MBMichael A. Brunke

Michael A. Brunke

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Michael A. Brunke has a total of 47 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Does Marine Surface Tension Have Global Biogeography? Addition for the OCEANFILMS Package

    by Scott Elliott, Susannah Burrows, Philip Cameron-Smith, Forrest Hoffman, Elizabeth Hunke, Nicole Jeffery, Yina Liu, Mathew Maltrud, Zachary Menzo, Oluwaseun Ogunro, et al.

    We apply principles of Gibbs phase plane chemistry across the entire ocean-atmosphere interface to investigate aerosol generation and geophysical transfer issues. Marine surface tension differences comprise a tangential pressure field controlling trace gas fluxes, primary organic inputs, and sea spray salt injections, in addition to heat and momentum fluxes. Mapping follows from the organic microlayer composition, now represented in ocean system models. Organic functional variations drive the microforcing, leading to (1) reduced turbulence and (by extension) laminar gas-energy diffusion; plus (2) altered bubble film mass emission into the boundary layer. Interfacial chemical behaviors are, therefore, closely reviewed as the background. We focus on phase transitions among two dimensional “solid, liquid, and gaseous” states serving as elasticity indicators. From the pool of dissolved organic carbon (DOC) only proteins and lipids appear to occupy significant atmospheric interfacial areas. The literature suggests albumin and stearic acid as the best proxies, and we distribute them through ecodynamic simulation. Consensus bulk distributions are obtained to control their adsorptive equilibria. We devise parameterizations for both the planar free energy and equation of state, relating excess coverage to the surface pressure and its modulus. Constant settings for the molecular surrogates are drawn from laboratory study and successfully reproduce surfactant solid-to-gas occurrence in compression experiments. Since DOC functionality measurements are rare, we group them into super-ecological province tables to verify aqueous concentration estimates. Outputs are then fed into a coverage, tension, elasticity code. The resulting two dimensional pressure contours cross a critical range for the regulation of precursor piston velocity, bubble breakage, and primary aerosol sources plus ripple damping. Concepts extend the water-air adsorption theory currently embodied in our OCEANFILMS aerosol emissions package, and the two approaches could be inserted into Earth System Models together. Uncertainties in the logic include kinetic and thermochemical factors operating at multiple scales.


  • Open Access

    Does Marine Surface Tension Have Global Biogeography? Addition for the OCEANFILMS Package

    by Scott Elliott, Susannah Burrows, Philip Cameron-Smith, Forrest Hoffman, Elizabeth Hunke, Nicole Jeffery, Yina Liu, Mathew Maltrud, Oluwaseun Ogunro, Luke Van Roekel, et al.

    We apply principles of Gibbs phase plane chemistry to and across the entire ocean-atmospheric interface. Surface tension increments support a two dimensional, tangential pressure well known to determine rates of bulk gas, bubble, salt, spray and momentum transfer plus both sensible and latent heat fluxes. Hence it is worth asking whether tension mapping follows from current understanding of two dimensional composition. A history is provided dating back centuries and demonstrating that detrital organic macromolecules are central; subtle surfactant functional variation creates a microforcing field which dissipates turbulent energy at the sub-meter scale. Since we have just distributed major biopolymeric classes emitted as primary organic aerosol, further climate links can be established by considering full planar thermochemistry. Organic microlayer behaviors are reviewed with attention to confined, analog phase transitions among two dimensional “solid, liquid, (and) gaseous” states serving as elasticity indicators. We also discuss surfactant properties of general marine dissolved organic carbon, demonstrating that only proteins and lipids are capable of occupying significant local micro-area. The literature often suggests albumin and stearic acid as best proxies, and so we distribute their concentrations through multilevel global ecodynamic simulations. Consensus distributions are obtained in order to control adsorptive equilibria. Working from conservation of planar free energy, a parametric equation of state is devised relating excess coverage to the surface pressure-modulus. Constant settings for the proxy pair are drawn from laboratory study, and they successfully reproduce frequencies for surfactant solid-to-gas occurrence in ambient compression experiments. Functionally resolved organic measurements are rare and so we group them into super-ecological province tables showing that our bulk concentration estimates are reasonable. Outputs are then fed into a coverage-tension-elasticity code. Resulting contours traverse the critical range for piston velocity, bubble-spray and damping effects on either a regional or seasonal basis. There is also a possibility for widespread microlayer crystallization in polar seas. The concepts are a direct extension of our organic aerosol work, and the two approaches could be inserted into Earth System Models in tandem. Uncertainties in the logic are enumerated and include kinetic and thermochemical factors at multiple scales. But the problems are reducible through molecular modeling coupled to renewed laboratory and field study. Connections to marine colloids-gels, microlayer iron chelation, and linings of the ice channel network are discussed additionally.


