Salvatore Masi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Salvatore Masi has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Donatella Caniani
Department of Health Sciences, University of Basilicata, Viale dell’Ateneo Lucano, 10, 85100 Potenza, Italy
6 shared publications - Ignazio Marcello Mancini
Department of Health Sciences, University of Basilicata, Viale dell’Ateneo Lucano, 10, 85100 Potenza, Italy
5 shared publications - Angela De Bonis
Department of Basic and Applied Sciences, University of Basilicata, 85100 Potenza, Italy
3 shared publications - Francesco Di Capua
Department of Engineering, University of Basilicata, Via Dell’Ateneo Lucano 10, 85100 Potenza, Italy
3 shared publications - Fabiano Asunis
Department of Civil and Environmental Engineering and Architecture, University of Cagliari, Via Marengo 2, 09123 Cagliari, Italy
2 shared publications - Gennaro Pace
Department of Engineering, University of Basilicata, Via Dell’Ateneo Lucano 10, 85100 Potenza, Italy
2 shared publications
Latest Publications
- Open Access
Valorization of Olive Pomace into Functional Hydrochars for Dye Removal from Water: Effects of Hydrothermal Carbonization and Soft Alkaline Activation
Olive pomace (OP), an abundant byproduct of the olive oil industry, was investigated as a low-cost precursor for the production of hydrochar-based adsorbents for methylene blue (MB) removal from water. Hydrothermal carbonization (HTC) was performed at 180 and 220 °C with different residence times, followed by soft alkaline activation (SAA), consisting of alkaline treatment and carbonization at 300 °C, and post-washing to improve the adsorption performance. The materials were characterized by ATR-FTIR, Raman spectroscopy, XRD, SEM-EDX, BET, and mercury intrusion porosimetry. HTC increased the degree of carbonization and surface area, but non-activated hydrochars showed lower adsorption capacity than untreated OP because of the loss of oxygenated functional groups. Among non-activated hydrochars, OP_220_1 showed the highest adsorption capacity (20.7 mg g−1). SAA increased the adsorption capacity of the hydrochar by 63%, while washing further enhanced performance by removing carbonate precipitates and restoring pore accessibility. The washed activated hydrochar derived from OP_220_1 achieved the highest adsorption capacity (69.9 mg g−1 at 250 mg L−1 MB) and BET surface area (40.0 m2 g−1). Kinetics followed the pseudo-second-order model, while washing shifted the isotherm behavior from Langmuir to Freundlich. A performance-based assessment showed that the washed activated hydrochar reduced adsorbent demand by 49% compared with untreated OP.
Open AccessValorization of Olive Pomace into Functional Hydrochars for Dye Removal from Water: Effects of Hydrothermal Carbonization and Soft Alkaline Activation
Olive pomace (OP), an abundant byproduct of the olive oil industry, was investigated as a low-cost precursor for the production of hydrochar-based adsorbents for methylene blue (MB) removal from water. Hydrothermal carbonization (HTC) was performed at 180 and 220 °C with different residence times, followed by soft alkaline activation (SAA), consisting of alkaline treatment and carbonization at 300 °C, and post-washing to improve the adsorption performance. The materials were characterized by ATR-FTIR, Raman spectroscopy, XRD, SEM-EDX, BET, and mercury intrusion porosimetry. HTC increased the degree of carbonization and surface area, but non-activated hydrochars showed lower adsorption capacity than untreated OP because of the loss of oxygenated functional groups. Among non-activated hydrochars, OP_220_1 showed the highest adsorption capacity (20.7 mg g−1). SAA increased the adsorption capacity of the hydrochar by 63%, while washing further enhanced performance by removing carbonate precipitates and restoring pore accessibility. The washed activated hydrochar derived from OP_220_1 achieved the highest adsorption capacity (69.9 mg g−1 at 250 mg L−1 MB) and BET surface area (40.0 m2 g−1). Kinetics followed the pseudo-second-order model, while washing shifted the isotherm behavior from Langmuir to Freundlich. A performance-based assessment showed that the washed activated hydrochar reduced adsorbent demand by 49% compared with untreated OP.
