M. Reza Eslami
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
M. Reza Eslami has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
A. Bagri
Amirkabir University of Technology , Tehran, Iran
2 shared publicationsArash Zamani
Amirkabir University of Technology , Tehran, Iran
1 shared publication- Arash Zamani
Mechanical Engineering Department, Amirkabir University of Technology, Tehran 15914, Iran
1 shared publication B. Mirzavand
Amirkabir University of Technology , Tehran, Iran
1 shared publicationFariborz Heidary
Mechanical Engineering Department, Science and Research Campus , Azad University , Tehran, Iran
1 shared publicationH. Taheri
Mechanical Engineering Department , Amirkabir University of Technology , Tehran , Iran
1 shared publication
Latest Publications
- 1 March 2012
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 213-216, 266-288
Gradient-enhanced damage modeling of cracked bodies by reproducing kernel element method
- 1 March 2012
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 213-216, 266-288
Gradient-enhanced damage modeling of cracked bodies by reproducing kernel element method
- 4 June 2010
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 33 (7) , 646-660
Dynamic Thermal Postbuckling Analysis of Piezoelectric Functionally Graded Cylindrical Shells
Dynamic thermal postbuckling behavior of functionally graded cylindrical shells with surface-bonded piezoelectric actuators subjected to the combined action of thermal load and applied actuator voltage is analyzed using an incremental numerical technique. The shell is graded across the thickness according to a power law form function. The material properties of the functionally graded cylindrical shells are considered to be temperature dependent. The theoretical formulations are based on the classical shell theory with Sanders' nonlinear kinematic relations. Then, using Hamilton's principle, equations of motion are derived for the piezoelectric FGM cylindrical shell. A finite difference based method combined with the Runge–Kutta method is employed to predict the postbuckling equilibrium paths, and the dynamic buckling temperature difference is detected according to Budiansky's stability criterion. Numerical results are presented to demonstrate the effects of the applied actuator voltage, shell geometry, volume fraction exponent of FGM, and the temperature dependency of the material properties on the postbuckling behavior of the shell. The results for simpler states are validated with the known data in the literature.
- 4 June 2010
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 33 (7) , 646-660
Dynamic Thermal Postbuckling Analysis of Piezoelectric Functionally Graded Cylindrical Shells
Dynamic thermal postbuckling behavior of functionally graded cylindrical shells with surface-bonded piezoelectric actuators subjected to the combined action of thermal load and applied actuator voltage is analyzed using an incremental numerical technique. The shell is graded across the thickness according to a power law form function. The material properties of the functionally graded cylindrical shells are considered to be temperature dependent. The theoretical formulations are based on the classical shell theory with Sanders' nonlinear kinematic relations. Then, using Hamilton's principle, equations of motion are derived for the piezoelectric FGM cylindrical shell. A finite difference based method combined with the Runge–Kutta method is employed to predict the postbuckling equilibrium paths, and the dynamic buckling temperature difference is detected according to Budiansky's stability criterion. Numerical results are presented to demonstrate the effects of the applied actuator voltage, shell geometry, volume fraction exponent of FGM, and the temperature dependency of the material properties on the postbuckling behavior of the shell. The results for simpler states are validated with the known data in the literature.
- 17 September 2009
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 32 (10) , 969-985
Coupled Dynamical Thermoelasticity of a Functionally Graded Cracked Layer
The effect of thermal shock on a cracked FGM layer is analized using the Galerkin finite element method. The thermoelasticity equations are assumed in the classical form and the effect of thermal-mechanical coupling in the energy equation is included in the calculations. The eight node rectangular element is used and the nodes near the crack tip are replaced to introduce the crack tip singularity. The coupled dynamical system of equations obtained from the finite element discretization are solved by the Newmark method in the time domain. The domain form of the J integral is then employed to calculate the dynamical thermal stress intensity factors at each instance of time. A computer program in C+ + environment is developed to do the different stages of calculations from mesh generation to numerical calculation of the J integral. Some numerical examples are implemented to investigate the validity and accuracy of the written computer program to simulate the shock phenomena on a functionally graded cracked body.
