Ana Mantecón
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ana Mantecón has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Angels Serra
Universitat Rovira i Virgili, Department of Analytical and Organic Chemistry, C/Marcel·lí Domingo 1, 43007 Tarragona, Spain
4 shared publications J. Ruiz
Universitat Rovira i Virgili, Departament de Química Analítica i Química Orgànica, Facultat de Química, Plaça Imperial Tàrraco 1, 43005 Tarragona, Spain
3 shared publicationsDavid Ribera
Departament de Química Analítica i Química Orgànica, Universitat Rovira i Virgili, Plaça Imperial Tarraco 1, 43005 Tarragona, Spain
2 shared publications- Virginia Cádiz
Departament de Química Analítica i Química Orgánica, Universitat Rovira i Virgili, Marcel.li Domingo s/n, 43007 Tarragona, Spain
2 shared publications Cristina Mas
Departament de Química Analítica i Química Orgànica, Universitat Rovira i Virgili, Plaça Imperial Tarraco 1, 43005 Tarragona, Spain
1 shared publicationD. Ribera
Department de Química Analítica i Química Orgànica, Universitat Rovira i Virgili, Plaça Imperial Tàrraco 1, 43005 Tarragona, Spain
1 shared publication
Latest Publications
- 22 June 2004
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 42 (15) , 3782-3791
Influence of lanthanide triflate compounds on formation of networks from DGEBA and γ‐butyrolactone
Diglycidylether of bisphenol A (DGEBA) was cured with γ‐butyrolactone (γ‐BL) using different lanthanide triflates as catalysts. Fourier transform infrared spectroscopy was used to study the different evolutions of the four elemental processes that took place during curing with lanthanum and ytterbium triflates. The greatest differences among the lanthanides were in oxophilicity and Lewis acidity. Differences in the coordination ability of the metal to the monomers were shown and according to the Pearson theory, were related to their different characteristics. Differences in the reactivity of the systems were related to the differences in the Lewis acidity of the initiators. The evolution of the contraction during curing using different lanthanide triflates was monitored by thermomechanical analysis. All systems showed that contraction took place in two stages and that there was an intermediate region, associated with gelation, with no contraction. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3782–3791, 2004
- 22 June 2004
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 42 (15) , 3782-3791
Influence of lanthanide triflate compounds on formation of networks from DGEBA and γ‐butyrolactone
Diglycidylether of bisphenol A (DGEBA) was cured with γ‐butyrolactone (γ‐BL) using different lanthanide triflates as catalysts. Fourier transform infrared spectroscopy was used to study the different evolutions of the four elemental processes that took place during curing with lanthanum and ytterbium triflates. The greatest differences among the lanthanides were in oxophilicity and Lewis acidity. Differences in the coordination ability of the metal to the monomers were shown and according to the Pearson theory, were related to their different characteristics. Differences in the reactivity of the systems were related to the differences in the Lewis acidity of the initiators. The evolution of the contraction during curing using different lanthanide triflates was monitored by thermomechanical analysis. All systems showed that contraction took place in two stages and that there was an intermediate region, associated with gelation, with no contraction. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3782–3791, 2004
- 7 July 2003
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 41 (16) , 2521-2530
Liquid‐crystalline thermosets by the curing of dimeric liquid‐crystalline epoxyimine monomers with 2,4‐toluene diisocyanate
We studied the curing processes of several series of dimeric liquid‐crystalline epoxyimine monomers with 2,4‐toluene diisocyanate (TDI) alone or with added catalytic proportions of 4‐(N,N‐dimethylamino)pyridine. We obtained isotropic materials or liquid‐crystalline thermosets with different degrees of order, which depended on the structures of the monomers. To fix ordered networks, we had to do the curing in two steps when TDI was used alone as the curing agent. However, when a tertiary amine was added in catalytic proportions, the ordered networks were fixed in just one step. In this way, we were able to fix both nematic and smectic mesophases. The significance of the polarization of the mesogen for obtaining liquid‐crystalline thermosets was demonstrated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2521–2530, 2003
- 7 July 2003
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 41 (16) , 2521-2530
Liquid‐crystalline thermosets by the curing of dimeric liquid‐crystalline epoxyimine monomers with 2,4‐toluene diisocyanate
We studied the curing processes of several series of dimeric liquid‐crystalline epoxyimine monomers with 2,4‐toluene diisocyanate (TDI) alone or with added catalytic proportions of 4‐(N,N‐dimethylamino)pyridine. We obtained isotropic materials or liquid‐crystalline thermosets with different degrees of order, which depended on the structures of the monomers. To fix ordered networks, we had to do the curing in two steps when TDI was used alone as the curing agent. However, when a tertiary amine was added in catalytic proportions, the ordered networks were fixed in just one step. In this way, we were able to fix both nematic and smectic mesophases. The significance of the polarization of the mesogen for obtaining liquid‐crystalline thermosets was demonstrated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2521–2530, 2003
