Caner Durucan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Caner Durucan has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Baris Alkan
Department of Metallurgical and Materials Engineering, Middle East Technical University, Ankara, Turkey
1 shared publicationBetul Akkopru
Department of Metallurgical and Materials Engineering, Middle East Technical University, Ankara 06531, Turkey
1 shared publication- Betul Akkopru
Middle East Technical University
1 shared publication Betul Akkopru Akgun
Middle East Technical University
1 shared publicationDerya Kapusuz
Department of Metallurgical and Materials Engineering, Middle East Technical University, 06531 Ankara, Turkey
1 shared publication- Eda Ayse Aksoy
Hacettepe University
1 shared publication
Latest Publications
- Open Access
- 23 December 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Medicine
- Vol. 33 (1) , 1-11
Complete chemical and structural characterization of selenium-incorporated hydroxyapatite
Hydroxyapatite (HAp) has long been used as synthetic bone tissue replacement material. Recent advances in this area have led to development of dual-functional bioceramics exhibiting high biocompability/osteoconductivity together with the therapeutic effect. Selenium, in that respect, is an effective therapeutic agent with promising antioxidant activity and anticancer effects. In this study, selenium-incorporated hydroxyapatite (HAp:Se) particles have been synthesized by modified aqueous precipitation method using calcium (Ca(NO3)2·4H2O) and phosphate ((NH4)2HPO4) salts and sodium selenite (Na2SeO3). The effects of selenium incorporation and post-synthesis calcination treatment (900–1100 °C) on physical, chemical properties and crystal structure of resultant HAp powders have been investigated. Complete chemical identification was performed with spectroscopical analyses including Fourier transform infrared and x-ray photoelectron spectroscopy to elucidate the mechanism and chemical nature of selenium incorporation in HAp. Meanwhile, detailed x-ray diffraction studies by Rietveld refinement have conducted to explain changes in the HAp crystal structure upon selenium incorporation.
- 23 December 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Medicine
- Vol. 33 (1) , 1-11
Open AccessComplete chemical and structural characterization of selenium-incorporated hydroxyapatite
Hydroxyapatite (HAp) has long been used as synthetic bone tissue replacement material. Recent advances in this area have led to development of dual-functional bioceramics exhibiting high biocompability/osteoconductivity together with the therapeutic effect. Selenium, in that respect, is an effective therapeutic agent with promising antioxidant activity and anticancer effects. In this study, selenium-incorporated hydroxyapatite (HAp:Se) particles have been synthesized by modified aqueous precipitation method using calcium (Ca(NO3)2·4H2O) and phosphate ((NH4)2HPO4) salts and sodium selenite (Na2SeO3). The effects of selenium incorporation and post-synthesis calcination treatment (900–1100 °C) on physical, chemical properties and crystal structure of resultant HAp powders have been investigated. Complete chemical identification was performed with spectroscopical analyses including Fourier transform infrared and x-ray photoelectron spectroscopy to elucidate the mechanism and chemical nature of selenium incorporation in HAp. Meanwhile, detailed x-ray diffraction studies by Rietveld refinement have conducted to explain changes in the HAp crystal structure upon selenium incorporation.
- 28 September 2012
- Published by Springer Nature in Journal of Materials Research
- Vol. 28 (2) , 175-184
Synthesis of DNA-encapsulated silica elaborated by sol–gel routes
- 28 September 2012
- Published by Springer Nature in Journal of Materials Research
- Vol. 28 (2) , 175-184
Synthesis of DNA-encapsulated silica elaborated by sol–gel routes
- 13 March 2012
- Published by Springer Nature in Journal of Materials Research
- Vol. 27 (11) , 1452-1461
Effect of precipitation temperature and organic additives on size and morphology of ZnO nanoparticles
- 13 March 2012
- Published by Springer Nature in Journal of Materials Research
- Vol. 27 (11) , 1452-1461
Effect of precipitation temperature and organic additives on size and morphology of ZnO nanoparticles
- 2 March 2012
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 62 (2) , 240-251
