Kyekyoon (Kevin) Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kyekyoon (Kevin) Kim has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Hyungsoo Choi
Department of Electrical and Computer Engineering, University of Illinois at Urbana, Champaign, IL 61801, USA
7 shared publications Hui-Chan Seo
5 shared publicationsYoung Bin Choy
Department of Electrical and Computer Engineering, Thin Film and Charged Particle Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA
5 shared publicationsPatrick Chapman
University of Illinois at Urbana-Champaign
4 shared publicationsLiang Pang
3 shared publicationsChangwook Kim
2 shared publications
Latest Publications
- 21 October 2013
- Published by Wiley in Physica Status Solidi (a)
- Vol. 211 (1) , 180-183
High-current AlGaN/GaN high electron mobility transistors achieved by selective-area growth via plasma-assisted molecular beam epitaxy
- 21 October 2013
- Published by Wiley in Physica Status Solidi (a)
- Vol. 211 (1) , 180-183
High-current AlGaN/GaN high electron mobility transistors achieved by selective-area growth via plasma-assisted molecular beam epitaxy
- 6 August 2012
- Published by AIP Publishing in Applied Physics Letters
- Vol. 101 (6) , 063113
Transfer printing of flexible hybrid inductor-capacitor filters via pre-etched silicon-on-insulator mother wafer
An approach for the processing of flexible electronics is presented. To protect the functional insulator in the structure, hybrid inductor-capacitor (LC) filters were fabricated on the pre-etched silicon-on-insulator wafer, where the selectively patterned semi-stable Si-supporting membranes were sufficiently robust to support the entire device fabrication process, yet flexible enough to facilitate the subsequent transfer printing via adhesive stamp. When the LC filters were transferred to an elastomeric substrate, 20% compressibility was achieved, giving rise to “wavy” deformation of the devices and up to 9% variation in the electronic properties. Beyond the 20% strain, local delamination of the films resulted in mechanical instability.
- 6 August 2012
- Published by AIP Publishing in Applied Physics Letters
- Vol. 101 (6) , 063113
Transfer printing of flexible hybrid inductor-capacitor filters via pre-etched silicon-on-insulator mother wafer
An approach for the processing of flexible electronics is presented. To protect the functional insulator in the structure, hybrid inductor-capacitor (LC) filters were fabricated on the pre-etched silicon-on-insulator wafer, where the selectively patterned semi-stable Si-supporting membranes were sufficiently robust to support the entire device fabrication process, yet flexible enough to facilitate the subsequent transfer printing via adhesive stamp. When the LC filters were transferred to an elastomeric substrate, 20% compressibility was achieved, giving rise to “wavy” deformation of the devices and up to 9% variation in the electronic properties. Beyond the 20% strain, local delamination of the films resulted in mechanical instability.
- 13 April 2011
- Published by Wiley in Surface and Interface Analysis
- Vol. 43 (13) , 1627-1631
Interface analysis of Ti/Al/Ti/Au ohmic contacts with regrown n + ‐GaN layers using molecular beam epitaxy
The regrowth technique of highly doped n‐type GaN layers is reliable and effective for lowering the ohmic contact resistance. The interface between metal contacts with Ti/Al/Ti/Au and regrown n + ‐GaN/GaN layers were analyzed in detail with transmission electron microscopy. During the annealing process, Ti metals and N atoms diffusing from GaN layers formed TiN epitaxial layers between metal alloys and n + ‐GaN layers. The orientational relationship between GaN and TiN was [1 0 0] GaN //[−1 1 0] TiN verified by nano‐beam diffraction. Al atoms diffused through the GaN layers and formed thin AlGaN phase. Al content was confirmed as 60% by high‐resolution transmission electron microscopy images. Electron energy loss spectroscopy showed that Si dopants were confined within n + ‐GaN layers. These results show that in regrowth technique both TiN layers and Si dopants affect the contact properties because the formation of TiN layers can induce nitrogen vacancies from GaN, while Si‐doped GaN layers can enhance the tunneling effect through the metal contacts resulting in reduced contact resistance. Copyright © 2011 John Wiley & Sons, Ltd.
- 13 April 2011
- Published by Wiley in Surface and Interface Analysis
- Vol. 43 (13) , 1627-1631
Interface analysis of Ti/Al/Ti/Au ohmic contacts with regrown n + ‐GaN layers using molecular beam epitaxy
The regrowth technique of highly doped n‐type GaN layers is reliable and effective for lowering the ohmic contact resistance. The interface between metal contacts with Ti/Al/Ti/Au and regrown n + ‐GaN/GaN layers were analyzed in detail with transmission electron microscopy. During the annealing process, Ti metals and N atoms diffusing from GaN layers formed TiN epitaxial layers between metal alloys and n + ‐GaN layers. The orientational relationship between GaN and TiN was [1 0 0] GaN //[−1 1 0] TiN verified by nano‐beam diffraction. Al atoms diffused through the GaN layers and formed thin AlGaN phase. Al content was confirmed as 60% by high‐resolution transmission electron microscopy images. Electron energy loss spectroscopy showed that Si dopants were confined within n + ‐GaN layers. These results show that in regrowth technique both TiN layers and Si dopants affect the contact properties because the formation of TiN layers can induce nitrogen vacancies from GaN, while Si‐doped GaN layers can enhance the tunneling effect through the metal contacts resulting in reduced contact resistance. Copyright © 2011 John Wiley & Sons, Ltd.
