Byung Wook Jo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Byung Wook Jo has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Jeong Sun Sohn
Chosun Univ, Coll Gen Educ, Div Undeclared Majors, Gwangju 61452, South Korea
3 shared publications - Jung-Il Jin
Korea
2 shared publications - Hyeon Joon Lee
Ulsan University Hospital, Ulsan, Republic of Korea
1 shared publication Jae-Kon Choi
Department of Chemical Engineering , Chosun University , Kwangju City, 501-759, Korea
1 shared publicationJeong-Sun Sohn
1 shared publicationJongmin Lee
1 shared publication
Latest Publications
- Open Access
Application of Multi-Layered Temperature-Responsive Polymer Brushes Coating on Titanium Surface to Inhibit Biofilm Associated Infection in Orthopedic Surgery
Infection associated with biomedical implants remains the main cause of failure, leading to reoperation after orthopedic surgery. Orthopedic infections are characterized by microbial biofilm formation on the implant surface, which makes it challenging to diagnose and treat. One potential method to prevent and treat such complications is to deliver a sufficient dose of antibiotics at the onset of infection. This strategy can be realized by coating the implant with thermoregulatory polymers and triggering the release of antibiotics during the acute phase of infection. We developed a multi-layered temperature-responsive polymer brush (MLTRPB) coating that can release antibiotics once the temperature reaches a lower critical solution temperature (LCST). The coating system was developed using copolymers composed of diethylene glycol methyl ether methacrylate and 2-hydroxyethyl methacrylate by alternatively fabricating monomers layer by layer on the titanium surface. LCST was set to the temperature of 38–40 °C, a local temperature that can be reached during infection. The antibiotic elution characteristics were investigated, and the antimicrobial efficacy was tested against S. aureus species (Xen29 ATCC 29 213) using one to four layers of MLTRPB. Both in vitro and in vivo assessments demonstrated preventive effects when more than four layers of the coating were applied, ensuring promising antibacterial effects of the MLTRPB coating.
Open AccessApplication of Multi-Layered Temperature-Responsive Polymer Brushes Coating on Titanium Surface to Inhibit Biofilm Associated Infection in Orthopedic Surgery
Infection associated with biomedical implants remains the main cause of failure, leading to reoperation after orthopedic surgery. Orthopedic infections are characterized by microbial biofilm formation on the implant surface, which makes it challenging to diagnose and treat. One potential method to prevent and treat such complications is to deliver a sufficient dose of antibiotics at the onset of infection. This strategy can be realized by coating the implant with thermoregulatory polymers and triggering the release of antibiotics during the acute phase of infection. We developed a multi-layered temperature-responsive polymer brush (MLTRPB) coating that can release antibiotics once the temperature reaches a lower critical solution temperature (LCST). The coating system was developed using copolymers composed of diethylene glycol methyl ether methacrylate and 2-hydroxyethyl methacrylate by alternatively fabricating monomers layer by layer on the titanium surface. LCST was set to the temperature of 38–40 °C, a local temperature that can be reached during infection. The antibiotic elution characteristics were investigated, and the antimicrobial efficacy was tested against S. aureus species (Xen29 ATCC 29 213) using one to four layers of MLTRPB. Both in vitro and in vivo assessments demonstrated preventive effects when more than four layers of the coating were applied, ensuring promising antibacterial effects of the MLTRPB coating.
- Open Access
Biomimetic Adhesive Materials Containing Cyanoacryl Group for Medical Application
For underwater adhesives with biocompatible and more flexible bonds using biomimetic adhesive groups, DOPA-like adhesive molecules were modified with cyanoacrylates to obtain different repeating units and chain length copolymers. The goal of this work is to copy the mechanisms of underwater bonding to create synthetic water-borne underwater medical adhesives through blending of the modified DOPA and a triblock copolymer (PEO-PPO-PEO) for practical application to repair wet living tissues and bones, and in turn, to use the synthetic adhesives to test mechanistic hypotheses about the natural adhesive. The highest values in stress and modulus of the biomimetic adhesives prepared in wet state were 165 kPa and 33 MPa, respectively.
