Gerald G. Pereira
Research Subjects
Gerald G. Pereira has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Paul W. Cleary
CSIRO Data61
6 shared publications Paulus Lahur
CSIRO IMT, Clayton South, Australia
4 shared publicationsDavid Howard
CSIRO Data61, Clayton South, Australia
3 shared publicationsMichael Breedon
CSIRO Manufacturing, Clayton South, Australia
3 shared publicationsPhil Kilby
CSIRO Data61, Clayton South, Australia
3 shared publications- Bruce Ruishu Jin
School of Engineering and Technology, University of New South Wales, Canberra, ACT 2600, Australia
2 shared publications
Latest Publications
- Open Access
- 13 March 2026
- Published by Elsevier in International Journal of Heat and Fluid Flow
- Vol. 120
Improvement of spacer performance in membrane distillation via an adaptive mesh lattice Boltzmann model
- 13 March 2026
- Published by Elsevier in International Journal of Heat and Fluid Flow
- Vol. 120
Open AccessImprovement of spacer performance in membrane distillation via an adaptive mesh lattice Boltzmann model
- Open Access
- 2 March 2026
- Published by Elsevier in SSRN Electronic Journal
Recursive regularized phase-field lattice Boltzmann method for complex two-phase flows with high-density ratio and high Reynolds numbers
We develop a recursive regularised lattice Boltzmann method coupled with a phase-field approach for simulating three-dimensional two-phase flows at intermediate to high Reynolds numbers. Implemented within the open-source AMReX library, the solver leverages block-structured adaptive mesh refinement to efficiently capture multi-scale flow phenomena. The key innovation is a locally varying mobility parameter, defined as the interface width multiplied by the maximum of the local velocity magnitude and reference velocity, which dramatically reduces interface distortion in high-shear regions while maintaining stability at low velocities. Unlike previous phase-field lattice Boltzmann methods, the solver achieves second-order accuracy with a fixed interface width. Validation against canonical benchmarks—including Rayleigh-Taylor instability, rising bubbles, and Taylor bubbles—demonstrates robust handling of complex interfacial dynamics. Three-dimensional Taylor bubble simulations showcase accurate resolution of bubble breakup and coalescence across multiple length scales in confined geometries, confirming that the synergistic integration of regularised collisions, adaptive mobility, and mesh refinement provides an efficient framework for multiphase flows with intricate topological changes.
- 2 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessRecursive regularized phase-field lattice Boltzmann method for complex two-phase flows with high-density ratio and high Reynolds numbers
We develop a recursive regularised lattice Boltzmann method coupled with a phase-field approach for simulating three-dimensional two-phase flows at intermediate to high Reynolds numbers. Implemented within the open-source AMReX library, the solver leverages block-structured adaptive mesh refinement to efficiently capture multi-scale flow phenomena. The key innovation is a locally varying mobility parameter, defined as the interface width multiplied by the maximum of the local velocity magnitude and reference velocity, which dramatically reduces interface distortion in high-shear regions while maintaining stability at low velocities. Unlike previous phase-field lattice Boltzmann methods, the solver achieves second-order accuracy with a fixed interface width. Validation against canonical benchmarks—including Rayleigh-Taylor instability, rising bubbles, and Taylor bubbles—demonstrates robust handling of complex interfacial dynamics. Three-dimensional Taylor bubble simulations showcase accurate resolution of bubble breakup and coalescence across multiple length scales in confined geometries, confirming that the synergistic integration of regularised collisions, adaptive mobility, and mesh refinement provides an efficient framework for multiphase flows with intricate topological changes.
