Abdolreza Nilchi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Abdolreza Nilchi has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
S. Rasouli Garmarodi
Nuclear Science and Technology Research Institute
7 shared publicationsR. Saberi
6 shared publicationsA. Bagheri
3 shared publicationsA. Khanchi
Jaber Ibn Hayan Research Laboratories, Atomic Energy Organization of Iran, P.O. Box 11365/8486, Tehran, Iran
3 shared publications- Reza Zarghami
School of Chemical Engineering, College of Engineering, University of Tehran, Tehran, Iran
3 shared publications - B. Rouhi Broujeni
Islamic Azad Univ, Tehran Sci & Res Branch, Dept Nat Resources & Environm, POB 1478814656, Tehran, Iran
2 shared publications
Latest Publications
- Open Access
- 1 October 2020
- Published by Elsevier in Desalination and Water Treatment
- Vol. 201, 301-312
Evaluation of [Zn(bim)2(bdc)]n-MOF for adsorption of Cs+ ions from aqueous solution using batch and fixed bed operations
- 1 October 2020
- Published by Elsevier in Desalination and Water Treatment
- Vol. 201, 301-312
Open AccessEvaluation of [Zn(bim)2(bdc)]n-MOF for adsorption of Cs+ ions from aqueous solution using batch and fixed bed operations
- Open Access
- 1 November 2018
- Published by Elsevier in Desalination and Water Treatment
- Vol. 133, 122-133
Preparation and characterization of polyacrylonitrile nanofiber adsorbent modified with 6-amino-1-hexanethiol hydrochloride for the adsorption of thorium (IV) ion from aqueous solution
- 1 November 2018
- Published by Elsevier in Desalination and Water Treatment
- Vol. 133, 122-133
Open AccessPreparation and characterization of polyacrylonitrile nanofiber adsorbent modified with 6-amino-1-hexanethiol hydrochloride for the adsorption of thorium (IV) ion from aqueous solution
- 1 October 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 144 (10)
Preparation and Characterization of Polyacrylonitrile/Aluminum Oxide Nanofiber Adsorbent Modified with 2-Amino-3-Methyl-1-Hexanethiol for the Adsorption of Thorium (IV) Ion from Aqueous Solution
In this study, a novel polyacrylonitrile/aluminum oxide ( ) nanofiber adsorbent modified with 2-amino-3-methyl-1-hexanethiol (AMH) was synthesized by a combination of hydrothermal and electrospinning and evaluated as an adsorbent for removing thorium (IV) ( ) ion from aqueous solution. The was characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and Brunauer–Emmett–Teller (BET) analysis. Response surface methodology (RSM) was used in the optimization of adsorption for parameters such as pH, initial metal ion concentration ( concentration), and contact time. Design-Expert 7 was used for modeling these three variables. Statistical measures validated the developed model ( ). In addition, the adsorption kinetics was well defined by the pseudo-second-order equation ( ) whereas the adsorption isotherms were better fit by the Langmuir model ( ). The adsorption capacity of , composite, led to 98% removal at 25°C. Moreover, thermodynamic parameters were determined which showed the endothermic nature of the reactions. The loaded can be easily regenerated with . Also, the desorption level of by the using was more than 92%.- 1 October 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 144 (10)
Preparation and Characterization of Polyacrylonitrile/Aluminum Oxide Nanofiber Adsorbent Modified with 2-Amino-3-Methyl-1-Hexanethiol for the Adsorption of Thorium (IV) Ion from Aqueous Solution
In this study, a novel polyacrylonitrile/aluminum oxide ( ) nanofiber adsorbent modified with 2-amino-3-methyl-1-hexanethiol (AMH) was synthesized by a combination of hydrothermal and electrospinning and evaluated as an adsorbent for removing thorium (IV) ( ) ion from aqueous solution. The was characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and Brunauer–Emmett–Teller (BET) analysis. Response surface methodology (RSM) was used in the optimization of adsorption for parameters such as pH, initial metal ion concentration ( concentration), and contact time. Design-Expert 7 was used for modeling these three variables. Statistical measures validated the developed model ( ). In addition, the adsorption kinetics was well defined by the pseudo-second-order equation ( ) whereas the adsorption isotherms were better fit by the Langmuir model ( ). The adsorption capacity of , composite, led to 98% removal at 25°C. Moreover, thermodynamic parameters were determined which showed the endothermic nature of the reactions. The loaded can be easily regenerated with . Also, the desorption level of by the using was more than 92%.- 26 September 2012