- 3 June 2010
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 39 (8) , 1146-1151
Structural Properties of AlN Grown on Sapphire at Plasma Self-Heating Conditions Using Reactive Magnetron Sputter Deposition
- 3 June 2010
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 39 (8) , 1146-1151
Structural Properties of AlN Grown on Sapphire at Plasma Self-Heating Conditions Using Reactive Magnetron Sputter Deposition
- 9 March 2010
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 39 (5) , 499-503
Breakdown Voltage Enhancement of AlGaN/GaN High-Electron-Mobility Transistors via Selective-Area Growth for Ohmic Contacts over Ion Implantation
- 9 March 2010
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 39 (5) , 499-503
Breakdown Voltage Enhancement of AlGaN/GaN High-Electron-Mobility Transistors via Selective-Area Growth for Ohmic Contacts over Ion Implantation
- 2 March 2009
- Published by AIP Publishing in Applied Physics Letters
- Vol. 94 (9) , 092104
Elastic buckling of AlN ribbons on elastomeric substrate
For optoelectronic applications requiring unconventional substrates, use of flexible forms of semiconductors may be inevitable. We have fabricated a flexible form of single crystalline AlN ribbons with periodic and wavelike structures on an elastomeric substrate. Single crystalline AlN films were grown on Si (111) substrate using high vacuum unbalanced magnetron sputtering. Crystallinity of the AlN films was confirmed with x-ray diffraction and pole figure. The AlN ribbons were transferred to a prestrained (3.1%) elastomeric substrate and the resulting “wavy” ribbons on the substrate were flexible up to 30% strain without any crack formation on the surface. As the film thickness changed from 300 to 900 nm, the periods of the waves varied from 95 to , which were within a 10% error of the calculated values. When we applied more than 30% strain, mechanical instability, such as the failure of AlN ribbons due to the cracks on the surface and the merged ribbons, was observed.- 2 March 2009
- Published by AIP Publishing in Applied Physics Letters
- Vol. 94 (9) , 092104
Elastic buckling of AlN ribbons on elastomeric substrate
For optoelectronic applications requiring unconventional substrates, use of flexible forms of semiconductors may be inevitable. We have fabricated a flexible form of single crystalline AlN ribbons with periodic and wavelike structures on an elastomeric substrate. Single crystalline AlN films were grown on Si (111) substrate using high vacuum unbalanced magnetron sputtering. Crystallinity of the AlN films was confirmed with x-ray diffraction and pole figure. The AlN ribbons were transferred to a prestrained (3.1%) elastomeric substrate and the resulting “wavy” ribbons on the substrate were flexible up to 30% strain without any crack formation on the surface. As the film thickness changed from 300 to 900 nm, the periods of the waves varied from 95 to , which were within a 10% error of the calculated values. When we applied more than 30% strain, mechanical instability, such as the failure of AlN ribbons due to the cracks on the surface and the merged ribbons, was observed.- 25 November 2008
- Published by Wiley in Macromolecular Bioscience
- Vol. 8 (12) , 1173-1181
Uniform Chitosan Microspheres for Potential Application to Colon‐Specific Drug Delivery
Uniform chitosan microspheres have been fabricated and weakly crosslinked for potential applications in colon-specific drug delivery. The effects of microsphere size, crosslinking density and electrostatic interactions between the drug and chitosan on drug release were studied, employing model drugs of different acidities. When the drug was basic, all chitosan spheres exhibited 100% release within 30 min. As the acidity of the drug increased, the release slowed down and depended on the crosslinking density and microsphere size. The release of weakly acidic drug was most suppressed for large spheres (35–38 µm), while the small spheres (23–25 µm) with higher crosslinking exhibited the most retention of highly acidic drug, indicating that they are a promising candidate for colon-specific delivery.
