Stuart M. McGill
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Stuart M. McGill has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Amy Karpowicz
2 shared publicationsChad Mj Fenwick
2 shared publications- Jack P. Callaghan
Department of Kinesiology and Health Sciences, University of Waterloo, Waterloo, ON, Canada
2 shared publications Kellie Parks
2 shared publications- Richard Lee Hughson
University of Waterloo
2 shared publications - Stephen H. M. Brown
Department of Human Health and Nutritional Sciences, University of Guelph, Guelph, ON, Canada
2 shared publications
Latest Publications
- 5 February 2013
- Published by Taylor & Francis in Ergonomics
- Vol. 56 (2) , 293-302
Low back loads while walking and carrying: comparing the load carried in one hand or in both hands
This study investigates the consequences of carrying load in one hand versus both hands. Six participants walked carrying buckets containing various weights. The weight was either carried in one hand or distributed evenly between both hands. Electromyography, force plate and body kinematic data were input to a three-dimensional anatomically detailed model of the spine to calculate spine loading. Carrying loads in one hand resulted in more load on the low back than when the load was split between both hands. When carrying 30 kg in one hand, the low back compression exceeded 2800 N; however, splitting the load between hands reduced low back compression to 1570 N (reduction of 44%). Doubling the total load by carrying 30 kg in each hand actually produced lower spine compression than when carrying 30 kg in one hand. Balancing the load between both hands when carrying material has merit and should be considered when designing work. Practitioner Summary: Carrying a load in one hand (30 kg) resulted in more spine load than splitting the same load between both hands (15 kg). When carrying double the load in both hands (30 kg in each hand vs. 30 kg in one hand), spine load decreased, suggesting merit in balancing load when designing work.
- 5 February 2013
- Published by Taylor & Francis in Ergonomics
- Vol. 56 (2) , 293-302
Low back loads while walking and carrying: comparing the load carried in one hand or in both hands
This study investigates the consequences of carrying load in one hand versus both hands. Six participants walked carrying buckets containing various weights. The weight was either carried in one hand or distributed evenly between both hands. Electromyography, force plate and body kinematic data were input to a three-dimensional anatomically detailed model of the spine to calculate spine loading. Carrying loads in one hand resulted in more load on the low back than when the load was split between both hands. When carrying 30 kg in one hand, the low back compression exceeded 2800 N; however, splitting the load between hands reduced low back compression to 1570 N (reduction of 44%). Doubling the total load by carrying 30 kg in each hand actually produced lower spine compression than when carrying 30 kg in one hand. Balancing the load between both hands when carrying material has merit and should be considered when designing work. Practitioner Summary: Carrying a load in one hand (30 kg) resulted in more spine load than splitting the same load between both hands (15 kg). When carrying double the load in both hands (30 kg in each hand vs. 30 kg in one hand), spine load decreased, suggesting merit in balancing load when designing work.
- 1 January 2012
- Published by Wolters Kluwer Health in Journal of Strength & Conditioning Research
- Vol. 26 (1) , 16-27
Kettlebell Swing, Snatch, and Bottoms-Up Carry: Back and Hip Muscle Activation, Motion, and Low Back Loads
Lished studies of tissue loads during kettlebell exercises could be found. Given the popularity of kettlebells, this study was designed to provide an insight into the resulting joint loads. Seven male subjects participated in this investigation. In addition, a single case study of the kettlebell swing was performed on an accomplished kettlebell master. Electromyography, ground reaction forces (GRFs), and 3D kinematic data were recorded during exercises using a 16-kg kettlebell. These variables were input into an anatomically detailed biomechanical model that used normalized muscle activation; GRF; and spine, hip, and knee motion to calculate spine compression and shear loads. It was found that kettlebell swings create a hip-hinge squat pattern characterized by rapid muscle activation-relaxation cycles of substantial magnitudes (∼50% of a maximal voluntary contraction [MVC] for the low back extensors and 80% MVC for the gluteal muscles with a 16-kg kettlebell) resulting in about 3,200 N of low back compression. Abdominal muscular pulses together with the muscle bracing associated with carries create kettlebell-specific training opportunities. Some unique loading patterns discovered during the kettlebell swing included the posterior shear of the L4 vertebra on L5, which is opposite in polarity to a traditional lift. Thus, quantitative analysis provides an insight into why many individuals credit kettlebell swings with restoring and enhancing back health and function, although a few find that they irritate tissues....