Open AccessBiomimetic Adhesive Materials Containing Cyanoacryl Group for Medical Application
For underwater adhesives with biocompatible and more flexible bonds using biomimetic adhesive groups, DOPA-like adhesive molecules were modified with cyanoacrylates to obtain different repeating units and chain length copolymers. The goal of this work is to copy the mechanisms of underwater bonding to create synthetic water-borne underwater medical adhesives through blending of the modified DOPA and a triblock copolymer (PEO-PPO-PEO) for practical application to repair wet living tissues and bones, and in turn, to use the synthetic adhesives to test mechanistic hypotheses about the natural adhesive. The highest values in stress and modulus of the biomimetic adhesives prepared in wet state were 165 kPa and 33 MPa, respectively.
- Open Access
DNA-Templated Preparation of Gold Nanoparticles
DNA-mediated gold nanoparticles were prepared by chemical reduction of DNA-Au(III) complex. The DNA-Au(III) was first formed by reacting DNA with HAuCl4 at a pH of 5.6. The complex in solution was reacted with hydrazine reducing Au(III) to Au. The reduced Au formed nanodimensional aggregates. The particle distributions were obtained by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). This method resulted in a rather uniform dispersion of Au nanoparticles of near-spherical shape and 45~80 nm in diameter. Gold nanoparticles were embedded and stabilized by DNA.
Open AccessDNA-Templated Preparation of Gold Nanoparticles
DNA-mediated gold nanoparticles were prepared by chemical reduction of DNA-Au(III) complex. The DNA-Au(III) was first formed by reacting DNA with HAuCl4 at a pH of 5.6. The complex in solution was reacted with hydrazine reducing Au(III) to Au. The reduced Au formed nanodimensional aggregates. The particle distributions were obtained by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). This method resulted in a rather uniform dispersion of Au nanoparticles of near-spherical shape and 45~80 nm in diameter. Gold nanoparticles were embedded and stabilized by DNA.
- 3 February 2010
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 1 (6) , 778-792
Polymer prodrug approaches applied to paclitaxel
Paclitaxel possesses a unique mechanism of drug action as a new class of microtubule stabilizing agent which finally leads to disrupted mitosis and cell death. Recent findings have shown that paclitaxel initiates apoptosis through multiple mechanisms. However, the strong hydrophobicity of paclitaxel drastically limits its use in natural form. In addition, significant toxicity which is mainly ascribed to the non-specific, indiscriminate distribution among the tissues limited the application of paclitaxel in cancer therapy. Therefore, it remains of interest to improve their use by enhancing solubility, selectivity and in vivo delivery by preparing functional prodrugs selectively activable in tumour areas. This article summarizes results and information derived recently from paclitaxel prodrugs based mainly on macromolecular conjugates and their interactions with body fluids. We also explore the potential application of site-specific carriers in the development of tumor-targeting paclitaxel conjugates.
- 3 February 2010
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 1 (6) , 778-792
Polymer prodrug approaches applied to paclitaxel
Paclitaxel possesses a unique mechanism of drug action as a new class of microtubule stabilizing agent which finally leads to disrupted mitosis and cell death. Recent findings have shown that paclitaxel initiates apoptosis through multiple mechanisms. However, the strong hydrophobicity of paclitaxel drastically limits its use in natural form. In addition, significant toxicity which is mainly ascribed to the non-specific, indiscriminate distribution among the tissues limited the application of paclitaxel in cancer therapy. Therefore, it remains of interest to improve their use by enhancing solubility, selectivity and in vivo delivery by preparing functional prodrugs selectively activable in tumour areas. This article summarizes results and information derived recently from paclitaxel prodrugs based mainly on macromolecular conjugates and their interactions with body fluids. We also explore the potential application of site-specific carriers in the development of tumor-targeting paclitaxel conjugates.
