İsMail Girgin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
İsMail Girgin has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
A. Yörükoğlu
Mineral Research and Exploration General Directorate
1 shared publication- Abdullah Obut
Hacettepe Univ, Min Engn Dept, TR-06800 Ankara, Turkey
1 shared publication Ayşe Üçyıldız
Mining Engineering Department, Hacettepe University, 06800, Beytepe, Ankara, Turkey
1 shared publication
Latest Publications
- Open Access
- 17 June 2010
- Published by Walter de Gruyter GmbH in Open Chemistry
- Vol. 8 (4) , 758-765
Controlled synthesis, characterization and thermal properties of Mg2B2O5
Optimum conditions for synthesizing monoclinic and triclinic Mg2B2O5 compounds by high-temperature solid-state reactions were investigated. Mixtures composed of boric acid and magnesium oxide at MgO:B2O3 mole ratios of 1:0.25, 1:0.5 and 1:1.5 were heated for 1 hour at temperatures between 600–1050°C and the formed phases were identified by XRD analysis. Monoclinic Mg2B2O5 was formed by heating at 850°C for 4 hours together with minimum amounts of triclinic Mg2B2O5, while triclinic Mg2B2O5 was formed as a single phase at 1050°C for the same reaction time. The products obtained at optimum conditions were subjected to a series of tests to determine their chemical compositions, particle size distributions, surface area values, IR spectra and TG/DTA patterns.
- 17 June 2010
- Published by Walter de Gruyter GmbH in Open Chemistry
- Vol. 8 (4) , 758-765
Open AccessControlled synthesis, characterization and thermal properties of Mg2B2O5
Optimum conditions for synthesizing monoclinic and triclinic Mg2B2O5 compounds by high-temperature solid-state reactions were investigated. Mixtures composed of boric acid and magnesium oxide at MgO:B2O3 mole ratios of 1:0.25, 1:0.5 and 1:1.5 were heated for 1 hour at temperatures between 600–1050°C and the formed phases were identified by XRD analysis. Monoclinic Mg2B2O5 was formed by heating at 850°C for 4 hours together with minimum amounts of triclinic Mg2B2O5, while triclinic Mg2B2O5 was formed as a single phase at 1050°C for the same reaction time. The products obtained at optimum conditions were subjected to a series of tests to determine their chemical compositions, particle size distributions, surface area values, IR spectra and TG/DTA patterns.
- 1 April 2010
- Published by Pleiades Publishing Ltd in Russian Journal of Inorganic Chemistry
- Vol. 55 (4) , 646-654
Effect of methanol on the dissolution of neodymium oxide in hydrochloric acid solutions
The effect of methanol on the solubility of Nd2O3 in HCl medium in the temperature range of 25–55°C were studied. HCl-CH3OH was observed to be a better solvent than HCl-CH3OH-H2O and hydrochloric acid for the dissolution of Nd2O3 mainly due to prevention of neodymium hydroxide and dissolution increased with increase of HCl concentration even at high HCl concentrations. Presence of methanol in the medium was determined to cause corresponding decreases in conductivity, ESCE, pH values with corresponding increase in ER values. Neodymium compounds formed in HCl-CH3OH medium at 25°C were isolated and identified using X-ray diffraction, thermal and chemical analysis methods and their thermal behaviour were investigated between 25–1100°C. NdCl3 × x 1CH3OH and NdCl3 × x 2CH3OH × 4.14H2O (x 1 + x 2 = 2.8) were formed in non-aqueous medium and these compounds were converted into NdCl3, NdCl2.37 and NdCl3 × 0.47CH3OH with complete and partial loss of water and methanol around 240°C respectively. Methanol was completely removed around 390°C with formation of NdCl2.37 (77.5%) and NdOCl (22.5%) and NdOCl was detected as the major stable phase above 700°C.
- 1 April 2010
- Published by Pleiades Publishing Ltd in Russian Journal of Inorganic Chemistry
- Vol. 55 (4) , 646-654
Effect of methanol on the dissolution of neodymium oxide in hydrochloric acid solutions
The effect of methanol on the solubility of Nd2O3 in HCl medium in the temperature range of 25–55°C were studied. HCl-CH3OH was observed to be a better solvent than HCl-CH3OH-H2O and hydrochloric acid for the dissolution of Nd2O3 mainly due to prevention of neodymium hydroxide and dissolution increased with increase of HCl concentration even at high HCl concentrations. Presence of methanol in the medium was determined to cause corresponding decreases in conductivity, ESCE, pH values with corresponding increase in ER values. Neodymium compounds formed in HCl-CH3OH medium at 25°C were isolated and identified using X-ray diffraction, thermal and chemical analysis methods and their thermal behaviour were investigated between 25–1100°C. NdCl3 × x 1CH3OH and NdCl3 × x 2CH3OH × 4.14H2O (x 1 + x 2 = 2.8) were formed in non-aqueous medium and these compounds were converted into NdCl3, NdCl2.37 and NdCl3 × 0.47CH3OH with complete and partial loss of water and methanol around 240°C respectively. Methanol was completely removed around 390°C with formation of NdCl2.37 (77.5%) and NdOCl (22.5%) and NdOCl was detected as the major stable phase above 700°C.
- 27 June 2006
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 39 (2) , 79-83
Preparation of sodium borosilicates using sodium silicate and boric acid
- 27 June 2006
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 39 (2) , 79-83
Preparation of sodium borosilicates using sodium silicate and boric acid