- 1 January 2012
- Published by Wolters Kluwer Health in Journal of Strength & Conditioning Research
- Vol. 26 (1) , 16-27
Kettlebell Swing, Snatch, and Bottoms-Up Carry: Back and Hip Muscle Activation, Motion, and Low Back Loads
Lished studies of tissue loads during kettlebell exercises could be found. Given the popularity of kettlebells, this study was designed to provide an insight into the resulting joint loads. Seven male subjects participated in this investigation. In addition, a single case study of the kettlebell swing was performed on an accomplished kettlebell master. Electromyography, ground reaction forces (GRFs), and 3D kinematic data were recorded during exercises using a 16-kg kettlebell. These variables were input into an anatomically detailed biomechanical model that used normalized muscle activation; GRF; and spine, hip, and knee motion to calculate spine compression and shear loads. It was found that kettlebell swings create a hip-hinge squat pattern characterized by rapid muscle activation-relaxation cycles of substantial magnitudes (∼50% of a maximal voluntary contraction [MVC] for the low back extensors and 80% MVC for the gluteal muscles with a 16-kg kettlebell) resulting in about 3,200 N of low back compression. Abdominal muscular pulses together with the muscle bracing associated with carries create kettlebell-specific training opportunities. Some unique loading patterns discovered during the kettlebell swing included the posterior shear of the L4 vertebra on L5, which is opposite in polarity to a traditional lift. Thus, quantitative analysis provides an insight into why many individuals credit kettlebell swings with restoring and enhancing back health and function, although a few find that they irritate tissues....
- 5 July 2010
- Published by Taylor & Francis in Computer Methods in Biomechanics and Biomedical Engineering
- Vol. 13 (6) , 829-835
The relationship between trunk muscle activation and trunk stiffness: examining a non-constant stiffness gain
The relationship between muscle activation, force and stiffness needs to be known to interpret the stability state of the spine. To test the relationship between these variables, a quick release approach was used to match quantified torso stiffness with an EMG activation-based estimate of individual muscle stiffnesses. The relationship between activation, force and stiffness was modelled as , where k, F and l are muscle stiffness, force and length, respectively, and q is the dimensionless stiffness gain relating these variables. Under the tested experimental scenario, the ‘stiffness gain’, q, which linked activation with stiffness, demonstrated a decreasing trend with increasing levels of torso muscle activation. This highlights the likelihood that the choice of a single q value may be over simplistic to relate force to stiffness in muscles that control the spine. This has implications for understanding the potential for spine instability in situations requiring high muscular demand.
- 5 July 2010
- Published by Taylor & Francis in Computer Methods in Biomechanics and Biomedical Engineering
- Vol. 13 (6) , 829-835
The relationship between trunk muscle activation and trunk stiffness: examining a non-constant stiffness gain
The relationship between muscle activation, force and stiffness needs to be known to interpret the stability state of the spine. To test the relationship between these variables, a quick release approach was used to match quantified torso stiffness with an EMG activation-based estimate of individual muscle stiffnesses. The relationship between activation, force and stiffness was modelled as , where k, F and l are muscle stiffness, force and length, respectively, and q is the dimensionless stiffness gain relating these variables. Under the tested experimental scenario, the ‘stiffness gain’, q, which linked activation with stiffness, demonstrated a decreasing trend with increasing levels of torso muscle activation. This highlights the likelihood that the choice of a single q value may be over simplistic to relate force to stiffness in muscles that control the spine. This has implications for understanding the potential for spine instability in situations requiring high muscular demand.