- 3 April 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 88 (13) , 3026-3031
Network characterization and swelling behavior of chemical hydrogels based on acid‐containing poly(vinyl alcohol)
- 3 April 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 88 (13) , 3026-3031
Network characterization and swelling behavior of chemical hydrogels based on acid‐containing poly(vinyl alcohol)
- 27 March 2003
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 41 (10) , 1465-1477
Dimeric liquid‐crystalline epoxyimine monomers: Influence of dipolar moments on mesomorphic behavior and the formation of liquid‐crystalline thermosets
We examine some of the structural aspects that influence the mesomorphic behavior of liquid‐crystalline dimeric epoxy resins with imine groups in the mesogens. We synthesized two new series of monomers and compared them with previously synthesized monomers. Compared with previously studied series, the imine group in the new monomers is oriented differently with respect to the ether and ester groups linked to the end of the mesogenic unit. Our results confirmed the importance of polarization of the mesogenic groups and the presence of an ester group in the inner position in the formation of smectic mesophases. By curing with primary and tertiary amines, we demonstrate that these two requirements are necessary if liquid‐crystalline thermosets are to be obtained with different degrees of order. These studies were carried out with differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1465–1477, 2003
- 27 March 2003
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 41 (10) , 1465-1477
Dimeric liquid‐crystalline epoxyimine monomers: Influence of dipolar moments on mesomorphic behavior and the formation of liquid‐crystalline thermosets
We examine some of the structural aspects that influence the mesomorphic behavior of liquid‐crystalline dimeric epoxy resins with imine groups in the mesogens. We synthesized two new series of monomers and compared them with previously synthesized monomers. Compared with previously studied series, the imine group in the new monomers is oriented differently with respect to the ether and ester groups linked to the end of the mesogenic unit. Our results confirmed the importance of polarization of the mesogenic groups and the presence of an ester group in the inner position in the formation of smectic mesophases. By curing with primary and tertiary amines, we demonstrate that these two requirements are necessary if liquid‐crystalline thermosets are to be obtained with different degrees of order. These studies were carried out with differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1465–1477, 2003
- 19 November 2002
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 87 (4) , 693-698
Hydrogels from glycidyl derivatives of poly(vinyl alcohol)
- 19 November 2002
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 87 (4) , 693-698
Hydrogels from glycidyl derivatives of poly(vinyl alcohol)
- 1 October 2002
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 40 (22) , 3916-3926
Liquid‐crystalline thermosets from mesogenic dimeric epoxy resins by tertiary amine catalysis
Liquid‐crystalline thermosets (LCTs) were prepared by the curing of difunctional liquid‐crystalline dimeric epoxy monomers with imine moieties in the mesogenic core and central spacers of different lengths. Tertiary amines were used as catalysts in different proportions. The locked mesophases of the LCTs were characterized by polarized optical microscopy and wide‐angle X‐ray scattering and identified as smectic‐C, regardless of their smectic‐A or smectic‐C initial state. The influence of a 7.1‐T magnetic field on the macroscopic orientation of these materials was studied by dynamic mechanical analysis, and the orientation parameter was determined by IR dichroism. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3916–3926, 2002
- 1 October 2002
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 40 (22) , 3916-3926
Liquid‐crystalline thermosets from mesogenic dimeric epoxy resins by tertiary amine catalysis
Liquid‐crystalline thermosets (LCTs) were prepared by the curing of difunctional liquid‐crystalline dimeric epoxy monomers with imine moieties in the mesogenic core and central spacers of different lengths. Tertiary amines were used as catalysts in different proportions. The locked mesophases of the LCTs were characterized by polarized optical microscopy and wide‐angle X‐ray scattering and identified as smectic‐C, regardless of their smectic‐A or smectic‐C initial state. The influence of a 7.1‐T magnetic field on the macroscopic orientation of these materials was studied by dynamic mechanical analysis, and the orientation parameter was determined by IR dichroism. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3916–3926, 2002
- 27 September 2002
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 40 (22) , 3893-3908
Synthesis and crosslinking of vinyl‐terminated biphenyl and naphthalene liquid‐crystalline poly(epichlorohydrin) derivatives: Effect of nonmesogenic nonvinylic units on the mesogenic properties
