RAReimer Andresen

Reimer Andresen

*This is an algorithmically generated author record based on publicly available information.

Reimer Andresen has a total of 171 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation of age- and sex-related changes in cancellous bone density in the human spine using CT

    by Guido Schröder, Aleksander J. Owczarek, Estelle Akl, Andreas Götz, Steffi S. I. Falk, Thomas Mittlmeier, Laura Hiepe, Andreas Büttner, Michael Dau, Daniel Wolter, et al.

    Studies of cancellous bone density across all spinal segments in relation to age and sex remain limited. This investigation aimed to quantify vertebral cancellous bone density in Hounsfield units (HU), to explore age‑ and sex‑related bone loss, and to compare HU measurements with bone mineral density (BMD) and bone volume fraction (BV/TV). Cancellous bone density was assessed in 71 spines (CT) covering vertebrae C3-L5 and the age range from 4 to 102 years. HU values were derived from mid‑vertebral regions, and in addition, BMD (L1-L3) and BV/TV measurements (Th12-L2, micro‑CT, 50 spines) in broad subsets of samples. The association between bone density and age was investigated by HU profiles along the spine in age groups and by regression approaches. HU values decreased with age (p < 0.001) and from cranial to caudal levels (p < 0.001), for both sexes (p < 0.001), with a marked reduction at the thoracolumbar junction beyond 60 years. Regression and cluster analyses revealed two phases of HU density loss with ongoing age, the second occurring in women (older than 64 years), later than in men (after 56 years) (p < 0.001). HU values were correlated with BMD (r = 0.86; 95% CI: 0.72–0.94) and with BV/TV (r = 0.51; 95% CI: 0.17–0.75). Density loss of bone with age is significant for BMD (for both sexes, p < 0.001) and for BV/TV (p ≤ 0.021), too, with an earlier reduction detected in the microarchitecture. These findings highlight the need for sex‑specific assessment and prevention strategies in osteoporosis research and clinical care.

  • Open Access

    Multilevel Lumbar CT Attenuation Beyond L1: Comparison with QCT-Derived Volumetric Bone Mineral Density and Prevalent Fragility Fracture Status in a Diagnostic Referral Cohort

    by Julian Ramin Andresen, Stephan Heisinger, Thomas Haider, Hans-Christof Schober, Reimer Andresen

    Background/Objectives: CT-based trabecular attenuation in Hounsfield units (HU) is used as a surrogate marker of bone quality, but most approaches rely on a single vertebral level, usually L1, where local abnormalities may limit reliability and availability. This study evaluated whether multilevel lumbar, reference-adjusted HU assessment beyond isolated L1 improves the identification of QCT-defined osteoporosis and the discrimination of prevalent fragility fracture status. Methods: Between 2021 and March 2024, 800 patients referred for evaluation of bone mineral density underwent QCT of the lumbar spine with a calibration phantom. Cancellous attenuation was measured in HU at L1–L3 using manually positioned ellipsoid regions of interest, with predefined adjacent levels (T12, L4) substituted when a target vertebra was unsuitable. Single-level HU, the mean multilevel HU value and the lowest valid HU value were compared with QCT-defined osteoporosis and prevalent fragility fracture status (vertebral or sacral) using ROC analyses and pairwise DeLong testing. Results: Mean multilevel HU correlated closely with mean vBMD (Spearman ρ = 0.988; p < 0.001); as both derive from the same acquisition, the same vertebral bodies and the same phantom, this reflects a strong association between two related measurements rather than validation against an independent standard. Osteoporosis was present in 483 patients (60.4%). Mean multilevel HU was associated with osteoporosis with an AUC of 0.996 (95% CI, 0.993–0.998) at an internally derived cut-off of ≤99.6 HU. In the 699 patients with a valid L1 measurement, in whom a paired comparison was possible, mean multilevel HU exceeded isolated L1-HU (0.992; p = 0.0028). For fracture status, the AUC was 0.975 (0.966–0.983) at ≤80.5 HU, without advantage over L1-HU (p = 0.816). A valid value was obtainable in all 800 patients versus 699 (87.4%) with L1 alone. All patients with a fracture had a vBMD below the osteoporosis threshold, so this endpoint is structurally dependent on the densitometric one. Conclusions: Multilevel lumbar HU assessment provides a practical marker of trabecular bone quality beyond isolated L1. Its principal advantage is measurement availability rather than a clinically meaningful gain in discrimination. The reported thresholds are internally derived, cohort- and protocol-specific, and require external validation.

