Anders Rasmuson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Anders Rasmuson has a total of 66 co-authors. Here are the top co-authors by number of shared publications:
Muhammad Muzamal
Chalmers University of Technology
7 shared publicationsIngela Niklasson Björn
6 shared publicationsMohammad R. Tamadondar
Department of Chemistry and Chemical Engineering Chalmers University of Technology Gothenburg Sweden
5 shared publicationsPatric Kvist
Department of Chemistry and Chemical Engineering, Chalmers University of Technology, Gothenburg, Sweden
4 shared publicationsFarin Daryosh
3 shared publicationsKyrre Thalberg
3 shared publications
Latest Publications
- 14 October 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
Ultrasound velocity profiling of wood chips flow in an industrial application
Ultrasound velocity profiling (UVP) was applied to an industrial impregnation vessel containing wood chips and liquid. The method could successfully determine the velocity of the wood chips by measuring through the 15 mm thick steel wall. The measuring depth is and covers 8% of the radius. Even though the measuring depth is limited this method is able to capture the normal production variations of the mill. The velocity profiles of the wood chips show a non‐zero velocity at the wall, a sharp gradient (a shear zone), and a plug flow, indicating that it is reasonable to assume that wood chips behave as a dense granular flow on industrial scale.
- 14 October 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
Ultrasound velocity profiling of wood chips flow in an industrial application
Ultrasound velocity profiling (UVP) was applied to an industrial impregnation vessel containing wood chips and liquid. The method could successfully determine the velocity of the wood chips by measuring through the 15 mm thick steel wall. The measuring depth is and covers 8% of the radius. Even though the measuring depth is limited this method is able to capture the normal production variations of the mill. The velocity profiles of the wood chips show a non‐zero velocity at the wall, a sharp gradient (a shear zone), and a plug flow, indicating that it is reasonable to assume that wood chips behave as a dense granular flow on industrial scale.
- Open Access
- 5 January 2021
- Published by Wiley in AIChE Journal
- Vol. 67 (5)
The role of fine excipient particles in adhesive mixtures for inhalation
Despite the fact that adding fines improve the drug dispersion performance during inhalation, the scarcity of mechanistic insight into the formulation process, independent of the aerosolization, has kept the dispute on the underlying improvement mechanism open. We therefore simulate ternary formulations (carrier, drug, fines) in a vibrational cell to explore the mixing mechanism and the effect of particle size and loading ratio of fines on formulation performance. Results suggest that the buffer theory is a critical contributory mechanism since it curtails the carrier's collision rate and, therefore, decreases agglomerate breakage. Consequently, relatively larger drug aggregates are formed over the carrier, which eventually experiences greater detachment forces. A simple dispersion test is performed to evaluate drug detachment rate at wall‐collision. An excess of cohesive fines, or using larger fines, diminishes the rotational kinetic energy of coarse particles by lumping them together. This reduces drug agglomerate breakage and leads to poor mixing.
- 5 January 2021
- Published by Wiley in AIChE Journal
- Vol. 67 (5)
Open AccessThe role of fine excipient particles in adhesive mixtures for inhalation
Despite the fact that adding fines improve the drug dispersion performance during inhalation, the scarcity of mechanistic insight into the formulation process, independent of the aerosolization, has kept the dispute on the underlying improvement mechanism open. We therefore simulate ternary formulations (carrier, drug, fines) in a vibrational cell to explore the mixing mechanism and the effect of particle size and loading ratio of fines on formulation performance. Results suggest that the buffer theory is a critical contributory mechanism since it curtails the carrier's collision rate and, therefore, decreases agglomerate breakage. Consequently, relatively larger drug aggregates are formed over the carrier, which eventually experiences greater detachment forces. A simple dispersion test is performed to evaluate drug detachment rate at wall‐collision. An excess of cohesive fines, or using larger fines, diminishes the rotational kinetic energy of coarse particles by lumping them together. This reduces drug agglomerate breakage and leads to poor mixing.
- Open Access
- 26 May 2020
- Published by Springer Nature in Wood Science and Technology
- Vol. 54 (4) , 821-835
A multi-scale model for diffusion of large molecules in steam-exploded wood
In this paper, multi-scale modeling was used to resolve diffusion in steam-exploded wood at tracheid scales including sub-micrometer features of bordered pits. Simulations were performed using the lattice Boltzmann method with high-resolution X-ray tomography image data as the input for the microstructure. The results show an effective method for utilizing a variable diffusion coefficient to implement two length scales. This circumvents the need to resolve the bordered pits in detail, which requires massive computing power. Instead, the effective diffusion coefficient for one bordered pit is used as input for this model. Results based on the present model are comparable to experimental data. This methodology can be extended to more structural features at the microscale of wood, such as latewood and the cell wall. Obtaining a map of different diffusion coefficients based on features and scale gives a better overall understanding of diffusion and the importance of mass transport with regard to the pretreatment of wood.
- 26 May 2020
- Published by Springer Nature in Wood Science and Technology
- Vol. 54 (4) , 821-835
Open AccessA multi-scale model for diffusion of large molecules in steam-exploded wood
In this paper, multi-scale modeling was used to resolve diffusion in steam-exploded wood at tracheid scales including sub-micrometer features of bordered pits. Simulations were performed using the lattice Boltzmann method with high-resolution X-ray tomography image data as the input for the microstructure. The results show an effective method for utilizing a variable diffusion coefficient to implement two length scales. This circumvents the need to resolve the bordered pits in detail, which requires massive computing power. Instead, the effective diffusion coefficient for one bordered pit is used as input for this model. Results based on the present model are comparable to experimental data. This methodology can be extended to more structural features at the microscale of wood, such as latewood and the cell wall. Obtaining a map of different diffusion coefficients based on features and scale gives a better overall understanding of diffusion and the importance of mass transport with regard to the pretreatment of wood.
