Giovanna Barbarella
Research Subjects
Giovanna Barbarella has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
Giuseppe Gigli
5 shared publications- Massimo Luigi Capobianco
CNR-Istituto per la Sintesi Organica e la Fotoreattività (ISOF), Via P. Gobetti 101, 40129 Bologna, Italy
4 shared publications - Francesca Di Maria
Institute for Organic Synthesis and Photoreactivity (ISOF), National Research Council of Italy (CNR),Via P. Gobetti 101, Bologna 40129, Italy
3 shared publications - Massimo Zambianchi
Consiglio Nazionale delle Ricerche, Istituto per la Sintesi Organica e la Fotoreattività, (CNR-ISOF), 40129 Bologna, Italy
3 shared publications - Nadia Camaioni
Istituto per la Sintesi Organica e la Fotoreattività, Consiglio Nazionale delle Ricerche, Via P. Gobetti 101, I-40129 Bologna, Italy
3 shared publications A. Bongini
Dip. Chimico G. Ciamician, Universita' di Bologna, Via Selmi 2, I‐40126, Bologna, Italy
2 shared publications
Latest Publications
- Open Access
Oligothiophenes as Fluorescent Markers for Biological Applications
This paper summarizes some of our results on the application of oligothiophenes as fluorescent markers for biological studies. The oligomers of thiophene, widely known for their semiconductor properties in organic electronics, are also fluorescent compounds characterized by chemical and optical stability, high absorbance and quantum yield. Their fluorescent emission can be easily modulated via organic synthesis by changing the number of thiophene rings and the nature of side-chains. This review shows how oligothiophenes can be derivatized with active groups such as phosphoramidite, N-hydroxysuccinimidyl and 4-sulfotetrafluorophenyl esters, isothiocyanate and azide by which the (bio)molecules of interest can be covalently bound. This paper also describes how molecules such as oligonucleotides, proteins and even nanoparticles, tagged with oligothiophenes, can be used in experiments ranging from hybridization studies to imaging of fixed and living cells. Finally, a few multilabeling experiments are described.
Open AccessOligothiophenes as Fluorescent Markers for Biological Applications
This paper summarizes some of our results on the application of oligothiophenes as fluorescent markers for biological studies. The oligomers of thiophene, widely known for their semiconductor properties in organic electronics, are also fluorescent compounds characterized by chemical and optical stability, high absorbance and quantum yield. Their fluorescent emission can be easily modulated via organic synthesis by changing the number of thiophene rings and the nature of side-chains. This review shows how oligothiophenes can be derivatized with active groups such as phosphoramidite, N-hydroxysuccinimidyl and 4-sulfotetrafluorophenyl esters, isothiocyanate and azide by which the (bio)molecules of interest can be covalently bound. This paper also describes how molecules such as oligonucleotides, proteins and even nanoparticles, tagged with oligothiophenes, can be used in experiments ranging from hybridization studies to imaging of fixed and living cells. Finally, a few multilabeling experiments are described.
- 19 October 2011
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 133 (44) , 17777-17785
Live-Cell-Permeant Thiophene Fluorophores and Cell-Mediated Formation of Fluorescent Fibrils
In our search for thiophene fluorophores that can overcome the limits of currently available organic dyes in live-cell staining, we synthesized biocompatible dithienothiophene-S,S-dioxide derivatives (DTTOs) that were spontaneously taken up by live mouse embryonic fibroblasts and HeLa cells. Upon treatment with DTTOs, the cells secreted nanostructured fluorescent fibrils, while cell viability remained unaltered. Comparison with the behavior of other cell-permeant, newly synthesized thiophene fluorophores showed that the formation of fluorescent fibrils was peculiar to DTTO dyes. Laser scanning confocal microscopy of the fluorescent fibrils showed that most of them were characterized by helical supramolecular organization. Electrophoretic analysis and theoretical calculations suggested that the DTTOs were selectively recognized by the HyPro component of procollagen polypeptide chains and incorporated through the formation of multiple H-bondings.