  • Open Access

    High Prevalence of MRI Features of Mesenteric Panniculitis in Chronic Intestinal Inflammation: A Retrospective 3-T MRI Study

    by Vahidreza Tehranirad, Julian Ramin Andresen, Marc Olaf Liedke, Christoph Kopetsch, Fabian Scheer, Reimer Andresen

    Background/Objectives: Mesenteric panniculitis (MP) is a chronic inflammatory and sclerosing disorder of the mesenteric fat. This study evaluated the occurrence and MRI appearance of MP in patients with chronic inflammatory bowel disease and chronic inflammatory bowel conditions. Methods: In this retrospective single-center study, 312 individuals underwent standardized 3-T MRI Sellink examinations, including 252 patients with clinically confirmed chronic inflammatory bowel disease or chronic inflammatory bowel conditions and 60 control patients without intestinal inflammation. MP was diagnosed when at least three of five characteristic MRI findings were present: increased mesenteric signal intensity on fat-saturated fluid-sensitive T2 sequences, fat ring sign, pseudocapsule, embedded micronodules, and displacement of bowel loops. Group differences were analyzed using contingency table analysis with Monte Carlo exact testing; Pearson’s chi-square test and Holm-adjusted pairwise post hoc comparisons were additionally performed. A p-value < 0.05 was considered statistically significant. Results: MRI signs of MP were present in 221/312 patients (70.8%) overall, including 220/252 patients (87.3%) in the disease cohort and 1/60 patients (1.7%) in the control group. Among patients with MP, the underlying diseases/conditions were Crohn’s disease (104/220, 47.3%), sigmoid diverticulitis (88/220, 40.0%), and ulcerative colitis (28/220, 12.7%). The overall distribution of MP extent differed significantly among diagnostic groups (Monte Carlo exact test: p = 0.030), although adjusted pairwise comparisons were not statistically significant. Topographically, MP showed a clear predominance in the left upper quadrant. Conclusions: MRI-defined features consistent with mesenteric panniculitis are highly prevalent in this selected cohort of patients with chronic intestinal inflammatory conditions when standardized criteria are applied. These findings suggest that MP-like mesenteric changes may represent a common imaging correlate of chronic intestinal inflammation rather than a rare incidental finding. MRI enables consistent detection and topographic assessment of MP.

  • Open Access

    BMI-stratified performance of native CT hounsfield units in the proximal femur for osteoporosis detection and fracture association