- 3 November 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1022, A28
Lift increment scaling and its failure due to the leading-edge vortex detachment transition for a flapping wing under perturbations
A heaving and pitching wing encountering effective angle-of-attack perturbations at the Reynolds numbers of 2000 and 20 000 is numerically studied by using an immersed boundary–lattice Boltzmann method. The perturbations are introduced as an abrupt heaving or pitching motion superposed on the baseline motion. It is found that the lift increment scales with the increase in the perturbation effective angle of attack, especially during the heaving perturbation. The pitching perturbation is more likely to disrupt this scaling due to the transition of the leading-edge vortex (LEV) detachment mechanism, where the detachment mechanism of the LEV transitions from bluff-body shedding dominant to vorticity layer eruption dominant. Despite the same variation in the effective angle of attack for the heaving and pitching perturbations, vorticity layer eruption is more likely to occur under the fast pitching perturbation. When the Reynolds number is increased to 20 000, the time histories of aerodynamic force are similar to those at the Reynolds number of 2000. Moreover, the boundary layer under the LEV is more resistant to the adverse pressure gradient, leading to greater variability in vorticity layer eruption.
- 3 November 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1022, A28
Lift increment scaling and its failure due to the leading-edge vortex detachment transition for a flapping wing under perturbations
A heaving and pitching wing encountering effective angle-of-attack perturbations at the Reynolds numbers of 2000 and 20 000 is numerically studied by using an immersed boundary–lattice Boltzmann method. The perturbations are introduced as an abrupt heaving or pitching motion superposed on the baseline motion. It is found that the lift increment scales with the increase in the perturbation effective angle of attack, especially during the heaving perturbation. The pitching perturbation is more likely to disrupt this scaling due to the transition of the leading-edge vortex (LEV) detachment mechanism, where the detachment mechanism of the LEV transitions from bluff-body shedding dominant to vorticity layer eruption dominant. Despite the same variation in the effective angle of attack for the heaving and pitching perturbations, vorticity layer eruption is more likely to occur under the fast pitching perturbation. When the Reynolds number is increased to 20 000, the time histories of aerodynamic force are similar to those at the Reynolds number of 2000. Moreover, the boundary layer under the LEV is more resistant to the adverse pressure gradient, leading to greater variability in vorticity layer eruption.
- Open Access
- 10 July 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1
Author Correction: Freeform generative design of complex functional structures
- 10 July 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1
Open AccessAuthor Correction: Freeform generative design of complex functional structures
- Open Access
- 24 May 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 11918
Freeform generative design of complex functional structures
Generative machine learning is poised to revolutionise a range of domains where rational design has long been the de facto approach: where design is practically a time consuming and frustrating process guided by heuristics and intuition. In this article we focus on the domain of flow chemistry, which is an ideal candidate for generative design approaches. We demonstrate a generative machine learning framework that optimises diverse, bespoke reactor elements for flow chemistry applications, combining evolutionary algorithms and a scalable fluid dynamics solver for in silico performance assessment. Experimental verification confirms the discovery of never-before-seen bespoke mixers whose performance exceeds the state of the art by 45%. These findings highlight the power of autonomous generative design to improve the operational performance of complex functional structures, with potential wide-ranging industrial applications.
- 24 May 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 11918
Open AccessFreeform generative design of complex functional structures
Generative machine learning is poised to revolutionise a range of domains where rational design has long been the de facto approach: where design is practically a time consuming and frustrating process guided by heuristics and intuition. In this article we focus on the domain of flow chemistry, which is an ideal candidate for generative design approaches. We demonstrate a generative machine learning framework that optimises diverse, bespoke reactor elements for flow chemistry applications, combining evolutionary algorithms and a scalable fluid dynamics solver for in silico performance assessment. Experimental verification confirms the discovery of never-before-seen bespoke mixers whose performance exceeds the state of the art by 45%. These findings highlight the power of autonomous generative design to improve the operational performance of complex functional structures, with potential wide-ranging industrial applications.