- 3 February 2009
- Published by Wiley in Polymer Composites
- Vol. 30 (12) , 1732-1742
Flame resistance and foaming properties of NBR compounds with halogen‐free flame retardants
Acrylonitrile butadiene rubber (NBR) foams compounded with various halogen‐free flame retardants were prepared. The influence of nonhalogen flame retardants on the flame resistance and foaming properties of the NBR compounds were investigated. The foaming properties (expandability 980%–1050%, closed‐cell structure) of NBR compounds with expandable graphite (EG) and ammonium polyphosphate (APP) flame retardants were similar to the NBR base compounds which contained primarily aluminum hydroxide (ATH). The heat release capacity (HRC) ranged from 10 to 74 J/g‐K, the average heat release rate (A‐HRR) ranged from 8 to 60 kW/m2, and the total heat release (THR) ranged from 2.6 to 7.3 MJ/m2 for the nonhalogenated NBR foams with closed‐cell structure and were significantly decreased upon increasing the amounts of flame retardants. This reduction is attributed to the hard char formation and production of water from the interaction with ATH. The limiting oxygen index (LOI) and time to ignition (TTI) show opposite results. The smoke density (0.050–0.037) of the NBR foams with EG flame retardant was decreased when compared to the NBR foam (0.107). The EG flame retardant was more effective than the phosphorus/nitrogen flame retardants in reducing the HRR and smoke density. The use of both ATH and EG is very effective in improving flame resistance. POLYM. COMPOS., 2009. © 2009 Society of Plastics Engineers
- 3 February 2009
- Published by Wiley in Polymer Composites
- Vol. 30 (12) , 1732-1742
Flame resistance and foaming properties of NBR compounds with halogen‐free flame retardants
Acrylonitrile butadiene rubber (NBR) foams compounded with various halogen‐free flame retardants were prepared. The influence of nonhalogen flame retardants on the flame resistance and foaming properties of the NBR compounds were investigated. The foaming properties (expandability 980%–1050%, closed‐cell structure) of NBR compounds with expandable graphite (EG) and ammonium polyphosphate (APP) flame retardants were similar to the NBR base compounds which contained primarily aluminum hydroxide (ATH). The heat release capacity (HRC) ranged from 10 to 74 J/g‐K, the average heat release rate (A‐HRR) ranged from 8 to 60 kW/m2, and the total heat release (THR) ranged from 2.6 to 7.3 MJ/m2 for the nonhalogenated NBR foams with closed‐cell structure and were significantly decreased upon increasing the amounts of flame retardants. This reduction is attributed to the hard char formation and production of water from the interaction with ATH. The limiting oxygen index (LOI) and time to ignition (TTI) show opposite results. The smoke density (0.050–0.037) of the NBR foams with EG flame retardant was decreased when compared to the NBR foam (0.107). The EG flame retardant was more effective than the phosphorus/nitrogen flame retardants in reducing the HRR and smoke density. The use of both ATH and EG is very effective in improving flame resistance. POLYM. COMPOS., 2009. © 2009 Society of Plastics Engineers
- 15 October 2008
- Published by Korean Physical Society in Journal of the Korean Physical Society
- Vol. 53 (4) , 1872-1878
Aggregation of Water-Soluble Paclitaxel Probed by Excimer Fluorescence of the Pyrenebutyric Acid Tag
- 15 October 2008
- Published by Korean Physical Society in Journal of the Korean Physical Society
- Vol. 53 (4) , 1872-1878
Aggregation of Water-Soluble Paclitaxel Probed by Excimer Fluorescence of the Pyrenebutyric Acid Tag
- 1 August 1990
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 29 (5-6) , 521-536
Synthesis and Properties of Thermotropic Poly(Ester-Amide)S Having Semiregular Monomer Sequences
Dichloride of 4,4′-(carbonylimino)dibenzoic acid was polymerized in 1,1,2,2-tetrachloroethane with a series of monosubstituted hydroquinone (series I) or α, ω-bis(4-hydroxyphenoxy)alkanes (series II) having alkane units of varying length. the polymers obtained were characterized by IR and NMR spectroscopy, solution viscosity measurements, and differential scanning calorimetry (DSC). Formation of mesophase and thermal behavior also were studied on a hot-stage attached to a polarizing microscope. All of the polymers were thermotropic and the transition temperatures were highly dependent on the nature of substituents on hydroquinone in the first series and on the length of alkylene spacers in the second series.
- 1 August 1990
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 29 (5-6) , 521-536
Synthesis and Properties of Thermotropic Poly(Ester-Amide)S Having Semiregular Monomer Sequences
Dichloride of 4,4′-(carbonylimino)dibenzoic acid was polymerized in 1,1,2,2-tetrachloroethane with a series of monosubstituted hydroquinone (series I) or α, ω-bis(4-hydroxyphenoxy)alkanes (series II) having alkane units of varying length. the polymers obtained were characterized by IR and NMR spectroscopy, solution viscosity measurements, and differential scanning calorimetry (DSC). Formation of mesophase and thermal behavior also were studied on a hot-stage attached to a polarizing microscope. All of the polymers were thermotropic and the transition temperatures were highly dependent on the nature of substituents on hydroquinone in the first series and on the length of alkylene spacers in the second series.