LHLawrence A. Hawkins

Lawrence A. Hawkins

*This is an algorithmically generated author record based on publicly available information.

Lawrence A. Hawkins has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design of a Compact Magnetically Levitated Blower for Space Applications

    by Lawrence Hawkins, Alexei Filatov, Rasish Khatri, Christopher Dellacorte, Samuel Howard

    NASA is leading the design and development of a next-generation CO2 removal system, the Four Bed Carbon Dioxide Scrubber (4BCO2), and intends to use the International Space Station (ISS) as its testbed. A key component of the system is the blower that provides the airflow through the CO2 sorbent beds. To improve performance and reliability, magnetic levitation (magnetic bearings)


  • Design of a Compact Magnetically Levitated Blower for Space Applications

    by Lawrence A. Hawkins, Alexei Filatov, Rasish Khatri, Christopher DellaCorte, Samuel A. Howard

    NASA is leading the design and development of a next-generation CO2 removal system, the four bed carbon dioxide scrubber (4BCO2), and intends to use the International Space Station (ISS) as its testbed. A key component of the system is the blower that provides the airflow through the CO2 sorbent beds. To improve performance and reliability, magnetic levitation (magnetic bearings) will be used in lieu of more conventional bearings (e.g., ball bearings or air bearings) to improve resistance to contaminants and enable extensibility with regards to blower speed, pressure rise and mass flow rate. The blower will pull air from the ISS through an adsorbing desiccant bed and push it through a CO2 sorbent bed and desorbing desiccant bed. The 4BCO2 blower features an overhung permanent magnet motor, a centrally located five-axis, active magnetic bearing system, backup bearings, and an overhung centrifugal impeller in a very compact package. Magnetic bearings are a natural choice for this application due to low power consumption, low transmitted vibration and oil free operation. This article describes the design considerations and design selections for the blower system with a focus on the magnetic bearings. Magnetic FEA of the actuator/sensor system, rotordynamics/controls analysis, and backup bearing drop simulations are discussed in detail. It is expected that the successful implementation of magnetic bearings for this space application will encourage the more widespread adoption in other space applications (e.g., fluid pumps, reaction wheels) that challenge conventional bearing technologies.


  • Open Access

    Homopolar Permanent-Magnet-Biased Actuators and Their Application in Rotational Active Magnetic Bearing Systems

    by Alexei Filatov, Larry Hawkins, Patrick McMullen

    Active Magnetic Bearings (AMBs) are already widely used in rotating machinery and continue to gain popularity due to the ever-present push to higher rotational speeds and decreasing prices of associated electronic components. They offer several advantages over conventional mechanical bearings including non-contact rotor support (thus eliminating mechanical wear and the need for lubricants), ability to tune bearing parameters through software for optimum machine performance, remote monitoring and health diagnostic, etc. In some applications, such as in a vacuum or in aggressive environments, they are often the only viable solution. An electromagnetic actuator, along with a position sensor and control electronics, is a key component of AMBs. While there is a variety of actuator designs described in the literature, most of the AMBs built commercially use heteropolar radial electrical actuators in combination with a dedicated electrically-biased axial actuators. On the contrary, since its inception in 1998, Calnetix Technologies mainly uses homopolar permanent magnet (PM)-biased radial actuators along with a homopolar PM-biased combination radial/axial actuators. In this paper, we provide an overview of the research we have done over the last 15 years in this area focusing on the advantages and disadvantages of this approach and explaining why we have made certain design choices.


  • Model-Based Analysis of Friction-Induced Subsynchronous Whirl for a Rotor Contacting With Clearance Bearings Under Axial Load

