Elena A. Sulyanova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Elena A. Sulyanova has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
B. P. Sobolev
Shubnikov Institute of Crystallography of the Kurchatov Complex of Crystallography and Photonics of the National Research Centre “Kurchatov Institute”, Moscow, Russia
14 shared publications- Boris P. Sobolev
Shubnikov Institute of Crystallography, Federal Scientific Research Centre “Crystallography and Photonics”, Russian Academy of Sciences, Leninskiy Prospekt 59, 119333 Moscow, Russia
11 shared publications - Denis N. Karimov
Shubnikov Institute of Crystallography, Kurchatov Complex of Crystallography and Photonics, National Research Centre “Kurchatov Institute”, Moscow, Russia
9 shared publications A. S. Avilov
Shubnikov Institute of Crystallography of the Kurchatov Complex of Crystallography and Photonics of the National Research Centre “Kurchatov Institute”, Moscow, Russia
5 shared publicationsV. I. Nikolaichik
Institute of Microelectronics Technology Problems and High Purity Materials, Russian Academy of Sciences, Chernogolovka, Russia
5 shared publicationsI. A. Verin
Shubnikov Institute of Crystallography, Federal Scientific Research Centre “Crystallography and Photonics,” Russian Academy of Sciences
3 shared publications
Latest Publications
- 1 August 2026
- Published by Pleiades Publishing Ltd in Crystallography Reports
- Vol. 71 (4) , 587-600
Structural Aspects of the Huge Isomorphic Capacity of the Fluorite Structure in Relation to Cations of Rare Earth Elements
Classifying isomorphism, V.M. Goldschmidt (1926) distinguished a aliovalent “space-filling isomorphism”. The example was the mineral yttrofluorite \({\text{C}}{{{\text{a}}}_{{1--x}}}{{{\text{Y}}}_{x}}{{{\text{F}}}_{{2 + x}}}\) (1911). For its unexplored structure, a model of filling cubic voids of the CaF2 structure with superstoichiometric F1– located in their centers has been proposed. The model has been repeatedly confirmed by density measurements. In crystals Ca0.607Ce0.393F2.393 (1969) and Ca0.9Y0.1F2.1 (1970) studied by methods of structural analysis, the centers of cubic voids of the structure are not filled. The \({{M}_{{1--x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}\) studied so far has been classified according to the defect of the anionic motif. The modern model of the defective structure of \({{M}_{{1--x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}\) (M = Ca, Sr, Ba, Cd; R = Y, La–Lu) is based on octa-cubic clusters [\({{M}_{{14--n}}}{{R}_{n}}{{{\text{F}}}_{{64 + n}}}\)] (n ≤ 14). Cluster types were distinguished by interstitial anions F(32f)3 and F(48i). A new approach to the \({{M}_{{1--x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}\) defective structure is proposed. It assigns the role of the root cause of aliovalent “space-filling isomorphism” to R3+ cations. Without them, neither this type of isomorphism nor the formation of clusters is possible. The evolution of the cluster structure along the \({{M}_{{1--x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}\) series is determined by the lanthanide contraction of 14 R = Ce–Lu with a 4f subshell, which affects the R3+ ionic radii.- 1 August 2026
- Published by Pleiades Publishing Ltd in Crystallography Reports
- Vol. 71 (4) , 587-600
Structural Aspects of the Huge Isomorphic Capacity of the Fluorite Structure in Relation to Cations of Rare Earth Elements
