Ho Sang Kwak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ho Sang Kwak has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Kyoungjin Kim
Kumoh Natl Inst Technol, Dept Mech Syst Engn, Gumi, South Korea
5 shared publicationsDongjoo Kim
2 shared publications- Jae Min Hyun
Department of Mechanical Engineering, Korea Advanced Institute of Science & Technology, 373-1 Kusong-Dong, Yusung-gu, Taejon 305-701, South Korea
2 shared publications Tae-Ho Song
KAIST
2 shared publicationsByoung Chul Son
School of Mechanical Engineering, Kumoh National Institute of Technology, 1 Yangho, Gumi, Gyeongbuk, Korea
1 shared publicationGyu Jin Park
School of Mechanical Engineering, Kumoh National Institute of Technology, 1 Yangho, Gumi, Gyeongbuk, Korea
1 shared publication
Latest Publications
- 30 April 2019
- Published by The Korean Society of Mechanical Engineers in Transactions of the Korean Society of Mechanical Engineers - B
- Vol. 43 (4) , 249-259
A Computational Study on the Three-Dimensional Reacting Flow to Simulate GaN Deposition in a Shallow Closed-Coupled Showerhead MOCVD System
LED 광원 제조에 많이 사용되는 CCS MOCVD 반응기에서 GaN 박막을 만드는 증착 공정에 대한 수치연구를 수행하였다. 수송기체인 수소와 혼합된 기상의 유기금속 원료 TMG와 반응기체 암모니아가 다수의 소형 노즐을 통해 반응로에 개별적으로 주입된 후 형성되는 3차원 유동과 열 및 물질전달, 화학반응을 상용 전산유체역학 코드를 이용하여 해석하였다. 수치해석 결과는 간이 화학반응 모델을 이용하여 GaN 증착률의 예측이 가능함을 보여주었다. 국소 증착률은 반응에 관여하는 주 화학종의 농도분포와 연관관계가 있으며, 노즐에서 주입되는 기체의 관성력에 기인한 국소적인 3차원적 농도분포가 증착불균일도를 높이는 요인이 될 수 있음을 파악하였다. 일련의 수치실험을 통하여 공정 조건인 유량, 작동압력, 원판 회전수가 증착률과 증착 균일도에 미치는 영향을 조사하여 최적운전 지침을 제공하였다. LED 광원 제조에 많이 사용되는 CCS MOCVD 반응기에서 GaN 박막을 만드는 증착 공정에 대한 수치연구를 수행하였다. 수송기체인 수소와 혼합된 기상의 유기금속 원료 TMG와 반응기체 암모니아가 다수의 소형 노즐을 통해 반응로에 개별적으로 주입된 후 형성되는 3차원 유동과 열 및 물질전달, 화학반응을 상용 전산유체역학 코드를 이용하여 해석하였다. 수치
- 30 April 2019
- Published by The Korean Society of Mechanical Engineers in Transactions of the Korean Society of Mechanical Engineers - B
- Vol. 43 (4) , 249-259
A Computational Study on the Three-Dimensional Reacting Flow to Simulate GaN Deposition in a Shallow Closed-Coupled Showerhead MOCVD System
LED 광원 제조에 많이 사용되는 CCS MOCVD 반응기에서 GaN 박막을 만드는 증착 공정에 대한 수치연구를 수행하였다. 수송기체인 수소와 혼합된 기상의 유기금속 원료 TMG와 반응기체 암모니아가 다수의 소형 노즐을 통해 반응로에 개별적으로 주입된 후 형성되는 3차원 유동과 열 및 물질전달, 화학반응을 상용 전산유체역학 코드를 이용하여 해석하였다. 수치해석 결과는 간이 화학반응 모델을 이용하여 GaN 증착률의 예측이 가능함을 보여주었다. 국소 증착률은 반응에 관여하는 주 화학종의 농도분포와 연관관계가 있으며, 노즐에서 주입되는 기체의 관성력에 기인한 국소적인 3차원적 농도분포가 증착불균일도를 높이는 요인이 될 수 있음을 파악하였다. 일련의 수치실험을 통하여 공정 조건인 유량, 작동압력, 원판 회전수가 증착률과 증착 균일도에 미치는 영향을 조사하여 최적운전 지침을 제공하였다. LED 광원 제조에 많이 사용되는 CCS MOCVD 반응기에서 GaN 박막을 만드는 증착 공정에 대한 수치연구를 수행하였다. 수송기체인 수소와 혼합된 기상의 유기금속 원료 TMG와 반응기체 암모니아가 다수의 소형 노즐을 통해 반응로에 개별적으로 주입된 후 형성되는 3차원 유동과 열 및 물질전달, 화학반응을 상용 전산유체역학 코드를 이용하여 해석하였다. 수치
- 1 August 2013
- Published by American Scientific Publishers in Advanced Science Letters
- Vol. 19 (8) , 2215-2219
Effects of Air Entrainment on Glass Fiber Cooling with Helium Injection in Optical Fiber Drawing
In modern high speed optical fiber manufacturing, it is essential to sufficiently cool down freshly drawn glass fibers from the heated and softened silica preform in draw furnace. Thus, at higher fiber drawing speed, a dedicated cooling unit with the use of helium injection is required to significantly enhance the cooling of hot glass fiber. This study adopts two-dimensional axisymmetric computations of flowfield and heat transfer characteristics on cooling gas of helium/air mixture and fast moving glass fiber. The effects of helium injection rate and fiber drawing speed on the glass fiber cooling is discussed. The air entrainment at the glass fiber inlet is found to be an important factor on the effectiveness of glass fiber cooling by deciding the helium purity in cooling gas. The results reveal a critical helium injection rate where the cooling does not improve any more above this critical value. Also, helium injection in aiding direction is more effective than that in opposing direction for glass fiber cooling.