- Open Access
Microwave-Assisted Production and Regeneration of Granular Expanded Graphite for the Adsorption of Cationic Dye Methylene Blue from Aqueous Solutions
This study investigated the use of microwave (MW) to enhance the performance of a granular thermo-plasma expanded graphite (GTPEG) to remove an organic cationic dye, methylene blue (MB), from freshwater, taking the benefits of MW-assisted regeneration. Expanded graphite (EG), low-density and mesoporous, has been proposed previously as a means of extracting organic compounds from water due to its hydrophobicity and weak polarity. We granularized EG to facilitate its subsequent regeneration and reuse and separation, and MW was used to improve the adsorption of EG. The most important factors affecting adsorption were determined using response surface methodology, along with 3-D graphics illustrating the relationship between several variables. The experimental results show that 94% of MB adsorbed onto MW-GTPEG in deionized distilled water within 20 min. Additionally, adsorbent regeneration using MW did not affect the adsorption capacity and rate after 10 cycles albeit with a small weight loss of <8%. From our results, we believe that the main factor affecting the adsorption was the physical characteristics of the adsorbent, with other minor factors such as the adsorbent dose and initial concentration. Our findings suggest that MW irradiation may be a promising alternative for enhancing and regenerating GTPEG.
Open AccessMicrowave-Assisted Production and Regeneration of Granular Expanded Graphite for the Adsorption of Cationic Dye Methylene Blue from Aqueous Solutions
This study investigated the use of microwave (MW) to enhance the performance of a granular thermo-plasma expanded graphite (GTPEG) to remove an organic cationic dye, methylene blue (MB), from freshwater, taking the benefits of MW-assisted regeneration. Expanded graphite (EG), low-density and mesoporous, has been proposed previously as a means of extracting organic compounds from water due to its hydrophobicity and weak polarity. We granularized EG to facilitate its subsequent regeneration and reuse and separation, and MW was used to improve the adsorption of EG. The most important factors affecting adsorption were determined using response surface methodology, along with 3-D graphics illustrating the relationship between several variables. The experimental results show that 94% of MB adsorbed onto MW-GTPEG in deionized distilled water within 20 min. Additionally, adsorbent regeneration using MW did not affect the adsorption capacity and rate after 10 cycles albeit with a small weight loss of <8%. From our results, we believe that the main factor affecting the adsorption was the physical characteristics of the adsorbent, with other minor factors such as the adsorbent dose and initial concentration. Our findings suggest that MW irradiation may be a promising alternative for enhancing and regenerating GTPEG.
- Open Access
Hydrochar from Spent Coffee Ground as a Sustainable Adsorbent for Dye Removal from Water: Adsorption Characterization and Improvement via Soft Alkaline Activation
Spent coffee grounds (SCGs) are abundantly produced worldwide as a by-product of coffee brewing, and production is surging following the rise in global coffee consumption. Although the adsorption properties of raw SCGs have been investigated in previous studies, limited attention has been paid to the use of SCG-derived hydrochars as engineered adsorbents. In this work, hydrochars produced via hydrothermal carbonization (HTC) of SCGs at different temperatures were systematically assessed for their capacity to remove methylene blue (MB) dye from aqueous solution. The effect of HTC temperature and soft alkaline activation on MB adsorption were evaluated through adsorption batch tests. The soft alkaline activation increased the experimental adsorption capacity from −1 for untreated hydrochars to approximately 100 mg g−1 at 20 °C, while Langmuir isotherm analysis yielded a monolayer capacity of 147.1 mg g−1 at the same temperature; experimental uptake further increased to 215.6 mg g−1 at 40 °C and high dye concentrations. Kinetic, isotherm, and thermodynamic tests were performed on selected materials to describe their adsorption behavior and potential mechanisms. Microscopic, diffraction, spectroscopic, and porosimetric analyses were performed to investigate the structural differences among the tested materials. This study shows that temperature regulation and soft alkaline activation can strongly improve the adsorption capacity of the hydrochars, producing competitive low-cost adsorbents from a waste material in compliance with the principles of the circular economy.