- 27 August 2019
- Published by Wiley in AIChE Journal
- Vol. 66 (1)
The effect of carrier surface roughness on wall collision‐induced detachment of micronized pharmaceutical particles
Repeated particle‐wall collisions are regarded as a contributory mechanism to the detachment of micronized pharmaceutical particles from carrier particles in inhaler devices. A natural and not much studied feature of these carrier particles are their surface roughness. In the present study, we simulate the collision‐induced dispersion behavior of dry‐coated rough particles by means of the discrete element method. Carrier particles with controllable length scales of roughness are generated based on the concept of Fourier shape descriptors. The dispersion efficiency correlates well with the statistical measures of the surface asperities. Moreover, the collision energy is found to contribute to the degree of fine particle detachment. At the rebound, it is observed that the majority of remaining fine particles fall into the particle cavities and establish multiple contacts with the carrier surface. These results corroborate with experimental findings and emphasize the significant effect of surface asperities in the context of inhalable particles.
- 27 August 2019
- Published by Wiley in AIChE Journal
- Vol. 66 (1)
The effect of carrier surface roughness on wall collision‐induced detachment of micronized pharmaceutical particles
Repeated particle‐wall collisions are regarded as a contributory mechanism to the detachment of micronized pharmaceutical particles from carrier particles in inhaler devices. A natural and not much studied feature of these carrier particles are their surface roughness. In the present study, we simulate the collision‐induced dispersion behavior of dry‐coated rough particles by means of the discrete element method. Carrier particles with controllable length scales of roughness are generated based on the concept of Fourier shape descriptors. The dispersion efficiency correlates well with the statistical measures of the surface asperities. Moreover, the collision energy is found to contribute to the degree of fine particle detachment. At the rebound, it is observed that the majority of remaining fine particles fall into the particle cavities and establish multiple contacts with the carrier surface. These results corroborate with experimental findings and emphasize the significant effect of surface asperities in the context of inhalable particles.
- Open Access
- 20 June 2019
- Published by Springer Nature in Wood Science and Technology
- Vol. 53 (4) , 855-871
Lattice Boltzmann simulations of diffusion in steam-exploded wood
- 20 June 2019
- Published by Springer Nature in Wood Science and Technology
- Vol. 53 (4) , 855-871
Open AccessLattice Boltzmann simulations of diffusion in steam-exploded wood
- 1 March 2019
- Published by Elsevier in Powder Technology
- Vol. 345, 796-803
The morphology of the deposited particles after a wet agglomerate normal surface impact
- 1 March 2019
- Published by Elsevier in Powder Technology
- Vol. 345, 796-803
The morphology of the deposited particles after a wet agglomerate normal surface impact
- 23 February 2019
- Published by Wiley in AIChE Journal
- Vol. 65 (6)
Agglomerate breakage and adhesion upon impact with complex‐shaped particles
Understanding the breakage and adhesion of an agglomerate upon collision with a target particle is a primary step to fathom the adhesive mixing process. While the effect of several variables, such as collision velocity and particle interface energy, on collision behavior has been explored, the effects of target particle morphology have yet to be revealed. In this work, we generate three‐dimensional particles with controllable shape and texture using Fourier harmonics and, using the discrete element method, we examine the collision of an agglomerate that impacts each target particle. Results show that the agglomerate breakage depends on the local curvature in the impact zone. We observe that the asperity and elongation factors of the target particle largely contribute to the extent of the deposition of fine particles and the size and number of generated fragments after impact, respectively. These results reveal the large potential error when approximating real particles as smooth spheres in fragmentation studies.
- 23 February 2019
- Published by Wiley in AIChE Journal
- Vol. 65 (6)
Agglomerate breakage and adhesion upon impact with complex‐shaped particles
Understanding the breakage and adhesion of an agglomerate upon collision with a target particle is a primary step to fathom the adhesive mixing process. While the effect of several variables, such as collision velocity and particle interface energy, on collision behavior has been explored, the effects of target particle morphology have yet to be revealed. In this work, we generate three‐dimensional particles with controllable shape and texture using Fourier harmonics and, using the discrete element method, we examine the collision of an agglomerate that impacts each target particle. Results show that the agglomerate breakage depends on the local curvature in the impact zone. We observe that the asperity and elongation factors of the target particle largely contribute to the extent of the deposition of fine particles and the size and number of generated fragments after impact, respectively. These results reveal the large potential error when approximating real particles as smooth spheres in fragmentation studies.
- 1 December 2018
- Published by Elsevier in Powder Technology
- Vol. 340, 173-180
Incrustation of wet dirt on glass surfaces through convective drying
- 1 December 2018
- Published by Elsevier in Powder Technology
- Vol. 340, 173-180
Incrustation of wet dirt on glass surfaces through convective drying
- 1 October 2018
- Published by Elsevier in Powder Technology
- Vol. 338, 313-324
The influence of particle interfacial energies and mixing energy on the mixture quality of the dry-coating process
- 1 October 2018
- Published by Elsevier in Powder Technology
- Vol. 338, 313-324
The influence of particle interfacial energies and mixing energy on the mixture quality of the dry-coating process
- Open Access
- 25 July 2018
- Published by Springer Nature in Wood Science and Technology
- Vol. 52 (5) , 1395-1410
Using fluorescent probes and FRAP to investigate macromolecule diffusion in steam-exploded wood
- 25 July 2018
- Published by Springer Nature in Wood Science and Technology
- Vol. 52 (5) , 1395-1410
Open AccessUsing fluorescent probes and FRAP to investigate macromolecule diffusion in steam-exploded wood