DWD. Keith Walters

D. Keith Walters

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


D. Keith Walters has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Recommended Correction to the kT−kL−ω Transition-Sensitive Eddy-Viscosity Model

    by Maurin Lopez, D. Keith Walters

    A physics-based modification to the kT−kL−ω transition-sensitive eddy-viscosity model is presented. The modification corrects an anomaly related to the physical mechanism of production of laminar kinetic energy for regions far from the wall in fully turbulent flows, by limiting the production of natural modes in the large-scale eddy-viscosity term by a rescale of the wall-limited turbulent length scale. Round jet and backward facing step test cases are used to reveal the relevant issue and to demonstrate that the new modification successfully addresses the problem.


  • Prediction of transitional and fully turbulent flow using an alternative to the laminar kinetic energy approach

    by Maurin Lopez, D. Keith Walters

    This paper presents a new eddy-viscosity turbulence model for prediction of laminar, transitional and turbulent flow, as an alternative to the popular laminar kinetic energy framework. The model represents a conceptually different description of the transition process, in which the pressure-strain terms of the Reynolds stress budget are suppressed in pretransitional flow regions, and transition is viewed as activation of the pressure-strain terms. This concept has been implemented using an existing linear-eddy viscosity Reynolds-averaged Navier–Stokes transitional model as a baseline, which has been modified to more accurately capture the physics of fully turbulent free shear flows. The model is tested for several boundary layer and free shear flow test cases. The simulations show engineering accurate results, qualitatively equivalent to the baseline transition-sensitive model for boundary layer test cases, and substantially improved over the baseline model for fully turbulent free shear flows. The results suggest that the new model formulation may have a wider range of application than the baseline model for complex transitional and turbulent flows.


  • Open Access

    Investigation of turbulence model and numerical scheme combinations for practical finite-volume large eddy simulations

    by Adetokunbo A. Adedoyin, D. Keith Walters, Shanti Bhushan

    Large eddy simulation (LES) is known to suffer from two primary error sources – the subgrid stress (SGS) model and the numerical discretization scheme. These cannot be separately quantified for finite-volume numerical simulations, but an appropriate combination can yield ‘engineering accurate’ prediction of turbulence dynamics. This paper seeks to evaluate combinations of commonly used second-order numerical schemes and Smagorinsky-type SGS models for practical LES. Error assessments are performed for isotropic decaying turbulence using both pseudospectral and finite-volume solvers, followed by validation for a complex turbulent flow of engineering interest. Error assessment using pseudospectral techniques is performed to isolate finite-differencing and modeling errors by explicitly adding numerical derivative error terms to the simulations. Error assessment using the finite-volume method focuses on identification of optimal model-discretization combinations for the best LES predictions using application solvers. The pseudospectral and finite-volume approaches show consistent predicted behavior of the interplay between numerical and modeling errors for different model-discretization combinations. Of those studied here, the two most optimal combinations are identified as: (1) standard or dynamic Smagorinsky SGS model with a bounded central difference scheme; and (2) Monotonic Integrated LES (MILES) with either a second-order upwind or QUICK scheme. These combinations were applied for an axisymmetric jet flow at Re ∼ 105, using an ‘engineering quality’ mesh, where the MILES model with either an upwind or QUICK scheme showed the best predictive capability.


  • A dynamic hybrid Reynolds-averaged Navier Stokes–Large eddy simulation modeling framework

    by S. Bhushan, D. K. Walters

    A dynamic framework for hybrid Reynolds-averaged Navier-Stokes (RANS)—large eddy simulation (LES) modeling is proposed, wherein the RANS-to-LES transition parameter is adjusted to maintain continuity in turbulence production. The model is applied for temporally developing plane channel flow at varying Reynolds numbers with different initial turbulence intensity and grid resolution. On sufficiently fine grids, dynamic hybrid RANS-LES model (DHRL) yields similar results to LES simulations. On coarse grids, DHRL activates RANS mode in the log layer, thus improving the mean flow predictions. The model framework addresses grid sensitivity issues observed in other hybrid RANS-LES approaches and may be used with any desired combination of LES and RANS basis models.