- 1 September 2009
- Published by Taylor & Francis in Ergonomics
- Vol. 52 (9) , 1162-1168
Using a pneumatic support to correct sitting posture for prolonged periods: A study using airline seats
Prolonged sitting with spine flexion has been linked to low back disorders. A variety of mechanisms account for this based on biomechanical and neurological variables. Airline seats typically cause pronounced lumbar flexion due to their hollowed seat back design. A pneumatic support, placed between the seat back and the lumbar spine, was tested to see if lumbar flexion was reduced. Results showed that when the seats were positioned in the upright position, 15 of 20 participants experienced reduced lumbar flexion (by 15° on average) with the support. The study was repeated on the five non-responders with the seatback set in the reclined position. This resulted in another four experiencing less lumbar flexion. Since seated flexion is associated with disc stress, reducing flexion with the support reduced lumbar stress. Spine flexion that results from prolonged sitting is associated with disc stress and pain. The pneumatic support tested here reduced spine flexion. While it is not known why airline seats are designed with no lumbar support, which causes excessive lumbar flexion while seated, the pneumatic support corrected this deficit. Reclining the seatback enhanced this effect.
- 1 September 2009
- Published by Taylor & Francis in Ergonomics
- Vol. 52 (9) , 1162-1168
Using a pneumatic support to correct sitting posture for prolonged periods: A study using airline seats
Prolonged sitting with spine flexion has been linked to low back disorders. A variety of mechanisms account for this based on biomechanical and neurological variables. Airline seats typically cause pronounced lumbar flexion due to their hollowed seat back design. A pneumatic support, placed between the seat back and the lumbar spine, was tested to see if lumbar flexion was reduced. Results showed that when the seats were positioned in the upright position, 15 of 20 participants experienced reduced lumbar flexion (by 15° on average) with the support. The study was repeated on the five non-responders with the seatback set in the reclined position. This resulted in another four experiencing less lumbar flexion. Since seated flexion is associated with disc stress, reducing flexion with the support reduced lumbar stress. Spine flexion that results from prolonged sitting is associated with disc stress and pain. The pneumatic support tested here reduced spine flexion. While it is not known why airline seats are designed with no lumbar support, which causes excessive lumbar flexion while seated, the pneumatic support corrected this deficit. Reclining the seatback enhanced this effect.
- 1 July 2009
- Published by Wolters Kluwer Health in Journal of Strength & Conditioning Research
- Vol. 23 (4) , 1148-1161
Comparison of Different Strongman Events: Trunk Muscle Activation and Lumbar Spine Motion, Load, and Stiffness
Strongman events are attracting more interest as training exercises because of their unique demands. Further, strongman competitors sustain specific injuries, particularly to the back. Muscle electromyographic data from various torso and hip muscles, together with kinematic measures, were input to an anatomically detailed model of the torso to estimate back load, low-back stiffness, and hip torque. Events included the farmer's walk, super yoke, Atlas stone lift, suitcase carry, keg walk, tire flip, and log lift. The results document the unique demands of these whole-body events and, in particular, the demands on the back and torso. For example, the very large moments required at the hip for abduction when performing a yoke walk exceed the strength capability of the hip. Here, muscles such as quadratus lumborum made up for the strength deficit by generating frontal plane torque to support the torso/pelvis. In this way, the stiffened torso acts as a source of strength to allow joints with insufficient strength to be buttressed, resulting in successful performance. Timing of muscle activation patterns in events such as the Atlas stone lift demonstrated the need to integrate the hip extensors before the back extensors. Even so, because of the awkward shape of the stone, the protective neutral spine posture was impossible to achieve, resulting in substantial loading on the back that is placed in a weakened posture. Unexpectedly, the super yoke carry resulted in the highest loads on the spine. This was attributed to the weight of the yoke coupled with the massive torso muscle cocontraction, which produced torso stiffness to ensure spine stability together with buttressing the abduction strength insufficiency of the hips. Strongman events clearly challenge the strength of the body linkage, together with the stabilizing system, in a different way than traditional approaches. The carrying events challenged different abilities than the lifting events, suggesting that loaded carrying would enhance traditional lifting-based strength programs. This analysis also documented the technique components of successful, joint-sparing, strongman event strategies.