  • Open Access

    Implementing and Evaluating Variable Soil Thickness in the Community Land Model, Version 4.5 (CLM4.5)

    by Michael A. Brunke, Patrick Broxton, Jon Pelletier, David Gochis, Pieter Hazenberg, David M. Lawrence, L. Ruby Leung, Guo-Yue Niu, Peter A. Troch, Xubin Zeng

    One of the recognized weaknesses of land surface models as used in weather and climate models is the assumption of constant soil thickness because of the lack of global estimates of bedrock depth. Using a 30-arc-s global dataset for the thickness of relatively porous, unconsolidated sediments over bedrock, spatial variation in soil thickness is included here in version 4.5 of the Community Land Model (CLM4.5). The number of soil layers for each grid cell is determined from the average soil depth for each 0.9° latitude × 1.25° longitude grid cell. The greatest changes in the simulation with variable soil thickness are to baseflow, with the annual minimum generally occurring earlier. Smaller changes are seen in latent heat flux and surface runoff primarily as a result of an increase in the annual cycle amplitude. These changes are related to soil moisture changes that are most substantial in locations with shallow bedrock. Total water storage (TWS) anomalies are not strongly affected over most river basins since most basins contain mostly deep soils, but TWS anomalies are substantially different for a river basin with more mountainous terrain. Additionally, the annual cycle in soil temperature is partially affected by including realistic soil thicknesses resulting from changes in the vertical profile of heat capacity and thermal conductivity. However, the largest changes to soil temperature are introduced by the soil moisture changes in the variable soil thickness simulation. This implementation of variable soil thickness represents a step forward in land surface model development.


  • Open Access

    Intercomparison of Seven NDVI Products over the United States and Mexico

    by William Scheftic, Xubin Zeng, Patrick Broxton, Michael Brunke

    Satellites have provided large-scale monitoring of vegetation for over three decades, and several satellite-based Normalized Difference Vegetation Index (NDVI) datasets have been produced. Here we intercompare four long-term NDVI datasets based largely on the AVHRR sensor (NDVIg, NDVI3g, STAR, VIP) and three datasets based on newer sensors (SPOT, Terra, Aqua) and evaluate the effectiveness of homogenizing the datasets using the green vegetation fraction (GVF) and the impact it has on phenology trends. Results show that all NDVI datasets are highly correlated with each other. However, there are significant differences in the regression slopes that vary spatially and temporally. There is a general trend towards higher maximum annual NDVI over much of the temperate forests of the US and a longer greening period due mostly to a delayed end of the season. These trends are less well-defined over rainfall dependent ecosystems in Mexico and the southwest US Compared with the NDVI datasets, the derived GVF datasets show more one-to-one relationships, have reduced interannual variation, preserve their relationships better over the entire time period and are characterized by weaker trends. Finally, weak agreement between the trends in the datasets stresses the importance of using multiple datasets to evaluate changes in vegetation and its phenology.


  • Open Access

    An Assessment of the Uncertainties in Ocean Surface Turbulent Fluxes in 11 Reanalysis, Satellite-Derived, and Combined Global Datasets

    by Michael A. Brunke, Zhuo Wang, Xubin Zeng, Michael Bosilovich, Chung-Lin Shie

    Ocean surface turbulent fluxes play an important role in the energy and water cycles of the atmosphere–ocean coupled system, and several flux products have become available in recent years. Here, turbulent fluxes from 6 widely used reanalyses, 4 satellite-derived flux products, and 2 combined product are evaluated by comparison with direct covariance latent heat (LH) and sensible heat (SH) fluxes and inertial-dissipation wind stresses measured from 12 cruises over the tropics and mid- and high latitudes. The biases range from −3.0 to 20.2 W m−2 for LH flux, from −1.4 to 6.0 W m−2 for SH flux, and from −7.6 to 7.9 × 10−3 N m−2 for wind stress. These biases are small for moderate wind speeds but diverge for strong wind speeds (>10 m s−1). The total flux biases are then further evaluated by dividing them into uncertainties due to errors in the bulk variables and the residual uncertainty. The bulk-variable-caused uncertainty dominates many products’ SH flux and wind stress biases. The biases in the bulk variables that contribute to this uncertainty can be quite high depending on the cruise and the variable. On the basis of a ranking of each product’s flux, it is found that the Modern-Era Retrospective Analysis for Research and Applications (MERRA) is among the “best performing” for all three fluxes. Also, the European Centre for Medium-Range Weather Forecasts (ECMWF) interim reanalysis (ERA-Interim) and the National Centers for Environmental Prediction–Department of Energy (NCEP–DOE) reanalysis are among the best performing for two of the three fluxes. Of the satellite-derived products, version 2b of the Goddard Satellite-Based Surface Turbulent Fluxes (GSSTF2b) is among the best performing for two of the three fluxes. Also among the best performing for only one of the fluxes are the 40-yr ERA (ERA-40) and the combined product objectively analyzed air–sea fluxes (OAFlux). Direction for the future development of ocean surface flux datasets is also suggested.