Classifying isomorphism, V.M. Goldschmidt (1926) distinguished a aliovalent “space-filling isomorphism”. The example was the mineral yttrofluorite \({\text{C}}{{{\text{a}}}_{{1--x}}}{{{\text{Y}}}_{x}}{{{\text{F}}}_{{2 + x}}}\) (1911). For its unexplored structure, a model of filling cubic voids of the CaF2 structure with superstoichiometric F1– located in their centers has been proposed. The model has been repeatedly confirmed by density measurements. In crystals Ca0.607Ce0.393F2.393 (1969) and Ca0.9Y0.1F2.1 (1970) studied by methods of structural analysis, the centers of cubic voids of the structure are not filled. The \({{M}_{{1--x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}\) studied so far has been classified according to the defect of the anionic motif. The modern model of the defective structure of \({{M}_{{1--x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}\) (M = Ca, Sr, Ba, Cd; R = Y, La–Lu) is based on octa-cubic clusters [\({{M}_{{14--n}}}{{R}_{n}}{{{\text{F}}}_{{64 + n}}}\)] (n ≤ 14). Cluster types were distinguished by interstitial anions F(32f)3 and F(48i). A new approach to the \({{M}_{{1--x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}\) defective structure is proposed. It assigns the role of the root cause of aliovalent “space-filling isomorphism” to R3+ cations. Without them, neither this type of isomorphism nor the formation of clusters is possible. The evolution of the cluster structure along the \({{M}_{{1--x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}\) series is determined by the lanthanide contraction of 14 R = Ce–Lu with a 4f subshell, which affects the R3+ ionic radii.- 25 December 2025
- Published by Pleiades Publishing Ltd in Crystallography Reports
- Vol. 70 (6) , 917-927
Evolution of the Cluster Structure of Fluorite Nonstoichiometric Crystals of the Homologous Series ${\text{C}}{{{\text{a}}}_{{1-x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}$ (R = Sc, Y, La–Lu) in the Composition–Temperature SystemThe unified model of the cluster structure of nanostructured fluorite crystals in the temperature–composition (T–x) system, proposed by the authors, was used to clarify the evolution of the cluster structure of crystals of the homologous series \({\text{C}}{{{\text{a}}}_{{1-x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}\) (R = La–Lu, Y). The defect structures of Ca0.75Nd0.25F2.25, Ca0.80Tb0.20F2.20, and Ca0.75Y0.25F2.25 were studied by X-ray diffraction analysis at 293 and 85 K. They are based on octa-cubic clusters with cuboctahedron cores {F12}. The cores are formed by interstitial anions at the positions 32f (f-type clusters in Ca0.75Nd0.25F2.25 and Ca0.80Tb0.20F2.20) and 48i (i-type clusters in Ca0.75Y0.25F2.25). Obtaining diffraction data with a resolution of 0.29 Å made it possible to identify cation displacements at the positions 24e and 32f in Ca0.75Y0.25F2.25 and clarify the occupancies of these positions. Lowering the temperature from 293 to 85 K does not change the cluster structure of Ca0.75Nd0.25F2.25, Ca0.80Tb0.20F2.20, and Ca0.75Y0.25F2.25. An electron diffraction study of the Ca0.75Nd0.25F2.25 crystal revealed (for the first time) diffuse scattering from structural defects with sizes on the order of one unit cell in crystals of the homologous series \({\text{C}}{{{\text{a}}}_{{1-x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}\).- 25 December 2025
