Massimiliano Ricci
Research Subjects
Research Interests
Massimiliano Ricci has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Ugo Covani
Saint Camillus International University of Health Sciences (UniCamillus), 00131 Rome, Italy
10 shared publications - Antonio Barone
Department of Surgical, Medical, Molecular Pathology and of the Critical Area, University of Pisa, 56126 Pisa, Italy
7 shared publications - Francesco Mangano
Department of Pediatric, Preventive Dentistry and Orthodontics, I. M. Sechenov First State Medical University, Moscow, Russia
4 shared publications A. Genovesi
Istituto Stomatologico Tirreno, Versilia Hospital, Camaiore (Lu), Italy
3 shared publications- Paolo Tonelli
University of Florence, Italy
3 shared publications Am Genovesi
Istituto Stomatologico Tirreno Versilia General Hospital Camaiore Italy
2 shared publications
Latest Publications
- 14 January 2014
Comparison between oscillating-twisting rotating of brush head vs a characteristic sweeping bristles motion on reducing oral inflammation.
Background: The aim of present study was to clinically assess and compare a sonic toothbrush versus a rotating oscillating power toothbrush on plaque removal and gingival health in reducing plaque and bleeding on probing. Methods: Patients were selected according to specific inclusion and exclusion criteria and they were enrolled in test group or control group using Random Allocation Software. Visual score plaque index (PI) was recorded by the same blind operator using a plaque revelator and bleeding on probing (BoP) index was recorded using a periodontal probe at baseline, 15th day and 30th day. Results: The group of patients who used sonic toothbrush showed a greater reduction of PI and BoP comparing with patients who used rotating-oscillating power toothbrush. Conclusions: Although this pilot study has several limitations, it seems to indicate that sonic toothbrushes are capable of removing plaque and reducing bleeding on probing better than electric toothbrushes.
- 14 January 2014
Comparison between oscillating-twisting rotating of brush head vs a characteristic sweeping bristles motion on reducing oral inflammation.
Background: The aim of present study was to clinically assess and compare a sonic toothbrush versus a rotating oscillating power toothbrush on plaque removal and gingival health in reducing plaque and bleeding on probing. Methods: Patients were selected according to specific inclusion and exclusion criteria and they were enrolled in test group or control group using Random Allocation Software. Visual score plaque index (PI) was recorded by the same blind operator using a plaque revelator and bleeding on probing (BoP) index was recorded using a periodontal probe at baseline, 15th day and 30th day. Results: The group of patients who used sonic toothbrush showed a greater reduction of PI and BoP comparing with patients who used rotating-oscillating power toothbrush. Conclusions: Although this pilot study has several limitations, it seems to indicate that sonic toothbrushes are capable of removing plaque and reducing bleeding on probing better than electric toothbrushes.
- 1 May 2013
- Published by Elsevier in Dental Cadmos
- Vol. 81 (6) , 345-350
L’ozonoterapia nella riduzione dell’edema a seguito di interventi di piccola chirurgia orale: studio clinico randomizzato
- 1 May 2013
- Published by Elsevier in Dental Cadmos
- Vol. 81 (6) , 345-350
L’ozonoterapia nella riduzione dell’edema a seguito di interventi di piccola chirurgia orale: studio clinico randomizzato
- 1 February 2013
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. 39 (1) , 103-109
Fracture of Anterior Iliac Crest Following Bone Graft Harvest in an Anorexic Patient: Case Report and Review of the Literature
In the treatment of jaw bone atrophies, autologus bone is still considered the gold standard because of its excellent osteoconductive, osteoinductive, and osteogenetic proprieties and lack of immunogenicity, which allow better graft integration and stability. Although various donor sites are available, the iliac crest represents the best source of corticocancellous bone, and literature suggests that it has low morbidity. However, this case report emphasizes that patients with systemic diseases such as anorexia should be carefully evaluated before such an operation, because unfavorable bone conditions may jeopardize the outcome. A 47-year-old woman needing rehabilitation of the upper arch was considered for iliac crest harvesting. She stated that she had suffered from anorexia for 30 years. A corticocancellous block was harvested by a bone saw using an anterolateral approach to the outer table of the right anterior iliac crest. The postoperative course was uneventful, but 13 days later, she complained of a sudden pain in the operated area, and X rays revealed a fracture of the anterior iliac crest. So far, the literature has mentioned 50 cases of iliac crest fractures after bone harvesting, and 28 cases among these are due to harvesting in the anterior part of the iliac crest. Several factors seem to be responsible for this complication, including the area of harvesting, residual bone thickness, technique used, and age and gender of the patient. To our knowledge, our case is the first of hip fracture after bone harvesting in a patient suffering from anorexia. Both low weight and osteoporosis are probably responsible for this complication. In our opinion, patients suffering from anorexia should be considered at risk for bone harvesting, and an appropriate mini-invasive surgical technique should be carried out instead.