  • Open Access

    Satellite Global and Hemispheric Lower Tropospheric Temperature Annual Temperature Cycle

    by Benjamin M. Herman, Michael A. Brunke, Roger A. Pielke, John R. Christy, Richard T. McNider

    Previous analyses of the Earth’s annual cycle and its trends have utilized surface temperature data sets. Here we introduce a new analysis of the global and hemispheric annual cycle using a satellite remote sensing derived data set during the period 1979–2009, as determined from the lower tropospheric (LT) channel of the MSU satellite. While the surface annual cycle is tied directly to the heating and cooling of the land areas, the tropospheric annual cycle involves additionally the gain or loss of heat between the surface and atmosphere. The peak in the global tropospheric temperature in the 30 year period occurs on 10 July and the minimum on 9 February in response to the larger land mass in the Northern Hemisphere. The actual dates of the hemispheric maxima and minima are a complex function of many variables which can change from year to year thereby altering these dates.Here we examine the time of occurrence of the global and hemispheric maxima and minima lower tropospheric temperatures, the values of the annual maxima and minima, and the slopes and significance of the changes in these metrics. The statistically significant trends are all relatively small. The values of the global annual maximum and minimum showed a small, but significant trend. Northern and Southern Hemisphere maxima and minima show a slight trend toward occurring later in the year. Most recent analyses of trends in the global annual cycle using observed surface data have indicated a trend toward earlier maxima and minima.


  • Open Access

    A comparison of ship and satellite measurements of cloud properties with global climate model simulations in the southeast Pacific stratus deck

    by M. A. Brunke, S. P. de Szoeke, P. Zuidema, X. Zeng

    Here, liquid water path (LWP), cloud fraction, cloud top height, and cloud base height retrieved by a suite of A-train satellite instruments (the CPR aboard CloudSat, CALIOP aboard CALIPSO, and MODIS aboard Aqua) are compared to ship observations from research cruises made in 2001 and 2003–2007 into the stratus/stratocumulus deck over the southeast Pacific Ocean. It is found that CloudSat radar-only LWP is generally too high over this region and the CloudSat/CALIPSO cloud bases are too low. This results in a relationship (LWP~h9) between CloudSat LWP and CALIPSO cloud thickness (h) that is very different from the adiabatic relationship (LWP~h2) from in situ observations. Such biases can be reduced if LWPs suspected to be contaminated by precipitation are eliminated, as determined by the maximum radar reflectivity Zmax>−15 dBZ in the apparent lower half of the cloud, and if cloud bases are determined based upon the adiabatically-determined cloud thickness (h~LWP1/2). Furthermore, comparing results from a global model (CAM3.1) to ship observations reveals that, while the simulated LWP is quite reasonable, the model cloud is too thick and too low, allowing the model to have LWPs that are almost independent of h. This model can also obtain a reasonable diurnal cycle in LWP and cloud fraction at a location roughly in the centre of this region (20° S, 85° W) but has an opposite diurnal cycle to those observed aboard ship at a location closer to the coast (20° S, 75° W). The diurnal cycle at the latter location is slightly improved in the newest version of the model (CAM4). However, the simulated clouds remain too thick and too low, as cloud bases are usually at or near the surface.