- Published by Pleiades Publishing Ltd in Crystallography Reports
- Vol. 70 (6) , 917-927
Evolution of the Cluster Structure of Fluorite Nonstoichiometric Crystals of the Homologous Series ${\text{C}}{{{\text{a}}}_{{1-x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}$ (R = Sc, Y, La–Lu) in the Composition–Temperature SystemThe unified model of the cluster structure of nanostructured fluorite crystals in the temperature–composition (T–x) system, proposed by the authors, was used to clarify the evolution of the cluster structure of crystals of the homologous series \({\text{C}}{{{\text{a}}}_{{1-x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}\) (R = La–Lu, Y). The defect structures of Ca0.75Nd0.25F2.25, Ca0.80Tb0.20F2.20, and Ca0.75Y0.25F2.25 were studied by X-ray diffraction analysis at 293 and 85 K. They are based on octa-cubic clusters with cuboctahedron cores {F12}. The cores are formed by interstitial anions at the positions 32f (f-type clusters in Ca0.75Nd0.25F2.25 and Ca0.80Tb0.20F2.20) and 48i (i-type clusters in Ca0.75Y0.25F2.25). Obtaining diffraction data with a resolution of 0.29 Å made it possible to identify cation displacements at the positions 24e and 32f in Ca0.75Y0.25F2.25 and clarify the occupancies of these positions. Lowering the temperature from 293 to 85 K does not change the cluster structure of Ca0.75Nd0.25F2.25, Ca0.80Tb0.20F2.20, and Ca0.75Y0.25F2.25. An electron diffraction study of the Ca0.75Nd0.25F2.25 crystal revealed (for the first time) diffuse scattering from structural defects with sizes on the order of one unit cell in crystals of the homologous series \({\text{C}}{{{\text{a}}}_{{1-x}}}{{R}_{x}}{{{\text{F}}}_{{2 + x}}}\).- 5 December 2024
- Published by The Russian Academy of Sciences in Kristallografiâ
- Vol. 69 (6) , 938-953
Defect crystal structure of α-Na0.5–xR0.5+xF2+2x (R = Dy–Lu, Y) on X-Ray and electron diffraction data. II. Defect structure of the α-Na0.4R0.6F2.2 (R = Ho–Lu, Y) nanostructured crystals
The α-Na0.4R0.6F2.2 crystals (R = Ho–Lu, Y) were studied by X-ray diffraction analysis at 293 and 85 K. A unified cluster model of nanostructured crystals with a fluorite-type structure based on the polymorphism of KR3F10 (R = Er, Yb) was used to model their defect structure. The α-Na0.4R0.6F2.2 matrix component contained Na+ and R3+ in a ratio of 1 : 1. Part of the matrix anions was shifted from 8c to 32f position (sp. gr. Fm3m). Excess R3+ cations formed with Na+ octa-cubic clusters with nuclei in the form of cuboctahedra {F12} formed by interstitial anions at the 48i position. The α-Na0.4R0.6F2.2 cluster component was formed by octa-cubic clusters of type i. The electron diffraction method showed that the clusters had the shape of plates about 5 nm thick with superstructural ordering. Their structural model based on the K0.265Gd0.735F2.47 structure was proposed. For the first time, experimental confirmation of the affiliation of α-Na0.5–xR0.5+xF2+2x to nanostructured crystals was obtained by electron diffraction. When the temperature decreases from 293 to 85 K, the type of cluster component of the defect α-Na0.4R0.6F2.2 structure with R = Ho–Lu, and Y was not change. At 293 K, the boundary of the type change of the defect structure in the α-Na0.5–xR0.5+xF2+2x series was located between R = Dy (with the Z = 66 atomic number) and Ho (with Z = 67). When the temperature drops from 293 to 85 K, the position of the boundary was not change.
