J. P. Wittmer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
J. P. Wittmer has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
A. Cavallo
Institut Charles Sadron 23 rue du Loess 67037 Strasbourg Cédex France
5 shared publicationsH. Meyer
Institut Charles Sadron, 67083 Strasbourg CEDEX, France
5 shared publicationsP. Beckrich
Institut Charles Sadron, 67083 Strasbourg CEDEX, France
5 shared publicationsA. Johner
Institut Charles Sadron 23 rue du Loess 67037 Strasbourg Cédex France
4 shared publicationsF. Crevel
Institut Charles Sadron, 67083 Strasbourg CEDEX, France
4 shared publicationsT. Kreer
Institut Charles Sadron 23 rue du Loess 67037 Strasbourg Cédex France
4 shared publications
Latest Publications
- Open Access
A finite excluded volume bond-fluctuation model: Static properties of dense polymer melts revisited
The classical bond-fluctuation model (BFM) is an efficient lattice Monte Carlo algorithm for coarse-grained polymer chains where each monomer occupies exclusively a certain number of lattice sites. In this paper we propose a generalization of the BFM where we relax this constraint and allow the overlap of monomers subject to a finite energy penalty $\overlap$. This is done to vary systematically the dimensionless compressibility $g$ of the solution in order to investigate the influence of density fluctuations in dense polymer melts on various s tatic properties at constant overall monomer density. The compressibility is obtained directly from the low-wavevector limit of the static structure fa ctor. We consider, e.g., the intrachain bond-bond correlation function, $P(s)$, of two bonds separated by $s$ monomers along the chain. It is shown that the excluded volume interactions are never fully screened for very long chains. If distances smaller than the thermal blob size are probed ($s \ll g$) the chains are swollen acc ording to the classical Fixman expansion where, e.g., $P(s) \sim g^{-1}s^{-1/2}$. More importantly, the polymers behave on larger distances ($s \gg g$) like swollen chains of incompressible blobs with $P(s) \si m g^0s^{-3/2}$.Open AccessA finite excluded volume bond-fluctuation model: Static properties of dense polymer melts revisited
The classical bond-fluctuation model (BFM) is an efficient lattice Monte Carlo algorithm for coarse-grained polymer chains where each monomer occupies exclusively a certain number of lattice sites. In this paper we propose a generalization of the BFM where we relax this constraint and allow the overlap of monomers subject to a finite energy penalty $\overlap$. This is done to vary systematically the dimensionless compressibility $g$ of the solution in order to investigate the influence of density fluctuations in dense polymer melts on various s tatic properties at constant overall monomer density. The compressibility is obtained directly from the low-wavevector limit of the static structure fa ctor. We consider, e.g., the intrachain bond-bond correlation function, $P(s)$, of two bonds separated by $s$ monomers along the chain. It is shown that the excluded volume interactions are never fully screened for very long chains. If distances smaller than the thermal blob size are probed ($s \ll g$) the chains are swollen acc ording to the classical Fixman expansion where, e.g., $P(s) \sim g^{-1}s^{-1/2}$. More importantly, the polymers behave on larger distances ($s \gg g$) like swollen chains of incompressible blobs with $P(s) \si m g^0s^{-3/2}$. - Open Access
- 10 August 2009
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 131 (6) , 064901
A finite excluded volume bond-fluctuation model: Static properties of dense polymer melts revisited
The classical bond-fluctuation model (BFM) is an efficient lattice Monte Carlo algorithm for coarse-grained polymer chains where each monomer occupies exclusively a certain number of lattice sites. In this paper we propose a generalization of the BFM where we relax this constraint and allow the overlap of monomers subject to a finite energy penalty ε. This is done to vary systematically the dimensionless compressibility g of the solution in order to investigate the influence of density fluctuations in dense polymer melts on various static properties at constant overall monomer density. The compressibility is obtained directly from the low-wave vector limit of the static structure factor. We consider, e.g., the intrachain bond-bond correlation function P(s) of two bonds separated by s monomers along the chain. It is shown that the excluded volume interactions are never fully screened for very long chains. If distances smaller than the thermal blob size are probed (s⪡g) the chains are swollen according to the classical Fixman expansion where, e.g., P(s)∼g−1s−1/2. More importantly, the polymers behave on larger distances (s⪢g) like swollen chains of incompressible blobs with P(s)∼g0s−3/2.