Open AccessHydrochar from Spent Coffee Ground as a Sustainable Adsorbent for Dye Removal from Water: Adsorption Characterization and Improvement via Soft Alkaline Activation
Spent coffee grounds (SCGs) are abundantly produced worldwide as a by-product of coffee brewing, and production is surging following the rise in global coffee consumption. Although the adsorption properties of raw SCGs have been investigated in previous studies, limited attention has been paid to the use of SCG-derived hydrochars as engineered adsorbents. In this work, hydrochars produced via hydrothermal carbonization (HTC) of SCGs at different temperatures were systematically assessed for their capacity to remove methylene blue (MB) dye from aqueous solution. The effect of HTC temperature and soft alkaline activation on MB adsorption were evaluated through adsorption batch tests. The soft alkaline activation increased the experimental adsorption capacity from −1 for untreated hydrochars to approximately 100 mg g−1 at 20 °C, while Langmuir isotherm analysis yielded a monolayer capacity of 147.1 mg g−1 at the same temperature; experimental uptake further increased to 215.6 mg g−1 at 40 °C and high dye concentrations. Kinetic, isotherm, and thermodynamic tests were performed on selected materials to describe their adsorption behavior and potential mechanisms. Microscopic, diffraction, spectroscopic, and porosimetric analyses were performed to investigate the structural differences among the tested materials. This study shows that temperature regulation and soft alkaline activation can strongly improve the adsorption capacity of the hydrochars, producing competitive low-cost adsorbents from a waste material in compliance with the principles of the circular economy.
- Open Access
- 30 January 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (3) , 2454
Sustainable Adsorbent Material Prepared by Soft Alkaline Activation of Spent Coffee Grounds: Characterisation and Adsorption Mechanism of Methylene Blue from Aqueous Solutions
Dyes are emerging as hazardous pollutants, which are the primary challenges for environmentalists. Dye removal from effluents is urgently needed. Adsorption technology has been widely employed in this context as an effective method for removing colours from the aqueous phase, and adsorption with the use of low-cost adsorbents has been shown to be more successful on a larger scale than other methods. In this study, spent coffee grounds (SCGs) were used as the precursor for the preparation of a low-cost activated carbon through the chemical activation with NaOH. The SCG sample was impregnated with NaOH and carbonised at 300 °C for three hours. Its morphological and physical-chemical properties were assessed using scanning electron microscopy (SEM), X-ray diffraction, and Raman spectroscopy analyses. The performance of the treated SCG as an adsorbent material for methylene blue (MB) was evaluated by analysing the effect of the initial pH ionic strength on the adsorption capacity and by evaluating the kinetics and the mechanisms of the process (using adsorption isotherms). The effect of the initial concentration (500 and 250 mg L−1) of MB on the kinetics of the process and the impact of the initial pH (7.5 and 6) on the adsorption isotherm were evaluated. The obtained results show that the pseudo-second order model controls the process for both the investigated initial concentration and the adsorption capacity, which are 142.8 and 113.6 mg L−1, respectively. The results indicate that the pH value influences the adsorption isotherm model that regulates the process. Specifically, this process is regulated by the Temkin’s model with a pH of 7.5 and by the Langmuir’s model with a pH of 6. The thermodynamics of the process were also determined. The results show that SCG, treated and carbonised by soft alkaline activation, is a promising low-cost adsorbent material as its performance is comparable to that of conventional active carbon materials.
- 30 January 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (3) , 2454
Open AccessSustainable Adsorbent Material Prepared by Soft Alkaline Activation of Spent Coffee Grounds: Characterisation and Adsorption Mechanism of Methylene Blue from Aqueous Solutions
Dyes are emerging as hazardous pollutants, which are the primary challenges for environmentalists. Dye removal from effluents is urgently needed. Adsorption technology has been widely employed in this context as an effective method for removing colours from the aqueous phase, and adsorption with the use of low-cost adsorbents has been shown to be more successful on a larger scale than other methods. In this study, spent coffee grounds (SCGs) were used as the precursor for the preparation of a low-cost activated carbon through the chemical activation with NaOH. The SCG sample was impregnated with NaOH and carbonised at 300 °C for three hours. Its morphological and physical-chemical properties were assessed using scanning electron microscopy (SEM), X-ray diffraction, and Raman spectroscopy analyses. The performance of the treated SCG as an adsorbent material for methylene blue (MB) was evaluated by analysing the effect of the initial pH ionic strength on the adsorption capacity and by evaluating the kinetics and the mechanisms of the process (using adsorption isotherms). The effect of the initial concentration (500 and 250 mg L−1) of MB on the kinetics of the process and the impact of the initial pH (7.5 and 6) on the adsorption isotherm were evaluated. The obtained results show that the pseudo-second order model controls the process for both the investigated initial concentration and the adsorption capacity, which are 142.8 and 113.6 mg L−1, respectively. The results indicate that the pH value influences the adsorption isotherm model that regulates the process. Specifically, this process is regulated by the Temkin’s model with a pH of 7.5 and by the Langmuir’s model with a pH of 6. The thermodynamics of the process were also determined. The results show that SCG, treated and carbonised by soft alkaline activation, is a promising low-cost adsorbent material as its performance is comparable to that of conventional active carbon materials.