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 295 (3) , 2111-2115
Solid phase extraction of uranium and thorium on octadecyl bonded silica modified with Cyanex 302 from aqueous solutions
- 26 September 2012
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 295 (3) , 2111-2115
Solid phase extraction of uranium and thorium on octadecyl bonded silica modified with Cyanex 302 from aqueous solutions
- 25 April 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 126 (3) , 1069-1076
Parametric studies on the synthesis of amidoximated adsorbent resins
- 25 April 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 126 (3) , 1069-1076
Parametric studies on the synthesis of amidoximated adsorbent resins
- 1 February 2012
- Published by Elsevier in Applied Radiation and Isotopes
- Vol. 70 (2) , 369-374
Evaluation of PAN-based manganese dioxide composite for the sorptive removal of cesium-137 from aqueous solutions
- 1 February 2012
- Published by Elsevier in Applied Radiation and Isotopes
- Vol. 70 (2) , 369-374
Evaluation of PAN-based manganese dioxide composite for the sorptive removal of cesium-137 from aqueous solutions
- 8 December 2011
- Published by Taylor & Francis in Chemistry and Ecology
- Vol. 28 (2) , 169-185
Adsorption of caesium from aqueous solution using cerium molybdate–pan composite
In this study, a cerium molybdate–polyacrylonitrile (CM–PAN) composite ion exchanger was synthesised and its characteristics were determined by X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), thermogravimetry (TGA), specific area measurement (BET), X-ray fluorescence and CHN elemental analyses. The adsorption of caesium from aqueous solutions by CM–PAN composite was investigated under batch and continuous conditions. The distribution coefficient of caesium on the composite sorbent was studied as a function of pH, solution temperature and the presence of interfering cations, and the optimum conditions for a batch system were determined. Pseudo-first- and second-order sorption kinetic models were used to investigate the kinetics of adsorption and the results pointed to the pseudo-second-order model for caesium sorption kinetics. The intraparticle diffusion model was used to the predict rate-limiting step of the ion exchange process in order to specify the sorption mechanism. Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherm models were fitted to the experimental sorption data, where the Freundlich model showed a good agreement. The adsorption thermodynamic parameters, standard enthalpy, entropy and Gibbs’ free energy were calculated and the reaction was found to be endothermic and spontaneous. Finally, the dynamic sorption capacities of the sorbent at two breakthroughs were calculated from the continuous system.
- 8 December 2011
- Published by Taylor & Francis in Chemistry and Ecology
- Vol. 28 (2) , 169-185
Adsorption of caesium from aqueous solution using cerium molybdate–pan composite
In this study, a cerium molybdate–polyacrylonitrile (CM–PAN) composite ion exchanger was synthesised and its characteristics were determined by X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), thermogravimetry (TGA), specific area measurement (BET), X-ray fluorescence and CHN elemental analyses. The adsorption of caesium from aqueous solutions by CM–PAN composite was investigated under batch and continuous conditions. The distribution coefficient of caesium on the composite sorbent was studied as a function of pH, solution temperature and the presence of interfering cations, and the optimum conditions for a batch system were determined. Pseudo-first- and second-order sorption kinetic models were used to investigate the kinetics of adsorption and the results pointed to the pseudo-second-order model for caesium sorption kinetics. The intraparticle diffusion model was used to the predict rate-limiting step of the ion exchange process in order to specify the sorption mechanism. Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherm models were fitted to the experimental sorption data, where the Freundlich model showed a good agreement. The adsorption thermodynamic parameters, standard enthalpy, entropy and Gibbs’ free energy were calculated and the reaction was found to be endothermic and spontaneous. Finally, the dynamic sorption capacities of the sorbent at two breakthroughs were calculated from the continuous system.