- 5 December 2024
- Published by The Russian Academy of Sciences in Kristallografiâ
- Vol. 69 (6) , 938-953
Defect crystal structure of α-Na0.5–xR0.5+xF2+2x (R = Dy–Lu, Y) on X-Ray and electron diffraction data. II. Defect structure of the α-Na0.4R0.6F2.2 (R = Ho–Lu, Y) nanostructured crystals
The α-Na0.4R0.6F2.2 crystals (R = Ho–Lu, Y) were studied by X-ray diffraction analysis at 293 and 85 K. A unified cluster model of nanostructured crystals with a fluorite-type structure based on the polymorphism of KR3F10 (R = Er, Yb) was used to model their defect structure. The α-Na0.4R0.6F2.2 matrix component contained Na+ and R3+ in a ratio of 1 : 1. Part of the matrix anions was shifted from 8c to 32f position (sp. gr. Fm3m). Excess R3+ cations formed with Na+ octa-cubic clusters with nuclei in the form of cuboctahedra {F12} formed by interstitial anions at the 48i position. The α-Na0.4R0.6F2.2 cluster component was formed by octa-cubic clusters of type i. The electron diffraction method showed that the clusters had the shape of plates about 5 nm thick with superstructural ordering. Their structural model based on the K0.265Gd0.735F2.47 structure was proposed. For the first time, experimental confirmation of the affiliation of α-Na0.5–xR0.5+xF2+2x to nanostructured crystals was obtained by electron diffraction. When the temperature decreases from 293 to 85 K, the type of cluster component of the defect α-Na0.4R0.6F2.2 structure with R = Ho–Lu, and Y was not change. At 293 K, the boundary of the type change of the defect structure in the α-Na0.5–xR0.5+xF2+2x series was located between R = Dy (with the Z = 66 atomic number) and Ho (with Z = 67). When the temperature drops from 293 to 85 K, the position of the boundary was not change.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Crystallography Reports
- Vol. 69 (6) , 804-818
Defect Crystal Structure of $\alpha {\text{-N}}{{{\text{a}}}_{{0.5-x}}}{{R}_{{0.5 + x}}}{{{\text{F}}}_{{2 + 2x}}}$ (R = Dy–Lu, Y) According to X-ray and Electron Diffraction Data. II: Defect Structure of the α-Na0.4R0.6F2.2 (R = Ho–Lu, Y) Nanostructured CrystalsThe α-Na0.4R0.6F2.2 crystals (R = Ho–Lu, Y) have been studied by X-ray diffraction analysis at 293 and 85 K. A unified cluster model of nanostructured crystals with a fluorite-type structure, based on the polymorphism of KR3F10 (R = Er, Yb), was used to model their defect structure. The α-Na0.4R0.6F2.2 matrix component contains Na+ and R3+ ions in a ratio of 1 : 1. Part of the matrix anions are shifted from the 8c to 32f site (sp. gr. \(Fm\bar {3}m\)). Excess R3+ cations form, jointly with Na+, octa-cubic clusters with cores in the form of cuboctahedra {F12}, consisting of interstitial anions at the 48i site. The α-Na0.4R0.6F2.2 cluster component is formed by octa-cubic clusters of type i. The electron diffraction study showed that the clusters are shaped as plates about 5 nm thick with superstructural ordering. Their structural model based on the K0.265Gd0.735F2.47 structure was proposed. Experimental confirmation of the affiliation of \(\alpha {\text{-N}}{{{\text{a}}}_{{0.5-x}}}{{R}_{{0.5 + x}}}{{{\text{F}}}_{{2 + 2x}}}\) to nanostructured crystals was obtained for the first time by electron diffraction. When temperature decreases from 293 to 85 K, the type of the cluster component of the defect α-Na0.4R0.6F2.2 structure with R = Ho–Lu, Y does not change. At 293 K, the boundary of the change in the defect structure type in the \(\alpha {\text{-N}}{{{\text{a}}}_{{0.5-x}}}{{R}_{{0.5 + x}}}{{{\text{F}}}_{{2 + 2x}}}\) series is located between R = Dy (Z = 66) and Ho (Z = 67). With a decrease in temperature from 293 to 85 K the position of the boundary does not change.- 1 December 2024
