Jong Gye Shin
Research Subjects
Jong Gye Shin has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Kwang Hee Ko
Gwangju Institute of Science and Technology (GIST)
4 shared publications - Chung Min Hyun
Samsung Heavy Ind Co Ltd, Geoje, South Korea
3 shared publications - Jung Seo Park
Department of Naval Architecture and Ocean Engineering, Seoul National University, Seoul 151-742, Korea
3 shared publications Hyunjune Yim
2 shared publications- Young Chil Doh
Samsung Heavy Ind Co Ltd, Geoje, South Korea
2 shared publications - Cheolho Ryu
Department of Naval Architecture and Ocean Engineering , Inha University , Incheon, 402-751, Republic of Korea
1 shared publication
Latest Publications
- 4 January 2012
- Published by Taylor & Francis in International Journal of Computer Integrated Manufacturing
- Vol. 25 (7) , 608-624
Optimum subdivision of curved hull plates for efficient ship manufacture using minimum strain energy
In this article, a novel hull subdivision method is presented. Hull subdivision is a process to subdivide the hull shape into smaller pieces, each of which can be fabricated individually. It is an important step since the fabrication time and cost depend on how the hull shape is subdivided. This process, however, has been done heuristically using experienced workers’ know-how, which makes it difficult for automation due to the difficulty of quantifying the workers’ expertise in an objective manner. Furthermore, the performance evaluation of the subdivision work has not been conducted. In this work, the subdivision process has been analysed using mechanical and mathematical theories considering strain energy and welding length of a plate, and a systematic procedure to perform subdivision using the differential evolution method, a combinatorial optimisation scheme, is proposed. The proposed method is tested with examples obtained from an existing ship, which demonstrates that the proposed method has the potential for replacing the current manual subdivision process.
- 4 January 2012
- Published by Taylor & Francis in International Journal of Computer Integrated Manufacturing
- Vol. 25 (7) , 608-624
Optimum subdivision of curved hull plates for efficient ship manufacture using minimum strain energy
In this article, a novel hull subdivision method is presented. Hull subdivision is a process to subdivide the hull shape into smaller pieces, each of which can be fabricated individually. It is an important step since the fabrication time and cost depend on how the hull shape is subdivided. This process, however, has been done heuristically using experienced workers’ know-how, which makes it difficult for automation due to the difficulty of quantifying the workers’ expertise in an objective manner. Furthermore, the performance evaluation of the subdivision work has not been conducted. In this work, the subdivision process has been analysed using mechanical and mathematical theories considering strain energy and welding length of a plate, and a systematic procedure to perform subdivision using the differential evolution method, a combinatorial optimisation scheme, is proposed. The proposed method is tested with examples obtained from an existing ship, which demonstrates that the proposed method has the potential for replacing the current manual subdivision process.
- 12 July 2011
- Published by Wiley in Systems Engineering
- Vol. 15 (1) , 14-27
A business model‐based design of a damage control support system for naval ships
When a ship is hit, cutting‐edge damage control systems are used to mitigate the problem, but most onboard recovery activities are carried out by the crew. Therefore, the key to damage control rests with the activity of the crew. To design a new damage control support system, a reasonable design process is required. Systems engineering has been applied in the development of many defense systems, and the effectiveness of its contribution has been proven. However, the success of a project also depends on other factors, such as “user involvement,” “concern of executive,” and “expectation”; contemporary systems engineering process do not consider these factors enough. This paper uses a systems engineering approach to guide the development of a new business model‐based design method. To guarantee success of the project in the design phase, a business model is used as the “system analysis and control” tool. A new system for damage control support is developed using the proposed design process. The proposed design process makes it possible to design a reasonable system for damage control support with a minimal number of physical components, at affordable cost. The method also makes it possible to validate a given system's effectiveness and technological feasibility. © 2011 Wiley Periodicals, Inc. Syst Eng
- 12 July 2011
- Published by Wiley in Systems Engineering
- Vol. 15 (1) , 14-27
A business model‐based design of a damage control support system for naval ships
