Peter J. Roth
Research Subjects
Peter J. Roth has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Andrew B. Lowe
Nanochemistry Research Institute (NRI)
6 shared publications Janina-Miriam Noy
School of Chemical Engineering, CAMD, UNSW Australia, Sydney, Australia
3 shared publications- Jing Yang Quek
Centre for Advanced Macromolecular Design (CAMD), School of Chemical Engineering, University of New South Wales, Kensington, Sydney, NSW 2052, Australia
2 shared publications Miriam Koldevitz
Centre for Advanced Macromolecular Design (CAMD), School of Chemical Engineering, University of New South Wales, UNSW Sydney, Australia
2 shared publicationsThomas P. Davis
Monash Institute of Pharmaceutical Sciences; Monash University; Parkville VIC 3052 Australia
2 shared publicationsYicheng Zhu
Centre for Advanced Macromolecular Design (CAMD)
2 shared publications
Latest Publications
- 2 January 2015
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 6 (11) , 1928-1931
Thiol-reactive Passerini-methacrylates and polymorphic surface functional soft matter nanoparticles via ethanolic RAFT dispersion polymerization and post-synthesis modification
RAFT dispersion polymerization (RAFTDP) is used to prepare reactive nanoparticles via the incorporation of Passerini-derived methacrylic comonomers containing pentafluorophenyl (PFP) groups. Copolymerization of 2-(dimethylamino)ethyl methacrylate with a Passerini comonomer gives copolymers suitable as macro-CTAs for ethanolic RAFTDP of 3-phenylpropyl methacrylate. Reaction of the PFP residues with functional thiols offers an approach for preparing surface modified nanoparticles.
- 2 January 2015
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 6 (11) , 1928-1931
Thiol-reactive Passerini-methacrylates and polymorphic surface functional soft matter nanoparticles via ethanolic RAFT dispersion polymerization and post-synthesis modification
RAFT dispersion polymerization (RAFTDP) is used to prepare reactive nanoparticles via the incorporation of Passerini-derived methacrylic comonomers containing pentafluorophenyl (PFP) groups. Copolymerization of 2-(dimethylamino)ethyl methacrylate with a Passerini comonomer gives copolymers suitable as macro-CTAs for ethanolic RAFTDP of 3-phenylpropyl methacrylate. Reaction of the PFP residues with functional thiols offers an approach for preparing surface modified nanoparticles.
- 6 October 2014
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 6 (3) , 436-447
Thiol-reactive functional poly(meth)acrylates: multicomponent monomer synthesis, RAFT (co)polymerization and highly efficient thiol–para-fluoro postpolymerization modification
A novel class of thiol-reactive (meth)acrylate monomers and the quantitative postpolymerization modification of their RAFT-made (co)polymers with aromatic, glycosidic, and aliphatic thiols are presented. A set of 6 different N-functional 2-(meth)acryloyloxy-2-(pentafluorophenyl)acetamide monomers bearing pentafluorophenyl groups was prepared by a Passerini three-component reaction of (meth)acrylic acid, 2,3,4,5,6-pentafluorobenzaldehyde, and various isocyanides in water in up to near-quantitative isolated yields. RAFT polymerization was used to produce well-defined homopolymers and copolymers with methyl methacrylate, tert-butyl methacrylate, poly(ethylene glycol) methyl ether (meth)acrylate, and pentafluorophenyl acrylate, with low polydispersity indices of generally ĐM ≤ 1.23. In the presence of base, (co)polymers underwent selective para-fluoro substitution reactions with thiols in the absence of any side reactions observable by 1H and 19F NMR spectroscopy and size exclusion chromatography. The selection of employed thiols included various alkanethiols, a thiolated glucose derivative, mercaptopropionic acid, L-cysteine and the drug captopril. 19F NMR kinetic measurements indicated quantitative thiol–para-fluoro substitutions after primary aliphatic > secondary aliphatic > tertiary aliphatic) and the choice of a suitable base (triethylamine or 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU)). The versatility of thiol-reactive (meth)acrylate species is demonstrated by the examples of a thermoresponsive copolymer showing a thiol-sensitive lower critical solution temperature (LCST) and the selective sequential modification with thiols and amines of a doubly reactive copolymer containing activated pentafluorophenyl esters.