- 19 October 2011
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 133 (44) , 17777-17785
Live-Cell-Permeant Thiophene Fluorophores and Cell-Mediated Formation of Fluorescent Fibrils
In our search for thiophene fluorophores that can overcome the limits of currently available organic dyes in live-cell staining, we synthesized biocompatible dithienothiophene-S,S-dioxide derivatives (DTTOs) that were spontaneously taken up by live mouse embryonic fibroblasts and HeLa cells. Upon treatment with DTTOs, the cells secreted nanostructured fluorescent fibrils, while cell viability remained unaltered. Comparison with the behavior of other cell-permeant, newly synthesized thiophene fluorophores showed that the formation of fluorescent fibrils was peculiar to DTTO dyes. Laser scanning confocal microscopy of the fluorescent fibrils showed that most of them were characterized by helical supramolecular organization. Electrophoretic analysis and theoretical calculations suggested that the DTTOs were selectively recognized by the HyPro component of procollagen polypeptide chains and incorporated through the formation of multiple H-bondings.
- 11 May 2011
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 133 (22) , 8654-8661
A Successful Chemical Strategy To Induce Oligothiophene Self-Assembly into Fibers with Tunable Shape and Function
Functional supramolecular architectures for bottom-up organic nano- and microtechnology are a high priority research topic. We discovered a new recognition algorithm, resulting from the combination of thioalkyl substituents and head-to-head regiochemistry of substitution, to induce the spontaneous self-assembly of sulfur overrich octathiophenes into supramolecular crystalline fibers combining high charge mobility and intense fluorescence. The fibers were grown on various types of surfaces either as superhelices or straight rods depending on molecular structure. Helical fibers directly grown on a field effect transistor displayed efficient charge mobility and intrinsic ‘memory effect’. Despite the fact that the oligomers did not have chirality centers, one type of hand-helicity was always predominant in helical fibers, due to the interplay of molecular atropisomerism and supramolecular helicity induced by terminal substituents. Finally, we found that the new sulfur overrich oligothiophenes can easily be prepared in high yields through ultrasound and microwave assistance in green conditions.
- 11 May 2011
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 133 (22) , 8654-8661
A Successful Chemical Strategy To Induce Oligothiophene Self-Assembly into Fibers with Tunable Shape and Function
Functional supramolecular architectures for bottom-up organic nano- and microtechnology are a high priority research topic. We discovered a new recognition algorithm, resulting from the combination of thioalkyl substituents and head-to-head regiochemistry of substitution, to induce the spontaneous self-assembly of sulfur overrich octathiophenes into supramolecular crystalline fibers combining high charge mobility and intense fluorescence. The fibers were grown on various types of surfaces either as superhelices or straight rods depending on molecular structure. Helical fibers directly grown on a field effect transistor displayed efficient charge mobility and intrinsic ‘memory effect’. Despite the fact that the oligomers did not have chirality centers, one type of hand-helicity was always predominant in helical fibers, due to the interplay of molecular atropisomerism and supramolecular helicity induced by terminal substituents. Finally, we found that the new sulfur overrich oligothiophenes can easily be prepared in high yields through ultrasound and microwave assistance in green conditions.
- 20 July 2009
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 131 (31) , 10892-10900
Microwave-Assisted Synthesis of Thiophene Fluorophores, Labeling and Multilabeling of Monoclonal Antibodies, and Long Lasting Staining of Fixed Cells
We report the expedient microwave-assisted synthesis of thiophene based 4-sulfo-2,3,5,6,-tetrafluorophenyl esters whose molecular structure was engineered to achieve blue to red bright fluorescence. The reactivity toward monoclonal antibodies of the newly synthesized fluorophores was analyzed in comparison with that of the corresponding N-succinimidyl esters. Single-fluorophore and multiple-fluorophore labeled antibodies were easily prepared with both types of esters. Multiple-fluorophore labeling with blue and orange emitting fluorophores resulted in white fluorescent antibodies. Thiophene based fluorophores displayed unprecedented fluorescence stability in immunostaining experiments. First-principles TD-DFT theoretical calculations helped us to interpret the behavior of fluorescence emission in different environments.
- 20 July 2009
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 131 (31) , 10892-10900
Microwave-Assisted Synthesis of Thiophene Fluorophores, Labeling and Multilabeling of Monoclonal Antibodies, and Long Lasting Staining of Fixed Cells
We report the expedient microwave-assisted synthesis of thiophene based 4-sulfo-2,3,5,6,-tetrafluorophenyl esters whose molecular structure was engineered to achieve blue to red bright fluorescence. The reactivity toward monoclonal antibodies of the newly synthesized fluorophores was analyzed in comparison with that of the corresponding N-succinimidyl esters. Single-fluorophore and multiple-fluorophore labeled antibodies were easily prepared with both types of esters. Multiple-fluorophore labeling with blue and orange emitting fluorophores resulted in white fluorescent antibodies. Thiophene based fluorophores displayed unprecedented fluorescence stability in immunostaining experiments. First-principles TD-DFT theoretical calculations helped us to interpret the behavior of fluorescence emission in different environments.
