Xin Lv
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xin Lv has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Hongda Lu
School of Integrated Circuits and Electronics, Beijing Institute of Technology, Beijing, China
3 shared publications - Yong Liu
School of Integrated Circuits and Electronics, Beijing Institute of Technology, Beijing, China
3 shared publications - Jiashan Liu
School of Information and Electronics, Beijing Institute of Technology, Beijing, China
2 shared publications - Weidong Hu
Beijing Institute of Technology
2 shared publications - Wenlong Zhang
Shanghai Artificial Intelligence Laboratory
2 shared publications - Zhipeng Liu
School of Integrated Circuits and Electronics, Beijing Institute of Technology, Beijing, China
2 shared publications
Latest Publications
- Open Access
- 16 April 2023
- Published by MDPI AG in Electronics
- Vol. 12 (8) , 1878
Design of High-Precision Terahertz Filter Based on Directional Optimization Correction Method
The directional optimization correction (DOC) method is proposed to reduce the performance error between desired and fabricated terahertz (THz) devices. Three 340 GHz terahertz filters with a bandwidth of 20 GHz are designed and fabricated. The traditional global optimization correction (GOC) method and the proposed DOC method are used to optimize and reduce the performance error, respectively. It is garnered that the center frequency error and bandwidth error of the fabricated terahertz filter optimized by the GOC method are reduced to 3.5 GHz (~1.03%) and 2.2 GHz (~11%), respectively. Meanwhile, the center frequency error and bandwidth error of the fabricated terahertz filter optimized by the DOC method are reduced to 0.2 GHz (~0.06%) and 0.4 GHz (~2.0%), respectively, which has fewer optimization parameters and higher accuracy than the GOC method. Furthermore, the in-band return loss (RL) of two optimized terahertz filters based on the DOC and GOC methods is less than 15 dB, and the in-band insertion loss (IL) is less than 2.3 dB.
- 16 April 2023
- Published by MDPI AG in Electronics
- Vol. 12 (8) , 1878
Open AccessDesign of High-Precision Terahertz Filter Based on Directional Optimization Correction Method
The directional optimization correction (DOC) method is proposed to reduce the performance error between desired and fabricated terahertz (THz) devices. Three 340 GHz terahertz filters with a bandwidth of 20 GHz are designed and fabricated. The traditional global optimization correction (GOC) method and the proposed DOC method are used to optimize and reduce the performance error, respectively. It is garnered that the center frequency error and bandwidth error of the fabricated terahertz filter optimized by the GOC method are reduced to 3.5 GHz (~1.03%) and 2.2 GHz (~11%), respectively. Meanwhile, the center frequency error and bandwidth error of the fabricated terahertz filter optimized by the DOC method are reduced to 0.2 GHz (~0.06%) and 0.4 GHz (~2.0%), respectively, which has fewer optimization parameters and higher accuracy than the GOC method. Furthermore, the in-band return loss (RL) of two optimized terahertz filters based on the DOC and GOC methods is less than 15 dB, and the in-band insertion loss (IL) is less than 2.3 dB.
- 12 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (8) , 1853-1857
E-Plane-Focused Partial Maxwell Fish-Eye Lens Antenna for Multibeam Wide-Angle Scanning
This letter presents a multi-beam wide-angle scanning antenna based on the E-plane-focused partial Maxwell fish-eye (PMFE) lens operating in Ka-band. The gradient equivalent refractive index distribution of the lens is realized by the parallel plate waveguide (PPW) partially filled with dielectric material, which can support the E-plane focus. The lens is fed by a series of rectangular waveguides arranged along the straight cut line to realize the multiple beams. To improve the impedance matching, the dielectric wedges are loaded in the interface between the feeders and the lens. The E-plane broadening of waveguide feeding ports effectively alleviates the gain drop of wide-angle scanning. The measured results of the prototype show a beam scanning range more than ±90° with the aperture efficiencies between 57% and 85.7%. The good impedance matching is also obtained in the operating band. The proposed PMFE lens antenna has the application potential in the low-cost millimeter wave (MMW) multi-beam systems.
