Ermitas Alcalde
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ermitas Alcalde has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Neus Mesquida
Laboratori de Química Orgànica, Facultat de Farmàcia, Universitat de Barcelona, Avda. Joan XXIII s/n, 08028 Barcelona, Spain
10 shared publications- Immaculada Dinarès
Laboratori de Química Orgànica, Facultat de Farmàcia, Universitat de Barcelona, Avda. Joan XXIII s/n, Barcelona, Spain
8 shared publications Jordi Frigola
Dokuz Eylul University
5 shared publications- Lluïsa Pérez-García
Departament de Farmacologia, Toxicologia i Química Terapèutica, Universitat de Barcelona, Avda. Joan XXIII 27-31, 08028 Barcelona, Spain
5 shared publications - Neus Mesquida
Laboratori de Química Orgànica, Facultat de Farmàcia, Universitat de Barcelona, Avda. Joan XXIII s/n, 08028 Barcelona, Spain
4 shared publications Sandra Rodríguez
Laboratori de Química Orgànica, Facultat de Farmàcia, Universitat de Barcelona, Avda. Joan XXIII s/n, Barcelona, Spain
4 shared publications
Latest Publications
- 1 August 2013
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 11 (37) , 6385-6396
[14]Heterophane prototypes containing azolium and/or azole anion-binding motifs
Revisiting a ‘3 + 1’ convergent stepwise strategy permitted the synthesis of [14]imidazoliophane 2·2Br in excellent yield for a macrocyclization. The new [14]triazoliophane 3 and bis(1,2,3-triazolium) counterpart 4·2Cl were less synthetically accessible and the hybrid derivative 5·Cl proved troublesome to prepare. Triazolophane 3 was devoid of anion-binding affinities, while charged [14]heterophane prototypes showed a particular preference for acetate. When association constants were compared, dicationic systems 2·2PF6 and 4·2PF6 showed greater values than monocationic macrocycle 5·PF6, and the highest affinities corresponded to the bis(imidazolium) receptor 2·2PF6.
- 1 August 2013
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 11 (37) , 6385-6396
[14]Heterophane prototypes containing azolium and/or azole anion-binding motifs
Revisiting a ‘3 + 1’ convergent stepwise strategy permitted the synthesis of [14]imidazoliophane 2·2Br in excellent yield for a macrocyclization. The new [14]triazoliophane 3 and bis(1,2,3-triazolium) counterpart 4·2Cl were less synthetically accessible and the hybrid derivative 5·Cl proved troublesome to prepare. Triazolophane 3 was devoid of anion-binding affinities, while charged [14]heterophane prototypes showed a particular preference for acetate. When association constants were compared, dicationic systems 2·2PF6 and 4·2PF6 showed greater values than monocationic macrocycle 5·PF6, and the highest affinities corresponded to the bis(imidazolium) receptor 2·2PF6.
- Open Access
A Simple Halide-to-Anion Exchange Method for Heteroaromatic Salts and Ionic Liquids
A broad and simple method permitted halide ions in quaternary heteroaromatic and ammonium salts to be exchanged for a variety of anions using an anion exchange resin (A− form) in non-aqueous media. The anion loading of the AER (OH− form) was examined using two different anion sources, acids or ammonium salts, and changing the polarity of the solvents. The AER (A− form) method in organic solvents was then applied to several quaternary heteroaromatic salts and ILs, and the anion exchange proceeded in excellent to quantitative yields, concomitantly removing halide impurities. Relying on the hydrophobicity of the targeted ion pair for the counteranion swap, organic solvents with variable polarity were used, such as CH3OH, CH3CN and the dipolar nonhydroxylic solvent mixture CH3CN:CH2Cl2 (3:7) and the anion exchange was equally successful with both lipophilic cations and anions.
Open AccessA Simple Halide-to-Anion Exchange Method for Heteroaromatic Salts and Ionic Liquids
A broad and simple method permitted halide ions in quaternary heteroaromatic and ammonium salts to be exchanged for a variety of anions using an anion exchange resin (A− form) in non-aqueous media. The anion loading of the AER (OH− form) was examined using two different anion sources, acids or ammonium salts, and changing the polarity of the solvents. The AER (A− form) method in organic solvents was then applied to several quaternary heteroaromatic salts and ILs, and the anion exchange proceeded in excellent to quantitative yields, concomitantly removing halide impurities. Relying on the hydrophobicity of the targeted ion pair for the counteranion swap, organic solvents with variable polarity were used, such as CH3OH, CH3CN and the dipolar nonhydroxylic solvent mixture CH3CN:CH2Cl2 (3:7) and the anion exchange was equally successful with both lipophilic cations and anions.