- 1 August 2013
- Published by American Scientific Publishers in Advanced Science Letters
- Vol. 19 (8) , 2215-2219
Effects of Air Entrainment on Glass Fiber Cooling with Helium Injection in Optical Fiber Drawing
In modern high speed optical fiber manufacturing, it is essential to sufficiently cool down freshly drawn glass fibers from the heated and softened silica preform in draw furnace. Thus, at higher fiber drawing speed, a dedicated cooling unit with the use of helium injection is required to significantly enhance the cooling of hot glass fiber. This study adopts two-dimensional axisymmetric computations of flowfield and heat transfer characteristics on cooling gas of helium/air mixture and fast moving glass fiber. The effects of helium injection rate and fiber drawing speed on the glass fiber cooling is discussed. The air entrainment at the glass fiber inlet is found to be an important factor on the effectiveness of glass fiber cooling by deciding the helium purity in cooling gas. The results reveal a critical helium injection rate where the cooling does not improve any more above this critical value. Also, helium injection in aiding direction is more effective than that in opposing direction for glass fiber cooling.
- 15 April 2012
- Published by American Scientific Publishers in Advanced Science Letters
- Vol. 8 (1) , 439-444
High-Speed Glass Fiber Drawing from Heated and Softened Silica Preform in an Optical Fiber Draw Furnace
Modern manufacturing of optical fibers starts with the glass fiber drawing process from the highly purified silica preform in a draw furnace. A preform of rod shape is continuously fed into the furnace, and very thin glass fiber is pulled from the heated and softened preform by applying a proper amount of draw tension, while the neck-down region of preform experiences a drastic diameter change. In this article, heating of preform in neck-down region and glass fiber drawing from the softened preform is numerically simulated by using the iterative computational scheme between the one-dimensional model for preform neck-down profile and the two-dimensional flow and heat transfer computations on the helium/argon working gas and preform inside the inner furnace geometry of preform feeding, preform heating, and glass fiber cooling tubes. The computational results for the typical glass fiber drawing conditions yield the expected preform neck-down profile and the draw tension on the glass fiber. The effects of the heating conditions of the furnace heating element such as heating temperature and heating width on the glass fiber drawing process are also studied and discussed in order to investigate the working conditions of a high speed optical fiber drawing system.
- 15 April 2012
- Published by American Scientific Publishers in Advanced Science Letters
- Vol. 8 (1) , 439-444
High-Speed Glass Fiber Drawing from Heated and Softened Silica Preform in an Optical Fiber Draw Furnace
Modern manufacturing of optical fibers starts with the glass fiber drawing process from the highly purified silica preform in a draw furnace. A preform of rod shape is continuously fed into the furnace, and very thin glass fiber is pulled from the heated and softened preform by applying a proper amount of draw tension, while the neck-down region of preform experiences a drastic diameter change. In this article, heating of preform in neck-down region and glass fiber drawing from the softened preform is numerically simulated by using the iterative computational scheme between the one-dimensional model for preform neck-down profile and the two-dimensional flow and heat transfer computations on the helium/argon working gas and preform inside the inner furnace geometry of preform feeding, preform heating, and glass fiber cooling tubes. The computational results for the typical glass fiber drawing conditions yield the expected preform neck-down profile and the draw tension on the glass fiber. The effects of the heating conditions of the furnace heating element such as heating temperature and heating width on the glass fiber drawing process are also studied and discussed in order to investigate the working conditions of a high speed optical fiber drawing system.