    by Julian Ramin Andresen, Thomas Haider, Reimer Andresen

    Opportunistic computed tomography (CT) bone density assessment using Hounsfield units (HU) is increasingly used. Body mass index (BMI) may influence dual-energy X-ray absorptiometry (DXA), computed tomography X-ray absorptiometry of the hip (CTXA), and CT attenuation values, potentially affecting HU thresholds and fracture discrimination. We quantified associations between BMI, femoral HU, hip T-scores, and prevalent fractures. We retrospectively analyzed 600 consecutive patients (65.3 ± 14.1 years; 81% female; BMI 26.7 ± 6.5 kg/m²) who underwent CTXA hip assessment. Trabecular HU were measured on coronal CT images using a circular ROI in the femoral head and an irregular ROI in the proximal femur. BMI subgroups followed WHO categories. Spearman correlations (ρ) and linear regression analyses (R²) were performed. Multivariable linear and logistic regression models were adjusted for age and sex. BMI correlated positively with femoral HU and hip T-score (ρ = 0.46; p < 0.001). In multivariable models, each 1 kg/m² increase in BMI was associated with higher HU values (+ 3.32 HU; 95% CI 2.61–4.02) and higher hip T-score (+ 0.081; 95% CI 0.064–0.098; p < 0.001). Fracture prevalence decreased across BMI categories. HU values discriminated patients with and without hip fracture (AUC up to 0.99). Given the cross-sectional design, these values reflect discrimination within the study cohort rather than prospective predictive validity. No proximal femur fractures occurred above the osteoporosis threshold of 94.77 HU. BMI was independently associated with CT attenuation and CTXA-derived bone density parameters and inversely associated with prevalent fractures in this cohort. BMI should be considered when interpreting opportunistic HU measurements and applying fixed thresholds.

  • Open Access

    Diagnostic Value of Opportunistic CT-Based Bone Density Assessment in Patients with and Without Sacral Insufficiency Fractures

    by Julian Ramin Andresen, Guido Schröder, Thomas Haider, Hans-Christof Schober, Reimer Andresen

    Background/Objectives: This retrospective observational cohort examined whether opportunistic CT-derived Hounsfield units (HU) of the lumbar spine and proximal femur together with serum 25-OH-vitamin D can predict sacral insufficiency fractures (SIF) and osteoporosis. No interventional procedures were performed. Methods: Consecutive suspected SIF cases over 3 years (n = 253) were assigned to SIF (n = 98) or controls without SIF or spine/hip fractures (n = 155). HU were measured using ellipsoidal ROIs at L1–L3 and an irregular area ROI across the entire proximal femoral cancellous bone; vitamin D was quantified; ROC analyses assessed discrimination. HU cut-points were referenced via HU-to-QCT/CTXA conversions. Results: SIF patients had markedly lower HU than controls (lumbar 44.84 vs. 105.66 HU; femoral 47.0 vs. 148.0 HU). Diagnostic performance was excellent (AUC 0.98 for SIF discrimination using lumbar HU; AUC 0.98 for osteoporosis prediction using femoral HU). Vitamin D deficiency (<20 ng/mL) was highly prevalent (92.9%) with lower means in SIF (3.72 vs. 8.24 ng/mL). Within SIF, patients with hip fracture had femoral HU ≈ 14.2 vs. 70.6 without hip fracture; effect sizes were very large. Conclusions: Opportunistic HU assessment from routine CT provides a rapid, reproducible surrogate of bone density that distinguishes SIF with near-perfect accuracy and identifies osteoporosis. HU thresholds around ~96–98 are consistent with osteoporotic ranges and can be implemented to trigger metabolic evaluation and early osteoanabolic therapy where appropriate.


  • Open Access

    Osteoporosis Assessment Using Bone Density Measurement in Hounsfield Units in the Femoral Native CT Cross-Section: A Comparison with Computed Tomography X-Ray Absorptiometry of the Hip

    by Julian Ramin Andresen, Guido Schröder, Thomas Haider, Hans-Christof Schober, Reimer Andresen