- 5 October 2011
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 292 (2) , 609-617
Evaluation of AMP–PAN composite for adsorption of Cs+ ions from aqueous solution using batch and fixed bed operations
- 5 October 2011
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 292 (2) , 609-617
Evaluation of AMP–PAN composite for adsorption of Cs+ ions from aqueous solution using batch and fixed bed operations
- 29 September 2010
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 119 (6) , 3495-3503
Removal of arsenic from aqueous solutions by an adsorption process with titania–silica binary oxide nanoparticle loaded polyacrylonitrile polymer
In this study, we fabricated a new hybrid adsorbent, titania–silica binary oxide (TiO2–SiO2)–polyacrylonitrile (PAN), by loading nanosized sol–gel‐derived TiO2–SiO2 onto a porous PAN polymer for enhanced arsenite [As(III)] and arsenate [As(V)] species removal from aqueous media. The resulting sorbent was characterized by thermogravimetric analysis, scanning electron microscopy, X‐ray powder diffraction, IR spectroscopy, and porosity measurements. The sorption process for the removal of As(V) and As(III) was assessed with various parameters, including the effects of the pH, contact time, temperature, and existence of foreign competing ions. We found that the adsorption of As(III) and As(V) species onto TiO2–SiO2–PAN was dependent on the pH of solution, and it could be well represented by the Langmuir and Dubinin–Radushkevich isotherm models. The prepared hybrid adsorbent exhibited highly selective arsenic retention from water in the presence of Cl−, NO3−, NO2−, SO42−, and SO32− anions at much greater levels than those toxic metals examined. The values of the standard free energy, enthalpy, and entropy proved that the sorption of As(V) and As(III) species onto the hybrid adsorbent TiO2–SiO2–PAN was an endothermic and spontaneous process. All of the results validated the feasibility of TiO2–SiO2–PAN for the highly effective removal of As(V) and As(III) from contaminated waters. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011
- 29 September 2010
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 119 (6) , 3495-3503
Removal of arsenic from aqueous solutions by an adsorption process with titania–silica binary oxide nanoparticle loaded polyacrylonitrile polymer
In this study, we fabricated a new hybrid adsorbent, titania–silica binary oxide (TiO2–SiO2)–polyacrylonitrile (PAN), by loading nanosized sol–gel‐derived TiO2–SiO2 onto a porous PAN polymer for enhanced arsenite [As(III)] and arsenate [As(V)] species removal from aqueous media. The resulting sorbent was characterized by thermogravimetric analysis, scanning electron microscopy, X‐ray powder diffraction, IR spectroscopy, and porosity measurements. The sorption process for the removal of As(V) and As(III) was assessed with various parameters, including the effects of the pH, contact time, temperature, and existence of foreign competing ions. We found that the adsorption of As(III) and As(V) species onto TiO2–SiO2–PAN was dependent on the pH of solution, and it could be well represented by the Langmuir and Dubinin–Radushkevich isotherm models. The prepared hybrid adsorbent exhibited highly selective arsenic retention from water in the presence of Cl−, NO3−, NO2−, SO42−, and SO32− anions at much greater levels than those toxic metals examined. The values of the standard free energy, enthalpy, and entropy proved that the sorption of As(V) and As(III) species onto the hybrid adsorbent TiO2–SiO2–PAN was an endothermic and spontaneous process. All of the results validated the feasibility of TiO2–SiO2–PAN for the highly effective removal of As(V) and As(III) from contaminated waters. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011