- 1 August 2011
- Published by IOP Publishing in Fluid Dynamics Research
- Vol. 43 (4)
A numerical model for simulating electroosmotic micro- and nanochannel flows under non-Boltzmann equilibrium
- 1 August 2011
- Published by IOP Publishing in Fluid Dynamics Research
- Vol. 43 (4)
A numerical model for simulating electroosmotic micro- and nanochannel flows under non-Boltzmann equilibrium
- 20 February 2011
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 376 (1-3) , 53-58
Assessment of mixing problem on the EOF with thermal effects
- 20 February 2011
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 376 (1-3) , 53-58
Assessment of mixing problem on the EOF with thermal effects
- 17 June 2010
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 8 (1) , 35-44
Theoretical prediction on double-layer coating in wet-on-wet optical fiber coating process
- 17 June 2010
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 8 (1) , 35-44
Theoretical prediction on double-layer coating in wet-on-wet optical fiber coating process
- 1 July 2009
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 335 (1) , 123-129
Thermal control of electroosmotic flow in a microchannel through temperature-dependent properties
- 1 July 2009
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 335 (1) , 123-129
Thermal control of electroosmotic flow in a microchannel through temperature-dependent properties
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 84, 4897-4901
Design of a Hot Plate with Rapid Cooling Capability for Thermal Nanoimprint Lithography
A hot plate device has been designed as a thermal treatment tool for the press-type hot embossing nanoimprinting machine which copies the nanopatterns on stamp to polymer substrate. Design goal is to achieve the performance of rapid heating and cooling, and high temperature uniformity as well as the strength to endure high stamping pressure. Analysis of design requirements leads to a new hot plate configuration having cooling holes and cartridge heaters which are straight and arranged in parallel for scalability toward large area. Zone control method is adopted to ensure high temperature uniformity. Numerical computation has been conducted for assessing the feasibility of design concept. Parallel experiments have also been performed for verifying thermal performance of the proposed design. The results are discussed in view of searching the best configuration for thermal control of device
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 84, 4897-4901
Design of a Hot Plate with Rapid Cooling Capability for Thermal Nanoimprint Lithography
A hot plate device has been designed as a thermal treatment tool for the press-type hot embossing nanoimprinting machine which copies the nanopatterns on stamp to polymer substrate. Design goal is to achieve the performance of rapid heating and cooling, and high temperature uniformity as well as the strength to endure high stamping pressure. Analysis of design requirements leads to a new hot plate configuration having cooling holes and cartridge heaters which are straight and arranged in parallel for scalability toward large area. Zone control method is adopted to ensure high temperature uniformity. Numerical computation has been conducted for assessing the feasibility of design concept. Parallel experiments have also been performed for verifying thermal performance of the proposed design. The results are discussed in view of searching the best configuration for thermal control of device
- 25 May 2001
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 39 (7) , 723-736
BUOYANT CONVECTION IN A CAVITY WITH A BAFFLE UNDER TIME-PERIODIC WALL TEMPERATURE
A numerical study is made of buoyant convection at high Rayleigh number in a square cavity that contains a horizontal baffle at midheight. The horizontal walls of the cavity are insulated. At the cold left vertical wall, the nondimensional temperature is constant = 0, and at the hot right vertical wall, the wall temperature is time periodic, = 1 + sin. Numerical solutions to the Navier-Stokes equations are secured. The length of the baffle is such that, in the basic state ( = 0), the baffle does not touch the vertical boundary layers. The flow and temperature characteristics of the basic state remain largely unaffected by the presence of the baffle. For the oscillating cases ( ≠ 0), the amplitude of fluctuating heat transfer rate across the cavity centerline is substantially reduced by the presence of the baffle. These changes in fluctuating flow characteristics are influenced appreciably by the thermal conductivity and the vertical location of the baffle. The oscillating flow and thermal fields are seen to be confined to the upper interior region between the top wall of cavity and the baffle. Sequential pictures are obtained of the evolutionary process of the disturbances. The physical interpretations, together with the prediction of the resonance frequency, are consistent with Kwak and Hyun's earlier argument.
- 25 May 2001
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 39 (7) , 723-736
BUOYANT CONVECTION IN A CAVITY WITH A BAFFLE UNDER TIME-PERIODIC WALL TEMPERATURE
A numerical study is made of buoyant convection at high Rayleigh number in a square cavity that contains a horizontal baffle at midheight. The horizontal walls of the cavity are insulated. At the cold left vertical wall, the nondimensional temperature is constant = 0, and at the hot right vertical wall, the wall temperature is time periodic, = 1 + sin. Numerical solutions to the Navier-Stokes equations are secured. The length of the baffle is such that, in the basic state ( = 0), the baffle does not touch the vertical boundary layers. The flow and temperature characteristics of the basic state remain largely unaffected by the presence of the baffle. For the oscillating cases ( ≠ 0), the amplitude of fluctuating heat transfer rate across the cavity centerline is substantially reduced by the presence of the baffle. These changes in fluctuating flow characteristics are influenced appreciably by the thermal conductivity and the vertical location of the baffle. The oscillating flow and thermal fields are seen to be confined to the upper interior region between the top wall of cavity and the baffle. Sequential pictures are obtained of the evolutionary process of the disturbances. The physical interpretations, together with the prediction of the resonance frequency, are consistent with Kwak and Hyun's earlier argument.
- 1 March 1998
- Published by Taylor & Francis in Geophysical & Astrophysical Fluid Dynamics
- Vol. 87 (1) , 81-109
Symmetric flow of a modified hadley cell model with a free surface
- 1 March 1998
- Published by Taylor & Francis in Geophysical & Astrophysical Fluid Dynamics
- Vol. 87 (1) , 81-109
Symmetric flow of a modified hadley cell model with a free surface