  • An intercomparison of bulk aerodynamic algorithms used over sea ice with data from the Surface Heat Budget for the Arctic Ocean (SHEBA) experiment

    by Michael A. Brunke, Mingyu Zhou, Xubin Zeng, Edgar L Andreas

    The presence of sea ice fundamentally changes the energy and momentum exchange between the ocean and the atmosphere in the Arctic. Thus an accurate representation of the surface turbulent fluxes in climate models is a necessity. An intercomparison of bulk aerodynamic algorithms that calculate surface turbulent fluxes in four climate and numerical weather prediction models is undertaken using data from the Surface Heat Budget of the Arctic Ocean (SHEBA) field experiment, which occurred on the ice in the Beaufort and Chukchi seas north of Alaska from October 1997 to October 1998. Algorithm deficiencies include the consistently higher wind stresses produced by the Arctic Regional Climate System Model (ARCSYM) algorithm; the lower sensible heat fluxes under stable conditions by the algorithms in ARCSYM, the National Center for Environmental Prediction's Global Forecasting System model, and the European Centre for Medium‐Range Weather Forecasts (ECMWF) model; and the lower wind stresses by the National Center for Atmospheric Research's Community Climate System Model (CCSM) algorithm under stable conditions. Unlike the constants used in most of the four model algorithms, the roughness lengths for momentum can be fitted by an exponential function with parameters that account for the seasonality in the roughness length. The roughness lengths for heat, zot, can be considered a constant (e.g., that used in CCSM, 0.5 mm), similar to what was found by Andreas et al. (2004). When these roughness lengths were implemented into the CCSM and ECMWF algorithms, they produced slightly better wind stresses and sensible heat fluxes most of the time.


  • Which Bulk Aerodynamic Algorithms are Least Problematic in Computing Ocean Surface Turbulent Fluxes?

    by Michael A. Brunke, Chris W. Fairall, Xubin Zeng, Laurence Eymard, Judith A. Curry

    Bulk aerodynamic algorithms are needed to compute ocean surface turbulent fluxes in weather forecasting and climate models and in the development of global surface flux datasets. Twelve such algorithms are evaluated and ranked using direct turbulent flux measurements determined from covariance and inertial-dissipation methods from 12 ship cruises over the tropical and midlatitude oceans (from about 5°S to 60°N). The four least problematic of these 12 algorithms based upon the overall ranking for this data include the Coupled Ocean–Atmosphere Response Experiment (COARE) version 3.0 and The University of Arizona (UA) schemes as well as those used at the European Centre for Medium-Range Weather Forecasts (ECMWF) and the National Aeronautics and Space Administration (NASA) Data Assimilation Office for version 1 of the Goddard Earth Observing System reanalysis (GEOS-1). Furthermore, the four most problematic of these algorithms are also identified along with possible explanations. The overall ranking is not substantially affected by the use of the average of covariance and inertial-dissipation flux measurements or by taking into consideration measurement uncertainties. The differences between computed and observed fluxes are further evaluated as a function of near-surface wind speed and sea surface temperature to understand the rankings. Finally, several unresolved issues in terms of measurement and algorithm uncertainties are raised.


  • Which Bulk Aerodynamic Algorithms are Least Problematic in Computing Ocean Surface Turbulent Fluxes?

    by Michael A. Brunke, Chris W. Fairall, Xubin Zeng, Laurence Eymard, Judith A. Curry

    Bulk aerodynamic algorithms are needed to compute ocean surface turbulent fluxes in weather forecasting and climate models and in the development of global surface flux datasets. Twelve such algorithms are evaluated and ranked using direct turbulent flux measurements determined from covariance and inertial-dissipation methods from 12 ship cruises over the tropical and midlatitude oceans (from about 5°S to 60°N). The four least problematic of these 12 algorithms based upon the overall ranking for this data include the Coupled Ocean–Atmosphere Response Experiment (COARE) version 3.0 and The University of Arizona (UA) schemes as well as those used at the European Centre for Medium-Range Weather Forecasts (ECMWF) and the National Aeronautics and Space Administration (NASA) Data Assimilation Office for version 1 of the Goddard Earth Observing System reanalysis (GEOS-1). Furthermore, the four most problematic of these algorithms are also identified along with possible explanations. The overall ranking ... Abstract Bulk aerodynamic algorithms are needed to compute ocean surface turbulent fluxes in weather forecasting and climate models and in the development of global surface flux datasets. Twelve such algorithms are evaluated and ranked using direct turbulent flux measurements determined from covariance and inertial-dissipation methods from 12 ship cruises over the tropical and midlatitude oceans (from about 5°S to 60°N). The four least problematic of these 12 algorithms based upon the overall ranking for this data include the Coupled Ocean–Atmosphere Response Experiment (COARE) version 3.0 and The University of Arizona (UA) schemes as well as those used at the European Centre for Medium-Range Weather Forecasts (ECMWF) and the National Aeronautics and Space Administration (NASA) Data Assimilation Office for version 1 of the Goddard Earth Observing System reanalysis (GEOS-1). Furthermore, the four most problematic of these algorithms are also identified along with possible explanations. The overall ranking ...