- Open Access
- 21 June 2022
- Published by MDPI AG in Environmental Sciences Proceedings
- Vol. 16 (1) , 62
Eco-Efficient Approach for Wastewater Treatment and Agricultural Valorization: Fertigation Effect on Soil and Plant
In the present research, an alternative eco-efficient biotechnology system, both selective and environmentally viable, is proposed and compared to a conventional scheme. The results showed an optimal process function and a significant difference (p < 0.001) in wastewater measured quality parameters compared to the conventional scheme. Indeed, the treated wastewater from the eco-efficient process revealed significant concentrations of organic matter and nutrients. Accordingly, there was an improvement in soil and plant quality parameters as a result of irrigation with raw urban wastewater and treated wastewater from the eco-efficient system compared to ground water.
- 21 June 2022
- Published by MDPI AG in Environmental Sciences Proceedings
- Vol. 16 (1) , 62
Open AccessEco-Efficient Approach for Wastewater Treatment and Agricultural Valorization: Fertigation Effect on Soil and Plant
In the present research, an alternative eco-efficient biotechnology system, both selective and environmentally viable, is proposed and compared to a conventional scheme. The results showed an optimal process function and a significant difference (p < 0.001) in wastewater measured quality parameters compared to the conventional scheme. Indeed, the treated wastewater from the eco-efficient process revealed significant concentrations of organic matter and nutrients. Accordingly, there was an improvement in soil and plant quality parameters as a result of irrigation with raw urban wastewater and treated wastewater from the eco-efficient system compared to ground water.
- Open Access
- 19 April 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (8) , 3319
Decentralized Community Composting: Past, Present and Future Aspects of Italy
Italy is among the top biowaste-generating countries in Europe, and has a well-structured waste management framework with quite a number of centralized composting facilities. In recent years, there has also been huge interest from local communities in decentralized composting. Although decentralized community composting is common in some countries, there is still a lack of information on the operative environment together with its potential logistical, environmental, economic, and social impacts. Considering the national Italian legislation on community composting as well as successfully implemented projects at EU level, Italy can set a model especially for Mediterranean countries that intend to build decentralized composting programs. Therefore, in the context of this review paper, a brief overview of the composting process was presented together with main applications in centralized and especially in decentralized composting, while the main focus was kept on the operative and legislative information gathered from Italian community composting. There is a huge difference in the number of composting plants between the regions, and the lack of centralized facilities in the central and southern regions can be supported by decentralized solutions. Decentralizing waste treatment facilities and thus creating local solutions to urban waste management strategies will help to achieve the resource recovery and valorization targets in line with the circular economy.
- 19 April 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (8) , 3319
Open AccessDecentralized Community Composting: Past, Present and Future Aspects of Italy
Italy is among the top biowaste-generating countries in Europe, and has a well-structured waste management framework with quite a number of centralized composting facilities. In recent years, there has also been huge interest from local communities in decentralized composting. Although decentralized community composting is common in some countries, there is still a lack of information on the operative environment together with its potential logistical, environmental, economic, and social impacts. Considering the national Italian legislation on community composting as well as successfully implemented projects at EU level, Italy can set a model especially for Mediterranean countries that intend to build decentralized composting programs. Therefore, in the context of this review paper, a brief overview of the composting process was presented together with main applications in centralized and especially in decentralized composting, while the main focus was kept on the operative and legislative information gathered from Italian community composting. There is a huge difference in the number of composting plants between the regions, and the lack of centralized facilities in the central and southern regions can be supported by decentralized solutions. Decentralizing waste treatment facilities and thus creating local solutions to urban waste management strategies will help to achieve the resource recovery and valorization targets in line with the circular economy.
