Kanjiro Torigoe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Kanjiro Torigoe has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
Kunio Esumi
Department of Applied Chemistry and Institute of Colloid and Interface Science, Tokyo University of Science
13 shared publications- Masahiko Abe
Tokyo University of Science
10 shared publications Hideki Sakai
Department of Pure and Applied Chemistry and ‡Research Institute for Science and Technology, Tokyo University of Science, 2641 Yamazaki, Noda 278-8510 Japan
6 shared publicationsKenichi Sakai
Research Institute for Science and Technology, Tokyo University of Science
6 shared publications- Kunio Esumi
Department of Applied Chemistry and Institute of Colloid and Interface Science, Tokyo University of Science
6 shared publications Takeshi Endo
Faculty of Science and Technology, Tokyo University of Science
4 shared publications
Latest Publications
- Open Access
- 7 April 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (24) , 14396-14402
Role of alkan-1-ol solvents in the synthesis of yellow luminescent carbon quantum dots (CQDs): van der Waals force-caused aggregation and agglomeration
Carbon quantum dots (CQDs; luminescent carbon nanoparticles, size < 10 nm) have attracted much attention with respect to their eco-friendliness and multi-functionality. The solvent-dependent photoluminescence of CQDs has been well investigated to optimize the synthesis process and homogeneous dispersion. Although some alkan-1-ol solvents, such as ethanol, have been well utilized empirically as good solvents when synthesizing highly photoluminescent CQDs, the role of alkan-1-ol solvents, particularly long-chain alkan-1-ols (e.g., 1-nonanol, 1-decanol), has not yet been clarified. Herein, we demonstrate a method for the synthesis of strongly yellow emitting CQDs using solvothermal treatment and elucidate the role of alkan-1-ol solvents in the photoluminescence of CQDs. These CQDs have been characterized using theoretical calculations, ex situ morphological observations using transmission electron microscopy (TEM) and dynamic light scattering (DLS), and 500 MHz 1H nuclear magnetic resonance (NMR) and 13C NMR spectroscopy. A comparative study of alkan-1-ol solvents suggests a mechanism for the agglomeration and aggregation of carbon precursors, intermediates, and CQDs, which is expected to lead to further synthesis studies on highly luminescent CQDs.
- 7 April 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (24) , 14396-14402
Open AccessRole of alkan-1-ol solvents in the synthesis of yellow luminescent carbon quantum dots (CQDs): van der Waals force-caused aggregation and agglomeration
Carbon quantum dots (CQDs; luminescent carbon nanoparticles, size < 10 nm) have attracted much attention with respect to their eco-friendliness and multi-functionality. The solvent-dependent photoluminescence of CQDs has been well investigated to optimize the synthesis process and homogeneous dispersion. Although some alkan-1-ol solvents, such as ethanol, have been well utilized empirically as good solvents when synthesizing highly photoluminescent CQDs, the role of alkan-1-ol solvents, particularly long-chain alkan-1-ols (e.g., 1-nonanol, 1-decanol), has not yet been clarified. Herein, we demonstrate a method for the synthesis of strongly yellow emitting CQDs using solvothermal treatment and elucidate the role of alkan-1-ol solvents in the photoluminescence of CQDs. These CQDs have been characterized using theoretical calculations, ex situ morphological observations using transmission electron microscopy (TEM) and dynamic light scattering (DLS), and 500 MHz 1H nuclear magnetic resonance (NMR) and 13C NMR spectroscopy. A comparative study of alkan-1-ol solvents suggests a mechanism for the agglomeration and aggregation of carbon precursors, intermediates, and CQDs, which is expected to lead to further synthesis studies on highly luminescent CQDs.
