Håkan Wennerström
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Håkan Wennerström has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Ulf Olsson
Physical Chemistry, Lund University, Lund, Sweden
5 shared publications - Emma Sparr
Division of Physical Chemistry, Department of Chemistry, Lund University, Lund, Sweden
3 shared publications - Joakim Stenhammar
Division of Physical Chemistry, Lund University, Sweden
3 shared publications - Per-Olof Westlund
Innventia AB, P.O. Box 5604, SE-114 86 Stockholm, Sweden
3 shared publications - Daniel Topgaard
Department of Chemistry, Lund University, Lund, Sweden
2 shared publications Emma Sparr
Division of Physical Chemistry Lund University P.O. Box 124 S-221 00 Lund Sweden
2 shared publications
Latest Publications
- Open Access
Thermal fluctuations and osmotic stability of lipid vesicles
Biological membranes constantly change their shape in response to external stimuli, and understanding the remodeling and stability of vesicles in heterogeneous environments is therefore of fundamental importance for a range of cellular processes. One crucial question is how vesicles respond to external osmotic stresses, imposed by differences in solute concentrations between the vesicle interior and exterior. Previous analyses of the membrane bending energy have predicted that micron-sized giant unilamellar vesicles (GUVs) should become globally deformed already for nanomolar concentration differences, in contrast to experimental findings that find deformations at much higher osmotic stresses. In this article, we analyze the mechanical stability of a spherical vesicle exposed to an external osmotic pressure in a statistical-mechanical model, including the effect of thermally excited membrane bending modes. We find that the inclusion of thermal fluctuations of the vesicle shape changes renders the vesicle deformation continuous, in contrast to the abrupt transition in the athermal picture. Crucially, however, the predicted critical pressure associated with global vesicle deformation remains the same as when thermal fluctuations are neglected, approximately six orders of magnitude smaller than the typical collapse pressure recently observed experimentally for GUVs. We conclude by discussing possible sources of this persisting dissonance between theory and experiments.
Open AccessThermal fluctuations and osmotic stability of lipid vesicles
Biological membranes constantly change their shape in response to external stimuli, and understanding the remodeling and stability of vesicles in heterogeneous environments is therefore of fundamental importance for a range of cellular processes. One crucial question is how vesicles respond to external osmotic stresses, imposed by differences in solute concentrations between the vesicle interior and exterior. Previous analyses of the membrane bending energy have predicted that micron-sized giant unilamellar vesicles (GUVs) should become globally deformed already for nanomolar concentration differences, in contrast to experimental findings that find deformations at much higher osmotic stresses. In this article, we analyze the mechanical stability of a spherical vesicle exposed to an external osmotic pressure in a statistical-mechanical model, including the effect of thermally excited membrane bending modes. We find that the inclusion of thermal fluctuations of the vesicle shape changes renders the vesicle deformation continuous, in contrast to the abrupt transition in the athermal picture. Crucially, however, the predicted critical pressure associated with global vesicle deformation remains the same as when thermal fluctuations are neglected, approximately six orders of magnitude smaller than the typical collapse pressure recently observed experimentally for GUVs. We conclude by discussing possible sources of this persisting dissonance between theory and experiments.
- Open Access
- 15 December 2022
- Published by American Physical Society (APS) in Physical Review E
- Vol. 106 (6) , 064607
Thermal fluctuations and osmotic stability of lipid vesicles
Biological membranes constantly change their shape in response to external stimuli, and understanding the remodeling and stability of vesicles in heterogeneous environments is therefore of fundamental importance for a range of cellular processes. One crucial question is how vesicles respond to external osmotic stresses, imposed by differences in solute concentrations between the vesicle interior and exterior. Previous analyses of the membrane bending energy have predicted that micron-sized giant unilamellar vesicles (GUVs) should become globally deformed already for nanomolar concentration differences, in contrast to experimental findings that find deformations at much higher osmotic stresses. In this article, we analyze the mechanical stability of a spherical vesicle exposed to an external osmotic pressure in a statistical-mechanical model, including the effect of thermally excited membrane bending modes. We find that the inclusion of thermal fluctuations of the vesicle shape changes renders the vesicle deformation continuous, in contrast to the abrupt transition in the athermal picture. Crucially, however, the predicted critical pressure associated with global vesicle deformation remains the same as when thermal fluctuations are neglected, approximately six orders of magnitude smaller than the typical collapse pressure recently observed experimentally for GUVs. We conclude by discussing possible sources of this persisting dissonance between theory and experiments.
