Sergey V. Golovastov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sergey V. Golovastov has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Grigory Yu. Bivol
Joint Institute for High Temperatures of Russian Academy of Science, Moscow, Russia
9 shared publications - Victor V. Golub
Joint Institute for High Temperatures (JIHT), Russian Academy of Sciences, Moscow, Russia
8 shared publications V. V. Golub
Russian Academy of Sciences
4 shared publications- Vladislav V. Volodin
Joint Institute for High Temperatures of the Russian Academy of Sciences, Izhorskaya 13 Bldg 2, Moscow 125412, Russia
3 shared publications D. I. Baklanov
Russian Academy of Sciences
2 shared publications- Fyodor Kuleshov
Joint Institute for High Temperatures of Russian Academy of Science, Moscow, Russia
2 shared publications
Latest Publications
- 12 October 2025
- Published by Elsevier in Acta Astronautica
- Vol. 238, 307-319
Self-ignition of hydrogen jet released into unconfined space under high pressure
- 12 October 2025
- Published by Elsevier in Acta Astronautica
- Vol. 238, 307-319
Self-ignition of hydrogen jet released into unconfined space under high pressure
- 4 August 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 162
Flame quenching in porous media at low pressure
- 4 August 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 162
Flame quenching in porous media at low pressure
- 3 July 2025
- Published by Elsevier in Fire Safety Journal
- Vol. 156
Propagation of the flame front of methane-air mixture through copper foam within a channel
- 3 July 2025
- Published by Elsevier in Fire Safety Journal
- Vol. 156
Propagation of the flame front of methane-air mixture through copper foam within a channel
- Open Access
Potential Flow of Unburned Mixture and Combustion Products After Ignition in a Two-Dimensional Approximation
The evolution of a flame front in a channel was considered in a two-dimensional approximation. In the approximation of the potential flow of combustion products and unburned mixture, the formation of a finger-shaped flame was considered after ignition at the closed end of the channel, on the channel axis, and on the side wall of the channel. The prerequisites for the formation of a tulip-shaped flame were considered in a potential approximation. The method of conformal mapping was used. Simple analytical functions were used that allowed equipotential lines and streamlines to be transformed. The shape of the flame front was obtained. The analytical results were compared with the experimentally obtained results of the flame front evolution and with numerical results obtained by other authors. The conditions for the applicability of the conformal mapping to a reacting gas mixture were given.
Open AccessPotential Flow of Unburned Mixture and Combustion Products After Ignition in a Two-Dimensional Approximation
The evolution of a flame front in a channel was considered in a two-dimensional approximation. In the approximation of the potential flow of combustion products and unburned mixture, the formation of a finger-shaped flame was considered after ignition at the closed end of the channel, on the channel axis, and on the side wall of the channel. The prerequisites for the formation of a tulip-shaped flame were considered in a potential approximation. The method of conformal mapping was used. Simple analytical functions were used that allowed equipotential lines and streamlines to be transformed. The shape of the flame front was obtained. The analytical results were compared with the experimentally obtained results of the flame front evolution and with numerical results obtained by other authors. The conditions for the applicability of the conformal mapping to a reacting gas mixture were given.