- 6 October 2014
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 6 (3) , 436-447
Thiol-reactive functional poly(meth)acrylates: multicomponent monomer synthesis, RAFT (co)polymerization and highly efficient thiol–para-fluoro postpolymerization modification
A novel class of thiol-reactive (meth)acrylate monomers and the quantitative postpolymerization modification of their RAFT-made (co)polymers with aromatic, glycosidic, and aliphatic thiols are presented. A set of 6 different N-functional 2-(meth)acryloyloxy-2-(pentafluorophenyl)acetamide monomers bearing pentafluorophenyl groups was prepared by a Passerini three-component reaction of (meth)acrylic acid, 2,3,4,5,6-pentafluorobenzaldehyde, and various isocyanides in water in up to near-quantitative isolated yields. RAFT polymerization was used to produce well-defined homopolymers and copolymers with methyl methacrylate, tert-butyl methacrylate, poly(ethylene glycol) methyl ether (meth)acrylate, and pentafluorophenyl acrylate, with low polydispersity indices of generally ĐM ≤ 1.23. In the presence of base, (co)polymers underwent selective para-fluoro substitution reactions with thiols in the absence of any side reactions observable by 1H and 19F NMR spectroscopy and size exclusion chromatography. The selection of employed thiols included various alkanethiols, a thiolated glucose derivative, mercaptopropionic acid, L-cysteine and the drug captopril. 19F NMR kinetic measurements indicated quantitative thiol–para-fluoro substitutions after primary aliphatic > secondary aliphatic > tertiary aliphatic) and the choice of a suitable base (triethylamine or 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU)). The versatility of thiol-reactive (meth)acrylate species is demonstrated by the examples of a thermoresponsive copolymer showing a thiol-sensitive lower critical solution temperature (LCST) and the selective sequential modification with thiols and amines of a doubly reactive copolymer containing activated pentafluorophenyl esters.
- 26 September 2014
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 6 (1) , 44-54
Multicomponent isocyanide-based synthesis of reactive styrenic and (meth)acrylic monomers and their RAFT (co)polymerization
The multicomponent Passerini reaction of aldehydes, carboxylic acids, and isocyanides is used to produce a series of novel reactive (meth)acrylic and styrenic monomers carrying pendant double bond, (trimethylsilyl protected) triple bond, diene, acetate, or pentafluorophenyl functionality. Dichloromethane and water were compared as solvents in the synthesis of 15 different monomers, with water resulting in significantly higher, up to quantitative, isolated yields with minimal purification. Characterization by 1H, 13C, and 19F NMR spectroscopy, FT-IR spectroscopy and mass spectrometry confirmed the synthesis and high purity of the functional α-acyloxycarboxamide products. The monomers are shown to be well suited for the RAFT-synthesis of well-defined homopolymers, statistical copolymers with methyl methacrylate, poly(ethylene glycol) methyl ether methacrylate, and styrene, statistical copolymers produced from two different Passerini-derived monomers, and AB diblock copolymers. SEC-measured polydispersities were generally low, ĐM ≤ 1.29, and 1H NMR spectroscopy confirmed copolymer molar compositions in good agreement with comonomer feed ratios. We expect this synthetic strategy to provide access to a wide range of novel multifunctional materials and demonstrate preliminary postpolymerization modification of a polystyrene derivative by cleavage of its pendent acetate groups and coupling of the dye Methyl Red to the resulting alcohol groups.
- 26 September 2014
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 6 (1) , 44-54
Multicomponent isocyanide-based synthesis of reactive styrenic and (meth)acrylic monomers and their RAFT (co)polymerization
The multicomponent Passerini reaction of aldehydes, carboxylic acids, and isocyanides is used to produce a series of novel reactive (meth)acrylic and styrenic monomers carrying pendant double bond, (trimethylsilyl protected) triple bond, diene, acetate, or pentafluorophenyl functionality. Dichloromethane and water were compared as solvents in the synthesis of 15 different monomers, with water resulting in significantly higher, up to quantitative, isolated yields with minimal purification. Characterization by 1H, 13C, and 19F NMR spectroscopy, FT-IR spectroscopy and mass spectrometry confirmed the synthesis and high purity of the functional α-acyloxycarboxamide products. The monomers are shown to be well suited for the RAFT-synthesis of well-defined homopolymers, statistical copolymers with methyl methacrylate, poly(ethylene glycol) methyl ether methacrylate, and styrene, statistical copolymers produced from two different Passerini-derived monomers, and AB diblock copolymers. SEC-measured polydispersities were generally low, ĐM ≤ 1.29, and 1H NMR spectroscopy confirmed copolymer molar compositions in good agreement with comonomer feed ratios. We expect this synthetic strategy to provide access to a wide range of novel multifunctional materials and demonstrate preliminary postpolymerization modification of a polystyrene derivative by cleavage of its pendent acetate groups and coupling of the dye Methyl Red to the resulting alcohol groups.
- 4 July 2014
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 50 (67) , 9561-9564
Mechano-responsive polymer solutions based on CO 2 supersaturation: shaking-induced phase transitions and self-assembly or dissociation of polymeric nanoparticles
Mechanical stimulation of supersaturated aqueous CO2 solutions is accompanied by a pH increase within seconds. In solutions of tailored homo- and AB diblock copolymers this is exploited to induce micelle formation, or, taking advantage of an aqueous upper critical solution temperature transition, nanoparticle disassembly.
- 4 July 2014
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 50 (67) , 9561-9564
Mechano-responsive polymer solutions based on CO 2 supersaturation: shaking-induced phase transitions and self-assembly or dissociation of polymeric nanoparticles
Mechanical stimulation of supersaturated aqueous CO2 solutions is accompanied by a pH increase within seconds. In solutions of tailored homo- and AB diblock copolymers this is exploited to induce micelle formation, or, taking advantage of an aqueous upper critical solution temperature transition, nanoparticle disassembly.