- 2 February 2009
- Published by Wiley in Chemistry – A European Journal
- Vol. 15 (8) , 1876-1885
Self-Organization, Optical, and Electrical Properties of α-Quinquethiophene-Dinucleotide Conjugates
- 2 February 2009
- Published by Wiley in Chemistry – A European Journal
- Vol. 15 (8) , 1876-1885
Self-Organization, Optical, and Electrical Properties of α-Quinquethiophene-Dinucleotide Conjugates
- 19 December 2007
- Published by Wiley in Chemistry – A European Journal
- Vol. 14 (2) , 513-521
Water‐Soluble, Electroactive, and Photoluminescent Quaterthiophene–Dinucleotide Conjugates
Quaterthiophene–dinucleotide conjugates 5′TA3′‐t4‐3′AT5′, 5′AA3′‐t4‐3′AA5′, and 5′TT3′‐t4‐3′TT5′ (TA: thymidine–adenosine, AA: adenosine–adenosine, TT: thymidine–thymidine) were synthesized and analyzed by a combination of spectroscopy and microscopy, electrical characterization, and theoretical calculations. Circular dichroism (CD) experiments demonstrated a transfer of chirality from the dinucleotides to quaterthiophene at high ionic strength and in cast films. The films were photoluminescent and electroactive. CD and photoluminescence spectra and current density/voltage plots (measured under dynamic vacuum) displayed significant variation on changing the dinucleotide scaffold. Molecular mechanics and molecular dynamics calculations indicated that the conformation and packing modes of the conjugates are the result of a balance between intra‐ and intermolecular nucleobase–thiophene stacking interactions and intramolecular hydrogen bonding between the nucleobases.
- 19 December 2007
- Published by Wiley in Chemistry – A European Journal
- Vol. 14 (2) , 513-521
Water‐Soluble, Electroactive, and Photoluminescent Quaterthiophene–Dinucleotide Conjugates
Quaterthiophene–dinucleotide conjugates 5′TA3′‐t4‐3′AT5′, 5′AA3′‐t4‐3′AA5′, and 5′TT3′‐t4‐3′TT5′ (TA: thymidine–adenosine, AA: adenosine–adenosine, TT: thymidine–thymidine) were synthesized and analyzed by a combination of spectroscopy and microscopy, electrical characterization, and theoretical calculations. Circular dichroism (CD) experiments demonstrated a transfer of chirality from the dinucleotides to quaterthiophene at high ionic strength and in cast films. The films were photoluminescent and electroactive. CD and photoluminescence spectra and current density/voltage plots (measured under dynamic vacuum) displayed significant variation on changing the dinucleotide scaffold. Molecular mechanics and molecular dynamics calculations indicated that the conformation and packing modes of the conjugates are the result of a balance between intra‐ and intermolecular nucleobase–thiophene stacking interactions and intramolecular hydrogen bonding between the nucleobases.
- Open Access
- 7 December 2007
- Published by Wiley in Chemistry – A European Journal
- Vol. 13 (36) , 10007
Cover Picture: Liquid-Crystalline Rigid-Core Semiconductor Oligothiophenes: Influence of Molecular Structure on Phase Behaviour and Thin-Film Properties (Chem. Eur. J. 36/2007)
- 7 December 2007
- Published by Wiley in Chemistry – A European Journal
- Vol. 13 (36) , 10007
Open AccessCover Picture: Liquid-Crystalline Rigid-Core Semiconductor Oligothiophenes: Influence of Molecular Structure on Phase Behaviour and Thin-Film Properties (Chem. Eur. J. 36/2007)
- 27 December 2005
- Published by American Chemical Society (ACS) in Bioconjugate Chemistry
- Vol. 17 (1) , 58-67
Bright OligothiopheneN-Succinimidyl Esters for Efficient Fluorescent Labeling of Proteins and Oligonucleotides
The synthesis of multicolor fluorescent oligothiophene N-succinimidyl esters (TSEs) is reported, and their optical properties are discussed with the aid of ab initio calculations. The esters were coupled to proteins and to 3‘-amino-modified oligonucleotides in mild conditions and with similar modalities. A comparative study of the bioconjugate of IgG1 anti-CD3 antibody labeled with a blue fluorescent TSE and with fluorescein isothiocyanate (FITC) is reported, showing that the former achieves higher photoluminescence intensity and optical stability than the latter. Fluorescence resonance energy transfer experiments with TSE-labeled oligonucleotides and examples of cellular imaging via TSE-labeled proteins are reported.