- 31 March 2019
- Published by Springer Nature
- p. 111-118
Electron Microscopy Observation of Solid Particles
- 31 March 2019
- Published by Springer Nature
- p. 111-118
Electron Microscopy Observation of Solid Particles
- Open Access
- 26 December 2018
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 3 (12) , 18323-18333
High-Power Abiotic Direct Glucose Fuel Cell Using a Gold–Platinum Bimetallic Anode Catalyst
We developed a high-power abiotic direct glucose fuel cell system using a Au–Pt bimetallic anode catalyst. The high power generation (95.7 mW cm–2) was attained by optimizing operating conditions such as the composition of a bimetallic anode catalyst, loading amount of the metal catalyst on a carbon support, ionomer/carbon weight ratio when the catalyst was applied to the anode, glucose and KOH concentrations in the fuel solution, and operating temperature and flow rate of the fuel solution. It was found that poly(N-vinyl-2-pyrrolidone)-stabilized Au80Pt20 nanoparticles (mean diameter 1.5 nm) on a carbon (Ketjen Black 600) support function as a highly active anode catalyst for the glucose electrooxidation. The ionomer/carbon weight ratio also greatly affects the cell properties, which was found to be optimal at 0.2. As for the glucose concentration, a maximum cell power was derived at 0.4–0.6 mol dm–3. A high KOH concentration (4.0 mol dm–3) was preferable for deriving the maximum power. The cell power increased with the increasing flow rate of the glucose solution up to 50 cm3 min–1 and leveled off thereafter. At the optimal condition, the maximum power density and corresponding cell voltage of 58.2 mW cm–2 (0.36 V) and 95.7 mW cm–2 (0.34 V) were recorded at 298 and 328 K, respectively.
- 26 December 2018
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 3 (12) , 18323-18333
Open AccessHigh-Power Abiotic Direct Glucose Fuel Cell Using a Gold–Platinum Bimetallic Anode Catalyst
We developed a high-power abiotic direct glucose fuel cell system using a Au–Pt bimetallic anode catalyst. The high power generation (95.7 mW cm–2) was attained by optimizing operating conditions such as the composition of a bimetallic anode catalyst, loading amount of the metal catalyst on a carbon support, ionomer/carbon weight ratio when the catalyst was applied to the anode, glucose and KOH concentrations in the fuel solution, and operating temperature and flow rate of the fuel solution. It was found that poly(N-vinyl-2-pyrrolidone)-stabilized Au80Pt20 nanoparticles (mean diameter 1.5 nm) on a carbon (Ketjen Black 600) support function as a highly active anode catalyst for the glucose electrooxidation. The ionomer/carbon weight ratio also greatly affects the cell properties, which was found to be optimal at 0.2. As for the glucose concentration, a maximum cell power was derived at 0.4–0.6 mol dm–3. A high KOH concentration (4.0 mol dm–3) was preferable for deriving the maximum power. The cell power increased with the increasing flow rate of the glucose solution up to 50 cm3 min–1 and leveled off thereafter. At the optimal condition, the maximum power density and corresponding cell voltage of 58.2 mW cm–2 (0.36 V) and 95.7 mW cm–2 (0.34 V) were recorded at 298 and 328 K, respectively.
- Open Access
- 1 January 2017
- Published by Japan Society of Colour Material in Journal of the Japan Society of Colour Material
- Vol. 90 (2) , 61-66
Effects of Stabilizer Concentration on the Electrochemical Performance of Au-Pt Anode Catalysts for Direct Glucose Fuel Cell
Effects of stabilizer (poly(N-vinyl-2-pyrrolidone), PVP) concentration on the electrochemical performance of Au-Pt bimetallic (Au4Pt) anode catalysts for direct glucose fuel cell (DGFC) have been investigated. In the cyclic voltammetry, the maximum current density was recorded at [PVP] / [metal] = 1 in molar ratio for the carbon supported metal nanoparticle catalysts at 5 wt% metal loading. At lower PVP concentrations, the current density decreased due to aggregation of metal nanoparticles, while at higher PVP concentrations, the current density also decreased, presumably due to loss of active surface area of the metal catalyst by passivating with the stabilizer. Also for the full cell systems, the maximum power density was recorded at [PVP] / [metal] = 1. When the optimal stabilizer condition was applied to the full cell system, the maximum power density of 12.7 mW cm-2 at 0.38 V vs Ag | AgCl and the open circuit voltage of 0.85 V were recorded. Furthermore, a set of 10 stacked cells was able to light 6 LED lamps of total 1 W for over 60 h without flowing the glucose fuel. These results demonstrate that the present DGFC system can be applied as a power supply for LED illuminating systems.