- Open Access
- 29 December 2011
- Published by Beilstein Institut in Beilstein Journal of Organic Chemistry
- Vol. 7 (1) , 1739-1744
Synthetic approaches to multifunctional indenes
The synthesis of multifunctional indenes with at least two different functional groups has not yet been extensively explored. Among the plausible synthetic routes to 3,5-disubstituted indenes bearing two different functional groups, such as the [3-(aminoethyl)inden-5-yl)]amines, a reasonable pathway involves the (5-nitro-3-indenyl)acetamides as key intermediates. Although several multistep synthetic approaches can be applied to obtain these advanced intermediates, we describe herein their preparation by an aldol-type reaction between 5-nitroindan-1-ones and the lithium salt of N,N-disubstituted acetamides, followed immediately by dehydration with acid. This classical condensation process, which is neither simple nor trivial despite its apparent directness, permits an efficient entry to a variety of indene-based molecular modules, which could be adapted to a range of functionalized indanones.
- 29 December 2011
- Published by Beilstein Institut in Beilstein Journal of Organic Chemistry
- Vol. 7 (1) , 1739-1744
Open AccessSynthetic approaches to multifunctional indenes
The synthesis of multifunctional indenes with at least two different functional groups has not yet been extensively explored. Among the plausible synthetic routes to 3,5-disubstituted indenes bearing two different functional groups, such as the [3-(aminoethyl)inden-5-yl)]amines, a reasonable pathway involves the (5-nitro-3-indenyl)acetamides as key intermediates. Although several multistep synthetic approaches can be applied to obtain these advanced intermediates, we describe herein their preparation by an aldol-type reaction between 5-nitroindan-1-ones and the lithium salt of N,N-disubstituted acetamides, followed immediately by dehydration with acid. This classical condensation process, which is neither simple nor trivial despite its apparent directness, permits an efficient entry to a variety of indene-based molecular modules, which could be adapted to a range of functionalized indanones.
- 17 November 2011
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 2012 (2) , 298-304
A Halide-for-Anion Swap Using an Anion-Exchange Resin (A- Form) Method: Revisiting Imidazolium-Based Anion Receptors and Sensors
- 17 November 2011
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 2012 (2) , 298-304
A Halide-for-Anion Swap Using an Anion-Exchange Resin (A- Form) Method: Revisiting Imidazolium-Based Anion Receptors and Sensors
- 1 January 2011
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 47 (11) , 3266-3268
A general halide-to-anion switch for imidazolium-based ionic liquids and oligocationic systems using anion exchange resins (A− form)
Further studies on the application of an AER (A− form) method broadened the anion exchange scope of representative ionic liquids and bis(imidazolium) systems. Depending on the hydrophobicity nature of the targeted imidazolium species and counteranions, different organic solvents were used to swap halides for assorted anions, proceeding in excellent to quantitative yields.
- 1 January 2011
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 47 (11) , 3266-3268
A general halide-to-anion switch for imidazolium-based ionic liquids and oligocationic systems using anion exchange resins (A− form)
Further studies on the application of an AER (A− form) method broadened the anion exchange scope of representative ionic liquids and bis(imidazolium) systems. Depending on the hydrophobicity nature of the targeted imidazolium species and counteranions, different organic solvents were used to swap halides for assorted anions, proceeding in excellent to quantitative yields.
- 1 October 2009
- Published by Elsevier in Bioorganic & Medicinal Chemistry
- Vol. 17 (20) , 7387-7397
Indene-based frameworks targeting the 5-HT6 serotonin receptor: Ring constraint in indenylsulfonamides using cyclic amines and structurally abbreviated counterparts
- 1 October 2009
- Published by Elsevier in Bioorganic & Medicinal Chemistry
- Vol. 17 (20) , 7387-7397
Indene-based frameworks targeting the 5-HT6 serotonin receptor: Ring constraint in indenylsulfonamides using cyclic amines and structurally abbreviated counterparts
- 21 January 2009
- Published by American Chemical Society (ACS) in Journal of Medicinal Chemistry
- Vol. 52 (3) , 675-687
Indene-Based Scaffolds. 2. An Indole−Indene Switch: Discovery of Novel Indenylsulfonamides as 5-HT6Serotonin Receptor Agonists
Scaffold selection involving an indole-to-indene core change led to the discovery of a series of indenylsulfonamides that act as 5-HT6 serotonin receptor agonists. The variety of the targeted ligands and their synthetic complexity required multistep synthetic approaches. The novel indenylsulfonamides exhibited variable binding affinities for the 5-HT6 receptor, and the in vitro primary binding profiles of the preferred compounds revealed them to be 5-HT6 receptor agonists with Ki values ≥4.5 nM. The structural changes responsible for enhancing the affinities indicated a directing effect modulated by the nature of the indene core, the substitution at the aminoethyl side chain, and especially by the aryl(heteroaryl)sulfonyl group on the indene 5-position. A representative of the family, the N-(inden-5-yl)imidazothiazole-5-sulfonamide (43), exhibited a high affinity and functioned as a potent full agonist for the 5-HT6 receptor (Ki = 4.5 nM, EC50 = 0.9 nM, Emax = 98%).