    Background/Objectives: Bone mineral density (BMD) loss leads to osteoporosis, significantly increasing fracture risk in both the axial and peripheral skeleton. The extent to which it is possible to estimate the degree of osteoporosis in the hip by determining the density in Hounsfield Unit (HU) measurements derived from computed tomography (CT) scans and to calculate quantitative BMD and T values from the HU values should be examined. Methods: A total of 240 patients (mean age: 64.9 ± 13.1 years, BMI: 26.8 ± 6.8 kg/m2) underwent CT-based BMD assessments using CTXA-Hip. Subregions of the proximal femur, including the femoral head, femoral neck, and intertrochanteric region, were analyzed for cancellous density in HUs using circular and irregular region-of-interest (ROI) measurements. Correlations between HU values and DEXA-equivalent BMD (mg/cm2) and T values were computed. Predictive power for osteoporosis was evaluated using ROC curve analysis. Results: Cancellous bone density in the proximal femur showed a significant decline with increasing age and decreasing BMI (p < 0.05). The median BMD for the entire hip was 0.684 mg/cm2, and the median HU value for the proximal femur was 123.15. Strong correlations were observed between HU values and BMD (R2 = 0.904, p < 0.001) and T values (R2 = 0.911, p < 0.001). A T value of −2.5 corresponded to an HU value of 95.79 in the entire femur. ROC analysis demonstrated high sensitivity (0.92) and specificity (0.93) for HU-based osteoporosis prediction. Conclusions: HU measurements provide a reliable method for estimating BMD and T values in the proximal femur, offering a valuable diagnostic tool for osteoporosis. The highest predictive accuracy was achieved when using an irregular ROI from the entire proximal femoral region.


  • Open Access

    Opportunistic Osteoporosis Assessment and Fracture Risk Determination Using Cancellous Density Measurement in Hounsfield Units of Native Lumbar Computed Tomography Images—A Comparative Study with Conventional Bone Density Evaluation

    by Julian Ramin Andresen, Guido Schröder, Thomas Haider, Reimer Andresen

    Background/Objectives: Osteoporosis is a global problem that will increase as the population increases and ages, requiring prevention, early detection, and appropriate treatment. An increasing loss in bone mineral density (BMD) is the hallmark of osteoporosis, leading to an increased risk for insufficiency fractures. We aimed to investigate and analyze the applicability of native lumbar spine computed tomography (CT) scans for the evaluation of bone density compared with standard bone density measurements with quantitative computed tomography (QCT) and computed tomography X-ray absorptiometry of the hip (CTXA). Methods: Patients who were referred to our institution for diagnostic investigations and underwent CT imaging of the lumbar spine, as well as standard osteoporosis assessments including QCT and CTXA, were included in the study, resulting in a total of 240 patients (mean age: 65.9 years, range: 24–91). An ANOVA test was used to compare patient groups without a fracture, with one fracture, with more than one fracture, and with additional sacral fractures. An ROC analysis was performed to assess the predictive power of fracture risk estimation considering HU, QCT, and CTXA values. Results: At least one fracture was detected in 42.9% of these patients. For the lumbar spine, the median HU was 89.9 (range 67.9–126.9) and the median BMD was 73.7 (range 57.1–104.2) mg/cm3. With a correlation coefficient of 0.98 (p < 0.001), the HU values obtained from native lumbar CT scans can be calculated using the following formula: BMDspine = 0.84 + (0.81 × HU). With HU values < 80 and a BMD of the lumbar spine < 66 mg/cm3, a significantly increased number of osteoporotic vertebral fractures were found in the mid-thoracic, thoracolumbar, and sacral regions with an effect size of 0.89. In 32 patients (13.3%), additional sacral fractures were found; these patients showed the lowest density values with a median HU value of 31.8 (12.7–58.2). An ROC analysis of HU revealed a 93% sensitivity for the coincidence of a vertebral fracture. There was no significant difference compared with the AUC of QCT (p = 0.395) for concomitant vertebral body fractures. CTXA values also allowed for risk assessment but showed a significantly lower AUC. We found a negative correlation of BMD with age and a positive correlation of BMD with body mass index. Conclusions: Cancellous density measurements in HU values can be effectively converted into quantitative BMD values in mg/cm3, enabling a reliable assessment of osteoporosis severity and fracture risk prediction. Further quantitative density evaluation of the hip does not add value to fracture risk assessment for the axial skeleton. Based on this study’s findings, using HU values in native CT of the lumbar spine alone offers a viable, opportunistic approach towards fracture risk evaluation of the spine.