    by Matthew O. T. Cole, Lawrence Hawkins

    For rotors supported by active magnetic bearings (AMBs), clearance bearings are commonly used to provide backup support under loss of AMB functionality. Test data from real machines shows that vibration during touchdown on backup bearings may involve steady forward whirling of the rotor with a subsynchronous frequency. This excitation is believed to be due to friction forces transmitted between the rotor and a bearing end-face under axial load. This paper proposes a new analytical approach to model and predict such friction-driven forward whirl behaviors. A set of constraint equations are derived that relate a circular whirl motion of arbitrary orbital speed to the frequency response functions for the rotor-housing structure. This model is coupled with an evaluation of Coulomb friction associated with slip between the rotor and the supporting end-face of a thrust bearing. The resulting equations can be used to compute a set of possible whirl motions via a root-finding procedure. A case study is undertaken for a 140 kW energy storage flywheel. Model-based predictions are compared with measured data from spin-down tests and show a good level of agreement. The study confirms the role of friction-related forces in driving forward-whirl response behaviors. It also highlights the key role of housing and machine support characteristics in response behavior. This influence is shown to be complex and not open to simple physical interpretation. Therefore, the proposed analytical method is seen as a useful tool to investigate this influence while avoiding the need for time consuming numerical simulations.


  • Test Results and Analytical Predictions for MIL-STD-167 Vibration Testing of a Direct Drive Compressor Supported on Magnetic Bearings

    by Lawrence A. Hawkins, Rasish K. Khatri, Koman B. Nambiar

    External vibration testing was performed on a semihermetic, direct drive compressor on magnetic bearings intended for U.S. Navy Shipboard use. The compressor was placed on a U.S. Navy MIL-STD-167 shaker platform and driven at sinusoidal frequencies from 4 to 33 Hz at graduated displacements equal to a maximum of 1.5 Gs. During the machine design phase, a linear forced response analysis of the coupled rotordynamic system model of the rotor, housing, and magnetic bearings was performed to predict rotor/housing displacements and actuator loads. The results were used to guide bearing sizing and control algorithm design. The measured rotor motion and actuator currents correlated well with predictions at all tested frequencies, amplitudes, and orientations. Analysis methodology, test results, and comparisons are reported here.


  • Development of a 125 kW AMB Expander/Generator for Waste Heat Recovery

    by Lawrence A. Hawkins, Lei Zhu, Eric J. Blumber

    The development and testing of an integrated power module (IPM) for a waste heat recovery system is described. The IPM is part of a waste heat recovery system based on the organic Rankine cycle. The waste heat system can recover energy from a wide variety of heat sources including landfill gas, reciprocating engine exhaust, solar, geothermal, boilers, and other industrial processes. The IPM incorporates a high performance, high speed permanent magnet generator with an integrated expansion turbine and low loss magnetic bearings. The IPM operates between 20,000 rpm and 26,500 rpm depending on the energy available from the heat source. The varying frequency voltage supplied by the generator is connected to the grid using an active/active power electronics package that can deliver power at 400–480 Vac (50 Hz or 60 Hz). Active magnetic bearings (AMBs) were chosen for the application because they can operate directly in the working fluid, have low losses, and provide high reliability and remote monitoring capabilities. This system has a flow-through design and an inboard impeller layout that produces desirable rotordynamics for a simple magnetic bearing control. An extensive shop testing procedure is described, and measurements and predictions are presented, showing good correlation. Shop testing of the IPM in the waste heat system has been completed for 15 systems. The magnetic bearings and backup bearings have performed as designed. The thrust balancing system has limited the thrust load that must be reacted by the axial magnetic bearings to 25% of the design load capacity in the worst case. The first field unit was installed in April 2009 at a biogas site.


  • Development of a 125KW AMB Expander/Generator for Waste Heat Recovery

    by Lawrence A. Hawkins, Lei Zhu, Eric J. Blumber

    Development and field testing of a low cost expander/generator system that incorporates a high performance, high-speed permanent magnet generator and low loss magnetic bearings is described. The expander/generator is part of a waste heat recovery system based on the Organic Rankine Cycle. The waste heat system can recover energy from a wide variety of heat sources including: landfill gas, reciprocating engine exhaust, solar, geothermal, boilers, and other industrial processes. The varying frequency voltage supplied by the generator is connected to the grid using an active/active power electronics package that can deliver power at 400–480 VAC (50 or 60 Hz). Active magnetic bearings (AMB) were chosen for the application because they can operate directly in the working fluid, have low losses, and provide high reliability and remote monitoring capabilities. The expander operates between 20,000 and 26,500 rpm depending on the energy available from the heat source. The first field unit was installed in April, 2009 at a biogas site. The system design, test results, and magnetic bearing operating experience are discussed.