Silver containing sol–gel derived silica thin films: effect of aluminum incorporation on optical, microstructural and bactericidal properties
- 2 March 2012
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 62 (2) , 240-251
Silver containing sol–gel derived silica thin films: effect of aluminum incorporation on optical, microstructural and bactericidal properties
- 29 March 2011
- Published by Springer Nature in Journal of Materials Science: Materials in Medicine
- Vol. 22 (4) , 809-817
Alpha-tricalcium phosphate (α-TCP): solid state synthesis from different calcium precursors and the hydraulic reactivity
The effects of solid state synthesis process parameters and primary calcium precursor on the cement-type hydration efficiency (at 37°C) of α-tricalcium phosphate (Ca3(PO4)2 or α-TCP) into hydroxyapatite (Ca10−xHPO4(PO4)6−x(OH)2−x x = 0–1, or HAp) have been investigated. α-TCP was synthesized by firing of stoichiometric amount of calcium carbonate (CaCO3) and monetite (CaHPO4) at 1150–1350°C for 2 h. Three commercial grade CaCO3 powders of different purity were used as the starting material and the resultant α-TCP products for all synthesis routes were compared in terms of the material properties and the reactivity. The reactant CaHPO4 was also custom synthesized from the respective CaCO3 source. A low firing temperature in the range of 1150–1350°C promoted formation of β-polymorph as a second phase in the resultant TCP. Meanwhile, higher firing temperatures resulted in phase pure α-TCP with poor hydraulic reactivity. The extension of firing operation also led to a decrease in the reactivity. It was found that identical synthesis history, morphology, particle size and crystallinity match between the α-TCPs produced from different CaCO3 sources do not essentially culminate in products exhibiting similar hydraulic reactivity. The changes in reactivity are arising from differences in the trace amount of impurities found in the CaCO3 precursors. In this regard, a correlation between the observed hydraulic reactivities and the impurity content of the CaCO3 powders—as determined by inductively coupled plasma mass spectrometry—has been established. A high level of magnesium impurity in the CaCO3 almost completely hampers the hydration of α-TCP. This impurity also favors formation of β- instead of α-polymorph in the product of TCP upon firing.
- 29 March 2011
- Published by Springer Nature in Journal of Materials Science: Materials in Medicine
- Vol. 22 (4) , 809-817
Alpha-tricalcium phosphate (α-TCP): solid state synthesis from different calcium precursors and the hydraulic reactivity
The effects of solid state synthesis process parameters and primary calcium precursor on the cement-type hydration efficiency (at 37°C) of α-tricalcium phosphate (Ca3(PO4)2 or α-TCP) into hydroxyapatite (Ca10−xHPO4(PO4)6−x(OH)2−x x = 0–1, or HAp) have been investigated. α-TCP was synthesized by firing of stoichiometric amount of calcium carbonate (CaCO3) and monetite (CaHPO4) at 1150–1350°C for 2 h. Three commercial grade CaCO3 powders of different purity were used as the starting material and the resultant α-TCP products for all synthesis routes were compared in terms of the material properties and the reactivity. The reactant CaHPO4 was also custom synthesized from the respective CaCO3 source. A low firing temperature in the range of 1150–1350°C promoted formation of β-polymorph as a second phase in the resultant TCP. Meanwhile, higher firing temperatures resulted in phase pure α-TCP with poor hydraulic reactivity. The extension of firing operation also led to a decrease in the reactivity. It was found that identical synthesis history, morphology, particle size and crystallinity match between the α-TCPs produced from different CaCO3 sources do not essentially culminate in products exhibiting similar hydraulic reactivity. The changes in reactivity are arising from differences in the trace amount of impurities found in the CaCO3 precursors. In this regard, a correlation between the observed hydraulic reactivities and the impurity content of the CaCO3 powders—as determined by inductively coupled plasma mass spectrometry—has been established. A high level of magnesium impurity in the CaCO3 almost completely hampers the hydration of α-TCP. This impurity also favors formation of β- instead of α-polymorph in the product of TCP upon firing.