- 15 December 2022
- Published by American Physical Society (APS) in Physical Review E
- Vol. 106 (6) , 064607
Open AccessThermal fluctuations and osmotic stability of lipid vesicles
Biological membranes constantly change their shape in response to external stimuli, and understanding the remodeling and stability of vesicles in heterogeneous environments is therefore of fundamental importance for a range of cellular processes. One crucial question is how vesicles respond to external osmotic stresses, imposed by differences in solute concentrations between the vesicle interior and exterior. Previous analyses of the membrane bending energy have predicted that micron-sized giant unilamellar vesicles (GUVs) should become globally deformed already for nanomolar concentration differences, in contrast to experimental findings that find deformations at much higher osmotic stresses. In this article, we analyze the mechanical stability of a spherical vesicle exposed to an external osmotic pressure in a statistical-mechanical model, including the effect of thermally excited membrane bending modes. We find that the inclusion of thermal fluctuations of the vesicle shape changes renders the vesicle deformation continuous, in contrast to the abrupt transition in the athermal picture. Crucially, however, the predicted critical pressure associated with global vesicle deformation remains the same as when thermal fluctuations are neglected, approximately six orders of magnitude smaller than the typical collapse pressure recently observed experimentally for GUVs. We conclude by discussing possible sources of this persisting dissonance between theory and experiments.
- Open Access
- 11 July 2022
- Published by Cambridge University Press (CUP) in QRB Discovery
- Vol. 3, e12
On the osmotic pressure of cells
The chemical potential of water ( $ {\mu}_{{\mathrm{H}}_2\mathrm{O}} $ ) provides an essential thermodynamic characterization of the environment of living organisms, and it is of equal significance as the temperature. For cells, $ {\mu}_{{\mathrm{H}}_2\mathrm{O}} $ is conventionally expressed in terms of the osmotic pressure (πosm). We have previously suggested that the main contribution to the intracellular πosmof the bacteriumE. coliis from soluble negatively-charged proteins and their counter-ions. Here, we expand on this analysis by examining how evolutionary divergent cell types cope with the challenge of maintaining πosmwithin viable values. Complex organisms, like mammals, maintain constant internal πosm≈ 0.285 osmol, matching that of 0.154 M NaCl. For bacteria it appears that optimal growth conditions are found for similar or slightly higher πosm(0.25-0.4 osmol), despite that they represent a much earlier stage in evolution. We argue that this value reflects a general adaptation for optimising metabolic function under crowded intracellular conditions. Environmental πosmthat differ from this optimum require therefore special measures, as exemplified with gram-positive and gram-negative bacteria. To handle such situations, their membrane encapsulations allow for a compensating turgor pressure that can take both positive and negative values, where positive pressures allow increased frequency of metabolic events through increased intracellular protein concentrations. A remarkable exception to the rule of 0.25-0.4 osmol, is found for halophilic archaea with internal πosm≈ 15 osmol. The internal organization of these archaea differs in that they utilize a repulsive electrostatic mechanism operating only in the ionic-liquid regime to avoid aggregation, and that they stand out from other organisms by having no turgor pressure.- 11 July 2022
- Published by Cambridge University Press (CUP) in QRB Discovery
- Vol. 3, e12
Open AccessOn the osmotic pressure of cells
The chemical potential of water ( $ {\mu}_{{\mathrm{H}}_2\mathrm{O}} $ ) provides an essential thermodynamic characterization of the environment of living organisms, and it is of equal significance as the temperature. For cells, $ {\mu}_{{\mathrm{H}}_2\mathrm{O}} $ is conventionally expressed in terms of the osmotic pressure (πosm). We have previously suggested that the main contribution to the intracellular πosmof the bacteriumE. coliis from soluble negatively-charged proteins and their counter-ions. Here, we expand on this analysis by examining how evolutionary divergent cell types cope with the challenge of maintaining πosmwithin viable values. Complex organisms, like mammals, maintain constant internal πosm≈ 0.285 osmol, matching that of 0.154 M NaCl. For bacteria it appears that optimal growth conditions are found for similar or slightly higher πosm(0.25-0.4 osmol), despite that they represent a much earlier stage in evolution. We argue that this value reflects a general adaptation for optimising metabolic function under crowded intracellular conditions. Environmental πosmthat differ from this optimum require therefore special measures, as exemplified with gram-positive and gram-negative bacteria. To handle such situations, their membrane encapsulations allow for a compensating turgor pressure that can take both positive and negative values, where positive pressures allow increased frequency of metabolic events through increased intracellular protein concentrations. A remarkable exception to the rule of 0.25-0.4 osmol, is found for halophilic archaea with internal πosm≈ 15 osmol. The internal organization of these archaea differs in that they utilize a repulsive electrostatic mechanism operating only in the ionic-liquid regime to avoid aggregation, and that they stand out from other organisms by having no turgor pressure. - Open Access