- 10 August 2009
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 131 (6) , 064901
Open AccessA finite excluded volume bond-fluctuation model: Static properties of dense polymer melts revisited
The classical bond-fluctuation model (BFM) is an efficient lattice Monte Carlo algorithm for coarse-grained polymer chains where each monomer occupies exclusively a certain number of lattice sites. In this paper we propose a generalization of the BFM where we relax this constraint and allow the overlap of monomers subject to a finite energy penalty ε. This is done to vary systematically the dimensionless compressibility g of the solution in order to investigate the influence of density fluctuations in dense polymer melts on various static properties at constant overall monomer density. The compressibility is obtained directly from the low-wave vector limit of the static structure factor. We consider, e.g., the intrachain bond-bond correlation function P(s) of two bonds separated by s monomers along the chain. It is shown that the excluded volume interactions are never fully screened for very long chains. If distances smaller than the thermal blob size are probed (s⪡g) the chains are swollen according to the classical Fixman expansion where, e.g., P(s)∼g−1s−1/2. More importantly, the polymers behave on larger distances (s⪢g) like swollen chains of incompressible blobs with P(s)∼g0s−3/2.
- 31 July 2007
- Published by Elsevier in Computer Physics Communications
- Vol. 177 (1-2) , 146-149
Are polymer melts “ideal”?
- 31 July 2007
- Published by Elsevier in Computer Physics Communications
- Vol. 177 (1-2) , 146-149
Are polymer melts “ideal”?
- Open Access
- 12 July 2007
- Published by American Physical Society (APS) in Physical Review E
- Vol. 76 (1) , 011803
Intramolecular long-range correlations in polymer melts: The segmental size distribution and its moments
We present theoretical arguments and numerical results to demonstrate long-range intrachain correlations in concentrated solutions and melts of long flexible polymers, which cause a systematic swelling of short chain segments. They can be traced back to the incompressibility of the melt leading to an effective repulsion when connecting two segments together where denotes the curvilinear length of a segment, its typical size, the “swelling coefficient,” the effective bond length, and the monomer density. The relative deviation of the segmental size distribution from the ideal Gaussian chain behavior is found to be proportional to . The analysis of different moments of this distribution allows for a precise determination of the effective bond length and the swelling coefficient of asymptotically long chains. At striking variance to the short-range decay suggested by Flory’s ideality hypothesis the bond-bond correlation function of two bonds separated by monomers along the chain is found to decay algebraically as . Effects of finite chain length are briefly considered.- 12 July 2007
- Published by American Physical Society (APS) in Physical Review E
- Vol. 76 (1) , 011803
Open AccessIntramolecular long-range correlations in polymer melts: The segmental size distribution and its moments
We present theoretical arguments and numerical results to demonstrate long-range intrachain correlations in concentrated solutions and melts of long flexible polymers, which cause a systematic swelling of short chain segments. They can be traced back to the incompressibility of the melt leading to an effective repulsion when connecting two segments together where denotes the curvilinear length of a segment, its typical size, the “swelling coefficient,” the effective bond length, and the monomer density. The relative deviation of the segmental size distribution from the ideal Gaussian chain behavior is found to be proportional to . The analysis of different moments of this distribution allows for a precise determination of the effective bond length and the swelling coefficient of asymptotically long chains. At striking variance to the short-range decay suggested by Flory’s ideality hypothesis the bond-bond correlation function of two bonds separated by monomers along the chain is found to decay algebraically as . Effects of finite chain length are briefly considered. - Open Access
Intramolecular long-range correlations in polymer melts: The segmental size distribution and its moments
Presenting theoretical arguments and numerical results we demonstrate long-range intrachain correlations in concentrated solutions and melts of long flexible polymers which cause a systematic swelling of short chain segments. They can be traced back to the incompressibility of the melt leading to an effective repulsion $u(s) \approx s/\rho R^3(s) \approx ce/\sqrt{s}$ when connecting two segments together where $s$ denotes the curvilinear length of a segment, $R(s)$ its typical size, $ce \approx 1/\rho be^3$ the ``swelling coefficient", $be$ the effective bond length and $\rho$ the monomer density. The relative deviation of the segmental size distribution from the ideal Gaussian chain behavior is found to be proportional to $u(s)$. The analysis of different moments of this distribution allows for a precise determination of the effective bond length $be$ and the swelling coefficient $ce$ of asymptotically long chains. At striking variance to the short-range decay suggested by Flory's ideality hypothesis the bond-bond correlation function of two bonds separated by $s$ monomers along the chain is found to decay algebraically as $1/s^{3/2}$. Effects of finite chain length are considered briefly.Open AccessIntramolecular long-range correlations in polymer melts: The segmental size distribution and its moments