- 21 January 2009
- Published by American Chemical Society (ACS) in Journal of Medicinal Chemistry
- Vol. 52 (3) , 675-687
Indene-Based Scaffolds. 2. An Indole−Indene Switch: Discovery of Novel Indenylsulfonamides as 5-HT6Serotonin Receptor Agonists
Scaffold selection involving an indole-to-indene core change led to the discovery of a series of indenylsulfonamides that act as 5-HT6 serotonin receptor agonists. The variety of the targeted ligands and their synthetic complexity required multistep synthetic approaches. The novel indenylsulfonamides exhibited variable binding affinities for the 5-HT6 receptor, and the in vitro primary binding profiles of the preferred compounds revealed them to be 5-HT6 receptor agonists with Ki values ≥4.5 nM. The structural changes responsible for enhancing the affinities indicated a directing effect modulated by the nature of the indene core, the substitution at the aminoethyl side chain, and especially by the aryl(heteroaryl)sulfonyl group on the indene 5-position. A representative of the family, the N-(inden-5-yl)imidazothiazole-5-sulfonamide (43), exhibited a high affinity and functioned as a potent full agonist for the 5-HT6 receptor (Ki = 4.5 nM, EC50 = 0.9 nM, Emax = 98%).
- 11 August 2008
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 6 (20) , 3795-3810
Indene-based scaffolds. Design and synthesis of novel serotonin 5-HT6 receptor ligands
A series of novel indene derivatives designed by a scaffold selection gave access to several examples of (Z)-arylmethylideneindenes and indenylsulfonamides that acted as serotonin 5-HT6receptor ligands. Different synthetic multistep routes could be applied to these target compounds, each with their own complexity and limitations. A reasonable route involved the (3-indenyl)acetic acids as the key intermediates, and two alternatives were also examined. The first protocol used was a two-step sequence employing a modified Horner–Wadsworth–Emmons reaction, but better results were obtained with a procedure based on the condensation of indanones with the lithium salt of ethyl acetate, followed immediately by dehydration with acid and hydrolysis/isomerization under basic catalysis. (3-Indenyl)acetic acids were transformed to the corresponding acetamides, which were effectively reduced to indenylsulfonamides 13–17 using an optimized procedure with AlH3–NMe2Et. The binding at the 5-HT6receptor was with moderate affinity (Ki = 216.5 nM) for the (Z)-benzylideneindenylsulfonamide 12 and enhanced affinity for the simple indenylsulfonamide counterpart 13 (Ki = 50.6 nM). Selected indenylsulfonamides 14–17 were then tested, showing Ki values as low as 20.2 nM.
- 11 August 2008
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 6 (20) , 3795-3810
Indene-based scaffolds. Design and synthesis of novel serotonin 5-HT6 receptor ligands
A series of novel indene derivatives designed by a scaffold selection gave access to several examples of (Z)-arylmethylideneindenes and indenylsulfonamides that acted as serotonin 5-HT6receptor ligands. Different synthetic multistep routes could be applied to these target compounds, each with their own complexity and limitations. A reasonable route involved the (3-indenyl)acetic acids as the key intermediates, and two alternatives were also examined. The first protocol used was a two-step sequence employing a modified Horner–Wadsworth–Emmons reaction, but better results were obtained with a procedure based on the condensation of indanones with the lithium salt of ethyl acetate, followed immediately by dehydration with acid and hydrolysis/isomerization under basic catalysis. (3-Indenyl)acetic acids were transformed to the corresponding acetamides, which were effectively reduced to indenylsulfonamides 13–17 using an optimized procedure with AlH3–NMe2Et. The binding at the 5-HT6receptor was with moderate affinity (Ki = 216.5 nM) for the (Z)-benzylideneindenylsulfonamide 12 and enhanced affinity for the simple indenylsulfonamide counterpart 13 (Ki = 50.6 nM). Selected indenylsulfonamides 14–17 were then tested, showing Ki values as low as 20.2 nM.
- Open Access
1,2-Diaryl(3-pyridyl)ethanone Oximes. Intermolecular Hydrogen Bonding Networks Revealed by X-ray Diffraction
The synthesis of a set of 1-aryl-2-aryl(3-pyridyl)ethanones 1-5 and thecorresponding ketoximes 6-9 is reported. Structural studies of oximes 6, 7 and 9 wereperformed in solution using 1H-NMR and in the solid state by X-ray crystallography,providing evidence of H-bonding networks. The crystal packing was controlled byhomomeric intermolecular oxime···oxime H-bond interactions for 6 and cooperativeoxime···N(pyridyl) and CH/π interactions for 7 and 9.
Open Access1,2-Diaryl(3-pyridyl)ethanone Oximes. Intermolecular Hydrogen Bonding Networks Revealed by X-ray Diffraction
The synthesis of a set of 1-aryl-2-aryl(3-pyridyl)ethanones 1-5 and thecorresponding ketoximes 6-9 is reported. Structural studies of oximes 6, 7 and 9 wereperformed in solution using 1H-NMR and in the solid state by X-ray crystallography,providing evidence of H-bonding networks. The crystal packing was controlled byhomomeric intermolecular oxime···oxime H-bond interactions for 6 and cooperativeoxime···N(pyridyl) and CH/π interactions for 7 and 9.