- 17 September 2009
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 32 (10) , 969-985
Coupled Dynamical Thermoelasticity of a Functionally Graded Cracked Layer
The effect of thermal shock on a cracked FGM layer is analized using the Galerkin finite element method. The thermoelasticity equations are assumed in the classical form and the effect of thermal-mechanical coupling in the energy equation is included in the calculations. The eight node rectangular element is used and the nodes near the crack tip are replaced to introduce the crack tip singularity. The coupled dynamical system of equations obtained from the finite element discretization are solved by the Newmark method in the time domain. The domain form of the J integral is then employed to calculate the dynamical thermal stress intensity factors at each instance of time. A computer program in C+ + environment is developed to do the different stages of calculations from mesh generation to numerical calculation of the J integral. Some numerical examples are implemented to investigate the validity and accuracy of the written computer program to simulate the shock phenomena on a functionally graded cracked body.
- 10 October 2007
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 30 (12) , 1175-1193
Analysis of Thermoelastic Waves in Functionally Graded Hollow Spheres Based on the Green-Lindsay Theory
In this article, the Green–Lindsay theory of thermoelasticity is employed to study the thermoelastic response of functionally graded hollow spheres. This generalized coupled thermoelasticity theory admits the second sound phenomena and depicts a finite speed for temperature wave propagation. The materials of the hollow sphere are assumed to be graded through its thickness in the radial direction while a symmetric thermal shock load is applied to its boundary. The Galerkin finite element method via the Laplace transformation is used to solve the coupled form of governing equations. A numerical inversion of the Laplace transform is employed to obtain the results in time domain. Using the obtained solution, the temperature, displacement, radial stress, and hoop stress waves propagation are studied. Also the material distribution effects on temperature, displacement and stresses are investigated. Finally, the obtained results for the Green–Lindsay theory are compared with the results of classical thermoelasticity theory.
- 10 October 2007
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 30 (12) , 1175-1193
Analysis of Thermoelastic Waves in Functionally Graded Hollow Spheres Based on the Green-Lindsay Theory
In this article, the Green–Lindsay theory of thermoelasticity is employed to study the thermoelastic response of functionally graded hollow spheres. This generalized coupled thermoelasticity theory admits the second sound phenomena and depicts a finite speed for temperature wave propagation. The materials of the hollow sphere are assumed to be graded through its thickness in the radial direction while a symmetric thermal shock load is applied to its boundary. The Galerkin finite element method via the Laplace transformation is used to solve the coupled form of governing equations. A numerical inversion of the Laplace transform is employed to obtain the results in time domain. Using the obtained solution, the temperature, displacement, radial stress, and hoop stress waves propagation are studied. Also the material distribution effects on temperature, displacement and stresses are investigated. Finally, the obtained results for the Green–Lindsay theory are compared with the results of classical thermoelasticity theory.
- 1 August 2006
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 29 (8) , 771-790
Thermal Instability of Functionally Graded Shallow Spherical Shell
In this paper, thermal instability of shallow spherical shells made of functionally graded material (FGM) is considered. The governing equations for a thin spherical shell based on the Donnell–Mushtari–Vlasov theory are obtained. The equations are derived using the Sanders simplified kinematic relations and variational method. It is assumed that the mechanical properties vary linearly through the shell thickness. The constituent material of the functionally graded shell is assumed to be a mixture of ceramic and metal. Analytical solutions are obtained for three types of thermal loading including Uniform Temperature Rise (UTR), Linear Radial Temperature (LRT), and Nonlinear Radial Temperature (NRT). The results are validated with the known data in the literature.