- Open Access
- 7 November 2023
- Published by Springer Nature in Research Square
Freeform Generative Design of Complex Functional Structures
Generative machine learning is poised to revolutionise a range of domains where rational design has long been the de facto approach: where design is practically a time consuming and frustrating process guided by heuristics and intuition. In this article we focus on the domain of flow chemistry, which is an ideal candidate for generative design approaches. We demonstrate a generative machine learning framework that optimises diverse, bespoke reactor elements for flow chemistry applications, combining evolutionary algorithms and a scalable fluid dynamics solver for in silico performance assessment. Experimental verification confirms the discovery of never-before-seen bespoke mixers whose performance exceeds the state of the art by 45%. These findings highlight the power of autonomous generative design to improve the operational performance of complex functional structures, with potential wide-ranging industrial applications.
- 7 November 2023
- Published by Springer Nature in Research Square
Open AccessFreeform Generative Design of Complex Functional Structures
Generative machine learning is poised to revolutionise a range of domains where rational design has long been the de facto approach: where design is practically a time consuming and frustrating process guided by heuristics and intuition. In this article we focus on the domain of flow chemistry, which is an ideal candidate for generative design approaches. We demonstrate a generative machine learning framework that optimises diverse, bespoke reactor elements for flow chemistry applications, combining evolutionary algorithms and a scalable fluid dynamics solver for in silico performance assessment. Experimental verification confirms the discovery of never-before-seen bespoke mixers whose performance exceeds the state of the art by 45%. These findings highlight the power of autonomous generative design to improve the operational performance of complex functional structures, with potential wide-ranging industrial applications.
- Open Access
- 1 August 2023
- Published by Modelling and Simulation Society of Australia and New Zealand
Using Lindenmayer systems for evolutionary design of static mixers
- 1 August 2023
- Published by Modelling and Simulation Society of Australia and New Zealand
Open AccessUsing Lindenmayer systems for evolutionary design of static mixers
- 1 June 2022
- Published by Global Science Press in Communications in Computational Physics
- Vol. 32 (4) , 1156-1178
A Pseudopotential Lattice Boltzmann Analysis for Multicomponent Flow
This paper presents a pseudopotential lattice Boltzmann analysis to show the deficiency of previous pseudopotential models, i.e., inconsistency between equilibrium velocity and mixture velocity. To rectify this problem, there are two strategies: decoupling relaxation time and kinematic viscosity or introducing a system mixture relaxation time. Then, we constructed two modified models: a two-relaxation-time (TRT) scheme and a triple-relaxation-time (TriRT) scheme to decouple the relaxation time and kinematic viscosity. Meanwhile, inspired by the idea of a system mixture relaxation time, we developed three mixture models under different collision schemes, viz. mix-SRT, mix-TRT, and mix-TriRT models. Afterwards, we derived the advection-diffusion equation for the multicomponent system and derived the mutual diffusivity in a binary mixture. Finally, we conducted several numerical simulations to validate the analysis on these models. The numerical results show that these models can obtain smaller spurious currents than previous models and have a wider range for the accessible viscosity ratio with fourth-order isotropy. Compared to previous models, present models avoid complex matrix operations and only fourth-order isotropy is required. The increased simplicity and higher computational efficiency of these models make them easy to apply to engineering and industrial applications. Lattice Boltzmann method, multicomponent flows, Chapman-Enskog analysis. 76M28, 76T06 COPYRIGHT: © Global Science Press
- 1 June 2022
- Published by Global Science Press in Communications in Computational Physics
- Vol. 32 (4) , 1156-1178
A Pseudopotential Lattice Boltzmann Analysis for Multicomponent Flow
