Sang-Hee Yoon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sang-Hee Yoon has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
Jong-Soo Oh
Fuze Laboratory, Agency for Defense Development, Yuseong P.O. Box 35-5, Daejeon 305-600, Republic of Korea
2 shared publicationsSeok-Woo Lee
Fuze Laboratory, Agency for Defense Development, Yuseong P.O. Box 35-5, Daejeon 305-600, Republic of Korea
2 shared publicationsYoung-Ho Lee
Fuze Laboratory, Agency for Defense Development, Yuseong P.O. Box 35-5, Daejeon 305-600, Republic of Korea
2 shared publications
Latest Publications
- 1 October 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19300395,p. 1227-1230
A Miniaturized Turn-Counting Sensor Using Geomagnetism for Detecting Flight Range of Ammunition
This paper presents a miniaturized turn-counting sensor (mu-TCS), where geomagnetism and high-rpm rotation of ammunition fired by a rifled gun are used to detect the turn number of the ammunition based on Faraday's law. The mu-TCS, composed of a coil and Co-based amorphous cores, is designed to effectively decrease the range error of small-caliber ammunition. The robust structure with no moving part makes it possible for mu-TCS to survive in a gunfire environment of ~30,000 g's. The mu-TCS has been designed on the basis of the simulation results of Maxwell reg 3D. In the experimental studies: static mu-TCS test using a solenoid-coil apparatus and dynamic mu-TCS test (firing test), the fabricated mu-TCS has shown that an induction voltage of 6.5 mV p-p is generated at a magnetic flux density of 0.05 mT and a rotational velocity of 30,000 rpm, achieving a SNR of 44.0 dB, a nonlinearity of 0.59% and a frequency-normalized sensitivity of 0.26plusmn0.01 V/T-Hz in a temperature range of -30 to +43degC. Firing test has verified the shock survivability of the mu-TCS in a high-g environment.
- 1 October 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19300395,p. 1227-1230
A Miniaturized Turn-Counting Sensor Using Geomagnetism for Detecting Flight Range of Ammunition
This paper presents a miniaturized turn-counting sensor (mu-TCS), where geomagnetism and high-rpm rotation of ammunition fired by a rifled gun are used to detect the turn number of the ammunition based on Faraday's law. The mu-TCS, composed of a coil and Co-based amorphous cores, is designed to effectively decrease the range error of small-caliber ammunition. The robust structure with no moving part makes it possible for mu-TCS to survive in a gunfire environment of ~30,000 g's. The mu-TCS has been designed on the basis of the simulation results of Maxwell reg 3D. In the experimental studies: static mu-TCS test using a solenoid-coil apparatus and dynamic mu-TCS test (firing test), the fabricated mu-TCS has shown that an induction voltage of 6.5 mV p-p is generated at a magnetic flux density of 0.05 mT and a rotational velocity of 30,000 rpm, achieving a SNR of 44.0 dB, a nonlinearity of 0.59% and a frequency-normalized sensitivity of 0.26plusmn0.01 V/T-Hz in a temperature range of -30 to +43degC. Firing test has verified the shock survivability of the mu-TCS in a high-g environment.
- Open Access
A Miniaturized Magnetic Induction Sensor Using Geomagnetism for Turn Count of Small-Caliber Ammunition
This paper presents a miniaturized magnetic induction sensor (MMIS), wheregeomagnetism and high rpm rotation of ammunition are used to detect the turn number ofthe ammunition for applications to small-caliber turn-counting fuzes. The MMIS, composedof cores and a coil, has a robust structure without moving parts to increase the shocksurvivability in a gunfire environment of ~30,000 g’s. The MMIS is designed and fabricatedon the basis of the simulation results of an electromagnetic analysis tool, Maxwell® 3D. Inthe experimental study, static MMIS test using a solenoid-coil apparatus and dynamicMMIS test (firing test) have been made. The present MMIS has shown that an inductionvoltage of 6.5 mVp-p is generated at a magnetic flux density of 0.05 mT and a rotationalvelocity of 30,000 rpm. From the measured signal, MMIS has shown a signal-to-noise ratioof 44.0 dB, a nonlinearity of 0.59%, a frequency-normalized sensitivity of 0.256±0.010V/T·Hz and a drift of 0.27% in the temperature range of -30~ 43°C. Firing test has shownthat the MMIS can be used as a turn-counting sensor for small-caliber ammunition,verifying the shock survivability of the MMIS in a high-g environment.
Open AccessA Miniaturized Magnetic Induction Sensor Using Geomagnetism for Turn Count of Small-Caliber Ammunition
This paper presents a miniaturized magnetic induction sensor (MMIS), wheregeomagnetism and high rpm rotation of ammunition are used to detect the turn number ofthe ammunition for applications to small-caliber turn-counting fuzes. The MMIS, composedof cores and a coil, has a robust structure without moving parts to increase the shocksurvivability in a gunfire environment of ~30,000 g’s. The MMIS is designed and fabricatedon the basis of the simulation results of an electromagnetic analysis tool, Maxwell® 3D. Inthe experimental study, static MMIS test using a solenoid-coil apparatus and dynamicMMIS test (firing test) have been made. The present MMIS has shown that an inductionvoltage of 6.5 mVp-p is generated at a magnetic flux density of 0.05 mT and a rotationalvelocity of 30,000 rpm. From the measured signal, MMIS has shown a signal-to-noise ratioof 44.0 dB, a nonlinearity of 0.59%, a frequency-normalized sensitivity of 0.256±0.010V/T·Hz and a drift of 0.27% in the temperature range of -30~ 43°C. Firing test has shownthat the MMIS can be used as a turn-counting sensor for small-caliber ammunition,verifying the shock survivability of the MMIS in a high-g environment.