  • Open Access

    Evaluation of Cancellous Bone Density from C3 to L5 in 11 Body Donors: CT Versus Micro-CT Measurements

    by Guido Schröder, Estelle Akl, Justus Hillebrand, Andreas Götz, Thomas Mittlmeier, Steffi S. I. Falk, Laura Hiepe, Julian Ramin Andresen, Reimer Andresen, Dirk Flachsmeyer-Blank, et al.

    Introduction: Comparative studies on Hounsfield units (HU) and bone volume fraction (BVF%) for the demonstration of cancellous bone density in the entire spine and in the various intravertebral regions are rare. The aim of the present study was to determine HU in various segments and sectional planes (sagittal, axial, coronary) of the spine and their description in the context of bone density measurement on micro-CT, as well as the significance of the values for bone loss and fracture risk. Materials/Methods: The spines of 11 body donors were analyzed by means of high-resolution spiral CT and micro-CT. Vertebral deformities were identified on sagittal reformations and classified. Cancellous bone density in the individual vertebrae from C3 to L5, expressed in HU, was measured on CT images (in all 242 vertebral bodies). For this purpose, a manually positioned ROI was established in mid-vertebral cancellous bone in the axial, sagittal, and coronary planes. Using a Jamshidi® needle, we obtained 726 specimens from prepared vertebrae extracted from three quadrants (QI: right-sided edge, QII: central, QIII: left-sided edge) and analyzed these on a micro-CT device (SKYSCAN 1172, RJL Micro & Analytic GmbH, Germany). The study design with multiple measurements was reflected by a General Linear Model Repeated Measures. The model was adjusted to the bone density values of both procedures (HU, BVF%) in the viewed sectional planes and quadrants for 22 vertebrae, with the predictors gender and fracture status, controlled for age and body mass index (BMI). Analysis of variance provided estimations of density values and comparisons of several subgroups. Results: All spines were osteoporotic. Both procedures revealed a significant reduction in cancellous bone density from C3 to L5 (p ≤ 0.018). Gender (p = 0.002) and fracture status (p = 0.001) have an impact on bone density: men have higher bone density values than women; cases with fewer fractures also have higher bone density values. CT revealed both effects (p = 0.002 for each) with greater clarity. HU on CT measurements in the axial plane showed higher density values than in the sagittal or coronary planes. CT measurement profiles along the spine as well as along the individual profiles of the 11 body donors were independent of the measured quadrants, but the micro-CT measurements were not. Discussion: The craniocaudal reduction in bone density was demonstrated in different degrees of clarity by the two procedures. Likewise, the procedure-related visualization of differences in cancellous bone density between genders, fracture groups, sectional planes, and quadrants indicates the need for a better understanding of the advantages of each procedure for patient-oriented approaches to the diagnosis of osteoporosis. Future research should be focused on the determination of standard values and their clinical application for the prevention and treatment of osteoporosis.


  • Open Access

    Biomechanical Analysis of Diffuse Idiopathic Skeletal Hyperostosis and Osteoporosis: Vertebral Fracture Risk Evaluation Using Finite Element Modeling with Clinical and Micro-CT Data in an Elderly Donor

    by Guido Schröder, Thomas Mittlmeier, Steffi S. I. Falk, Andreas Götz, Josephine Kruse, Estelle Akl, Hannes Kröger, Julian Ramin Andresen, Reimer Andresen, Hans-Christof Schober, et al.