  • Efficient, Physiologically Realistic Lung Airflow Simulations

    by D. Keith Walters, Greg W. Burgreen, David M. Lavallee, David S. Thompson, Robert L. Hester

    One of the key challenges for computational fluid dynamics (CFD) simulations of human lung airflow is the sheer size and complexity of the complete, multiscale geometry of the bronchopulmonary tree. Since 3-D CFD simulations of the full airway tree are currently intractable, researchers have proposed reduced geometry models in which multiple airway paths are truncated downstream of the first few generations. This paper investigates a recently proposed method for closing the CFD model by application of physiologically correct boundary conditions at truncated outlets. A realistic, reduced geometry model of the lung airway based on CT data has been constructed up to generation 18, including extrathoracic, bronchi, and bronchiole regions. Results indicate that the new method yields reasonable results for pressure drop through the airway, at a small fraction of the cost of fully resolved simulations.


  • Computational Fluid Dynamics Simulations of Particle Deposition in Large-Scale, Multigenerational Lung Models

    by D. Keith Walters, William H. Luke

    Computational fluid dynamics (CFD) has emerged as a useful tool for the prediction of airflow and particle transport within the human lung airway. Several published studies have demonstrated the use of Eulerian finite-volume CFD simulations coupled with Lagrangian particle tracking methods to determine local and regional particle deposition rates in small subsections of the bronchopulmonary tree. However, the simulation of particle transport and deposition in large-scale models encompassing more than a few generations is less common, due in part to the sheer size and complexity of the human lung airway. Highly resolved, fully coupled flowfield solution and particle tracking in the entire lung, for example, is currently an intractable problem and will remain so for the foreseeable future. This paper adopts a previously reported methodology for simulating large-scale regions of the lung airway (Walters, D. K., and Luke, W. H., 2010, “A Method for Three-Dimensional Navier–Stokes Simulations of Large-Scale Regions of the Human Lung Airway ,” ASME J. Fluids Eng., 132(5), p. 051101), which was shown to produce results similar to fully resolved geometries using approximate, reduced geometry models. The methodology is extended here to particle transport and deposition simulations. Lagrangian particle tracking simulations are performed in combination with Eulerian simulations of the airflow in an idealized representation of the human lung airway tree. Results using the reduced models are compared with those using the fully resolved models for an eight-generation region of the conducting zone. The agreement between fully resolved and reduced geometry simulations indicates that the new method can provide an accurate alternative for large-scale CFD simulations while potentially reducing the computational cost of these simulations by several orders of magnitude.


  • A Method for Three-Dimensional Navier–Stokes Simulations of Large-Scale Regions of the Human Lung Airway

    by D. Keith Walters, William H. Luke

    A new methodology for CFD simulation of airflow in the human bronchopulmonary tree is presented. The new approach provides a means for detailed resolution of the flow features via three-dimensional Navier–Stokes CFD simulation without the need for full resolution of the entire flow geometry, which is well beyond the reach of available computing power now and in the foreseeable future. The method is based on a finite number of flow paths, each of which is fully resolved, to provide a detailed description of the entire complex small-scale flowfield. A stochastic coupling approach is used for the unresolved flow path boundary conditions, yielding a virtual flow geometry that allows accurate statistical resolution of the flow at all scales for any set of flow conditions. Results are presented for multigenerational lung models based on the Weibel morphology and the anatomical data of Hammersley and Olson (1992, “Physical Models of the Smaller Pulmonary Airways,” J. Appl. Physiol., 72(6), pp. 2402–2414). Validation simulations are performed for a portion of the bronchiole region (generations 4–12) using the flow path ensemble method, and compared with simulations that are geometrically fully resolved. Results are obtained for three inspiratory flowrates and compared in terms of pressure drop, flow distribution characteristics, and flow structure. Results show excellent agreement with the fully resolved geometry, while reducing the mesh size and computational cost by up to an order of magnitude.