- 29 May 2025
- Published by Springer Nature in Experiments in Fluids
- Vol. 66 (6) , 1-14
Interaction of strong shock waves with perforated stainless-steel plate in a shock tube
- 29 May 2025
- Published by Springer Nature in Experiments in Fluids
- Vol. 66 (6) , 1-14
Interaction of strong shock waves with perforated stainless-steel plate in a shock tube
- 18 April 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 128, 684-696
Patterns of hydrogen flame propagation and acceleration in the channels with copper foam
- 18 April 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 128, 684-696
Patterns of hydrogen flame propagation and acceleration in the channels with copper foam
- 1 December 2024
- Published by Pleiades Publishing Ltd in Instruments and Experimental Techniques
- Vol. 67 (6) , 1189-1200
Comparative Analysis of the Characteristics of Various Piezoelectric Pressure Transducers
A comparative analysis of the characteristics of various piezoelectric transducers for measuring pulse pressures was performed. Their sensitivity and response time were determined, and the effects of the steady-state temperature and pulsed heat flows on the measurement results were investigated. The conditions for the linearity of characteristics under the experimental conditions were established. The conditions were determined for observing the “thermal zero drift,” which characterized the influence of thermal heating on the output data of pressure transducers. The investigations were carried out in a shock tube, at a special calibration test bench, and at a test bench that generated the stepwise pulse of the radiant heat flow.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Instruments and Experimental Techniques
- Vol. 67 (6) , 1189-1200
Comparative Analysis of the Characteristics of Various Piezoelectric Pressure Transducers
A comparative analysis of the characteristics of various piezoelectric transducers for measuring pulse pressures was performed. Their sensitivity and response time were determined, and the effects of the steady-state temperature and pulsed heat flows on the measurement results were investigated. The conditions for the linearity of characteristics under the experimental conditions were established. The conditions were determined for observing the “thermal zero drift,” which characterized the influence of thermal heating on the output data of pressure transducers. The investigations were carried out in a shock tube, at a special calibration test bench, and at a test bench that generated the stepwise pulse of the radiant heat flow.
- 5 September 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 86, 1238-1251
Scenarios of hydrogen-air ignition during the interaction of a shock wave with a destructible barrier
- 5 September 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 86, 1238-1251
Scenarios of hydrogen-air ignition during the interaction of a shock wave with a destructible barrier
- Open Access
The Formation of a Flame Front in a Hydrogen–Air Mixture during Spark Ignition in a Semi-Open Channel with a Porous Coating
An experimental study of ignition and flame front propagation during spark initiation in a hydrogen–air mixture in a semi-open channel with a porous coating is reported. The bottom surface of the channel was covered with a porous layer made of porous polyurethane or steel wool. The measurements were carried out for a stoichiometric mixture (equivalence ratio ER = 1.0) and for a lean mixture (ER = 0.4) of hydrogen with air, where ER is the molar excess of hydrogen. The flame front was recorded with a high-speed camera using the shadow method. Depending on the pore size, the velocity of the flame front and the sizes of disturbances generated on the surface of the flame front were determined. Qualitative features of the deflagration flame front at ER = 0.4, consisting of disturbances resembling small balls of flame, were discovered. The sizes of these disturbances significantly exceed the analytical values for the Darrieus–Landau instability. The effect of coatings made of porous polyurethane or steel wool is compared with the results obtained for an empty smooth channel. Depending on the hydrogen concentration in the hydrogen–air mixture, the velocity of the flame front compared to a smooth channel was three times higher when the channel was covered with steel wool and five times higher when the channel was covered with porous polyurethane.
Open AccessThe Formation of a Flame Front in a Hydrogen–Air Mixture during Spark Ignition in a Semi-Open Channel with a Porous Coating
An experimental study of ignition and flame front propagation during spark initiation in a hydrogen–air mixture in a semi-open channel with a porous coating is reported. The bottom surface of the channel was covered with a porous layer made of porous polyurethane or steel wool. The measurements were carried out for a stoichiometric mixture (equivalence ratio ER = 1.0) and for a lean mixture (ER = 0.4) of hydrogen with air, where ER is the molar excess of hydrogen. The flame front was recorded with a high-speed camera using the shadow method. Depending on the pore size, the velocity of the flame front and the sizes of disturbances generated on the surface of the flame front were determined. Qualitative features of the deflagration flame front at ER = 0.4, consisting of disturbances resembling small balls of flame, were discovered. The sizes of these disturbances significantly exceed the analytical values for the Darrieus–Landau instability. The effect of coatings made of porous polyurethane or steel wool is compared with the results obtained for an empty smooth channel. Depending on the hydrogen concentration in the hydrogen–air mixture, the velocity of the flame front compared to a smooth channel was three times higher when the channel was covered with steel wool and five times higher when the channel was covered with porous polyurethane.
- 11 November 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 50, 1420-1429
Experimental investigation of detonation decay in rough narrow channels
- 11 November 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 50, 1420-1429
Experimental investigation of detonation decay in rough narrow channels