This paper presents a pseudopotential lattice Boltzmann analysis to show the deficiency of previous pseudopotential models, i.e., inconsistency between equilibrium velocity and mixture velocity. To rectify this problem, there are two strategies: decoupling relaxation time and kinematic viscosity or introducing a system mixture relaxation time. Then, we constructed two modified models: a two-relaxation-time (TRT) scheme and a triple-relaxation-time (TriRT) scheme to decouple the relaxation time and kinematic viscosity. Meanwhile, inspired by the idea of a system mixture relaxation time, we developed three mixture models under different collision schemes, viz. mix-SRT, mix-TRT, and mix-TriRT models. Afterwards, we derived the advection-diffusion equation for the multicomponent system and derived the mutual diffusivity in a binary mixture. Finally, we conducted several numerical simulations to validate the analysis on these models. The numerical results show that these models can obtain smaller spurious currents than previous models and have a wider range for the accessible viscosity ratio with fourth-order isotropy. Compared to previous models, present models avoid complex matrix operations and only fourth-order isotropy is required. The increased simplicity and higher computational efficiency of these models make them easy to apply to engineering and industrial applications. Lattice Boltzmann method, multicomponent flows, Chapman-Enskog analysis. 76M28, 76T06 COPYRIGHT: © Global Science Press
- Open Access
- 1 April 2022
- Published by AIP Publishing in AIP Advances
- Vol. 12 (4) , 045314
Pseudo-potential lattice Boltzmann model for large density and viscosity ratio fluids
The flow of two immiscible fluid components with large density and viscosity ratios is considered. Using the pseudo-potential lattice Boltzmann model with a non-ideal equation of state and a mixture viscosity formulation, we can develop a model that successfully passes a series of benchmark tests, most importantly co-current layered flows, with no discontinuities in the velocity profiles at interfaces. The model is then applied to applications of bubbles rising in denser fluids and shows good quantitative agreement with previous numerical and experimental results. The model is also applied to the flow of two immiscible fluids in a porous medium and shows characteristics that are physically consistent with established experimental observations.
- 1 April 2022
- Published by AIP Publishing in AIP Advances
- Vol. 12 (4) , 045314
Open AccessPseudo-potential lattice Boltzmann model for large density and viscosity ratio fluids
The flow of two immiscible fluid components with large density and viscosity ratios is considered. Using the pseudo-potential lattice Boltzmann model with a non-ideal equation of state and a mixture viscosity formulation, we can develop a model that successfully passes a series of benchmark tests, most importantly co-current layered flows, with no discontinuities in the velocity profiles at interfaces. The model is then applied to applications of bubbles rising in denser fluids and shows good quantitative agreement with previous numerical and experimental results. The model is also applied to the flow of two immiscible fluids in a porous medium and shows characteristics that are physically consistent with established experimental observations.
- Open Access
- 28 March 2022
- Published by MDPI AG in Geosciences
- Vol. 12 (4) , 153
Numerical Modelling of Reactive Flows through Porous Media
We consider a lattice Boltzmann (LB) model to solve the coupled Navier–Stokes and advection–diffusion equation with reactive boundary conditions at the interface between fluid and solid domains. The reactive boundary condition results in the position of the boundary changing continuously, and so boundary nodes may be partially filled with fluid at any instant. We develop the LB boundary conditions for both the velocity and concentration fields in the presence of partially filled boundary nodes and then validate this algorithm on some test cases—the Stefan problem for diffusion-dominated dissolution and kinetic-dominated dissolution. It is shown that the developed model agrees well with analytic results, so that they can be used for more general boundaries of arbitrary shape. Numerical simulations in three dimensions are then carried out on demonstration problems at various Peclet numbers to elucidate the transport mechanisms and their influence on solid grain dissolution.
- 28 March 2022
- Published by MDPI AG in Geosciences
- Vol. 12 (4) , 153
Open AccessNumerical Modelling of Reactive Flows through Porous Media
We consider a lattice Boltzmann (LB) model to solve the coupled Navier–Stokes and advection–diffusion equation with reactive boundary conditions at the interface between fluid and solid domains. The reactive boundary condition results in the position of the boundary changing continuously, and so boundary nodes may be partially filled with fluid at any instant. We develop the LB boundary conditions for both the velocity and concentration fields in the presence of partially filled boundary nodes and then validate this algorithm on some test cases—the Stefan problem for diffusion-dominated dissolution and kinetic-dominated dissolution. It is shown that the developed model agrees well with analytic results, so that they can be used for more general boundaries of arbitrary shape. Numerical simulations in three dimensions are then carried out on demonstration problems at various Peclet numbers to elucidate the transport mechanisms and their influence on solid grain dissolution.