- 2 April 2010
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 93B (2) , 448-458
Effect of calcination on microstructure and antibacterial activity of silver‐containing silica coatings
Silver nanoparticle containing silica coatings on soda‐lime glass were prepared by the sol–gel process. The effect of thermal densification treatment at different temperatures in the range of 100–700°C on microstructure and antibacterial properties of the coatings were examined. The structural characterization of the coatings was performed by using scanning electron microscope, X‐ray diffraction, UV–visible and X‐ray photoelectron spectroscopy (XPS), and atomic force microscope (AFM). The antibacterial activity of the coatings was determined against Staphylococcus aureus by disk diffusion method. The mechanisms for formation and distribution of silver nanoparticles in the silica matrix with respect to the calcination temperature are discussed, and the correlation between the microstructural properties and antibacterial activity is described. The investigations revealed that silver nanoparticles were mainly in the metallic state during thermal treatments. AFM and XPS examinations proved that silver accumulated on the surface diffuse into glass substrate at higher calcination temperatures. A high level of antibacterial activity was observed for the coatings calcined at 300°C or lower temperatures allowing accommodation of silver on the surface of the coating. Silver diffusion into bulk via ion‐exchange with sodium and calcium ions from glass substrate during calcination at higher temperatures (500 or 700°C) resulted in apparent degradation in the antibacterial activity. © 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2010
- 2 April 2010
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 93B (2) , 448-458
Effect of calcination on microstructure and antibacterial activity of silver‐containing silica coatings
Silver nanoparticle containing silica coatings on soda‐lime glass were prepared by the sol–gel process. The effect of thermal densification treatment at different temperatures in the range of 100–700°C on microstructure and antibacterial properties of the coatings were examined. The structural characterization of the coatings was performed by using scanning electron microscope, X‐ray diffraction, UV–visible and X‐ray photoelectron spectroscopy (XPS), and atomic force microscope (AFM). The antibacterial activity of the coatings was determined against Staphylococcus aureus by disk diffusion method. The mechanisms for formation and distribution of silver nanoparticles in the silica matrix with respect to the calcination temperature are discussed, and the correlation between the microstructural properties and antibacterial activity is described. The investigations revealed that silver nanoparticles were mainly in the metallic state during thermal treatments. AFM and XPS examinations proved that silver accumulated on the surface diffuse into glass substrate at higher calcination temperatures. A high level of antibacterial activity was observed for the coatings calcined at 300°C or lower temperatures allowing accommodation of silver on the surface of the coating. Silver diffusion into bulk via ion‐exchange with sodium and calcium ions from glass substrate during calcination at higher temperatures (500 or 700°C) resulted in apparent degradation in the antibacterial activity. © 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2010
- 29 January 2009
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 90B (2) , 574-583
Preparation of hydroxyapatite‐titania hybrid coatings on titanium alloy
Hydroxypapatite‐titania hybrid films on Ti6Al4V alloys were prepared by sol–gel technique by incorporating presynthesized hydroxypapatite (Ca10(PO4)6(OH)2 or HAp) powders into a titanium‐alkoxide dip coating solution. Titania network was formed by the hydrolysis and condensation of Ti‐isopropoxide Ti[OCH(CH3)2]4‐based sols. The effect of titania sol formulation, specifically the effect of organic solvents on the microstructure of the dip coated films calcined at 500°C has been investigated. The coatings exhibit higher tendency for cracking when a high vapor pressure solvent, such as ethanol (C2H5OH) is used causing development of higher macroscopic stresses during evaporation of the sol. Titania sol formulations replacing the solvent with n‐proponal (CH3(CH2)2OH) and acetly‐acetone (C5H8O) combinations enhanced the microstructural integrity of the coating during evaporation and calcination treatments. Sol–gel processing parameters, such as multilayer coating application and withdrawal rate, can be employed to change the titania thickness in the range of 0.120–1.1 μm and to control the microstructure of HAp‐titania hybrid coatings. A high‐calcination temperature in the range of 400–600°C does not cause a distinct change in crystals nature of the titania matrix or HAp, but results in more cracking due to the combined effect of densification originated stresses and thermal stresses upon cooling. Slower withdraw rates and multilayer dip coating lead to coatings more vulnerable to microcracking. © 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2009
- 29 January 2009
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 90B (2) , 574-583
Preparation of hydroxyapatite‐titania hybrid coatings on titanium alloy
Hydroxypapatite‐titania hybrid films on Ti6Al4V alloys were prepared by sol–gel technique by incorporating presynthesized hydroxypapatite (Ca10(PO4)6(OH)2 or HAp) powders into a titanium‐alkoxide dip coating solution. Titania network was formed by the hydrolysis and condensation of Ti‐isopropoxide Ti[OCH(CH3)2]4‐based sols. The effect of titania sol formulation, specifically the effect of organic solvents on the microstructure of the dip coated films calcined at 500°C has been investigated. The coatings exhibit higher tendency for cracking when a high vapor pressure solvent, such as ethanol (C2H5OH) is used causing development of higher macroscopic stresses during evaporation of the sol. Titania sol formulations replacing the solvent with n‐proponal (CH3(CH2)2OH) and acetly‐acetone (C5H8O) combinations enhanced the microstructural integrity of the coating during evaporation and calcination treatments. Sol–gel processing parameters, such as multilayer coating application and withdrawal rate, can be employed to change the titania thickness in the range of 0.120–1.1 μm and to control the microstructure of HAp‐titania hybrid coatings. A high‐calcination temperature in the range of 400–600°C does not cause a distinct change in crystals nature of the titania matrix or HAp, but results in more cracking due to the combined effect of densification originated stresses and thermal stresses upon cooling. Slower withdraw rates and multilayer dip coating lead to coatings more vulnerable to microcracking. © 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2009
- 6 April 2007
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 43 (2) , 227-236
Preparation and microstructure of sol-gel derived silver-doped silica
- 6 April 2007
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 43 (2) , 227-236
Preparation and microstructure of sol-gel derived silver-doped silica