phosphate, and the combination with ammonium polyphosphate is less effective than ammonium polyphosphate alone.
- 16 April 2013
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 24 (7) , 646-652
Fire properties of silylated α‐zirconium phosphate composites based on polystyrene
α‐zirconium phosphate (ZrP) (prepared by both reflux and hydrothermal methods) is silylated with chlorotrimethylsilane and characterized by X‐ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. Polystyrene/silylated‐ZrP composites show higher thermal stability as the ZrP content increases. Cone calorimetry suggests that the reduction of the peak heat release rate of polystyrene (PS)/ZrP composites does not increase as the ZrP loading increases; the aspect ratio of ZrP has little effect in fire performance of PS/ZrP composites. Copyright © 2013 John Wiley & Sons, Ltd.
- 16 April 2013
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 24 (7) , 646-652
Fire properties of silylated α‐zirconium phosphate composites based on polystyrene
α‐zirconium phosphate (ZrP) (prepared by both reflux and hydrothermal methods) is silylated with chlorotrimethylsilane and characterized by X‐ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. Polystyrene/silylated‐ZrP composites show higher thermal stability as the ZrP content increases. Cone calorimetry suggests that the reduction of the peak heat release rate of polystyrene (PS)/ZrP composites does not increase as the ZrP loading increases; the aspect ratio of ZrP has little effect in fire performance of PS/ZrP composites. Copyright © 2013 John Wiley & Sons, Ltd.
- 29 January 2013
- Published by SAGE Publications in Journal of Fire Sciences
- Vol. 31 (4) , 330-338
Cone calorimetric analysis of flame-retarded polyurea for coating applications
A two-component polyurea elastomer is evaluated for fire retardancy using the cone calorimeter and thermal analysis. The content of the fire retardant, aluminum diethylphosphinate, the thickness, and heat flux were varied. Thicker samples (12 mm) containing about 3% phosphorus (~15% aluminum diethylphosphinate) seem to be the best.
- 29 January 2013
- Published by SAGE Publications in Journal of Fire Sciences
- Vol. 31 (4) , 330-338
Cone calorimetric analysis of flame-retarded polyurea for coating applications
A two-component polyurea elastomer is evaluated for fire retardancy using the cone calorimeter and thermal analysis. The content of the fire retardant, aluminum diethylphosphinate, the thickness, and heat flux were varied. Thicker samples (12 mm) containing about 3% phosphorus (~15% aluminum diethylphosphinate) seem to be the best.
- 7 September 2012
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 24 (2) , 204-209
Layered double hydroxide – montmorillonite – a new nano‐dimensional material
- 7 September 2012
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 24 (2) , 204-209
Layered double hydroxide – montmorillonite – a new nano‐dimensional material