Two series of vinyl‐terminated side‐chain liquid‐crystalline polyethers containing ethylene oxide or glycidyl aromatic carboxylates as spacers were synthesized. The mesogenic cores were 4,4′‐biphenyl or 2,6‐naphthalene moieties. The polymers were synthesized by chemically modifying poly(epichlorohydrin) or poly(epichlorohydrin)‐poly(ethylene oxide) with the corresponding mesogenic carboxylic acids or with mixtures of these acids and the nonmesogenic non‐crosslinkable analogous 4‐biphenyl‐ and 2‐naphthalenecarboxylic acids. In most cases the degree of modification achieved was higher than 90%. The polymers were characterized by chlorine analysis, IR, and 1H and 13C NMR spectroscopies; viscosimetry; size exclusion chromatography; multi‐angle laser light scattering; and thermogravimetric analysis. The liquid‐crystal behavior, shown by most polymers, was examined by differential scanning calorimetry, polarized optical microscopy (POM), and X‐ray diffraction on mechanically oriented samples. The crosslinking of most polymers was done by peroxide‐type initiators that led to liquid‐crystal thermosets or elastomers. The freezing of the mesophase organization on the crosslinked materials was confirmed by POM and X‐ray diffraction. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3893–3908, 2002
- 27 September 2002
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 40 (22) , 3893-3908
Synthesis and crosslinking of vinyl‐terminated biphenyl and naphthalene liquid‐crystalline poly(epichlorohydrin) derivatives: Effect of nonmesogenic nonvinylic units on the mesogenic properties
Two series of vinyl‐terminated side‐chain liquid‐crystalline polyethers containing ethylene oxide or glycidyl aromatic carboxylates as spacers were synthesized. The mesogenic cores were 4,4′‐biphenyl or 2,6‐naphthalene moieties. The polymers were synthesized by chemically modifying poly(epichlorohydrin) or poly(epichlorohydrin)‐poly(ethylene oxide) with the corresponding mesogenic carboxylic acids or with mixtures of these acids and the nonmesogenic non‐crosslinkable analogous 4‐biphenyl‐ and 2‐naphthalenecarboxylic acids. In most cases the degree of modification achieved was higher than 90%. The polymers were characterized by chlorine analysis, IR, and 1H and 13C NMR spectroscopies; viscosimetry; size exclusion chromatography; multi‐angle laser light scattering; and thermogravimetric analysis. The liquid‐crystal behavior, shown by most polymers, was examined by differential scanning calorimetry, polarized optical microscopy (POM), and X‐ray diffraction on mechanically oriented samples. The crosslinking of most polymers was done by peroxide‐type initiators that led to liquid‐crystal thermosets or elastomers. The freezing of the mesophase organization on the crosslinked materials was confirmed by POM and X‐ray diffraction. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3893–3908, 2002
- 6 June 2002
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 85 (8) , 1644-1651
Investigation of loading and release in PVA‐based hydrogels
We used Methylene Blue (MB) and Methyl Orange (MO) as model drugs to investigate the controlled release behavior of hydrogels from poly(vinyl alcohol) crosslinked with ethylenediaminetetraacetic dianhydride. The cationic or anionic character of these compounds and the molecular weight between crosslinks of the hydrogel and the concentration of ionizable groups in the hydrogel greatly affected the loading and release of the drugs. MB loading was favored, therefore, by a higher content of negative charges in the hydrogel, although this implied a greater degree of crosslinking and, therefore, a lower mesh size. On the other hand, the overall loading of negative MO, favored by a higher mesh size, was very low because of unfavorable interactions with the electrolyte charges. Release studies showed that one of the parameters that most affected the drug release behavior of these hydrogels was the pH of the solution. MB and MO were not completely released, even at pH 1. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1644– 1651, 2002.
- 6 June 2002
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 85 (8) , 1644-1651
Investigation of loading and release in PVA‐based hydrogels
We used Methylene Blue (MB) and Methyl Orange (MO) as model drugs to investigate the controlled release behavior of hydrogels from poly(vinyl alcohol) crosslinked with ethylenediaminetetraacetic dianhydride. The cationic or anionic character of these compounds and the molecular weight between crosslinks of the hydrogel and the concentration of ionizable groups in the hydrogel greatly affected the loading and release of the drugs. MB loading was favored, therefore, by a higher content of negative charges in the hydrogel, although this implied a greater degree of crosslinking and, therefore, a lower mesh size. On the other hand, the overall loading of negative MO, favored by a higher mesh size, was very low because of unfavorable interactions with the electrolyte charges. Release studies showed that one of the parameters that most affected the drug release behavior of these hydrogels was the pH of the solution. MB and MO were not completely released, even at pH 1. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1644– 1651, 2002.
- 30 April 1996
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 34 (6) , 925-934
Modification of poly(vinyl alcohol) with acid chlorides and crosslinking with difunctional hardeners
- 30 April 1996
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 34 (6) , 925-934
Modification of poly(vinyl alcohol) with acid chlorides and crosslinking with difunctional hardeners