MGMaiko Girschikofsky

Maiko Girschikofsky

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Maiko Girschikofsky has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optical Sensor for Real-Time Detection of Trichlorofluoromethane

    by Maiko Girschikofsky, Dimitrij Ryvlin, Siegfried R. Waldvogel, Ralf Hellmann

    Trichlorofluoromethane was once a promising and versatile applicable chlorofluorocarbon. Unaware of its ozone-depleting character, for a long time it was globally applied as propellant and refrigerant and thus led to significant thinning of the ozone layer and contributed to the formation of the so-called ozone hole. Although production and application of this substance were gradually reduced at an early stage, we still face the consequences of its former careless use. Today, trichlorofluoromethane is released during recycling processes of waste cooling devices, traded on the black market, and according to recent findings still illegally manufactured. Here, we present an optical sensor device for real-time in-situ detection and measurement of this environmentally harmful chlorofluorocarbon. The described sensor is based on a planar Bragg grating that is functionalized with cyclodextrin derivatives and operates on the principle of a chemical sensor. In our study, the sensor is sensitized using per-methyl-, per-ethyl-, and per-allyl-substituted α -, β -, and γ -cyclodextrins as affinity materials for airborne trichlorofluoromethane. These functional coatings have been proven to be highly efficient, as an up to 400-times stronger signal deflection could be achieved compared to an identical but uncoated sensor. The presented sensor device shows instantaneous response to trichlorofluoromethane exposure, and features a limit-of-detection of less than 25 ppm, depending on the applied affinity material.


  • One-step nanoimprinted Bragg grating sensor based on hybrid polymers

    by M. Förthner, M. Girschikofsky, M. Rumler, F. Stumpf, M. Rommel, R. Hellmann, L. Frey


  • Open Access

    Methyl‐Substituted α‐Cyclodextrin as Affinity Material for Storage, Separation, and Detection of Trichlorofluoromethane

    by Dimitrij Ryvlin, Maiko Girschikofsky, Dieter Schollmeyer, Ralf Hellmann, Siegfried R. Waldvogel

    The severely ozone‐depleting trichlorofluoromethane is still appearing in several recycling processes or industrial applications. A simple and selective supramolecular complex formation of per‐methylated α‐cyclodextrin (1) with the highly volatile trichlorofluoromethane (2) is reported. This interaction moreover leads to thermally stable crystals. Per‐methylated α‐cyclodextrin is successfully exploited as a reversible and selective adsorption material for liquid and airborne trichlorofluoromethane as well as an affinity material for the chemical sensing and detection of this particular volatile organic component.


  • High-temperature stable and sterilizable waveguide Bragg grating in planar cyclo-olefin copolymer

    by Manuel Rosenberger, Stefan Kefer, Maiko Girschikofsky, Gian-Luca Roth, Steffen Hessler, Stefan Belle, Bernhard Schmauss, Ralf Hellmann

    In this Letter, we demonstrate a high-temperature stable polymer planar waveguide Bragg grating based on cyclo-olefin copolymers. The high glass transition temperature of the polymer material amounting to 178°C, in conjunction with a high-temperature stable UV-curable adhesive used to connect the polymer sensor to a standard single-mode fiber, enables temperature readings of up to 160°C while exhibiting a temperature sensitivity of −7.3  pm/°C. The reflected power of the Bragg wavelength remains constant up to a temperature of 130°C before declining at higher temperatures with an overall reduction of 2.5 dB at 160°C. However, decreasing temperature results in a complete recovery of the peak power, facilitating steam pressure sterilization (129°C, 0.17 MPa) of the polymer planar waveguide Bragg grating.


  • TiO 2 surface functionalization of COC based planar waveguide Bragg gratings for refractive index sensing

    by M Rosenberger, M Girschikofsky, M Förthner, S Belle, M Rommel, L Frey, B Schmauss, R Hellmann

    We demonstrate the applicability of a planar waveguide Bragg grating in cyclo-olefin copolymer (COC) for refractive index sensing. The polymer planar waveguide Bragg grating fabricated using a single writing step technique is coated with a high-index layer of titanium dioxide (TiO 2 ) leading to a distinct birefringence. This in turn results in the splitting of the Bragg reflection into two distinct Bragg wavelengths, which strongly differ regarding their refractive index sensitivities. Where one wavelength is only slightly affected by the ambient refractive index, the second Bragg peak shows a strong sensitivity. Furthermore, we investigate the temperature behaviour of the functionalized sensor and discuss it with respect to applications in refractive index sensing.