- Published by Pleiades Publishing Ltd in Crystallography Reports
- Vol. 69 (6) , 804-818
Defect Crystal Structure of $\alpha {\text{-N}}{{{\text{a}}}_{{0.5-x}}}{{R}_{{0.5 + x}}}{{{\text{F}}}_{{2 + 2x}}}$ (R = Dy–Lu, Y) According to X-ray and Electron Diffraction Data. II: Defect Structure of the α-Na0.4R0.6F2.2 (R = Ho–Lu, Y) Nanostructured CrystalsThe α-Na0.4R0.6F2.2 crystals (R = Ho–Lu, Y) have been studied by X-ray diffraction analysis at 293 and 85 K. A unified cluster model of nanostructured crystals with a fluorite-type structure, based on the polymorphism of KR3F10 (R = Er, Yb), was used to model their defect structure. The α-Na0.4R0.6F2.2 matrix component contains Na+ and R3+ ions in a ratio of 1 : 1. Part of the matrix anions are shifted from the 8c to 32f site (sp. gr. \(Fm\bar {3}m\)). Excess R3+ cations form, jointly with Na+, octa-cubic clusters with cores in the form of cuboctahedra {F12}, consisting of interstitial anions at the 48i site. The α-Na0.4R0.6F2.2 cluster component is formed by octa-cubic clusters of type i. The electron diffraction study showed that the clusters are shaped as plates about 5 nm thick with superstructural ordering. Their structural model based on the K0.265Gd0.735F2.47 structure was proposed. Experimental confirmation of the affiliation of \(\alpha {\text{-N}}{{{\text{a}}}_{{0.5-x}}}{{R}_{{0.5 + x}}}{{{\text{F}}}_{{2 + 2x}}}\) to nanostructured crystals was obtained for the first time by electron diffraction. When temperature decreases from 293 to 85 K, the type of the cluster component of the defect α-Na0.4R0.6F2.2 structure with R = Ho–Lu, Y does not change. At 293 K, the boundary of the change in the defect structure type in the \(\alpha {\text{-N}}{{{\text{a}}}_{{0.5-x}}}{{R}_{{0.5 + x}}}{{{\text{F}}}_{{2 + 2x}}}\) series is located between R = Dy (Z = 66) and Ho (Z = 67). With a decrease in temperature from 293 to 85 K the position of the boundary does not change.- 23 October 2024
- Published by The Russian Academy of Sciences in Kristallografiâ
- Vol. 69 (5) , 771-786
Defect crystal structure of α-Na0.5-xR0.5+xF2+2x (R = Dy-Lu, Y) on X-Ray and electron diffraction data. I. MethoD of Defect structure modelling on the α-Na0.35Dy0.65F2.30 example
For the first time, the crystal α-Na0.35Dy0.65F2.30 was studied using X-ray diffraction at 293 K and 85 K and electron diffraction at 293 K. A unified cluster model of the defective structure of nanostructured crystals with a fluorite-type structure, based on the polymorphism of ordered phases KR3F10 (R = Er, Yb), was expanded with a matrix part model based on the structure of the KYF4 compound. The unified cluster model was applied to construct the defective structure of α-Na0.35Dy0.65F2.30. It was found that the matrix part of the crystal contains Na+ и Dy3+ cations in a 1:1 ratio. Some of the anions in the matrix are displaced to the 32f positions (space group Fm3m). The excess Dy3+ forms octahedral-cubic clusters with Na+ [Na14–nDynF64+n] with cores in the form of distorted and regular cuboctahedrons {F12}. These are composed of interstitial anions in two 32f positions and one 48i position. The cluster component of the α-Na0.35Dy0.65F2.30 crystal contains octahedral-cubic clusters of f-, f–i- and i-types. Electron diffraction showed that α-Na0.35Dy0.65F2.30 is a nanostructured crystal. Its cluster component is in the form of plate-like inclusions about 5 nm thick with superstructural ordering and individual octahedral-cubic clusters. A model of their structure was proposed. Lowering the temperature to 85 K increases the number of interstitial F(32f)1 anions in the matrix component of the crystal.