Derivation of the Derjaguin approximation for the case of inhomogeneous solvents
The Derjaguin approximation (DA) relates the force between curved surfaces to the interaction free energy between parallel planes. It is typically derived by considering the direct interaction between the bodies involved, thus treating the effect of an intervening solvent implicitly by a rescaling of the corresponding Hamaker constant. Here, we provide a generalization of DA to the case of a molecular medium between the bodies, as is the case in most applications. The derivation is based on an explicit statistical-mechanical treatment of the contribution to the interaction force from a molecular solvent using a general expression for intermolecular and molecule-surface interactions. Starting from an exact expression for the force, DA is arrived at by a series of well-defined approximations. Our results show that DA remains valid in a molecular solvent as long as (i) the surface-molecule interactions are of much shorter range than the radius R of the sphere and (ii) the density correlation length in the solvent is smaller than R. We then extend our analysis to the case where a phase transition occurs between the surfaces, which cannot easily be covered using a statistical-mechanical formalism due to the discontinuous change in the density of the medium. Instead using a continuum thermodynamic description, we show that this phase transformation induces an attractive force between the bodies, and that the force between curved surfaces can be related to the free energy in the corresponding planar case, in accordance with DA.
Open AccessDerivation of the Derjaguin approximation for the case of inhomogeneous solvents
The Derjaguin approximation (DA) relates the force between curved surfaces to the interaction free energy between parallel planes. It is typically derived by considering the direct interaction between the bodies involved, thus treating the effect of an intervening solvent implicitly by a rescaling of the corresponding Hamaker constant. Here, we provide a generalization of DA to the case of a molecular medium between the bodies, as is the case in most applications. The derivation is based on an explicit statistical-mechanical treatment of the contribution to the interaction force from a molecular solvent using a general expression for intermolecular and molecule-surface interactions. Starting from an exact expression for the force, DA is arrived at by a series of well-defined approximations. Our results show that DA remains valid in a molecular solvent as long as (i) the surface-molecule interactions are of much shorter range than the radius R of the sphere and (ii) the density correlation length in the solvent is smaller than R. We then extend our analysis to the case where a phase transition occurs between the surfaces, which cannot easily be covered using a statistical-mechanical formalism due to the discontinuous change in the density of the medium. Instead using a continuum thermodynamic description, we show that this phase transformation induces an attractive force between the bodies, and that the force between curved surfaces can be related to the free energy in the corresponding planar case, in accordance with DA.
- Open Access
- 13 April 2020
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 117 (19) , 10113-10121
Colloidal stability of the living cell
Cellular function is generally depicted at the level of functional pathways and detailed structural mechanisms, based on the identification of specific protein–protein interactions. For an individual protein searching for its partner, however, the perspective is quite different: The functional task is challenged by a dense crowd of nonpartners obstructing the way. Adding to the challenge, there is little information about how to navigate the search, since the encountered surrounding is composed of protein surfaces that are predominantly “nonconserved” or, at least, highly variable across organisms. In this study, we demonstrate from a colloidal standpoint that such a blindfolded intracellular search is indeed favored and has more fundamental impact on the cellular organization than previously anticipated. Basically, the unique polyion composition of cellular systems renders the electrostatic interactions different from those in physiological buffer, leading to a situation where the protein net-charge density balances the attractive dispersion force and surface heterogeneity at close range. Inspection of naturally occurring proteomes and in-cell NMR data show further that the “nonconserved” protein surfaces are by no means passive but chemically biased to varying degree of net-negative repulsion across organisms. Finally, this electrostatic control explains how protein crowding is spontaneously maintained at a constant level through the intracellular osmotic pressure and leads to the prediction that the “extreme” in halophilic adaptation is not the ionic-liquid conditions per se but the evolutionary barrier of crossing its physicochemical boundaries.