- 12 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (8) , 1853-1857
E-Plane-Focused Partial Maxwell Fish-Eye Lens Antenna for Multibeam Wide-Angle Scanning
This letter presents a multi-beam wide-angle scanning antenna based on the E-plane-focused partial Maxwell fish-eye (PMFE) lens operating in Ka-band. The gradient equivalent refractive index distribution of the lens is realized by the parallel plate waveguide (PPW) partially filled with dielectric material, which can support the E-plane focus. The lens is fed by a series of rectangular waveguides arranged along the straight cut line to realize the multiple beams. To improve the impedance matching, the dielectric wedges are loaded in the interface between the feeders and the lens. The E-plane broadening of waveguide feeding ports effectively alleviates the gain drop of wide-angle scanning. The measured results of the prototype show a beam scanning range more than ±90° with the aperture efficiencies between 57% and 85.7%. The good impedance matching is also obtained in the operating band. The proposed PMFE lens antenna has the application potential in the low-cost millimeter wave (MMW) multi-beam systems.
- Open Access
- 26 December 2022
- Published by MDPI AG in Preprints.org
Reconfigurable Intelligent Surfaces for 6G: Applications, Challenges and Solutions
It is expected that scholars will continue to strengthen the depth and breadth of theoretical research on RIS, so as to provide a higher theoretical upper bound for the engineering application of RIS. While making breakthroughs in academic research, great progress has been made in engineering application research and industrialization promotion. This article will provide an overview of RIS engineering applications, mainly including the typical features, typical classifications, and typical deployment scenarios of RIS. Then the challenges and candidate solutions of the RIS are systematically and deeply analyzed, involving the cascade channel decoupling for solving the RIS beamforming, the influences and solutions of RIS regulation constraints, RIS system architecture of network controlled mode, the integrated channel regulation and information modulation, TDD mechanism used for RIS. Future trends and challenges are also provided.
- 26 December 2022
- Published by MDPI AG in Preprints.org
Open AccessReconfigurable Intelligent Surfaces for 6G: Applications, Challenges and Solutions
It is expected that scholars will continue to strengthen the depth and breadth of theoretical research on RIS, so as to provide a higher theoretical upper bound for the engineering application of RIS. While making breakthroughs in academic research, great progress has been made in engineering application research and industrialization promotion. This article will provide an overview of RIS engineering applications, mainly including the typical features, typical classifications, and typical deployment scenarios of RIS. Then the challenges and candidate solutions of the RIS are systematically and deeply analyzed, involving the cascade channel decoupling for solving the RIS beamforming, the influences and solutions of RIS regulation constraints, RIS system architecture of network controlled mode, the integrated channel regulation and information modulation, TDD mechanism used for RIS. Future trends and challenges are also provided.
- 11 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (10) , 1734-1738
A 3-D-Printed Wideband Circularly Polarized Dielectric Reflectarray of Cross-Shaped Element
A novel wideband circularly polarized (CP) dielectric reflectarray operating at Ka band is proposed. Each element consists of a cross-shaped dielectric block and a metal ground. The two arms of the cross element are arranged along the diagonal of the square metal floor. For ease of the design, dimensional scaling factor is used to obtain the reflection phase. The dielectric reflectarray of the size 1515 and dielectric constant 9.8 is designed. Genetic algorithm is applied to optimize the element size. It is found that the maximum gain is 24.2 dBi and 1 dB gain bandwidth is 10.7%, respectively. A broad 3 dB axial ratio bandwidth of 19.3% can also be obtained. The proposed CP antenna is fabricated using the high precision 3D printing technology. Relatively good agreement between the simulated and measured results is achieved.
- 11 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (10) , 1734-1738
A 3-D-Printed Wideband Circularly Polarized Dielectric Reflectarray of Cross-Shaped Element
A novel wideband circularly polarized (CP) dielectric reflectarray operating at Ka band is proposed. Each element consists of a cross-shaped dielectric block and a metal ground. The two arms of the cross element are arranged along the diagonal of the square metal floor. For ease of the design, dimensional scaling factor is used to obtain the reflection phase. The dielectric reflectarray of the size 1515 and dielectric constant 9.8 is designed. Genetic algorithm is applied to optimize the element size. It is found that the maximum gain is 24.2 dBi and 1 dB gain bandwidth is 10.7%, respectively. A broad 3 dB axial ratio bandwidth of 19.3% can also be obtained. The proposed CP antenna is fabricated using the high precision 3D printing technology. Relatively good agreement between the simulated and measured results is achieved.