When a ship is hit, cutting‐edge damage control systems are used to mitigate the problem, but most onboard recovery activities are carried out by the crew. Therefore, the key to damage control rests with the activity of the crew. To design a new damage control support system, a reasonable design process is required. Systems engineering has been applied in the development of many defense systems, and the effectiveness of its contribution has been proven. However, the success of a project also depends on other factors, such as “user involvement,” “concern of executive,” and “expectation”; contemporary systems engineering process do not consider these factors enough. This paper uses a systems engineering approach to guide the development of a new business model‐based design method. To guarantee success of the project in the design phase, a business model is used as the “system analysis and control” tool. A new system for damage control support is developed using the proposed design process. The proposed design process makes it possible to design a reasonable system for damage control support with a minimal number of physical components, at affordable cost. The method also makes it possible to validate a given system's effectiveness and technological feasibility. © 2011 Wiley Periodicals, Inc. Syst Eng
- 31 December 2009
- Published by Elsevier in Computer-Aided Design
- Vol. 41 (12) , 907-917
Application of localization for the fabrication of large curved plates in shipbuilding
- 31 December 2009
- Published by Elsevier in Computer-Aided Design
- Vol. 41 (12) , 907-917
Application of localization for the fabrication of large curved plates in shipbuilding
- 18 March 2009
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 131 (2) , 021007
The Determination of Heating Shapes and Locations for Triangle Heating
Thermal forming is a method to form a curved plate by inducing local shrinkage and angular distortion through heating and cooling. In this approach, two different methods are available: line heating and triangle heating. Among them, this paper discusses triangle heating and presents algorithms for determining heating shapes and locations. The heating shape is determined by using the in-plane strain distributions, which are calculated by nonlinear kinematics analysis between the designed and initial shapes, field survey results, and mechanics based on the neutral axis. To predict the angular distortion and shrinkage in various heating conditions, a functional relation of residual deformations is formulated. For the formulation, multivariate analysis and multiple regression techniques are used with data obtained from experiments of unit triangle heating and numerical analysis. Using the determined heating shapes and the functional relation for the residual deformations, a correct triangle heating position is determined by an algorithm, which can predict qualitatively correct angular distortion and shrinkage in the interior and quantitatively correct distortion values on the edge. Finally, analytic verification of the proposed method has been done by applying the method to a convex type plate used in the field. The proposed work can be used for automation of curved plate fabrication in the shipyards.
- 18 March 2009
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 131 (2) , 021007
The Determination of Heating Shapes and Locations for Triangle Heating
Thermal forming is a method to form a curved plate by inducing local shrinkage and angular distortion through heating and cooling. In this approach, two different methods are available: line heating and triangle heating. Among them, this paper discusses triangle heating and presents algorithms for determining heating shapes and locations. The heating shape is determined by using the in-plane strain distributions, which are calculated by nonlinear kinematics analysis between the designed and initial shapes, field survey results, and mechanics based on the neutral axis. To predict the angular distortion and shrinkage in various heating conditions, a functional relation of residual deformations is formulated. For the formulation, multivariate analysis and multiple regression techniques are used with data obtained from experiments of unit triangle heating and numerical analysis. Using the determined heating shapes and the functional relation for the residual deformations, a correct triangle heating position is determined by an algorithm, which can predict qualitatively correct angular distortion and shrinkage in the interior and quantitatively correct distortion values on the edge. Finally, analytic verification of the proposed method has been done by applying the method to a convex type plate used in the field. The proposed work can be used for automation of curved plate fabrication in the shipyards.
- 17 July 2008
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 130 (4) , 041013
A Localization Algorithm for Improving Fabrication of Curved Hull Plates in Shipbuilding
In this paper, a localization method is proposed for improving the curved plate fabrication process. In the curved plate forming, checking the similarity of a manufactured plate to a CAD model is a critical step, which can be done by aligning the manufactured plate to the CAD model. Although there exist several localization methods, they may not be suitable for the curved plate forming since they do not consider production efficiency (the shortest cutting length for trimming margin) for the subsequent assembly process. Therefore, in this work, a constraint for minimizing the cutting length is introduced in the localization scheme and an algorithm is proposed to handle the problem. A manufactured plate is measured and a constraint is imposed on the reference points of a CAD model and the measured points to limit the direction of the movement of the measured points in the solution process. Through this algorithm, the CAD model and the measured points are aligned such that the shortest cutting length is obtained. After the alignment, the cutting lines are computed for marking on the manufactured plate. Various curved plates taken from the real ship manufacturing process are used to demonstrate the performance of the proposed algorithm.