Presenting theoretical arguments and numerical results we demonstrate long-range intrachain correlations in concentrated solutions and melts of long flexible polymers which cause a systematic swelling of short chain segments. They can be traced back to the incompressibility of the melt leading to an effective repulsion $u(s) \approx s/\rho R^3(s) \approx ce/\sqrt{s}$ when connecting two segments together where $s$ denotes the curvilinear length of a segment, $R(s)$ its typical size, $ce \approx 1/\rho be^3$ the ``swelling coefficient", $be$ the effective bond length and $\rho$ the monomer density. The relative deviation of the segmental size distribution from the ideal Gaussian chain behavior is found to be proportional to $u(s)$. The analysis of different moments of this distribution allows for a precise determination of the effective bond length $be$ and the swelling coefficient $ce$ of asymptotically long chains. At striking variance to the short-range decay suggested by Flory's ideality hypothesis the bond-bond correlation function of two bonds separated by $s$ monomers along the chain is found to decay algebraically as $1/s^{3/2}$. Effects of finite chain length are considered briefly. - Open Access
Why polymer chains in a melt are not random walks
A cornerstone of modern polymer physics is the `Flory ideality hypothesis' which states that a chain in a polymer melt adopts `ideal' random-walk-like conformations. Here we revisit theoretically and numerically this pivotal assumption and demonstrate that there are noticeable deviations from ideality. The deviations come from the interplay of chain connectivity and the incompressibility of the melt, leading to an effective repulsion between chain segments of all sizes $s$. The amplitude of this repulsion increases with decreasing $s$ where chain segments become more and more swollen. We illustrate this swelling by an analysis of the form factor $F(q)$, i.e. the scattered intensity at wavevector $q$ resulting from intramolecular interferences of a chain. A `Kratky plot' of $q^2F(q)$ {\em vs.} $q$ does not exhibit the plateau for intermediate wavevectors characteristic of ideal chains. One rather finds a conspicuous depression of the plateau, $\delta(F^{-1}(q)) = |q|^3/32\rho$, which increases with $q$ and only depends on the monomer density $\rho$.Open AccessWhy polymer chains in a melt are not random walks
A cornerstone of modern polymer physics is the `Flory ideality hypothesis' which states that a chain in a polymer melt adopts `ideal' random-walk-like conformations. Here we revisit theoretically and numerically this pivotal assumption and demonstrate that there are noticeable deviations from ideality. The deviations come from the interplay of chain connectivity and the incompressibility of the melt, leading to an effective repulsion between chain segments of all sizes $s$. The amplitude of this repulsion increases with decreasing $s$ where chain segments become more and more swollen. We illustrate this swelling by an analysis of the form factor $F(q)$, i.e. the scattered intensity at wavevector $q$ resulting from intramolecular interferences of a chain. A `Kratky plot' of $q^2F(q)$ {\em vs.} $q$ does not exhibit the plateau for intermediate wavevectors characteristic of ideal chains. One rather finds a conspicuous depression of the plateau, $\delta(F^{-1}(q)) = |q|^3/32\rho$, which increases with $q$ and only depends on the monomer density $\rho$. - Open Access
Are polymer melts "ideal"?
It is commonly accepted that in concentrated solutions or melts high-molecular weight polymers display random-walk conformational properties without long-range correlations between subsequent bonds. This absence of memory means, for instance, that the bond-bond correlation function, $P(s)$, of two bonds separated by $s$ monomers along the chain should exponentially decay with $s$. Presenting numerical results and theoretical arguments for both monodisperse chains and self-assembled (essentially Flory size-distributed) equilibrium polymers we demonstrate that some long-range correlations remain due to self-interactions of the chains caused by the chain connectivity and the incompressibility of the melt. Suggesting a profound analogy with the well-known long-range velocity correlations in liquids we find, for instance, $P(s)$ to decay algebraically as $s^{-3/2}$. Our study suggests a precise method for obtaining the statistical segment length \bstar in a computer experiment.Open AccessAre polymer melts "ideal"?