- 16 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (5) , 806-810
Compact Fully Metallic Millimeter-Wave Waveguide-Fed Periodic Leaky-Wave Antenna Based on Corrugated Parallel-Plate Waveguides
A compact fully metallic millimeter-wave (MMW) periodic leaky-wave antenna (LWA) based on corrugated parallel-plate waveguides (PPW) with high radiation efficiency and low machining complexity is presented in this letter. The LWA consists of a smooth plate and a corrugated plate which integrates the corrugation for slow-wave transmission line and the radiating slots. By introducing two different elements into one radiating unit, the open stopband effect is improved and the broadside scanning is realized. As an experimental verification, a prototype in Ka-band is designed, fabricated, and measured. The scanning beams with an angular range of 48° (from -42.5° to 5.5°) and the peak gains between 11.9 and 16.0 dBi are obtained in the frequency range from 28 GHz to 40 GHz. The radiation efficiency is higher than 85%. The results indicate its application potential in the MMW imaging and radar systems.
- 16 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (5) , 806-810
Compact Fully Metallic Millimeter-Wave Waveguide-Fed Periodic Leaky-Wave Antenna Based on Corrugated Parallel-Plate Waveguides
A compact fully metallic millimeter-wave (MMW) periodic leaky-wave antenna (LWA) based on corrugated parallel-plate waveguides (PPW) with high radiation efficiency and low machining complexity is presented in this letter. The LWA consists of a smooth plate and a corrugated plate which integrates the corrugation for slow-wave transmission line and the radiating slots. By introducing two different elements into one radiating unit, the open stopband effect is improved and the broadside scanning is realized. As an experimental verification, a prototype in Ka-band is designed, fabricated, and measured. The scanning beams with an angular range of 48° (from -42.5° to 5.5°) and the peak gains between 11.9 and 16.0 dBi are obtained in the frequency range from 28 GHz to 40 GHz. The radiation efficiency is higher than 85%. The results indicate its application potential in the MMW imaging and radar systems.
- 26 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 68 (7) , 5061-5070
Fully Metallic Anisotropic Lens Crossover-in-Antenna Based on Parallel Plate Waveguide Loaded With Uniform Posts
This paper presents a Ka-band fully metallic crossover-in-antenna based on an anisotropic lens. The crossover-in-antenna is a multi-function device simultaneously acting as a waveguide crossover and a multibeam antenna. The anisotropic lens performs like a Maxwell fish-eye (MFE) lens and a Luneburg lens in different incident directions, supporting the transmission and radiation respectively. The lens consists of a parallel plate waveguide (PPW) with gradient spacing loaded with periodic uniform cuboid posts, which can be treated as an array of anisotropic sub-wavelength unit-cells with gradient equivalent refractive indices. The WR28 waveguides are employed as the input/output ports. A flare is added to improve the radiation and impedance matching of antenna channels. According to the experimental results, a waveguide crossover is well realized with the reflection coefficients lower than -15 dB and insertion losses mostly lower than 1.4 dB from 28.7 GHz to 38.2 GHz. Meanwhile, a multibeam antenna with four independent beams is obtained in the whole Ka-band, showing the gains higher than 12.5 dBi and the radiation efficiencies higher than 87.8%. The results indicate that the proposed crossover-in-antenna has application potential in the high-density multi-function integration of millimeter-wave (mmW) systems.
- 26 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 68 (7) , 5061-5070
Fully Metallic Anisotropic Lens Crossover-in-Antenna Based on Parallel Plate Waveguide Loaded With Uniform Posts
This paper presents a Ka-band fully metallic crossover-in-antenna based on an anisotropic lens. The crossover-in-antenna is a multi-function device simultaneously acting as a waveguide crossover and a multibeam antenna. The anisotropic lens performs like a Maxwell fish-eye (MFE) lens and a Luneburg lens in different incident directions, supporting the transmission and radiation respectively. The lens consists of a parallel plate waveguide (PPW) with gradient spacing loaded with periodic uniform cuboid posts, which can be treated as an array of anisotropic sub-wavelength unit-cells with gradient equivalent refractive indices. The WR28 waveguides are employed as the input/output ports. A flare is added to improve the radiation and impedance matching of antenna channels. According to the experimental results, a waveguide crossover is well realized with the reflection coefficients lower than -15 dB and insertion losses mostly lower than 1.4 dB from 28.7 GHz to 38.2 GHz. Meanwhile, a multibeam antenna with four independent beams is obtained in the whole Ka-band, showing the gains higher than 12.5 dBi and the radiation efficiencies higher than 87.8%. The results indicate that the proposed crossover-in-antenna has application potential in the high-density multi-function integration of millimeter-wave (mmW) systems.