- 1 January 2017
- Published by Japan Society of Colour Material in Journal of the Japan Society of Colour Material
- Vol. 90 (2) , 61-66
Open AccessEffects of Stabilizer Concentration on the Electrochemical Performance of Au-Pt Anode Catalysts for Direct Glucose Fuel Cell
Effects of stabilizer (poly(N-vinyl-2-pyrrolidone), PVP) concentration on the electrochemical performance of Au-Pt bimetallic (Au4Pt) anode catalysts for direct glucose fuel cell (DGFC) have been investigated. In the cyclic voltammetry, the maximum current density was recorded at [PVP] / [metal] = 1 in molar ratio for the carbon supported metal nanoparticle catalysts at 5 wt% metal loading. At lower PVP concentrations, the current density decreased due to aggregation of metal nanoparticles, while at higher PVP concentrations, the current density also decreased, presumably due to loss of active surface area of the metal catalyst by passivating with the stabilizer. Also for the full cell systems, the maximum power density was recorded at [PVP] / [metal] = 1. When the optimal stabilizer condition was applied to the full cell system, the maximum power density of 12.7 mW cm-2 at 0.38 V vs Ag | AgCl and the open circuit voltage of 0.85 V were recorded. Furthermore, a set of 10 stacked cells was able to light 6 LED lamps of total 1 W for over 60 h without flowing the glucose fuel. These results demonstrate that the present DGFC system can be applied as a power supply for LED illuminating systems.
- Open Access
- 1 January 2015
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 64 (6) , 663-672
Synthesis of Silica Nanotube Using Myelin Figure as Template and their Formation Mechanism
Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies
- 1 January 2015
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 64 (6) , 663-672
Open AccessSynthesis of Silica Nanotube Using Myelin Figure as Template and their Formation Mechanism
Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies
- 16 January 2014
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 30 (3) , 922-928
Preparation of Gold/Silver/Titania Trilayered Nanorods and Their Photocatalytic Activities
Gold/silver/titania trilayered nanorods have been prepared by the successive deposition of silver and titania layers on gold nanorod cores, and their photocatalytic activities were investigated under visible-light illumination (λ > 420 nm). The photocatalytic activity of the trilayered nanorods in the oxidation of 2-propanol depends on both the Au/Ag composition and the thickness of the TiO2 shell. It increases with increasing Ag content up to [Au]/[Ag] = 1:5 (molar ratio) and then decreases with further increasing Ag content. The photocatalytic activity also increases with increasing TiO2 shell thickness up to 10 nm and then decreases with further increases in the shell thickness. These effects were explained by electron-transfer and energy-transfer mechanisms.
- 16 January 2014
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 30 (3) , 922-928
Preparation of Gold/Silver/Titania Trilayered Nanorods and Their Photocatalytic Activities
Gold/silver/titania trilayered nanorods have been prepared by the successive deposition of silver and titania layers on gold nanorod cores, and their photocatalytic activities were investigated under visible-light illumination (λ > 420 nm). The photocatalytic activity of the trilayered nanorods in the oxidation of 2-propanol depends on both the Au/Ag composition and the thickness of the TiO2 shell. It increases with increasing Ag content up to [Au]/[Ag] = 1:5 (molar ratio) and then decreases with further increasing Ag content. The photocatalytic activity also increases with increasing TiO2 shell thickness up to 10 nm and then decreases with further increases in the shell thickness. These effects were explained by electron-transfer and energy-transfer mechanisms.