- 23 October 2024
- Published by The Russian Academy of Sciences in Kristallografiâ
- Vol. 69 (5) , 771-786
Defect crystal structure of α-Na0.5-xR0.5+xF2+2x (R = Dy-Lu, Y) on X-Ray and electron diffraction data. I. MethoD of Defect structure modelling on the α-Na0.35Dy0.65F2.30 example
For the first time, the crystal α-Na0.35Dy0.65F2.30 was studied using X-ray diffraction at 293 K and 85 K and electron diffraction at 293 K. A unified cluster model of the defective structure of nanostructured crystals with a fluorite-type structure, based on the polymorphism of ordered phases KR3F10 (R = Er, Yb), was expanded with a matrix part model based on the structure of the KYF4 compound. The unified cluster model was applied to construct the defective structure of α-Na0.35Dy0.65F2.30. It was found that the matrix part of the crystal contains Na+ и Dy3+ cations in a 1:1 ratio. Some of the anions in the matrix are displaced to the 32f positions (space group Fm3m). The excess Dy3+ forms octahedral-cubic clusters with Na+ [Na14–nDynF64+n] with cores in the form of distorted and regular cuboctahedrons {F12}. These are composed of interstitial anions in two 32f positions and one 48i position. The cluster component of the α-Na0.35Dy0.65F2.30 crystal contains octahedral-cubic clusters of f-, f–i- and i-types. Electron diffraction showed that α-Na0.35Dy0.65F2.30 is a nanostructured crystal. Its cluster component is in the form of plate-like inclusions about 5 nm thick with superstructural ordering and individual octahedral-cubic clusters. A model of their structure was proposed. Lowering the temperature to 85 K increases the number of interstitial F(32f)1 anions in the matrix component of the crystal.
- 1 October 2024
- Published by Pleiades Publishing Ltd in Crystallography Reports
- Vol. 69 (5) , 645-659
Defect Crystal Structure of α-Na0.5–xR0.5+xF2+2x (R = Dy–Lu, Y) According to X-ray and Electron Diffraction Data: 1. The Method of Defect Structure Modeling on the Example of α-Na0.35Dy0.65F2.30
The α-Na0.35Dy0.65F2.30 crystal has been investigated for the first time by X-ray diffraction at 293 and 85 K and by electron diffraction at 293 K. The unified cluster model of the defect structure of fluorite-type nanostructured crystals, based on the polymorphism of ordered KR3F10 phases (R = Er, Yb), is extended by the matrix part model based on the KYF4 structure. The unified cluster model is applied to construct the defect structure of α-Na0.35Dy0.65F2.30. The matrix part of the crystal is found to contain Na+ and Dy3+ cations in a ratio of 1 : 1. Some of matrix anions are displaced to 32f sites (sp. gr. Fm\(\bar {3}\)m). Excess Dy3+ cations and Na+ cations form octa-cubic clusters [\({\text{N}}{{{\text{a}}}_{{14-n}}}{\text{D}}{{{\text{y}}}_{n}}{{{\text{F}}}_{{64 + n}}}\)] with cores in the form of distorted and regular {F12} cuboctahedra. They are composed by interstitial anions at two 32f sites and one 48i site. The cluster component of the α-Na0.35Dy0.65F2.30 crystal contains octa-cubic clusters of the f, f–i, and i types. The electron diffraction study revealed that α-Na0.35Dy0.65F2.30 is a nanostructured crystal. Its cluster component includes platelike precipitates ~5 nm thick with superstructural ordering and unit octa-cubic clusters. A model is proposed for their structure. A decrease in the temperature to 85 K increases the number of interstitial F(32f)1 anions in the matrix component of the crystal.- 1 October 2024
- Published by Pleiades Publishing Ltd in Crystallography Reports
- Vol. 69 (5) , 645-659
Defect Crystal Structure of α-Na0.5–xR0.5+xF2+2x (R = Dy–Lu, Y) According to X-ray and Electron Diffraction Data: 1. The Method of Defect Structure Modeling on the Example of α-Na0.35Dy0.65F2.30
