Pedro M. Vargas
Research Subjects
Pedro M. Vargas has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Dale G. Karr
Department of Naval Architecture and Marine Engineering University of Michigan Ann Arbor 48109-2145 MI USA
2 shared publications - Weiwei Yu
Chevron Energy Technology Company, Houston, TX, 77002
2 shared publications - E. Carlberg1 shared publication
- E. Gooijer1 shared publication
I.S. H\Xf8Gs\Xe6T
1 shared publication- J. Braun1 shared publication
Latest Publications
- Open Access
- 16 July 2021
- Published by ASME International
Out-of-Plane Bending (Opb) Test of Large Diameter Mooring Chains
Chevron Corporation and Bluewater Energy Services performed a chain out-of-plane bending (OPB) test, called OPB MAX hereafter, at DNV GL’s laboratory in Høvik-Norway. The test was performed to study the OPB phenomenon for a chain diameter which was larger than the maximum diameter tested by the OPB JIP. The goal was to understand chain OPB physics for such a large diameter, measure
- 16 July 2021
- Published by ASME International
Open AccessOut-of-Plane Bending (Opb) Test of Large Diameter Mooring Chains
Chevron Corporation and Bluewater Energy Services performed a chain out-of-plane bending (OPB) test, called OPB MAX hereafter, at DNV GL’s laboratory in Høvik-Norway. The test was performed to study the OPB phenomenon for a chain diameter which was larger than the maximum diameter tested by the OPB JIP. The goal was to understand chain OPB physics for such a large diameter, measure
- Open Access
- 16 July 2021
- Published by ASME International
Design and Analysis of a High Pressure Laboratory Vessel for Testing Well Cement
The Steam Permeameter Cell is a laboratory-scale pressure vessel used to perform high pressure, high temperature testing on well cement slurries. Initial sizing of the concentric, two chamber vessel was based on design by rule concepts in the ASME Boiler and Pressure Vessel Code, Section VIII Division 1. However, based on the complex transient loading expected during the specified
- 16 July 2021
- Published by ASME International
Open AccessDesign and Analysis of a High Pressure Laboratory Vessel for Testing Well Cement
The Steam Permeameter Cell is a laboratory-scale pressure vessel used to perform high pressure, high temperature testing on well cement slurries. Initial sizing of the concentric, two chamber vessel was based on design by rule concepts in the ASME Boiler and Pressure Vessel Code, Section VIII Division 1. However, based on the complex transient loading expected during the specified
- 6 December 2011
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 134 (2) , 021404
Corrosion Effects on Reliability of Flat Plates in Tension
Neuber’s theory of elastic and inelastic stress concentration factors are applied to the pit corrosion of plates. The finite element method is then employed to model the problem numerically and to calculate the stress concentration factors for semioblate spheroidal pits. Furthermore, corrosion development is a process with many random factors such as the geometry and the growth rate. A realistic reflection of corrosion effects on structural failure is to consider it within the framework of reliability analysis. By knowing the analytical formula of stress concentration factor, reliability analyses are conducted to calculate the reliability safety index of the panel based on a strain-based limit state. The structural failure can then be directly related to the reliability safety index. The reliability procedure is demonstrated in an example of a highly deformed bottom shell panel during ship grounding. Partial safety factors of two random variables which describe pit corrosion geometry and the effective nominal strain level are also calculated. Recommendations for using partial safety factors are provided.
- 6 December 2011
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 134 (2) , 021404
Corrosion Effects on Reliability of Flat Plates in Tension
Neuber’s theory of elastic and inelastic stress concentration factors are applied to the pit corrosion of plates. The finite element method is then employed to model the problem numerically and to calculate the stress concentration factors for semioblate spheroidal pits. Furthermore, corrosion development is a process with many random factors such as the geometry and the growth rate. A realistic reflection of corrosion effects on structural failure is to consider it within the framework of reliability analysis. By knowing the analytical formula of stress concentration factor, reliability analyses are conducted to calculate the reliability safety index of the panel based on a strain-based limit state. The structural failure can then be directly related to the reliability safety index. The reliability procedure is demonstrated in an example of a highly deformed bottom shell panel during ship grounding. Partial safety factors of two random variables which describe pit corrosion geometry and the effective nominal strain level are also calculated. Recommendations for using partial safety factors are provided.
- 5 December 2011
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 134 (2) , 021701
Bending Capacity Analyses of Corroded Pipeline
Appendix G of the ASME B31 pipeline and piping codes addresses the pressure containment capacity of pipelines and vessels with locally corroded sections. However, the ability of corroded sections to carry moment, for example, in thermal loops, is not addressed in fitness-for-service codes today. This paper presents nonlinear Finite Element Analysis (FEA) and full-scale 4-point-bend testing of pipes with locally-thinned-areas (LTAs) to simulate corrosion. The LTAs are loaded in compression, and the buckle moment is used as the carrying capacity of the corroded section. The nonlinear FEA is found to match the experimental results, validating this methodology for computing moment capacity in corroded sections. Significant secondary effects were found to affect the testing results. This paper identifies and quantifies these effects. Also, somewhat contrary to intuition, internal pressure is demonstrated to adversely affect the bending capacity for the intermediate-low ratio (17.25) pipe tested.- 5 December 2011
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 134 (2) , 021701
Bending Capacity Analyses of Corroded Pipeline
Appendix G of the ASME B31 pipeline and piping codes addresses the pressure containment capacity of pipelines and vessels with locally corroded sections. However, the ability of corroded sections to carry moment, for example, in thermal loops, is not addressed in fitness-for-service codes today. This paper presents nonlinear Finite Element Analysis (FEA) and full-scale 4-point-bend testing of pipes with locally-thinned-areas (LTAs) to simulate corrosion. The LTAs are loaded in compression, and the buckle moment is used as the carrying capacity of the corroded section. The nonlinear FEA is found to match the experimental results, validating this methodology for computing moment capacity in corroded sections. Significant secondary effects were found to affect the testing results. This paper identifies and quantifies these effects. Also, somewhat contrary to intuition, internal pressure is demonstrated to adversely affect the bending capacity for the intermediate-low ratio (17.25) pipe tested.