- Open Access
- 30 March 2019
- Published by MDPI AG in Remote Sensing
- Vol. 11 (7) , 771
Spatial Resolution Enhancement of Satellite Microwave Radiometer Data with Deep Residual Convolutional Neural Network
Satellite microwave radiometer data is affected by many degradation factors during the imaging process, such as the sampling interval, antenna pattern and scan mode, etc., leading to spatial resolution reduction. In this paper, a deep residual convolutional neural network (CNN) is proposed to solve these degradation problems by learning the end-to-end mapping between low-and high-resolution images. Unlike traditional methods that handle each degradation factor separately, our network jointly learns both the sampling interval limitation and the comprehensive degeneration factors, including the antenna pattern, receiver sensitivity and scan mode, during the training process. Moreover, due to the powerful mapping capability of the deep residual CNN, our method achieves better resolution enhancement results both quantitatively and qualitatively than the methods in literature. The microwave radiation imager (MWRI) data from the Fengyun-3C (FY-3C) satellite has been used to demonstrate the validity and the effectiveness of the method.
- 30 March 2019
- Published by MDPI AG in Remote Sensing
- Vol. 11 (7) , 771
Open AccessSpatial Resolution Enhancement of Satellite Microwave Radiometer Data with Deep Residual Convolutional Neural Network
Satellite microwave radiometer data is affected by many degradation factors during the imaging process, such as the sampling interval, antenna pattern and scan mode, etc., leading to spatial resolution reduction. In this paper, a deep residual convolutional neural network (CNN) is proposed to solve these degradation problems by learning the end-to-end mapping between low-and high-resolution images. Unlike traditional methods that handle each degradation factor separately, our network jointly learns both the sampling interval limitation and the comprehensive degeneration factors, including the antenna pattern, receiver sensitivity and scan mode, during the training process. Moreover, due to the powerful mapping capability of the deep residual CNN, our method achieves better resolution enhancement results both quantitatively and qualitatively than the methods in literature. The microwave radiation imager (MWRI) data from the Fengyun-3C (FY-3C) satellite has been used to demonstrate the validity and the effectiveness of the method.
- Open Access
- 10 February 2018
- Published by MDPI AG in Remote Sensing
- Vol. 10 (2) , 275
A Deconvolution Technology of Microwave Radiometer Data Using Convolutional Neural Networks
Microwave radiometer data is affected by many factors during the imaging process, including the antenna pattern, system noise, and the curvature of the Earth. Existing deconvolution methods such as Wiener filtering handle this degradation problem in the Fourier domain. However, under complex degradation conditions, the Wiener filtering results are not accurate. In this paper, a convolutional neural network (CNN) model is proposed to solve the degradation problem. The deconvolution procedure is defined as a regression problem in the spatial domain that can be solved with deep learning. For the real inverse process of microwave radiometer data, the CNN model has a more powerful reconstruction ability than Wiener filtering due to the multi-layer structure of the CNN, which enables the multiple feature transform of the data. Additionally, the complex degradation factor during the imaging process of a microwave radiometer can be solved with general framework-based learning. Experimental results demonstrated that the CNN model gains about 5 dB at the peak signal-to-noise ratio compared to the Wiener filtering deconvolution method, and can better distinguish the measured data.
- 10 February 2018
- Published by MDPI AG in Remote Sensing
- Vol. 10 (2) , 275
Open AccessA Deconvolution Technology of Microwave Radiometer Data Using Convolutional Neural Networks
Microwave radiometer data is affected by many factors during the imaging process, including the antenna pattern, system noise, and the curvature of the Earth. Existing deconvolution methods such as Wiener filtering handle this degradation problem in the Fourier domain. However, under complex degradation conditions, the Wiener filtering results are not accurate. In this paper, a convolutional neural network (CNN) model is proposed to solve the degradation problem. The deconvolution procedure is defined as a regression problem in the spatial domain that can be solved with deep learning. For the real inverse process of microwave radiometer data, the CNN model has a more powerful reconstruction ability than Wiener filtering due to the multi-layer structure of the CNN, which enables the multiple feature transform of the data. Additionally, the complex degradation factor during the imaging process of a microwave radiometer can be solved with general framework-based learning. Experimental results demonstrated that the CNN model gains about 5 dB at the peak signal-to-noise ratio compared to the Wiener filtering deconvolution method, and can better distinguish the measured data.