The α-Na0.35Dy0.65F2.30 crystal has been investigated for the first time by X-ray diffraction at 293 and 85 K and by electron diffraction at 293 K. The unified cluster model of the defect structure of fluorite-type nanostructured crystals, based on the polymorphism of ordered KR3F10 phases (R = Er, Yb), is extended by the matrix part model based on the KYF4 structure. The unified cluster model is applied to construct the defect structure of α-Na0.35Dy0.65F2.30. The matrix part of the crystal is found to contain Na+ and Dy3+ cations in a ratio of 1 : 1. Some of matrix anions are displaced to 32f sites (sp. gr. Fm\(\bar {3}\)m). Excess Dy3+ cations and Na+ cations form octa-cubic clusters [\({\text{N}}{{{\text{a}}}_{{14-n}}}{\text{D}}{{{\text{y}}}_{n}}{{{\text{F}}}_{{64 + n}}}\)] with cores in the form of distorted and regular {F12} cuboctahedra. They are composed by interstitial anions at two 32f sites and one 48i site. The cluster component of the α-Na0.35Dy0.65F2.30 crystal contains octa-cubic clusters of the f, f–i, and i types. The electron diffraction study revealed that α-Na0.35Dy0.65F2.30 is a nanostructured crystal. Its cluster component includes platelike precipitates ~5 nm thick with superstructural ordering and unit octa-cubic clusters. A model is proposed for their structure. A decrease in the temperature to 85 K increases the number of interstitial F(32f)1 anions in the matrix component of the crystal.- 26 February 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 128 (10) , 4200-4207
Application of KR3F10 (R = Gd–Lu and Y) Polymorphism for Modeling the Defect Structure of Nonstoichiometric Multicomponent Fluorite-Type Crystals in T-x Systems
- 26 February 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 128 (10) , 4200-4207
Application of KR3F10 (R = Gd–Lu and Y) Polymorphism for Modeling the Defect Structure of Nonstoichiometric Multicomponent Fluorite-Type Crystals in T-x Systems
- 15 January 2024
- Published by The Russian Academy of Sciences in Defektoskopiâ
- No. 1,p. 28-39
Study of additive manufacturing products using neutron imaging
The article presents the results of studies of additively manufactured metal samples using neutron imaging at the IR-8 research reactor of the National Research Center “Kurchatov Institute” (NRC KI). The advantages and disadvantages of neutron imaging using monochromatic (DRAGON station) and polychromatic (PONI tomograph) neutrons when studying internal structure of the samples are demonstrated.
- 15 January 2024
- Published by The Russian Academy of Sciences in Defektoskopiâ
- No. 1,p. 28-39
Study of additive manufacturing products using neutron imaging
The article presents the results of studies of additively manufactured metal samples using neutron imaging at the IR-8 research reactor of the National Research Center “Kurchatov Institute” (NRC KI). The advantages and disadvantages of neutron imaging using monochromatic (DRAGON station) and polychromatic (PONI tomograph) neutrons when studying internal structure of the samples are demonstrated.
- 1 January 2024
- Published by Pleiades Publishing Ltd in Russian Journal of Nondestructive Testing
- Vol. 60 (1) , 35-45
Study of Additive Manufacturing Products Using Neutron Imaging
The paper presents the results of studies of additively manufactured metal samples using neutron imaging at the IR-8 research reactor of the National Research Center “Kurchatov Institute” (NRC KI). The advantages and disadvantages of neutron imaging using monochromatic (DRAGON station) and polychromatic (PONY tomograph) neutrons when studying internal structure of the samples are demonstrated.
- 1 January 2024
- Published by Pleiades Publishing Ltd in Russian Journal of Nondestructive Testing
- Vol. 60 (1) , 35-45
Study of Additive Manufacturing Products Using Neutron Imaging
The paper presents the results of studies of additively manufactured metal samples using neutron imaging at the IR-8 research reactor of the National Research Center “Kurchatov Institute” (NRC KI). The advantages and disadvantages of neutron imaging using monochromatic (DRAGON station) and polychromatic (PONY tomograph) neutrons when studying internal structure of the samples are demonstrated.