- 1 February 2013
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. 39 (1) , 103-109
Fracture of Anterior Iliac Crest Following Bone Graft Harvest in an Anorexic Patient: Case Report and Review of the Literature
In the treatment of jaw bone atrophies, autologus bone is still considered the gold standard because of its excellent osteoconductive, osteoinductive, and osteogenetic proprieties and lack of immunogenicity, which allow better graft integration and stability. Although various donor sites are available, the iliac crest represents the best source of corticocancellous bone, and literature suggests that it has low morbidity. However, this case report emphasizes that patients with systemic diseases such as anorexia should be carefully evaluated before such an operation, because unfavorable bone conditions may jeopardize the outcome. A 47-year-old woman needing rehabilitation of the upper arch was considered for iliac crest harvesting. She stated that she had suffered from anorexia for 30 years. A corticocancellous block was harvested by a bone saw using an anterolateral approach to the outer table of the right anterior iliac crest. The postoperative course was uneventful, but 13 days later, she complained of a sudden pain in the operated area, and X rays revealed a fracture of the anterior iliac crest. So far, the literature has mentioned 50 cases of iliac crest fractures after bone harvesting, and 28 cases among these are due to harvesting in the anterior part of the iliac crest. Several factors seem to be responsible for this complication, including the area of harvesting, residual bone thickness, technique used, and age and gender of the patient. To our knowledge, our case is the first of hip fracture after bone harvesting in a patient suffering from anorexia. Both low weight and osteoporosis are probably responsible for this complication. In our opinion, patients suffering from anorexia should be considered at risk for bone harvesting, and an appropriate mini-invasive surgical technique should be carried out instead.
- Open Access
- 1 January 2013
- Published by Medknow in Contemporary Clinical Dentistry
- Vol. 4 (1) , 13-9
The use of bone block allografts in sinus augmentation, followed by delayed implant placement: A case series
Purpose: This article reports the clinical outcomes observed in a large number of patients receiving block bone allograft used for sinus augmentation and delayed implant placement. Patients and Methods: In total, 28 patients (13 males) with a mean age of 49.8 ± 10.1 years (range: 33-67 years) were included in this case series. All selected patients suffered from severe alveolar ridge atrophy in the posterior maxilla and required bone augmentation procedures, followed by implant placement after 6 months. All patients were followed for 18 months after the grafting, with scheduled monthly visits and/or more frequent visits if required. The survival rates for both the bone blocks and placed implants were then evaluated. Results: A total of 42 blocks and 90 implants were placed. Only one bone graft and 5 implants failed; the survival rate was 97.2% and 95.5% for the bone grafts and implants, respectively. The graft failed due to the onset of post-surgical infectious sinusitis, while in some patients' implants showed absence of osteointegration at the end of the healing phase. Of note, all failed implants were observed in heavy smokers; in all other patients, blocks and implants were successful. Conclusions: This preliminary case series suggests that the grafting of bone allograft followed by delayed implant placement may be a promising strategy for sinus augmentation. More extended and larger follow-up studies are needed to confirm this preliminary data.