- 1 January 2014
- Published by Japan Society of Colour Material in Journal of the Japan Society of Colour Material
- Vol. 87 (10) , 352-355
Synthesis of Au Nanoparticle using a Microreactor and Microwave System
マイクロ波を用いたAuナノ粒子の合成の前処理にマイクロリアクターを用いることで,還元力の弱い還元剤中であっても均一な粒子径を迅速に合成できることを見いだした。マイクロリアクターを用いて試料水溶液を0.5 mL s−1の流速で混合撹拌したところ,金ナノ粒子の核が生成した。生成した核をマイクロ波照射により迅速に加熱したところ,均一なサイズの二種類のAuナノ粒子(約7 nmおよび16 nm)が生成した。一方,マイクロリアクターの流速を1.0 mL s−1以上に設定したところ,7 nmの微細なナノ粒子しか生成しなかった。さらに流速をより高速(2.0 mL s−1)にすることで,その均一度が向上することがわかった。つまり,マイクロリアクターの流速の変化はナノ粒子の成長に大きく影響を及ぼすことがわかった。ちなみに,マグネティックスターラー撹拌を行った試料を用いても,マイクロ波によるAuナノ粒子の生成は確認されなかった。
- 1 January 2014
- Published by Japan Society of Colour Material in Journal of the Japan Society of Colour Material
- Vol. 87 (10) , 352-355
Synthesis of Au Nanoparticle using a Microreactor and Microwave System
マイクロ波を用いたAuナノ粒子の合成の前処理にマイクロリアクターを用いることで,還元力の弱い還元剤中であっても均一な粒子径を迅速に合成できることを見いだした。マイクロリアクターを用いて試料水溶液を0.5 mL s−1の流速で混合撹拌したところ,金ナノ粒子の核が生成した。生成した核をマイクロ波照射により迅速に加熱したところ,均一なサイズの二種類のAuナノ粒子(約7 nmおよび16 nm)が生成した。一方,マイクロリアクターの流速を1.0 mL s−1以上に設定したところ,7 nmの微細なナノ粒子しか生成しなかった。さらに流速をより高速(2.0 mL s−1)にすることで,その均一度が向上することがわかった。つまり,マイクロリアクターの流速の変化はナノ粒子の成長に大きく影響を及ぼすことがわかった。ちなみに,マグネティックスターラー撹拌を行った試料を用いても,マイクロ波によるAuナノ粒子の生成は確認されなかった。
- 1 January 2014
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 63 (5) , 507-513
Preparation of Gold/Titania Core^|^ndash;Shell Nanocomposites with a Tunable Shell Thickness
Gold/titania nanocomposites with a core–shell structure were prepared by sol–gel reaction of titanium tetrabutoxide (TTBO) with gold nanoparticles, core-stabilized with cetyltrimethylammonium bromide (CTAB), using a ternary mixture of alcohol/acetonitrile/water as solvent. TEM characterization of the resulting constructs revealed spherical nanocomposites, each containing a single gold core. The mean diameter of the gold cores was 13 nm, while the thicknesses of titania shells were readily tuned in the range 4–30 nm by varying the alkyl chain length of the alcohol. In addition, the gold nanoparticles exhibited a deep red color, with an intense extinction peak at 527 nm, owing to their surface plasmon resonance (SPR) properties. When the Au nanoparticles were coated with a titania shell, their color changed to purple and the SPR peak shifted to a higher wavelength of 537 nm. Furthermore, the core–shell nanocomposites were found to display photocatalytic activity for the oxidation of 2-propanol under illumination by visible light (λ=500–560 nm).