- 18 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 66 (2) , 1058-1069
Compact and Wideband Millimeter-Wave Antenna-Coupled Detector
This paper presents a compact and wideband millimeter-wave antenna-coupled detector, with a Schottky diode directly integrated across the feeding terminals of a planar dipole. An integrated wideband dipole is proposed, as a radiator as well as a radio frequency choke. It contains a pair of folded strips for broadening the bandwidth and a pair of U-slot resonators for sidelobe reduction, both of which facilitate the compact design. To form unidirectional radiation with a low profile, a hybrid reactive impedance surface is presented, which can simultaneously enhance the gain and impedance bandwidths covering the full Ka-band. An equivalent circuit model is provided to illustrate the operating mechanism of this antenna-coupled detector, and the mounting effect caused by the diode is examined. A Ka-band prototype with dimensions of about 1.12λ 0 × 1.12λ 0 × 0.08λ 0 is fabricated and characterized, exhibiting a responsivity between 1500 and 3800 V/W over the full Ka-band. The proposed design has the advantages of broad bandwidth, low profile, small footprint, and mechanically stable structure. It can be fabricated using low-cost printed circuit technology, and can easily be configured into a planar 2-D array, making it suitable for low-cost sensing and imaging applications based on small unmanned aerial vehicles.
- 18 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 66 (2) , 1058-1069
Compact and Wideband Millimeter-Wave Antenna-Coupled Detector
This paper presents a compact and wideband millimeter-wave antenna-coupled detector, with a Schottky diode directly integrated across the feeding terminals of a planar dipole. An integrated wideband dipole is proposed, as a radiator as well as a radio frequency choke. It contains a pair of folded strips for broadening the bandwidth and a pair of U-slot resonators for sidelobe reduction, both of which facilitate the compact design. To form unidirectional radiation with a low profile, a hybrid reactive impedance surface is presented, which can simultaneously enhance the gain and impedance bandwidths covering the full Ka-band. An equivalent circuit model is provided to illustrate the operating mechanism of this antenna-coupled detector, and the mounting effect caused by the diode is examined. A Ka-band prototype with dimensions of about 1.12λ 0 × 1.12λ 0 × 0.08λ 0 is fabricated and characterized, exhibiting a responsivity between 1500 and 3800 V/W over the full Ka-band. The proposed design has the advantages of broad bandwidth, low profile, small footprint, and mechanically stable structure. It can be fabricated using low-cost printed circuit technology, and can easily be configured into a planar 2-D array, making it suitable for low-cost sensing and imaging applications based on small unmanned aerial vehicles.
- Open Access
- 1 April 2017
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 53 (8) , 538-540
220 GHz high spatial resolution detector with above‐chip mounted dielectric lens
A novel and low‐cost solution to improve the radiation patterns of the on‐chip patch antenna at 220 GHz is proposed. The radiation performances are enhanced by mounting the lens on the patch. The air cavity in the lens not only reduces the focal length, but also provides space for chip integration. The imaging chip and antenna are fabricated and an experimental platform is built. The responsivity and radiation patterns are measured. The 3 dB beamwidths of the with‐lens detector in the E and H planes are 8° and 7°, respectively. Good agreement between the simulated and measured results is obtained.
- 1 April 2017
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 53 (8) , 538-540
Open Access220 GHz high spatial resolution detector with above‐chip mounted dielectric lens
A novel and low‐cost solution to improve the radiation patterns of the on‐chip patch antenna at 220 GHz is proposed. The radiation performances are enhanced by mounting the lens on the patch. The air cavity in the lens not only reduces the focal length, but also provides space for chip integration. The imaging chip and antenna are fabricated and an experimental platform is built. The responsivity and radiation patterns are measured. The 3 dB beamwidths of the with‐lens detector in the E and H planes are 8° and 7°, respectively. Good agreement between the simulated and measured results is obtained.