- 1 January 2013
- Published by Medknow in Contemporary Clinical Dentistry
- Vol. 4 (1) , 13-9
Open AccessThe use of bone block allografts in sinus augmentation, followed by delayed implant placement: A case series
Purpose: This article reports the clinical outcomes observed in a large number of patients receiving block bone allograft used for sinus augmentation and delayed implant placement. Patients and Methods: In total, 28 patients (13 males) with a mean age of 49.8 ± 10.1 years (range: 33-67 years) were included in this case series. All selected patients suffered from severe alveolar ridge atrophy in the posterior maxilla and required bone augmentation procedures, followed by implant placement after 6 months. All patients were followed for 18 months after the grafting, with scheduled monthly visits and/or more frequent visits if required. The survival rates for both the bone blocks and placed implants were then evaluated. Results: A total of 42 blocks and 90 implants were placed. Only one bone graft and 5 implants failed; the survival rate was 97.2% and 95.5% for the bone grafts and implants, respectively. The graft failed due to the onset of post-surgical infectious sinusitis, while in some patients' implants showed absence of osteointegration at the end of the healing phase. Of note, all failed implants were observed in heavy smokers; in all other patients, blocks and implants were successful. Conclusions: This preliminary case series suggests that the grafting of bone allograft followed by delayed implant placement may be a promising strategy for sinus augmentation. More extended and larger follow-up studies are needed to confirm this preliminary data.
- 10 October 2012
- Published by Wiley in International Journal of Dental Hygiene
- Vol. 10 (4) , 291
Authors' reply
- 10 October 2012
- Published by Wiley in International Journal of Dental Hygiene
- Vol. 10 (4) , 291
Authors' reply
- 24 July 2012
- Published by Wiley in Surface and Interface Analysis
- Vol. 44 (13) , 1582-1586
Nanometrical evaluation of direct laser implant surface
The present study was designed to evaluate the characteristics and the topography of a new implant surface. Titanium discs were manufactured using master alloy powder (Ti‐6Al‐4V) with a particle size of 25–45 µm as the basic material (Leader Implants, Milan, Italy). We acquired images in three different dimensional ranges of decreasing dimensions: 30 (dimensional class A), 10 (dimensional class B), and 5 µm 2 (dimensional class C). For each dimensional range, we collected five (dimensional classes A and B) to ten (dimensional classes C) different images, belonging both to the center and to the edge of the slide Results: In dimensional class A, implant surface showed an average roughness value ( R a ) of 0.6 µm, whereas the root mean square roughness ( R rms ) value was 0.78 µm. In the dimensional class B, value of R a was 133.4 µm and value of R rms was 161.7 µm. Finally, at a smaller level as in dimensional class C, value of R a was 68.5 µm and R rms was 81.05 µm. Moreover, the peak to peak value was 369.5 µm and the average height value was 187.3 µm Discussion: The surface which results from direct laser fabrication process has an ideal nano‐roughness to enhance protein adsorption and to facilitate precursor osteoblast adhesion. In conclusion, direct laser forming surface seems to be a promising technique for forming dental implants from titanium alloys. Copyright © 2012 John Wiley & Sons, Ltd.
- 24 July 2012
- Published by Wiley in Surface and Interface Analysis
- Vol. 44 (13) , 1582-1586
Nanometrical evaluation of direct laser implant surface
The present study was designed to evaluate the characteristics and the topography of a new implant surface. Titanium discs were manufactured using master alloy powder (Ti‐6Al‐4V) with a particle size of 25–45 µm as the basic material (Leader Implants, Milan, Italy). We acquired images in three different dimensional ranges of decreasing dimensions: 30 (dimensional class A), 10 (dimensional class B), and 5 µm 2 (dimensional class C). For each dimensional range, we collected five (dimensional classes A and B) to ten (dimensional classes C) different images, belonging both to the center and to the edge of the slide Results: In dimensional class A, implant surface showed an average roughness value ( R a ) of 0.6 µm, whereas the root mean square roughness ( R rms ) value was 0.78 µm. In the dimensional class B, value of R a was 133.4 µm and value of R rms was 161.7 µm. Finally, at a smaller level as in dimensional class C, value of R a was 68.5 µm and R rms was 81.05 µm. Moreover, the peak to peak value was 369.5 µm and the average height value was 187.3 µm Discussion: The surface which results from direct laser fabrication process has an ideal nano‐roughness to enhance protein adsorption and to facilitate precursor osteoblast adhesion. In conclusion, direct laser forming surface seems to be a promising technique for forming dental implants from titanium alloys. Copyright © 2012 John Wiley & Sons, Ltd.