- Open Access
- 3 December 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (23) , 17080
Lanthanide Contraction in LnF3 (Ln = Ce-Lu) and Its Chemical and Structural Consequences: Part 2: Specialized Empirical System of R3+ (R = Y, La, and 14 Ln) and F1− Ionic Radii for RF3 Series
A specialized empirical (Spec-zd Emp) system of ionic radii (SIR) for R = Y3+, La3+, Ln3+, and F1− (R rare earth elements (REE)) was derived from the dependence of lanthanide contraction (LC) on the atomic number (Z) of lanthanides (Ln). LC decreased the radius of the cation with increasing Z. The structures of t-RF3 (LaF3-NdF3, “pseudo t-SmF3”) of the LaF3 type, 11 β-LnF3 (Ln = Sm-Lu), and β-YF3 of the β-YF3 type were studied. The empirical basis of the shortest (F-F)min and (R-F)min distances was calculated from the structural data for the RF3 complete series. The dependence of (F-F)min on Z reached saturation at Z = 67 (Ho). The base F1− radius r− = 1.2539(16) Å was calculated as the arithmetic mean of five (F-F)min in LnF3 with Ln = Ho-Lu. For the LnF3 series with Ln contributions up to 75 % wt., the dependence of (Ln-F)min on Z reflected the non-uniformity of the 4f orbital filling. SIR was calculated as the difference in the empirical constants of RF3 (ionic radii of (R,Ln)3+ (r+) and F1− (r−)), the change in which was continuous over the series and did not depend on the type of structure: r+ = (ZR-F)min − ½(F-F)min (Z = 57–71). The changes in LC in the LnF3 series were described by a third-degree polynomial. LC reduced r+ by 24% (percentage relative to less) from 1.1671(16) Å (La3+) to 0.9439(17) Å (Lu3+). In the Spec-zd Emp SIR, r+ were constants that did not require corrections for a coordination number (CN). A comparison of r+ in the Spec-zd Emp SIR with other SIRs was performed.
- 3 December 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (23) , 17080
Open AccessLanthanide Contraction in LnF3 (Ln = Ce-Lu) and Its Chemical and Structural Consequences: Part 2: Specialized Empirical System of R3+ (R = Y, La, and 14 Ln) and F1− Ionic Radii for RF3 Series
A specialized empirical (Spec-zd Emp) system of ionic radii (SIR) for R = Y3+, La3+, Ln3+, and F1− (R rare earth elements (REE)) was derived from the dependence of lanthanide contraction (LC) on the atomic number (Z) of lanthanides (Ln). LC decreased the radius of the cation with increasing Z. The structures of t-RF3 (LaF3-NdF3, “pseudo t-SmF3”) of the LaF3 type, 11 β-LnF3 (Ln = Sm-Lu), and β-YF3 of the β-YF3 type were studied. The empirical basis of the shortest (F-F)min and (R-F)min distances was calculated from the structural data for the RF3 complete series. The dependence of (F-F)min on Z reached saturation at Z = 67 (Ho). The base F1− radius r− = 1.2539(16) Å was calculated as the arithmetic mean of five (F-F)min in LnF3 with Ln = Ho-Lu. For the LnF3 series with Ln contributions up to 75 % wt., the dependence of (Ln-F)min on Z reflected the non-uniformity of the 4f orbital filling. SIR was calculated as the difference in the empirical constants of RF3 (ionic radii of (R,Ln)3+ (r+) and F1− (r−)), the change in which was continuous over the series and did not depend on the type of structure: r+ = (ZR-F)min − ½(F-F)min (Z = 57–71). The changes in LC in the LnF3 series were described by a third-degree polynomial. LC reduced r+ by 24% (percentage relative to less) from 1.1671(16) Å (La3+) to 0.9439(17) Å (Lu3+). In the Spec-zd Emp SIR, r+ were constants that did not require corrections for a coordination number (CN). A comparison of r+ in the Spec-zd Emp SIR with other SIRs was performed.