- 1 August 2006
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 29 (8) , 771-790
Thermal Instability of Functionally Graded Shallow Spherical Shell
In this paper, thermal instability of shallow spherical shells made of functionally graded material (FGM) is considered. The governing equations for a thin spherical shell based on the Donnell–Mushtari–Vlasov theory are obtained. The equations are derived using the Sanders simplified kinematic relations and variational method. It is assumed that the mechanical properties vary linearly through the shell thickness. The constituent material of the functionally graded shell is assumed to be a mixture of ceramic and metal. Analytical solutions are obtained for three types of thermal loading including Uniform Temperature Rise (UTR), Linear Radial Temperature (LRT), and Nonlinear Radial Temperature (NRT). The results are validated with the known data in the literature.
- 1 April 2006
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 29 (4) , 359-370
Generalized Coupled Thermoelasticity of a Layer
The generalized thermoelasticity based on the Lord-Shulman (LS), Green-Lindsay (GL), and Green-Naghdi (GN) theories admit the second sound effect. By introducing some parameters all these theories are combined and a unified set of equations is rendered. These equations are then solved for a layer of isotropic and homogeneous material to study the thermal and mechanical wave propagations. The disturbances are generated by a sudden application of temperature to the boundary. The non-dimensionalized form of the governing equations are solved utilizing the Laplace transform method in time domain. Closed form solutions are obtained for the layer in Laplace transform domain, and a numerical inverse Laplace transform method is used to obtain the temperature, displacement, and stress fields in the physical time domain. The thermo-mechanical wave propagations and reflections from the layer boundaries are investigated.
- 1 April 2006
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 29 (4) , 359-370
Generalized Coupled Thermoelasticity of a Layer
The generalized thermoelasticity based on the Lord-Shulman (LS), Green-Lindsay (GL), and Green-Naghdi (GN) theories admit the second sound effect. By introducing some parameters all these theories are combined and a unified set of equations is rendered. These equations are then solved for a layer of isotropic and homogeneous material to study the thermal and mechanical wave propagations. The disturbances are generated by a sudden application of temperature to the boundary. The non-dimensionalized form of the governing equations are solved utilizing the Laplace transform method in time domain. Closed form solutions are obtained for the layer in Laplace transform domain, and a numerical inverse Laplace transform method is used to obtain the temperature, displacement, and stress fields in the physical time domain. The thermo-mechanical wave propagations and reflections from the layer boundaries are investigated.
- 23 February 2005
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 28 (3) , 285-300
PYROELECTRIC EFFECT ON DYNAMIC RESPONSE OF COUPLED DISTRIBUTED PIEZOTHERMOELASTIC COMPOSITE PLATE
The equations governing the linear response of a coupled piezothermoelastic composite plate, considering the pyroelectric effect, are outlined. The finite element method with linear shape functions for a first-order shear deformation theory of laminated plates is used to obtain the deflections and temperature. The finite element equations are developed for a piezothermoelectric sensor and actuator. The governing equations are solved using the time-marching method. Numerical results are presented for the conventional active direct proportional control of the plate. Controlled and uncontrolled displacements and temperature responses are graphically illustrated. The corresponding temperature response with consideration of the pyroelectric effects is also presented. Dynamic case studies are carried out to observe the pyroelectric effects in the piezothermoelastic control systems.
- 23 February 2005
- Published by Taylor & Francis in Journal of Thermal Stresses
- Vol. 28 (3) , 285-300
PYROELECTRIC EFFECT ON DYNAMIC RESPONSE OF COUPLED DISTRIBUTED PIEZOTHERMOELASTIC COMPOSITE PLATE
The equations governing the linear response of a coupled piezothermoelastic composite plate, considering the pyroelectric effect, are outlined. The finite element method with linear shape functions for a first-order shear deformation theory of laminated plates is used to obtain the deflections and temperature. The finite element equations are developed for a piezothermoelectric sensor and actuator. The governing equations are solved using the time-marching method. Numerical results are presented for the conventional active direct proportional control of the plate. Controlled and uncontrolled displacements and temperature responses are graphically illustrated. The corresponding temperature response with consideration of the pyroelectric effects is also presented. Dynamic case studies are carried out to observe the pyroelectric effects in the piezothermoelastic control systems.