- 1 July 2009
- Published by Wolters Kluwer Health in Journal of Strength & Conditioning Research
- Vol. 23 (4) , 1148-1161
Comparison of Different Strongman Events: Trunk Muscle Activation and Lumbar Spine Motion, Load, and Stiffness
Strongman events are attracting more interest as training exercises because of their unique demands. Further, strongman competitors sustain specific injuries, particularly to the back. Muscle electromyographic data from various torso and hip muscles, together with kinematic measures, were input to an anatomically detailed model of the torso to estimate back load, low-back stiffness, and hip torque. Events included the farmer's walk, super yoke, Atlas stone lift, suitcase carry, keg walk, tire flip, and log lift. The results document the unique demands of these whole-body events and, in particular, the demands on the back and torso. For example, the very large moments required at the hip for abduction when performing a yoke walk exceed the strength capability of the hip. Here, muscles such as quadratus lumborum made up for the strength deficit by generating frontal plane torque to support the torso/pelvis. In this way, the stiffened torso acts as a source of strength to allow joints with insufficient strength to be buttressed, resulting in successful performance. Timing of muscle activation patterns in events such as the Atlas stone lift demonstrated the need to integrate the hip extensors before the back extensors. Even so, because of the awkward shape of the stone, the protective neutral spine posture was impossible to achieve, resulting in substantial loading on the back that is placed in a weakened posture. Unexpectedly, the super yoke carry resulted in the highest loads on the spine. This was attributed to the weight of the yoke coupled with the massive torso muscle cocontraction, which produced torso stiffness to ensure spine stability together with buttressing the abduction strength insufficiency of the hips. Strongman events clearly challenge the strength of the body linkage, together with the stabilizing system, in a different way than traditional approaches. The carrying events challenged different abilities than the lifting events, suggesting that loaded carrying would enhance traditional lifting-based strength programs. This analysis also documented the technique components of successful, joint-sparing, strongman event strategies.
- 1 May 2009
- Published by Wolters Kluwer Health in Journal of Strength & Conditioning Research
- Vol. 23 (3) , 898-905
Ballistic Abdominal Exercises: Muscle Activation Patterns During Three Activities Along the Stability/Mobility Continuum
Ral tasks requiring rapid abdominal contraction. Eight healthy men from a university population were instrumented to obtain surface electromyography of selected trunk and hip muscles, together with video analysis to calculate joint moments and electromagnetic lumbar spine position sensor to track spine posture. Exercises included a punch, throw, and a ballistic torso-stiffening maneuver. This study found that no muscle turned on significantly before any other muscle during both the 1-in. punch and ballistic torso-stiffening maneuver. Conversely, there was a significant order or muscle onset during the baseball throw. Muscles reached peak activation significantly before any other muscle during the baseball throw and 1-in. punch, but there were no significant differences for the torso-stiffening maneuver. The exercises quantified in this study demonstrated how muscle contraction dynamics change to meet differing demands for stiffening, for force/moment production, and for rapid movements. Specifically, it seems that there is an order of contraction when movement is the goal but not when just spine stability is required. Thus, a different intensity of abdominal bracing is required to achieve the different objectives of sports tasks and exercises....
- 1 May 2009
- Published by Wolters Kluwer Health in Journal of Strength & Conditioning Research
- Vol. 23 (3) , 898-905
Ballistic Abdominal Exercises: Muscle Activation Patterns During Three Activities Along the Stability/Mobility Continuum
Ral tasks requiring rapid abdominal contraction. Eight healthy men from a university population were instrumented to obtain surface electromyography of selected trunk and hip muscles, together with video analysis to calculate joint moments and electromagnetic lumbar spine position sensor to track spine posture. Exercises included a punch, throw, and a ballistic torso-stiffening maneuver. This study found that no muscle turned on significantly before any other muscle during both the 1-in. punch and ballistic torso-stiffening maneuver. Conversely, there was a significant order or muscle onset during the baseball throw. Muscles reached peak activation significantly before any other muscle during the baseball throw and 1-in. punch, but there were no significant differences for the torso-stiffening maneuver. The exercises quantified in this study demonstrated how muscle contraction dynamics change to meet differing demands for stiffening, for force/moment production, and for rapid movements. Specifically, it seems that there is an order of contraction when movement is the goal but not when just spine stability is required. Thus, a different intensity of abdominal bracing is required to achieve the different objectives of sports tasks and exercises....