- 27 December 2005
- Published by American Chemical Society (ACS) in Bioconjugate Chemistry
- Vol. 17 (1) , 58-67
Bright OligothiopheneN-Succinimidyl Esters for Efficient Fluorescent Labeling of Proteins and Oligonucleotides
The synthesis of multicolor fluorescent oligothiophene N-succinimidyl esters (TSEs) is reported, and their optical properties are discussed with the aid of ab initio calculations. The esters were coupled to proteins and to 3‘-amino-modified oligonucleotides in mild conditions and with similar modalities. A comparative study of the bioconjugate of IgG1 anti-CD3 antibody labeled with a blue fluorescent TSE and with fluorescein isothiocyanate (FITC) is reported, showing that the former achieves higher photoluminescence intensity and optical stability than the latter. Fluorescence resonance energy transfer experiments with TSE-labeled oligonucleotides and examples of cellular imaging via TSE-labeled proteins are reported.
- Top Cited Papers
- 1 July 2005
- Published by Wiley in Advanced Materials
- Vol. 17 (13) , 1581-1593
The Versatile Thiophene: An Overview of Recent Research on Thiophene‐Based Materials
In the last few years, thiophene‐based materials, which are semiconductor and fluorescent compounds, have become a highly interdisciplinary field of research, with diverse studies ranging from the fabrication of electronic and optoelectronic devices to the selective detection of biopolymers. This article presents a survey of the papers published in the last two years and concludes with the authors' views on future developments.
- 1 July 2005
- Published by Wiley in Advanced Materials
- Vol. 17 (13) , 1581-1593
Top Cited PapersThe Versatile Thiophene: An Overview of Recent Research on Thiophene‐Based Materials
In the last few years, thiophene‐based materials, which are semiconductor and fluorescent compounds, have become a highly interdisciplinary field of research, with diverse studies ranging from the fabrication of electronic and optoelectronic devices to the selective detection of biopolymers. This article presents a survey of the papers published in the last two years and concludes with the authors' views on future developments.
- 23 March 2005
- Published by Wiley in Advanced Functional Materials
- Vol. 15 (4) , 664-670
V‐Shaped Thiophene‐Based Oligomers with Improved Electroluminescence Properties
The synthesis via the Stille coupling of a new family of oligomers derived from benzo[b]thiophene is reported. Owing to their branched molecular structure lacking any symmetry element, these compounds display a low tendency to crystallization and better film‐forming properties than their linear counterparts. Spin‐coated films show photoluminescence efficiencies up to 50 %. Light‐emitting diodes with spin‐coated films as the active layers display markedly improved performance with respect to similar devices based on linear oligothiophenes, with luminance values up to more than 10 000 cd m–2. Semiempirical PM3 and ZINDO/S calculations provide insight into the molecular geometries and electron distribution of the frontier orbitals of the new compounds. Cyclic voltammetry data indicates that the transformation of the thienyl sulfur of benzo[b]thiophene to the corresponding thienyl‐S,S‐dioxide leads an increase in electron affinity by 0.5–0.7 V, analogous to that of the corresponding linear oligomers.
- 23 March 2005
- Published by Wiley in Advanced Functional Materials
- Vol. 15 (4) , 664-670
V‐Shaped Thiophene‐Based Oligomers with Improved Electroluminescence Properties
The synthesis via the Stille coupling of a new family of oligomers derived from benzo[b]thiophene is reported. Owing to their branched molecular structure lacking any symmetry element, these compounds display a low tendency to crystallization and better film‐forming properties than their linear counterparts. Spin‐coated films show photoluminescence efficiencies up to 50 %. Light‐emitting diodes with spin‐coated films as the active layers display markedly improved performance with respect to similar devices based on linear oligothiophenes, with luminance values up to more than 10 000 cd m–2. Semiempirical PM3 and ZINDO/S calculations provide insight into the molecular geometries and electron distribution of the frontier orbitals of the new compounds. Cyclic voltammetry data indicates that the transformation of the thienyl sulfur of benzo[b]thiophene to the corresponding thienyl‐S,S‐dioxide leads an increase in electron affinity by 0.5–0.7 V, analogous to that of the corresponding linear oligomers.