- 1 January 2014
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 63 (5) , 507-513
Preparation of Gold/Titania Core^|^ndash;Shell Nanocomposites with a Tunable Shell Thickness
Gold/titania nanocomposites with a core–shell structure were prepared by sol–gel reaction of titanium tetrabutoxide (TTBO) with gold nanoparticles, core-stabilized with cetyltrimethylammonium bromide (CTAB), using a ternary mixture of alcohol/acetonitrile/water as solvent. TEM characterization of the resulting constructs revealed spherical nanocomposites, each containing a single gold core. The mean diameter of the gold cores was 13 nm, while the thicknesses of titania shells were readily tuned in the range 4–30 nm by varying the alkyl chain length of the alcohol. In addition, the gold nanoparticles exhibited a deep red color, with an intense extinction peak at 527 nm, owing to their surface plasmon resonance (SPR) properties. When the Au nanoparticles were coated with a titania shell, their color changed to purple and the SPR peak shifted to a higher wavelength of 537 nm. Furthermore, the core–shell nanocomposites were found to display photocatalytic activity for the oxidation of 2-propanol under illumination by visible light (λ=500–560 nm).
- Open Access
- 1 January 2013
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 62 (8) , 637-641
Preparation of Hollow Titania Nanoparticles of Single-nanometer Size Using a PAMAM Dendrimer Template
Hollow titania nanoparticles of single-nanometer size have been prepared from titanium oxysulfate (TiOSO4) using poly(amidoamine) (PAMAM) dendrimer molecules (Generations 5 with amino terminal groups) as a template. At low pH (pH 1), hydrolysis of the titania precursor was attenuated and the sol-gel reaction preferentially proceeded at the dendrimer surface. Calcination at 450°C yielded crystalline titania nanoparticles of 5.5 nm diameter with a ~2 nm cavity. These hollow titania nanoparticles showed a larger band-gap energy than solid particles of corresponding size.
- 1 January 2013
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 62 (8) , 637-641
Open AccessPreparation of Hollow Titania Nanoparticles of Single-nanometer Size Using a PAMAM Dendrimer Template
Hollow titania nanoparticles of single-nanometer size have been prepared from titanium oxysulfate (TiOSO4) using poly(amidoamine) (PAMAM) dendrimer molecules (Generations 5 with amino terminal groups) as a template. At low pH (pH 1), hydrolysis of the titania precursor was attenuated and the sol-gel reaction preferentially proceeded at the dendrimer surface. Calcination at 450°C yielded crystalline titania nanoparticles of 5.5 nm diameter with a ~2 nm cavity. These hollow titania nanoparticles showed a larger band-gap energy than solid particles of corresponding size.
- 1 January 2013
- Published by Japan Society of Colour Material in Journal of the Japan Society of Colour Material
- Vol. 86 (10) , 365-370
Formation of Gold Nanorod Dimers and their Activity for Surface-Enhanced Raman Scattering
Side-by-side connected gold nanorod dimers were formed by ligand substitution of hexadecyltrimethylammonium bromide (C16TAB) bilayer with 1-hexylamine. The addition of 1-hexylamine caused a gradual aggregation of gold nanorods, which was verified from blue shift of the longitudinal localized surface plasmon resonance (LSPR) band of gold nanorods. Dimers were found to be preponderant at about 4 h from the addition of 1-hexylamine. Raman intensity of Rhodamine 6G (R6G) molecules in the presence of gold nanorod dimers exhibited a 50-fold and a 15-fold enhancement compared with that of aqueous R6G solution without gold nanorods and with gold nanorod monomers, respectively.
- 1 January 2013
- Published by Japan Society of Colour Material in Journal of the Japan Society of Colour Material
- Vol. 86 (10) , 365-370
Formation of Gold Nanorod Dimers and their Activity for Surface-Enhanced Raman Scattering
Side-by-side connected gold nanorod dimers were formed by ligand substitution of hexadecyltrimethylammonium bromide (C16TAB) bilayer with 1-hexylamine. The addition of 1-hexylamine caused a gradual aggregation of gold nanorods, which was verified from blue shift of the longitudinal localized surface plasmon resonance (LSPR) band of gold nanorods. Dimers were found to be preponderant at about 4 h from the addition of 1-hexylamine. Raman intensity of Rhodamine 6G (R6G) molecules in the presence of gold nanorod dimers exhibited a 50-fold and a 15-fold enhancement compared with that of aqueous R6G solution without gold nanorods and with gold nanorod monomers, respectively.