- 15 February 2009
- Published by Wolters Kluwer Health in Spine
- Vol. 34 (4) , 344-350
Disc Prolapse
Study Design. A basic science study that used a porcine cervical spine model to produce disc prolapse subsequently exposed to an extension protocol. Objective. This study investigated whether extension or combined extension and side flexion could move the displaced portion of nucleus from the anulus towards the nucleus. Summary of Background Data. Previous research has established that repeated flexion can create disc prolapse, the question here is whether repeated extension can reverse the process. Methods. The C3/4 segments of 18 porcine cervical spines were dissected and potted in cups. Specimens were preloaded, then axially compressed (1472 N), and repeatedly rotated in either pure flexion or combined flexion and side flexion at a rate of 0.5°/s. Specimens that prolapsed were axially compressed and repeatedly and rotated into extension. Results. Based on a blinded radiologist's review of the radiograph images, all 18 specimens contained healthy discs before testing, but after testing 2 of the 18 specimens had endplate fractures, whereas 11 of the 18 specimens had prolapsed. Prolapsed nucleus was reduced in 5 of the 11 prolapsed specimens after the reversal testing, whereas the remaining 6 did not change. Subclassification analysis revealed that the prolapsed discs that centralized had significantly less disc height loss (P < 0.01). Neither the classification of the herniation (circumferential or radial) nor the angle of lordosis of the specimens was linked to the behavior of the specimens. Conclusion. This study showed that with repeated flexion, in porcine cervical spines, disc prolapse was initiated and that the displaced portion of nucleus can be directed back towards the center of the disc in response to particular active and passive movements/positions.
- 15 February 2009
- Published by Wolters Kluwer Health in Spine
- Vol. 34 (4) , 344-350
Disc Prolapse
Study Design. A basic science study that used a porcine cervical spine model to produce disc prolapse subsequently exposed to an extension protocol. Objective. This study investigated whether extension or combined extension and side flexion could move the displaced portion of nucleus from the anulus towards the nucleus. Summary of Background Data. Previous research has established that repeated flexion can create disc prolapse, the question here is whether repeated extension can reverse the process. Methods. The C3/4 segments of 18 porcine cervical spines were dissected and potted in cups. Specimens were preloaded, then axially compressed (1472 N), and repeatedly rotated in either pure flexion or combined flexion and side flexion at a rate of 0.5°/s. Specimens that prolapsed were axially compressed and repeatedly and rotated into extension. Results. Based on a blinded radiologist's review of the radiograph images, all 18 specimens contained healthy discs before testing, but after testing 2 of the 18 specimens had endplate fractures, whereas 11 of the 18 specimens had prolapsed. Prolapsed nucleus was reduced in 5 of the 11 prolapsed specimens after the reversal testing, whereas the remaining 6 did not change. Subclassification analysis revealed that the prolapsed discs that centralized had significantly less disc height loss (P < 0.01). Neither the classification of the herniation (circumferential or radial) nor the angle of lordosis of the specimens was linked to the behavior of the specimens. Conclusion. This study showed that with repeated flexion, in porcine cervical spines, disc prolapse was initiated and that the displaced portion of nucleus can be directed back towards the center of the disc in response to particular active and passive movements/positions.
- 1 January 2009
- Published by Elsevier in Archives of Physical Medicine and Rehabilitation
- Vol. 90 (1) , 118-126
Exercises for Spine Stabilization: Motion/Motor Patterns, Stability Progressions, and Clinical Technique
- 1 January 2009
- Published by Elsevier in Archives of Physical Medicine and Rehabilitation
- Vol. 90 (1) , 118-126
Exercises for Spine Stabilization: Motion/Motor Patterns, Stability Progressions, and Clinical Technique
- 1 January 2009
- Published by Taylor & Francis in Ergonomics
- Vol. 52 (1) , 80-86
Evolving ergonomics?
The theme developed in this position paper follows the current evolution of injury prevention in the backs of workers. Job change or ‘fitting the task to the person’ has come far, but will probably not result in zero injury rates. This is because the cause of injury is heavily influenced by the way that a worker moves. A review of injury mechanisms reveals the need for the biomechanist/ergonomist to incorporate features in biomechanical models that recognise these injury mechanisms. The implication of one such model is that the next leap toward a zero injury rate may be approached with ‘fitting the person to the task’ or at least retraining the way that workers move. A few examples of movement-based back injury prevention strategies are provided. Finally, some thoughts on implementing such an approach are expressed. This is a review and position paper written in honour of Professor Don Chaffin's career.