- Open Access
- 23 November 2017
- Published by MDPI AG in Sustainability
- Vol. 9 (12) , 2161
Wastewater Reuse: An Economic Perspective to Identify Suitable Areas for Poplar Vegetation Filter Systems for Energy Production
The increasing interest towards climate change, water and energy saving, and soil protection has led the research community to consider non-conventional water as a sustainable source for irrigation of energy crops. Vegetation filter systems are considered a reliable technique for sustainable biomass cultivation, enabling the use of reclaimed wastewater as water and nutrients sources during irrigation periods. In this study, a geographic information system (GIS)-based spatial model was developed to identify areas potentially suitable for creating vegetation filter systems with poplars to size the plants of energy production. An economic assessment allowed us to identify the cost-effectiveness areas for biomass production that can be fertigated by reclaimed wastewater. Considering the Basilicata region as the test region, a surface area of 258,512 ha was investigated, identifying 73,331 ha of SRF soils sited downstream of 45 wastewater treatment plants (WWTPs). However, considering only areas that have positive net present value and are economically attractive, results indicate 1606 ha of SRF falling within the areas of influence of 39 WWTPs. The results show that the sector of dedicated crops, adjacent and linked with WWTPs, expresses a total capacity of 50.56 MW for thermal, 8.25 MW for electricity, and 31 MW for cogeneration (25.07 MWt and 5.94 MWe) plants.
- 23 November 2017
- Published by MDPI AG in Sustainability
- Vol. 9 (12) , 2161
Open AccessWastewater Reuse: An Economic Perspective to Identify Suitable Areas for Poplar Vegetation Filter Systems for Energy Production
The increasing interest towards climate change, water and energy saving, and soil protection has led the research community to consider non-conventional water as a sustainable source for irrigation of energy crops. Vegetation filter systems are considered a reliable technique for sustainable biomass cultivation, enabling the use of reclaimed wastewater as water and nutrients sources during irrigation periods. In this study, a geographic information system (GIS)-based spatial model was developed to identify areas potentially suitable for creating vegetation filter systems with poplars to size the plants of energy production. An economic assessment allowed us to identify the cost-effectiveness areas for biomass production that can be fertigated by reclaimed wastewater. Considering the Basilicata region as the test region, a surface area of 258,512 ha was investigated, identifying 73,331 ha of SRF soils sited downstream of 45 wastewater treatment plants (WWTPs). However, considering only areas that have positive net present value and are economically attractive, results indicate 1606 ha of SRF falling within the areas of influence of 39 WWTPs. The results show that the sector of dedicated crops, adjacent and linked with WWTPs, expresses a total capacity of 50.56 MW for thermal, 8.25 MW for electricity, and 31 MW for cogeneration (25.07 MWt and 5.94 MWe) plants.
- Open Access
Hierarchical Classification of Groundwater Pollution Risk of Contaminated Sites Using Fuzzy Logic: A Case Study in the Basilicata Region (Italy)
Groundwater is an important source of water. Since the control and removal of pollution are expensive, it is essential to identify the possible sources of contamination and to correctly classify groundwater on the basis of its intrinsic and integrated vulnerability. In the last years, many fuzzy models have been developed. There is a lack, however, of studies concerning the application of fuzzy logic for the assessment of the susceptibility of groundwater quality to anthropogenic activities and comparing these methods with traditional methods. The fuzzy model described in this paper assesses the aquifer integrated environmental vulnerability connected to the presence of illegal dumpsites and allows us to hierarchically classify them within a hazard scale. The results allowed us to carry out a comparison of the proposed fuzzy method with a traditional method. The fuzzy method proved to be a useful and objective tool for environmental planning.
Open AccessHierarchical Classification of Groundwater Pollution Risk of Contaminated Sites Using Fuzzy Logic: A Case Study in the Basilicata Region (Italy)
Groundwater is an important source of water. Since the control and removal of pollution are expensive, it is essential to identify the possible sources of contamination and to correctly classify groundwater on the basis of its intrinsic and integrated vulnerability. In the last years, many fuzzy models have been developed. There is a lack, however, of studies concerning the application of fuzzy logic for the assessment of the susceptibility of groundwater quality to anthropogenic activities and comparing these methods with traditional methods. The fuzzy model described in this paper assesses the aquifer integrated environmental vulnerability connected to the presence of illegal dumpsites and allows us to hierarchically classify them within a hazard scale. The results allowed us to carry out a comparison of the proposed fuzzy method with a traditional method. The fuzzy method proved to be a useful and objective tool for environmental planning.
