Halil Turgut Sahin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Halil Turgut Sahin has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Mustafa Burak Arslan
Suleyman Demirel University, Forestry Faculty, Department of Forest Products Engineering, 32260 Isparta, Turkey
2 shared publications Candan Sahin
Department of Landscape and Ornamental Plants, Egirdir Vocational School, Suleyman Demirel University, Egirdir-Isparta, Turkey
1 shared publicationM. Burak Arslan
Department of Forest Products Engineering, Faculty of Forestry, Suleyman Demirel University, 32260 Isparta, Turkey
1 shared publication- Süleyman Korkut
Düzce University
1 shared publication
Latest Publications
- Open Access
- 10 January 2016
- Published by Sciencedomain International in Journal of Advances in Biology & Biotechnology
- Vol. 6 (2) , 1-6
Properties of Particleboards Produced from Poppy (Papaver somniferum L.) Stalks
The objective of this work was to examine the suitability of poppy stalks for particleboard manufacturing. One-layer experimental panel with density of 0.45; 0.55 and 0.65 g/cm3 made from poppy stalks utilizing 8-10% urea-formaldehyde (UF) resin. The experimental boards were evaluated for Modulus of Rupture (MOR), Modulus of Elasticity (MOE), Internal Bond strength (IB), Surface Strength (SS), Thickness Swelling (TS) according to related standards. The mechanical properties of boards shown that poppy stalks could be an appropriate raw material for particleboards production. The result clearly indicated that mechanical properties of poppy based boards improved with an increase panel density and adhesive ratio. Panels produced 0.55 g/cm3 density with 10% UF adhesive and 0.65 g/cm3 density with 8% UF adhesive exceed TS EN standard for MOR, MOE, IB, and SS properties.
- 10 January 2016
- Published by Sciencedomain International in Journal of Advances in Biology & Biotechnology
- Vol. 6 (2) , 1-6
Open AccessProperties of Particleboards Produced from Poppy (Papaver somniferum L.) Stalks
The objective of this work was to examine the suitability of poppy stalks for particleboard manufacturing. One-layer experimental panel with density of 0.45; 0.55 and 0.65 g/cm3 made from poppy stalks utilizing 8-10% urea-formaldehyde (UF) resin. The experimental boards were evaluated for Modulus of Rupture (MOR), Modulus of Elasticity (MOE), Internal Bond strength (IB), Surface Strength (SS), Thickness Swelling (TS) according to related standards. The mechanical properties of boards shown that poppy stalks could be an appropriate raw material for particleboards production. The result clearly indicated that mechanical properties of poppy based boards improved with an increase panel density and adhesive ratio. Panels produced 0.55 g/cm3 density with 10% UF adhesive and 0.65 g/cm3 density with 8% UF adhesive exceed TS EN standard for MOR, MOE, IB, and SS properties.
- 1 January 2011
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 25 (6-7) , 685-697
Application of RF Argon Plasma to Enhance Hydrophobic Properties of Fluoropolymer Pre-deposited Paper
Tetrafluoroethane (TFE) pre-deposited paper substrates were exposed to an inert gas (argon) plasma environment in order to convert the hydrophilic to hydrophobic surfaces via grafting and/or cross-linking of the fluorinated layer on the surface of paper, while also improving coating uniformity. The XPS spectrum indicates changes in the nature and relative ratios of the surface functionalities. The application of 300 W RF-power argon plasma (at 10 min and 300 mTorr) created a very highly hydrophobic character (water contact angle, = 120°). A typical high resolution (HR) C1s XPS spectrum of argon-plasma treated TFE pre-deposited paper contains four distinct peaks at 285 (C–C), 285.7 (C–CF), 286.7 (C–O and C–CF2) and 291 eV (CF2–C) binding energies. The C1s region indicates narrowing of the spectrum and complete removal of the CF3–CF (292.5 eV) peak. This change in the shape of HR C1s spectrum also indicates loss of fluorine from the TFE pre-deposited paper with argon exposure compared to only TFE pre-deposited paper. The high-energy argon ions appear to etch the uppermost region, leading to micro-roughening of the paper surface. AFM micrographs reveal re-arrangement of the paper surface with argon plasma exposure. The water absorption of paper coated with TFE alone only decreased by 1.3%. However, after argonplasma treatment of the TFE pre-deposited paper, the water absorption was reduced aproximately by 22% compared to virgin paper.