- 6 January 2012
- Published by Wiley in Clinical Oral Implants Research
- Vol. 24, 122-126
Changes in soft tissues around immediate full-arch rehabilitations: a prospective study
- 6 January 2012
- Published by Wiley in Clinical Oral Implants Research
- Vol. 24, 122-126
Changes in soft tissues around immediate full-arch rehabilitations: a prospective study
- Open Access
- 1 January 2012
- Published by Medknow in Contemporary Clinical Dentistry
- Vol. 3 (6) , 233-9
An unusual case of unicystic intramural ameloblastoma and review of the literature
Ameloblastoma is the most common tumor of odontogenic origin. There are various types of this tumor and confusion still exists among the clinicians about the correct classification. Multicystic ameloblastoma is the most frequent subtype while unicystic ameloblastoma can be considered as a variant of the solid or multycistic. This subtype is considered as a less aggressive tumor with a variable recurrence rate. However, its frequency is often underestimated. The aim of this article is reviewing the recent literature about unicystic ameloblastoma using our unusual clinical case as a starting point to illustrate this discussion. A 30-year-old man who had been complaining of slight pain in the premolar and molar area of the left side of mandible had a check up at our department. X-rays revealed a unilocular radiotrasparency with radiopaque margins. The first histological diagnosis was an odontogenic cyst. Successive histological evaluations revealed that ameloblastic epithelial islands were present in lassus connective tissue. We think that our case report provides new insights into the approach to the ameloblastoma diagnosis. We agree with authors who have pointed out that a single small biopsy may often be inadequate for the correct diagnosis of amelobastoma. Moreover, in the light of our experience, it should be kept in mind that ameloblastomas may have sometimes unusual presentations and this fact should induce surgeons and pathologists to consider carefully each lesion.
- 1 January 2012
- Published by Medknow in Contemporary Clinical Dentistry
- Vol. 3 (6) , 233-9
Open AccessAn unusual case of unicystic intramural ameloblastoma and review of the literature
Ameloblastoma is the most common tumor of odontogenic origin. There are various types of this tumor and confusion still exists among the clinicians about the correct classification. Multicystic ameloblastoma is the most frequent subtype while unicystic ameloblastoma can be considered as a variant of the solid or multycistic. This subtype is considered as a less aggressive tumor with a variable recurrence rate. However, its frequency is often underestimated. The aim of this article is reviewing the recent literature about unicystic ameloblastoma using our unusual clinical case as a starting point to illustrate this discussion. A 30-year-old man who had been complaining of slight pain in the premolar and molar area of the left side of mandible had a check up at our department. X-rays revealed a unilocular radiotrasparency with radiopaque margins. The first histological diagnosis was an odontogenic cyst. Successive histological evaluations revealed that ameloblastic epithelial islands were present in lassus connective tissue. We think that our case report provides new insights into the approach to the ameloblastoma diagnosis. We agree with authors who have pointed out that a single small biopsy may often be inadequate for the correct diagnosis of amelobastoma. Moreover, in the light of our experience, it should be kept in mind that ameloblastomas may have sometimes unusual presentations and this fact should induce surgeons and pathologists to consider carefully each lesion.
- 31 December 2011
- Published by Elsevier in Archives of Oral Biology
- Vol. 56 (12) , 1499-1505
Association between genetic risk score and periodontitis onset and progression: A pilot study
- 31 December 2011
- Published by Elsevier in Archives of Oral Biology
- Vol. 56 (12) , 1499-1505
Association between genetic risk score and periodontitis onset and progression: A pilot study
- 1 September 2011
- Published by Elsevier in Journal of Oral and Maxillofacial Surgery
- Vol. 69 (9) , 2298-2304
Morbidity Associated With Iliac Crest Harvesting in the Treatment of Maxillary and Mandibular Atrophies: A 10-Year Analysis
- 1 September 2011
- Published by Elsevier in Journal of Oral and Maxillofacial Surgery
- Vol. 69 (9) , 2298-2304
Morbidity Associated With Iliac Crest Harvesting in the Treatment of Maxillary and Mandibular Atrophies: A 10-Year Analysis