- Open Access
- 12 December 2013
- Published by MDPI AG in Sustainability
- Vol. 5 (12) , 5333-5346
Incineration of Pre-Treated Municipal Solid Waste (MSW) for Energy Co-Generation in a Non-Densely Populated Area
The planning actions in municipal solid waste (MSW) management must follow strategies aimed at obtaining economies of scale. At the regional basin, a proper feasibility analysis of treatment and disposal plants should be based on the collection and analysis of data available on production rate and technological characteristics of waste. Considering the regulations constraint, the energy recovery is limited by the creation of small or medium-sized incineration plants, while separated collection strongly influences the heating value of the residual MSW. Moreover, separated collection of organic fraction in non-densely populated area is burdensome and difficult to manage. The paper shows the results of the analysis carried out to evaluate the potential energy recovery using a combined cycle for the incineration of mechanically pre-treated MSW in Basilicata, a non-densely populated region in Southern Italy. In order to focalize the role of sieving as pre-treatment, the evaluation on the MSW sieved fraction heating value was presented. Co-generative (heat and power production) plant was compared to other MSW management solutions (e.g., direct landfilling), also considering the environmental impact in terms of greenhouse gases (GHGs) emissions.
- 12 December 2013
- Published by MDPI AG in Sustainability
- Vol. 5 (12) , 5333-5346
Open AccessIncineration of Pre-Treated Municipal Solid Waste (MSW) for Energy Co-Generation in a Non-Densely Populated Area
The planning actions in municipal solid waste (MSW) management must follow strategies aimed at obtaining economies of scale. At the regional basin, a proper feasibility analysis of treatment and disposal plants should be based on the collection and analysis of data available on production rate and technological characteristics of waste. Considering the regulations constraint, the energy recovery is limited by the creation of small or medium-sized incineration plants, while separated collection strongly influences the heating value of the residual MSW. Moreover, separated collection of organic fraction in non-densely populated area is burdensome and difficult to manage. The paper shows the results of the analysis carried out to evaluate the potential energy recovery using a combined cycle for the incineration of mechanically pre-treated MSW in Basilicata, a non-densely populated region in Southern Italy. In order to focalize the role of sieving as pre-treatment, the evaluation on the MSW sieved fraction heating value was presented. Co-generative (heat and power production) plant was compared to other MSW management solutions (e.g., direct landfilling), also considering the environmental impact in terms of greenhouse gases (GHGs) emissions.
- 1 December 2010
- Published by IWA Publishing in Water Science & Technology
- Vol. 62 (12) , 2760-2768
A neural network approach for on-line fault detection of nitrogen sensors in alternated active sludge treatment plants
In this paper, an effective strategy for fault detection of nitrogen sensors in alternated active sludge treatment plants is proposed and tested on a simulated set-up. It is based on two predictive neural networks, which are trained using a historical set of data collected during fault-free operation of a wastewater treatment plant and their ability to predict reduced (ammonium) and oxidized (nitrates and nitrites) nitrogen is tested. The neural networks are also characterized by good generalization ability and robustness with respect to the influent variability with time and weather conditions. Then, simulations have been carried out imposing different kinds of fault on both sensors, as isolated spikes, abrupt bias and increased noise. Processing of residuals, based on the difference between measured concentration values and neural networks predictions, allows a quick revealing of the fault as well as the isolation of the corrupted sensor.
- 1 December 2010
- Published by IWA Publishing in Water Science & Technology
- Vol. 62 (12) , 2760-2768
A neural network approach for on-line fault detection of nitrogen sensors in alternated active sludge treatment plants
In this paper, an effective strategy for fault detection of nitrogen sensors in alternated active sludge treatment plants is proposed and tested on a simulated set-up. It is based on two predictive neural networks, which are trained using a historical set of data collected during fault-free operation of a wastewater treatment plant and their ability to predict reduced (ammonium) and oxidized (nitrates and nitrites) nitrogen is tested. The neural networks are also characterized by good generalization ability and robustness with respect to the influent variability with time and weather conditions. Then, simulations have been carried out imposing different kinds of fault on both sensors, as isolated spikes, abrupt bias and increased noise. Processing of residuals, based on the difference between measured concentration values and neural networks predictions, allows a quick revealing of the fault as well as the isolation of the corrupted sensor.