- 13 April 2020
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 117 (19) , 10113-10121
Open AccessColloidal stability of the living cell
Cellular function is generally depicted at the level of functional pathways and detailed structural mechanisms, based on the identification of specific protein–protein interactions. For an individual protein searching for its partner, however, the perspective is quite different: The functional task is challenged by a dense crowd of nonpartners obstructing the way. Adding to the challenge, there is little information about how to navigate the search, since the encountered surrounding is composed of protein surfaces that are predominantly “nonconserved” or, at least, highly variable across organisms. In this study, we demonstrate from a colloidal standpoint that such a blindfolded intracellular search is indeed favored and has more fundamental impact on the cellular organization than previously anticipated. Basically, the unique polyion composition of cellular systems renders the electrostatic interactions different from those in physiological buffer, leading to a situation where the protein net-charge density balances the attractive dispersion force and surface heterogeneity at close range. Inspection of naturally occurring proteomes and in-cell NMR data show further that the “nonconserved” protein surfaces are by no means passive but chemically biased to varying degree of net-negative repulsion across organisms. Finally, this electrostatic control explains how protein crowding is spontaneously maintained at a constant level through the intracellular osmotic pressure and leads to the prediction that the “extreme” in halophilic adaptation is not the ionic-liquid conditions per se but the evolutionary barrier of crossing its physicochemical boundaries.
- 4 May 2018
- Published by Taylor & Francis
- p. 101-126
Surfactant Self-Assembly Structures at Interfaces, in Polymer Solutions, and in Bulk: Micellar Size and Connectivity
It was G. S. Hartley who made the pioneering contributions to our understanding of the physical nature of globular micelles (1,2). He realized inter alia the liquid-like nature of the hydrocarbon interior of the micelle and the minimal contact between the solvent water and the surfactant hydrocarbon chains as the main driving force for the association. As illustrated in Figure 1, he pictured the interior of a micelle as essentially “a droplet of liquid paraffin” with the chains in “as near as can be done, a completely chaotic arrangement.” He also argued strongly against some of his contemporaries drawing pictures with radially oriented straight alkyl chains (1): “The symmetrical ‘asterisk’ form so frequently drawn would imply a high degree of organisation and a density of great magnitude in the centre and of less magnitude near the circumference. It has no physical basis and is drawn of no other reason than that the human mind is an organising instrument and finds unorganised processes uncongenial.” Figure 1 Schematic of spherical and elongated micelles, and conformations of surfactant molecules therein, as proposed by Hartley. (From Ref. 2, used with permission; copyright Kolloid-Z, 1940.)
- 4 May 2018
- Published by Taylor & Francis
- p. 101-126
Surfactant Self-Assembly Structures at Interfaces, in Polymer Solutions, and in Bulk: Micellar Size and Connectivity
It was G. S. Hartley who made the pioneering contributions to our understanding of the physical nature of globular micelles (1,2). He realized inter alia the liquid-like nature of the hydrocarbon interior of the micelle and the minimal contact between the solvent water and the surfactant hydrocarbon chains as the main driving force for the association. As illustrated in Figure 1, he pictured the interior of a micelle as essentially “a droplet of liquid paraffin” with the chains in “as near as can be done, a completely chaotic arrangement.” He also argued strongly against some of his contemporaries drawing pictures with radially oriented straight alkyl chains (1): “The symmetrical ‘asterisk’ form so frequently drawn would imply a high degree of organisation and a density of great magnitude in the centre and of less magnitude near the circumference. It has no physical basis and is drawn of no other reason than that the human mind is an organising instrument and finds unorganised processes uncongenial.” Figure 1 Schematic of spherical and elongated micelles, and conformations of surfactant molecules therein, as proposed by Hartley. (From Ref. 2, used with permission; copyright Kolloid-Z, 1940.)