- 25 November 2008
- Published by Wiley in Macromolecular Bioscience
- Vol. 8 (12) , 1173-1181
Uniform Chitosan Microspheres for Potential Application to Colon‐Specific Drug Delivery
Uniform chitosan microspheres have been fabricated and weakly crosslinked for potential applications in colon-specific drug delivery. The effects of microsphere size, crosslinking density and electrostatic interactions between the drug and chitosan on drug release were studied, employing model drugs of different acidities. When the drug was basic, all chitosan spheres exhibited 100% release within 30 min. As the acidity of the drug increased, the release slowed down and depended on the crosslinking density and microsphere size. The release of weakly acidic drug was most suppressed for large spheres (35–38 µm), while the small spheres (23–25 µm) with higher crosslinking exhibited the most retention of highly acidic drug, indicating that they are a promising candidate for colon-specific delivery.
- 31 July 2008
- Published by Wiley in Macromolecular Bioscience
- Vol. 8 (8) , 758-765
Monodisperse Gelatin Microspheres as a Drug Delivery Vehicle: Release Profile and Effect of Crosslinking Density
Uniform gelatin microspheres (GMS) of a wet size of 100 µm in diameter were fabricated by the electric field assisted precision particle fabrication (E‐PPF) method and crosslinked with different glutaraldehyde (GA) concentrations to study the effect of the crosslinking density on drug release. The drug release profiles of the crosslinked GMS were studied along with the intraparticle drug distribution and the particle degradation characteristics. Due to the concentration gradient of GA along the diffusion path into the GMS, the crosslinking density is higher on the GMS surface, making it less susceptible to degradation. As a result, the GMS with higher GA concentrations (0.375–0.875%) exhibited a highly resistant surface toward enzymatic degradation. On the other hand, the amount of drug complexation at the surface decreases as the GA concentration increases, which can be attributed to the lowered basicity of gelatin caused by the increased crosslinking density. These factors collectively affect the drug release kinetics and give rise to similar release profiles for GMS above a GA concentration of 0.375%. magnified image
- 31 July 2008
- Published by Wiley in Macromolecular Bioscience
- Vol. 8 (8) , 758-765
Monodisperse Gelatin Microspheres as a Drug Delivery Vehicle: Release Profile and Effect of Crosslinking Density
Uniform gelatin microspheres (GMS) of a wet size of 100 µm in diameter were fabricated by the electric field assisted precision particle fabrication (E‐PPF) method and crosslinked with different glutaraldehyde (GA) concentrations to study the effect of the crosslinking density on drug release. The drug release profiles of the crosslinked GMS were studied along with the intraparticle drug distribution and the particle degradation characteristics. Due to the concentration gradient of GA along the diffusion path into the GMS, the crosslinking density is higher on the GMS surface, making it less susceptible to degradation. As a result, the GMS with higher GA concentrations (0.375–0.875%) exhibited a highly resistant surface toward enzymatic degradation. On the other hand, the amount of drug complexation at the surface decreases as the GA concentration increases, which can be attributed to the lowered basicity of gelatin caused by the increased crosslinking density. These factors collectively affect the drug release kinetics and give rise to similar release profiles for GMS above a GA concentration of 0.375%. magnified image
- 19 May 2008
- Published by Wiley in Advanced Materials
- Vol. 20 (10) , 1859-1863
Copper Nanowires with a Five‐Twinned Structure Grown by Chemical Vapor Deposition
- 19 May 2008
- Published by Wiley in Advanced Materials
- Vol. 20 (10) , 1859-1863
Copper Nanowires with a Five‐Twinned Structure Grown by Chemical Vapor Deposition
- 1 May 2008
- Published by Wiley in SID Symposium Digest of Technical Papers
- Vol. 39 (1) , 163-166
13.4: Copper Nanowires with Five‐Twinned Structure Grown by Chemical Vapor Deposition and their Application to Field Emission Displays
A prototype field emission display device was fabricated using copper nanowires as emitters. The copper nanowires were grown by chemical vapor deposition without any catalyst or template, which were analyzed by electron microscopy to show a five‐fold twinned structure with a pentagonal pyramid tip. The electron diffraction pattern disclosed that the twin boundaries were mismatched irregularly. The anisotropic growth of the copper nanowires in gas phase could be attributed to the passivation of the {100} side planes by the phosphite molecules dissociated from the precursor. Field emission characteristics of the nanowires were measured.
- 1 May 2008
- Published by Wiley in SID Symposium Digest of Technical Papers
- Vol. 39 (1) , 163-166
13.4: Copper Nanowires with Five‐Twinned Structure Grown by Chemical Vapor Deposition and their Application to Field Emission Displays
A prototype field emission display device was fabricated using copper nanowires as emitters. The copper nanowires were grown by chemical vapor deposition without any catalyst or template, which were analyzed by electron microscopy to show a five‐fold twinned structure with a pentagonal pyramid tip. The electron diffraction pattern disclosed that the twin boundaries were mismatched irregularly. The anisotropic growth of the copper nanowires in gas phase could be attributed to the passivation of the {100} side planes by the phosphite molecules dissociated from the precursor. Field emission characteristics of the nanowires were measured.