- 17 July 2008
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 130 (4) , 041013
A Localization Algorithm for Improving Fabrication of Curved Hull Plates in Shipbuilding
In this paper, a localization method is proposed for improving the curved plate fabrication process. In the curved plate forming, checking the similarity of a manufactured plate to a CAD model is a critical step, which can be done by aligning the manufactured plate to the CAD model. Although there exist several localization methods, they may not be suitable for the curved plate forming since they do not consider production efficiency (the shortest cutting length for trimming margin) for the subsequent assembly process. Therefore, in this work, a constraint for minimizing the cutting length is introduced in the localization scheme and an algorithm is proposed to handle the problem. A manufactured plate is measured and a constraint is imposed on the reference points of a CAD model and the measured points to limit the direction of the movement of the measured points in the solution process. Through this algorithm, the CAD model and the measured points are aligned such that the shortest cutting length is obtained. After the alignment, the cutting lines are computed for marking on the manufactured plate. Various curved plates taken from the real ship manufacturing process are used to demonstrate the performance of the proposed algorithm.
- 1 October 2005
- Published by The Korean Society of Mechanical Engineers in Transactions of the Korean Society of Mechanical Engineers - A
- Vol. 29 (10) , 1377-1383
Development of an Efficient Method to Consider Weld Distortion in Tolerance Analysis
- 1 October 2005
- Published by The Korean Society of Mechanical Engineers in Transactions of the Korean Society of Mechanical Engineers - A
- Vol. 29 (10) , 1377-1383
Development of an Efficient Method to Consider Weld Distortion in Tolerance Analysis
- 10 May 2005
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 128 (1) , 261-269
Optimal Approximated Unfolding of General Curved Shell Plates Based on Deformation Theory
Surfaces of many engineering structures, especially those of ships and airplanes, are commonly fabricated as either single- or double-curved surfaces to meet functional requirements. The first step in the fabrication process of a three-dimensional design surface is unfolding or flattening the surface, otherwise known as planar development, so that manufacturers can determine the initial shape of the flat plate. Also a good planar development enables the manufacturer to estimate the strain distribution required to form the design shape. In this paper, an algorithm for optimal approximated development of a general curved surface, including both single- and double-curved surfaces, is established by minimizing the strain energy of deformation from its planar development to the design surface. The unfolding process is formulated into a constrained nonlinear programming problem, based on the deformation theory and finite element. Constraints are subjected to the characteristics of the fabrication method. Some typical surfaces, such as convex-, saddle-, and cylinder-type ones, as well as the surfaces of practical ships are unfolded using the proposed algorithm and the results show the effectiveness of this algorithm.
- 10 May 2005
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 128 (1) , 261-269
Optimal Approximated Unfolding of General Curved Shell Plates Based on Deformation Theory
Surfaces of many engineering structures, especially those of ships and airplanes, are commonly fabricated as either single- or double-curved surfaces to meet functional requirements. The first step in the fabrication process of a three-dimensional design surface is unfolding or flattening the surface, otherwise known as planar development, so that manufacturers can determine the initial shape of the flat plate. Also a good planar development enables the manufacturer to estimate the strain distribution required to form the design shape. In this paper, an algorithm for optimal approximated development of a general curved surface, including both single- and double-curved surfaces, is established by minimizing the strain energy of deformation from its planar development to the design surface. The unfolding process is formulated into a constrained nonlinear programming problem, based on the deformation theory and finite element. Constraints are subjected to the characteristics of the fabrication method. Some typical surfaces, such as convex-, saddle-, and cylinder-type ones, as well as the surfaces of practical ships are unfolded using the proposed algorithm and the results show the effectiveness of this algorithm.
- 1 December 2001
- Published by Springer Nature in KSME International Journal
- Vol. 15 (12) , 1655-1663
Mechanics-based determination of the center roller displacement in three-roll bending for smoothly curved rectangular plates
- 1 December 2001
- Published by Springer Nature in KSME International Journal
- Vol. 15 (12) , 1655-1663
Mechanics-based determination of the center roller displacement in three-roll bending for smoothly curved rectangular plates