It is commonly accepted that in concentrated solutions or melts high-molecular weight polymers display random-walk conformational properties without long-range correlations between subsequent bonds. This absence of memory means, for instance, that the bond-bond correlation function, $P(s)$, of two bonds separated by $s$ monomers along the chain should exponentially decay with $s$. Presenting numerical results and theoretical arguments for both monodisperse chains and self-assembled (essentially Flory size-distributed) equilibrium polymers we demonstrate that some long-range correlations remain due to self-interactions of the chains caused by the chain connectivity and the incompressibility of the melt. Suggesting a profound analogy with the well-known long-range velocity correlations in liquids we find, for instance, $P(s)$ to decay algebraically as $s^{-3/2}$. Our study suggests a precise method for obtaining the statistical segment length \bstar in a computer experiment. - Open Access
Reaction kinetics of coarse-grained equilibrium polymers: a Brownian Dynamics study
Self-assembled linear structures like giant cylindrical micelles or discotic molecules in solution stacked in flexible columns are systems reminiscent of polydisperse polymer solutions.These supramolecular polymers have an equilibrium length distribution, the result of a competition between the random breakage of chains and the fusion of chains to generate longer ones. In the present work, we review the basic theoretical concepts of these ``equilibrium polymers" and some of the important results obtained by simulation approaches. We propose a new version of a mesoscopic model in continuous space based on the bead and FENE spring polymer model which is treated by Brownian Dynamics and Monte-Carlo binding/unbinding reversible changes for adjacent monomers in space, characterized by an attempt frequency parameter. For a dilute and a moderately semi-dilute state-points which both correspond to dynamically unentangled regimes, the dynamic properties are found to depend upon $\omega$ through the effective life time $\tau_b$ of the average size chain which, in turn, yields the kinetic reaction coefficients of the mean-field kinetic model proposed by Cates. Simple kinetic theories seem to work for times $ t \geq \tau_b$ while at shorter time, strong dynamical correlation effects are observed.Open AccessReaction kinetics of coarse-grained equilibrium polymers: a Brownian Dynamics study
Self-assembled linear structures like giant cylindrical micelles or discotic molecules in solution stacked in flexible columns are systems reminiscent of polydisperse polymer solutions.These supramolecular polymers have an equilibrium length distribution, the result of a competition between the random breakage of chains and the fusion of chains to generate longer ones. In the present work, we review the basic theoretical concepts of these ``equilibrium polymers" and some of the important results obtained by simulation approaches. We propose a new version of a mesoscopic model in continuous space based on the bead and FENE spring polymer model which is treated by Brownian Dynamics and Monte-Carlo binding/unbinding reversible changes for adjacent monomers in space, characterized by an attempt frequency parameter. For a dilute and a moderately semi-dilute state-points which both correspond to dynamically unentangled regimes, the dynamic properties are found to depend upon $\omega$ through the effective life time $\tau_b$ of the average size chain which, in turn, yields the kinetic reaction coefficients of the mean-field kinetic model proposed by Cates. Simple kinetic theories seem to work for times $ t \geq \tau_b$ while at shorter time, strong dynamical correlation effects are observed. - 31 December 2005
- Published by Springer Nature
- p. 379-418
Reaction Kinetics of Coarse-Grained Equilibrium Polymers: A Brownian Dynamics Study
- 31 December 2005
- Published by Springer Nature
- p. 379-418
Reaction Kinetics of Coarse-Grained Equilibrium Polymers: A Brownian Dynamics Study
- Open Access
Continuum limit of amorphous elastic bodies (II): Response to a point source
The linear response of two-dimensional amorphous elastic bodies to an external delta force is determined in analogy with recent experiments on granular aggregates. For the generated forces, stress and displacement fields, we find strong relative fluctuations of order one close to the source, which, however, average out readily to the classical predictions of isotropic continuum elasticity. The stress fluctuations decay (essentially) exponentially with distance from the source. Only beyond a surprisingly large distance, $b \approx 30$ interatomic distances, self-averaging dominates, and the quenched disorder becomes irrelevant for the response of an individual configuration. We argue that this self-averaging length $b$ sets also the lower wavelength bound for the applicability of classical eigenfrequency calculations.Particular attention is paid to the displacements of the source, allowing a direct measurement of the local rigidity. The algebraic correlations of these displacements demonstrate the existence of domains of slightly different rigidity without, however, revealing a characteristic length scale, at least not for the system sizes we are able to probe.Open AccessContinuum limit of amorphous elastic bodies (II): Response to a point source
The linear response of two-dimensional amorphous elastic bodies to an external delta force is determined in analogy with recent experiments on granular aggregates. For the generated forces, stress and displacement fields, we find strong relative fluctuations of order one close to the source, which, however, average out readily to the classical predictions of isotropic continuum elasticity. The stress fluctuations decay (essentially) exponentially with distance from the source. Only beyond a surprisingly large distance, $b \approx 30$ interatomic distances, self-averaging dominates, and the quenched disorder becomes irrelevant for the response of an individual configuration. We argue that this self-averaging length $b$ sets also the lower wavelength bound for the applicability of classical eigenfrequency calculations.Particular attention is paid to the displacements of the source, allowing a direct measurement of the local rigidity. The algebraic correlations of these displacements demonstrate the existence of domains of slightly different rigidity without, however, revealing a characteristic length scale, at least not for the system sizes we are able to probe.