- 1 January 2009
- Published by Taylor & Francis in Ergonomics
- Vol. 52 (1) , 80-86
Evolving ergonomics?
The theme developed in this position paper follows the current evolution of injury prevention in the backs of workers. Job change or ‘fitting the task to the person’ has come far, but will probably not result in zero injury rates. This is because the cause of injury is heavily influenced by the way that a worker moves. A review of injury mechanisms reveals the need for the biomechanist/ergonomist to incorporate features in biomechanical models that recognise these injury mechanisms. The implication of one such model is that the next leap toward a zero injury rate may be approached with ‘fitting the person to the task’ or at least retraining the way that workers move. A few examples of movement-based back injury prevention strategies are provided. Finally, some thoughts on implementing such an approach are expressed. This is a review and position paper written in honour of Professor Don Chaffin's career.
- 1 June 2006
- Published by Wolters Kluwer Health in Spine
- Vol. 31 (13) , E387-E393
Effects of Abdominal Muscle Coactivation on the Externally Preloaded Trunk: Variations in Motor Control and Its Effect on Spine Stability
Study Design. A repeated measures biomechanical analysis of the effects of abdominal bracing in preparation for a quick release of the loaded trunk. Objectives. To quantify the ability of individuals to abdominally brace the externally loaded trunk, and assess their success in achieving and enhancing appropriate spine stability. Summary of Background Data. Spine stability requires trunk muscle coactivation, which demands motor control skill that differs across people and situations. The quick release protocol may offer insight into the motor control scheme and subsequent effect on spine stability. Methods. There were 10 individuals who sat, torso upright, in an apparatus designed to foster a neutral spine position. They were instructed to support a posteriorly directed load to the trunk in either their naturally chosen manner, or by activating the abdominal muscles to 10%, 20%, or 30% of maximum ability. The externally applied load was then quickly released, thereby unloading the participant. Muscle pre-activation patterns, spine stability, and kinematic measures of trunk stiffness were quantified. Results. Participants were able to stabilize their spine effectively by supporting the load in a naturally selected manner. Conscious, voluntary overdriving of this natural pattern often resulted in unbalanced muscular activation schemes and corresponding decreases in stability levels. Conclusions. Individuals in an externally loaded state appear to select a natural muscular activation pattern appropriate to maintain spine stability sufficiently. Conscious adjustments in individual muscles around this natural level may actually decrease the stability margin of safety.
- 1 June 2006
- Published by Wolters Kluwer Health in Spine
- Vol. 31 (13) , E387-E393
Effects of Abdominal Muscle Coactivation on the Externally Preloaded Trunk: Variations in Motor Control and Its Effect on Spine Stability
Study Design. A repeated measures biomechanical analysis of the effects of abdominal bracing in preparation for a quick release of the loaded trunk. Objectives. To quantify the ability of individuals to abdominally brace the externally loaded trunk, and assess their success in achieving and enhancing appropriate spine stability. Summary of Background Data. Spine stability requires trunk muscle coactivation, which demands motor control skill that differs across people and situations. The quick release protocol may offer insight into the motor control scheme and subsequent effect on spine stability. Methods. There were 10 individuals who sat, torso upright, in an apparatus designed to foster a neutral spine position. They were instructed to support a posteriorly directed load to the trunk in either their naturally chosen manner, or by activating the abdominal muscles to 10%, 20%, or 30% of maximum ability. The externally applied load was then quickly released, thereby unloading the participant. Muscle pre-activation patterns, spine stability, and kinematic measures of trunk stiffness were quantified. Results. Participants were able to stabilize their spine effectively by supporting the load in a naturally selected manner. Conscious, voluntary overdriving of this natural pattern often resulted in unbalanced muscular activation schemes and corresponding decreases in stability levels. Conclusions. Individuals in an externally loaded state appear to select a natural muscular activation pattern appropriate to maintain spine stability sufficiently. Conscious adjustments in individual muscles around this natural level may actually decrease the stability margin of safety.