- Open Access
- 21 March 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (15) , 10430-10438
Evaporation, diffusion and self-assembly at drying interfaces
Water evaporation from complex aqueous solutions leads to the build-up of structure and composition gradients at their interface with air. We recently introduced an experimental setup for quantitatively studying such gradients and discussed how structure formation can lead to a self-regulation mechanism for controlling water evaporation through self-assembly. Here, we provide a detailed theoretical analysis using an advection/diffusion transport equation that takes into account thermodynamically non-ideal conditions and we directly relate the theoretical description to quantitative experimental data. We derive that the concentration profile develops according to a general square root of time scaling law, which fully agrees with experimental observations. The evaporation rate notably decreases with time as t−1/2, which shows that diffusion in the liquid phase is the rate limiting step for this system, in contrast to pure water evaporation. For the particular binary system that was investigated experimentally, which is composed of water and a sugar-based surfactant (α-dodecylmaltoside), the interfacial layer consists in a sequence of liquid crystalline phases of different mesostructures. We extract values for mutual diffusion coefficients of lamellar, hexagonal and micellar cubic phases, which are consistent with previously reported values and simple models. We thus provide a method to estimate the transport properties of oriented mesophases. The macroscopic humidity-independence of the evaporation rate up to 85% relative humidities is shown to result from both an extremely low mutual diffusion coefficient and the large range of water activities corresponding to relative humidities below 85%, at which the lamellar phase exists. Such a humidity self-regulation mechanism is expected for a large variety of complex system.
- 21 March 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (15) , 10430-10438
Open AccessEvaporation, diffusion and self-assembly at drying interfaces
Water evaporation from complex aqueous solutions leads to the build-up of structure and composition gradients at their interface with air. We recently introduced an experimental setup for quantitatively studying such gradients and discussed how structure formation can lead to a self-regulation mechanism for controlling water evaporation through self-assembly. Here, we provide a detailed theoretical analysis using an advection/diffusion transport equation that takes into account thermodynamically non-ideal conditions and we directly relate the theoretical description to quantitative experimental data. We derive that the concentration profile develops according to a general square root of time scaling law, which fully agrees with experimental observations. The evaporation rate notably decreases with time as t−1/2, which shows that diffusion in the liquid phase is the rate limiting step for this system, in contrast to pure water evaporation. For the particular binary system that was investigated experimentally, which is composed of water and a sugar-based surfactant (α-dodecylmaltoside), the interfacial layer consists in a sequence of liquid crystalline phases of different mesostructures. We extract values for mutual diffusion coefficients of lamellar, hexagonal and micellar cubic phases, which are consistent with previously reported values and simple models. We thus provide a method to estimate the transport properties of oriented mesophases. The macroscopic humidity-independence of the evaporation rate up to 85% relative humidities is shown to result from both an extremely low mutual diffusion coefficient and the large range of water activities corresponding to relative humidities below 85%, at which the lamellar phase exists. Such a humidity self-regulation mechanism is expected for a large variety of complex system.
- 3 July 2017
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 19 (35) , 23849-23853
Electrostatic interactions in concentrated colloidal dispersions
An explicit expression, free from adjustable parameters, is derived for the effective pair interaction between charged colloidal spheres at high concentration in a medium containing an electrolyte.
- 3 July 2017
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 19 (35) , 23849-23853
Electrostatic interactions in concentrated colloidal dispersions
An explicit expression, free from adjustable parameters, is derived for the effective pair interaction between charged colloidal spheres at high concentration in a medium containing an electrolyte.