- 1 January 2011
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 25 (6-7) , 685-697
Application of RF Argon Plasma to Enhance Hydrophobic Properties of Fluoropolymer Pre-deposited Paper
Tetrafluoroethane (TFE) pre-deposited paper substrates were exposed to an inert gas (argon) plasma environment in order to convert the hydrophilic to hydrophobic surfaces via grafting and/or cross-linking of the fluorinated layer on the surface of paper, while also improving coating uniformity. The XPS spectrum indicates changes in the nature and relative ratios of the surface functionalities. The application of 300 W RF-power argon plasma (at 10 min and 300 mTorr) created a very highly hydrophobic character (water contact angle, = 120°). A typical high resolution (HR) C1s XPS spectrum of argon-plasma treated TFE pre-deposited paper contains four distinct peaks at 285 (C–C), 285.7 (C–CF), 286.7 (C–O and C–CF2) and 291 eV (CF2–C) binding energies. The C1s region indicates narrowing of the spectrum and complete removal of the CF3–CF (292.5 eV) peak. This change in the shape of HR C1s spectrum also indicates loss of fluorine from the TFE pre-deposited paper with argon exposure compared to only TFE pre-deposited paper. The high-energy argon ions appear to etch the uppermost region, leading to micro-roughening of the paper surface. AFM micrographs reveal re-arrangement of the paper surface with argon plasma exposure. The water absorption of paper coated with TFE alone only decreased by 1.3%. However, after argonplasma treatment of the TFE pre-deposited paper, the water absorption was reduced aproximately by 22% compared to virgin paper.
- 7 October 2010
- Published by Wiley in Color Research & Application
- Vol. 36 (6) , 462-466
Colour changes of heat‐treated woods of red‐bud maple, European hophornbeam and oak
Colour evolution and colour changes were analyzed from small specimens of three heat treated wood species using the CIE L*a*b* colour space. Upon heat exposure, the wood substance became darker of species; this was accompanied by a steady reduction in lightness. As treatment conditions (e.g., time and temperature) increase, various shades of yellow were favoured for the surface of red‐bud maple wood (Δb = 1.22–9.79). For European hophornbeam wood, increased times at elevated temperatures make a blue (−b) colour the better choice. The total colour difference (ΔE) of the surfaces of wood substrates appear to be well correlated with the treatment temperature and time. The FTIR spectra suggest that the level of modification was insufficient for removing the major cell wall constituents of the wood substrates.All heat‐treated samples showed much less stability against colour difference in outdoor conditions. For red‐bud maple, the greatest improvement was achieved for samples that were treated at 150°C for 2 h (ΔE = 3.12). However, heat‐treated oak wood hadmuch less stability of colour difference for treatment conditions of 150°C for 10 h. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010.
- 7 October 2010
- Published by Wiley in Color Research & Application
- Vol. 36 (6) , 462-466
Colour changes of heat‐treated woods of red‐bud maple, European hophornbeam and oak
Colour evolution and colour changes were analyzed from small specimens of three heat treated wood species using the CIE L*a*b* colour space. Upon heat exposure, the wood substance became darker of species; this was accompanied by a steady reduction in lightness. As treatment conditions (e.g., time and temperature) increase, various shades of yellow were favoured for the surface of red‐bud maple wood (Δb = 1.22–9.79). For European hophornbeam wood, increased times at elevated temperatures make a blue (−b) colour the better choice. The total colour difference (ΔE) of the surfaces of wood substrates appear to be well correlated with the treatment temperature and time. The FTIR spectra suggest that the level of modification was insufficient for removing the major cell wall constituents of the wood substrates.All heat‐treated samples showed much less stability against colour difference in outdoor conditions. For red‐bud maple, the greatest improvement was achieved for samples that were treated at 150°C for 2 h (ΔE = 3.12). However, heat‐treated oak wood hadmuch less stability of colour difference for treatment conditions of 150°C for 10 h. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010.
- Open Access
- 25 January 2008
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 9 (1) , 78-88
A Study on Physical and Chemical Properties of Cellulose Paper Immersed in Various Solvent Mixtures
The cellulose paper treated in proportional mixture systems showed higher liquid absorption compare to only EtOH and MeOH treatments. It was approximately 40-70% and 50-91% higher for EtOH-NaOH and MeOH-NaOH treated papers, respectively. All conditions apparently bring about an effect of decreased strength for papers. The lowest tensile strength of 13.0 N/mm was found with EtOH and NaOH treated samples after 5th repeating wetting-drying stage. But, some conditions gave approximately 21-59.5% higher stretch than untreated samples. The pore size distributions of papers were evaluated with Simons stain procedure and experimental results usually consisted with sorption data. The less intense CH2-CH2- vibrations (1450-1700 cm-1) and C-C and C-O-C peak areas in FTIR spectra indicates lowering H-bonds in solvent treated and dried paper network structure.
- 25 January 2008
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 9 (1) , 78-88
Open AccessA Study on Physical and Chemical Properties of Cellulose Paper Immersed in Various Solvent Mixtures
The cellulose paper treated in proportional mixture systems showed higher liquid absorption compare to only EtOH and MeOH treatments. It was approximately 40-70% and 50-91% higher for EtOH-NaOH and MeOH-NaOH treated papers, respectively. All conditions apparently bring about an effect of decreased strength for papers. The lowest tensile strength of 13.0 N/mm was found with EtOH and NaOH treated samples after 5th repeating wetting-drying stage. But, some conditions gave approximately 21-59.5% higher stretch than untreated samples. The pore size distributions of papers were evaluated with Simons stain procedure and experimental results usually consisted with sorption data. The less intense CH2-CH2- vibrations (1450-1700 cm-1) and C-C and C-O-C peak areas in FTIR spectra indicates lowering H-bonds in solvent treated and dried paper network structure.