  • Open Access

    Waveguide Bragg Gratings in Ormocer®s for Temperature Sensing

    by Maiko Girschikofsky, Manuel Rosenberger, Michael Förthner, Mathias Rommel, Lothar Frey, Ralf Hellmann

    Embedded channel waveguide Bragg gratings are fabricated in the Ormocer® hybrid polymers OrmoComp®, OrmoCore, and OrmoClad by employing a single writing step technique based on phase mask technology and KrF excimer laser irradiation. All waveguide Bragg gratings exhibit well-defined reflection peaks within the telecom wavelengths range with peak heights of up to 35 dB and −3 dB-bandwidths of down to 95 pm. Furthermore, the dependency of the fabricated embedded channel waveguide Bragg gratings on changes of the temperature and relative humidity are investigated. Here, we found that the Bragg grating in OrmoComp® is significantly influenced by humidity variations, while the Bragg gratings in OrmoCore and OrmoClad exhibit linear and considerably high temperature sensitivities of up to −250 pm/ ∘ C and a linear dependency on the relative humidity in the range of −9 pm/%.


  • Open Access

    Fabrication of Bragg grating sensors in UV-NIL structured Ormocer waveguides

    by Maiko Girschikofsky, Michael Förthner, Mathias Rommel, Lothar Frey, Ralf Hellmann

    We report on the fabrication and characterization of Bragg gratings in UV-NIL structured Ormocer hybrid polymer rib-type waveguides using phase mask technology. The influence of fabrication parameters such as the applied laser fluence during the inscription process and the grating's length on the spectral behavior of the waveguide Bragg gratings was experimentally determined and compared to numerical simulations and calculations. To investigate potential sensor applications, the sensitivity of the thus fabricated optical devices towards refractive index changes of the gratings' surrounding (qualification for bio- and chemical sensing) as well as the sensitivity towards temperature and relative humidity were determined

  • Fabrication of Bragg gratings in planar PMMA: impact of UV dosage and thermal annealing

    by M. Rosenberger, M. Girschikofsky, B. Schmauss, R. Hellmann

    We report on the fabrication of planar Bragg gratings in polymer substrates and study the impact of the UV dosage and a subsequent thermal annealing on the reflectivity of the gratings and the full width at half maximum bandwidth of the reflected spectra. In addition, the influence of the grating length is investigated, showing that gratings as short as 4 mm continuously exhibit good reflection properties, facilitating miniaturized sensor designs. Moreover, we highlight that the polymer Bragg gratings exhibit a remarkable stable reflected spectrum for over two years. Finally, the experimentally determined spectral characteristics of the Bragg gratings are compared to simulated results revealing excellent agreement.


  • Open Access

    Waveguide Bragg gratings in Ormocer hybrid polymers

    by Maiko Girschikofsky, Michael Förthner, Mathias Rommel, Lothar Frey, Ralf Hellmann

    We report on the fabrication of Bragg gratings within rib-type waveguides of previously UV-cured inorganic-organic Ormocer hybrid polymers by applying the interferometric phase mask technique in conjunction with deep-UV laser radiation. The fabrication process as well as the influence of the applied laser fluence and the length of the Bragg grating on the characteristics of the Bragg grating’s transmission and reflection spectra are discussed and compared to numerical simulations and calculations. Depending on the applied laser fluence and the chosen grating length, waveguide Bragg gratings with strong reflectivities of up to 98 % and narrow bandwidths of down to 120 pm have been achieved.


  • Flexible Polymer Shape Sensor Based on Planar Waveguide Bragg Gratings

    by M. Rosenberger, H. Pauer, M. Girschikofsky, H. Woern, B. Schmauss, R. Hellmann

    A newly developed concept for a miniaturized optical shape sensor is demonstrated. The sensor consists of a flexible polymer bending beam with two integrated optical waveguide Bragg gratings spatially staggered to each other. We report on the basic layout and the fabrication process and characterize the fundamental sensing response by an elaborate testing scheme. The polymer shape sensor reveals a pronounced spectral shift of the Bragg wavelength of several nanometers upon deformation with a distinct directionality. In conjunction with an undiscernible hysteresis, these results highlight the general applicability of the polymer Bragg grating-based bending beam as a shape sensor.