- Open Access
A Quantum Description of the Stern–Gerlach Experiment
A detailed analysis of the classic Stern–Gerlach experiment is presented. An analytical simple solution is presented for the quantum description of the translational and spin dynamics of a silver atom in a magnetic field with a gradient along a single z-direction. This description is then used to obtain an approximate quantum description of the more realistic case with a magnetic field gradient also in a second y-direction. An explicit relation is derived for how an initial off center deviation in the y-direction affects the final result observed at the detector. This shows that the “mouth shape” pattern at the detector observed in the original Stern–Gerlach experiment is a generic consequence of the gradient in the y-direction. This is followed by a discussion of the spin dynamics during the entry of the silver atom into the magnet. An analytical relation is derived for a simplified case of a field only along the z-direction. A central question for the conceptual understanding of the Stern–Gerlach experiment has been how an initially unpolarized spin ends up in a polarized state at the detector. It is argued that this can be understood with the use of the adiabatic approximation. When the atoms first experience the magnetic field outside the magnet, there is in general a change in the spin state, which transforms from a degenerate eigenstate in the absence of a field into one of two possible non-degenerate states in the field. If the direction of the field changes during the passage through the device, there is a corresponding adiabatic change of the spin state. It is shown that an application of the adiabatic approximation in this way is consistent with the previously derived exact relations.
Open AccessA Quantum Description of the Stern–Gerlach Experiment
A detailed analysis of the classic Stern–Gerlach experiment is presented. An analytical simple solution is presented for the quantum description of the translational and spin dynamics of a silver atom in a magnetic field with a gradient along a single z-direction. This description is then used to obtain an approximate quantum description of the more realistic case with a magnetic field gradient also in a second y-direction. An explicit relation is derived for how an initial off center deviation in the y-direction affects the final result observed at the detector. This shows that the “mouth shape” pattern at the detector observed in the original Stern–Gerlach experiment is a generic consequence of the gradient in the y-direction. This is followed by a discussion of the spin dynamics during the entry of the silver atom into the magnet. An analytical relation is derived for a simplified case of a field only along the z-direction. A central question for the conceptual understanding of the Stern–Gerlach experiment has been how an initially unpolarized spin ends up in a polarized state at the detector. It is argued that this can be understood with the use of the adiabatic approximation. When the atoms first experience the magnetic field outside the magnet, there is in general a change in the spin state, which transforms from a degenerate eigenstate in the absence of a field into one of two possible non-degenerate states in the field. If the direction of the field changes during the passage through the device, there is a corresponding adiabatic change of the spin state. It is shown that an application of the adiabatic approximation in this way is consistent with the previously derived exact relations.
- 13 April 2016
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 120 (26) , 6074-6079
Microemulsions of Record Low Amphiphile Concentrations Are Affected by the Ambient Gravitational Field
It is shown that the ternary system heavy water–heptane–hexadecyl hexaethylene oxide (C16E6) has a stable bicontinuous microemulsion phase down to an exceptionally low concentration at the balanced temperature of 26.8 °C. It is further demonstrated that the ambient gravitational field has an influence on the observed phase equilibria for typical sample sizes (∼1 cm). Direct measurements using a nuclear magnetic resonance imaging technique demonstrate that sample compositions vary with the height in the vials. It is furthermore found that some samples show four phases at equilibrium in apparent violation of Gibbs’ phase rule. It is pointed out that Gibbs’ phase rule strictly applies only when effects of gravity are negligible. A further consequence of the ambient gravitational field is that, for the system studied, the microemulsion one-phase samples are not observed, when using standard size vials, that is, sample heights on the order of a centimeter. Quantitative determinations of concentration profiles can be used to determine parameters of the free-energy density for the system.
- 13 April 2016
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 120 (26) , 6074-6079
Microemulsions of Record Low Amphiphile Concentrations Are Affected by the Ambient Gravitational Field
It is shown that the ternary system heavy water–heptane–hexadecyl hexaethylene oxide (C16E6) has a stable bicontinuous microemulsion phase down to an exceptionally low concentration at the balanced temperature of 26.8 °C. It is further demonstrated that the ambient gravitational field has an influence on the observed phase equilibria for typical sample sizes (∼1 cm). Direct measurements using a nuclear magnetic resonance imaging technique demonstrate that sample compositions vary with the height in the vials. It is furthermore found that some samples show four phases at equilibrium in apparent violation of Gibbs’ phase rule. It is pointed out that Gibbs’ phase rule strictly applies only when effects of gravity are negligible. A further consequence of the ambient gravitational field is that, for the system studied, the microemulsion one-phase samples are not observed, when using standard size vials, that is, sample heights on the order of a centimeter. Quantitative determinations of concentration profiles can be used to determine parameters of the free-energy density for the system.