    Introduction: Biomechanical analysis of spinal structures is crucial in the evaluation of injuries, the risk of fracture, and age-related changes. Osteoporotic vertebrae are very fragile and therefore constitute a serious risk, especially in the elderly. Methods: At present, clinically relevant decision making in fracture risk assessment is predicated upon finite element analysis (FEA), which utilizes high-resolution computed tomography (CT) scans from clinical practice alongside micro-CT scans from laboratory settings. Of particular interest is the utilization of cortical vertebral body thicknesses, as meticulously measured via micro-CT. The data from a body donation over 80 years old with diffuse idiopathic skeletal hyperostosis (DISH) and osteoporosis (OP) were utilized through FEA to evaluate stresses in cortical and trabecular bone and to predict the stiffness and deformability of the examined vertebral bodies. Results: The investigation revealed a higher density of cortical and cancellous bone in vertebrae affected by DISH. Cortical density was highest in the thoracic section (median 188 µm), while cancellous bone density was 222 HU in the cervical vertebrae. The load on cortical bone increased as we progressed towards the lumbar spine; however, it remained quite constant in cancellous bone. Despite a low bone density, we registered no fractures in vertebrae. Conclusions: The data showed that DISH increased the thickness of the cortical bone and the density of the cancellous bone. The combination of increased cortical and cancellous bone density might reduce the risk of fracture in patients with low bone density. These conclusions emphasize the significance of biomechanical properties in the assessment of fracture risk and have important implications for clinical practice, particularly in relation to the prevention of vertebral fractures in osteoporotic patients with DISH.


  • Open Access

    Regional Variations in the Intra- and Intervertebral Trabecular Microarchitecture of the Osteoporotic Axial Skeleton with Reference to the Direction of Puncture

    by Guido Schröder, Thomas Mittlmeier, Patrick Gahr, Sahra Ulusoy, Laura Hiepe, Marko Schulze, Andreas Götz, Reimer Andresen, Hans-Christof Schober

    Background: Trabeculae in vertebral bodies are unequally distributed within the cervical spine (CS), the thoracic spine (TS), and lumbar spine (LS). Such structures are also unequally distributed within the individual vertebrae. Exact knowledge of the microstructure of these entities could impact our understanding and treatment of fractures caused by osteoporosis and possibly improve surgical approaches. Appropriate investigations could help clarify the pathomechanisms of different forms of osteoporotic vertebral fractures, as well as different changes in morphological findings like the trabecular bone score (TBS). In the present study, we applied punctures to the craniocaudal and ventrocaudal directions and obtained cylinders of cancellous bone from the central portions and marginal regions of cervical vertebrae 5 and 6, thoracic vertebrae 8 and 12, and lumbar vertebrae 1 and 3. We systematically analyzed these samples to determine the bone volume fraction, trabecular thickness, separation, connectivity density, degree of anisotropy, and structure model index. Methods: Using an 8-gauge Jamshidi needle, we obtained samples from three quadrants (Q I: right margin; Q II: central; Q III: left margin) in the frontal and transverse plane and prepared these samples with a moist cloth in a 1.5 mL Eppendorf reaction vessel. The investigations were performed on a micro-CT device (SKYSCAN 1172, RJL Micro & Analytic Company, Karlsdorf-Neuthard, Germany). All collected data were analyzed using the statistical software package SPSS (version 24.0, IBM Corp., Armonk, NY, USA). Student’s t test, the Wilcoxon–Mann–Whitney test, the Chi-squared test, and univariate analysis were used for between-group comparisons. The selection of the test depended on the number of investigated groups and the result of the Shapiro–Wilk test of normal distribution. In the case of statistically significant results, a post hoc LSD test was performed. Results: In total, we obtained 360 bone samples from 20 body donors. The craniocaudal puncture yielded data of similar magnitudes for all investigated parameters in all three quadrants, with the highest values observed in the CS. Comparisons of the ventrodorsal and craniocaudal microstructure revealed a significantly lower trabecular density and a significantly higher degree of anisotropy in the craniocaudal direction. Conclusions: The results presented different distributions and behaviors of trabecular density, with lower density in the mid-vertebral region over the entire breadth of the vertebrae. Reduced trabecular density caused a higher degree of anisotropy and was, therefore, associated with a lower capacity to sustain biomechanical loads. Fractures in fish vertebrae were easily explained by this phenomenon. The different changes in these structures could be responsible, in part, for the changes in the TBS determined using dual-energy X-ray absorptiometry. These results confirm the clinical relevance of the TBS.