- 17 June 2014
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 5 (19) , 5689-5699
Macroporous uniform azide- and alkyne-functional polymer microspheres with tuneable surface area: synthesis, in-depth characterization and click-modification
With surface areas of up to 467 m 2 g −1 , crosslinked azide- and alkyne-functional poly(styrene- co -divinylbenzene) microparticles enable versatile modification throughout the particle.
- 17 June 2014
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 5 (19) , 5689-5699
Macroporous uniform azide- and alkyne-functional polymer microspheres with tuneable surface area: synthesis, in-depth characterization and click-modification
With surface areas of up to 467 m 2 g −1 , crosslinked azide- and alkyne-functional poly(styrene- co -divinylbenzene) microparticles enable versatile modification throughout the particle.
- Open Access
- 16 April 2014
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 35 (8) , 848
Macromol. Rapid Commun. 8/2014
- 16 April 2014
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 35 (8) , 848
Open AccessMacromol. Rapid Commun. 8/2014
- 2 April 2014
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 215 (9) , 825-838
Composing Well‐Defined Stimulus‐Responsive Materials Through Postpolymerization Modification Reactions
- 2 April 2014
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 215 (9) , 825-838
Composing Well‐Defined Stimulus‐Responsive Materials Through Postpolymerization Modification Reactions
- 3 February 2014
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 35 (8) , 813-820
Novel α,α-Bischolesteryl Functional (Co)Polymers: RAFT Radical Polymerization Synthesis and Preliminary Solution Characterization
Well-defined poly[pentafluorophenyl (meth)acrylate] (PPFP(M)A) homopolymers are prepared by RAFT radical polymerization mediated by a novel chain transfer agent containing two cholesteryl groups in the R-group fragment. Subsequent reaction with a series of small-molecule amines in the presence of an appropriate Michael acceptor for ω-group end-capping yields a library of novel bischolesteryl functional hydrophilic homopolymers. Two examples of statistical copolymers are also prepared including a biologically relevant sugar derivative. Specific examples of these homopolymers are examined with respect to their ability to self assemble in aqueous media-a process driven entirely by the cholesteryl end groups. In all instances evaluated, and under the preparation conditions examined, the homopolymers aggregate clearly forming polymersomes spanning an impressive size range
- 3 February 2014
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 35 (8) , 813-820
Novel α,α-Bischolesteryl Functional (Co)Polymers: RAFT Radical Polymerization Synthesis and Preliminary Solution Characterization
Well-defined poly[pentafluorophenyl (meth)acrylate] (PPFP(M)A) homopolymers are prepared by RAFT radical polymerization mediated by a novel chain transfer agent containing two cholesteryl groups in the R-group fragment. Subsequent reaction with a series of small-molecule amines in the presence of an appropriate Michael acceptor for ω-group end-capping yields a library of novel bischolesteryl functional hydrophilic homopolymers. Two examples of statistical copolymers are also prepared including a biologically relevant sugar derivative. Specific examples of these homopolymers are examined with respect to their ability to self assemble in aqueous media-a process driven entirely by the cholesteryl end groups. In all instances evaluated, and under the preparation conditions examined, the homopolymers aggregate clearly forming polymersomes spanning an impressive size range
- 5 August 2013
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 46 (16) , 6475-6484
Thermoresponsive (Co)polymers through Postpolymerization Modification of Poly(2-vinyl-4,4-dimethylazlactone)
- 5 August 2013
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 46 (16) , 6475-6484
Thermoresponsive (Co)polymers through Postpolymerization Modification of Poly(2-vinyl-4,4-dimethylazlactone)
- 14 December 2012
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 9 (6) , 1825-1834
Advancing the boundary of insolubility of non-linear PEG-analogues in alcohols: UCST transitions in ethanol–water mixtures
Two series of random copolymers of oligo(ethylene glycol) phenyl ether acrylate (OEGPhA) with either oligo(ethylene glycol) methyl ether acrylate (OEGMeA) or oligo(ethylene glycol) methyl ether methacrylate (OEGMeMA) with varying molar fractions of OEGPhA comonomer, comparable molecular weights (∼14 kg mol−1) and low molecular weight distributions (1.19–1.36) were prepared by the RAFT process. In aqueous solution copolymers exhibited a lower critical solution temperature (LCST) which decreased linearly with an increasing content of phenyl ethers. In a similar trend of decreasing solubility, the upper critical solution temperature (UCST) of the OEGMeA/OEGPhA series in 2-propanol increased linearly from 11.8 °C to 73.6 °C for (co)polymers containing from 0 to 71 mol% of OEGPhA units. Variable temperature NMR measurements in 2-propanol-d8 performed on a diblock copolymer containing a p(OEGMeA-co-OEGPhA) block and a soluble p(dimethyl acrylamide) block revealed the phenyl ethers to remain solvated to a large extent at temperatures 30 °C below the cloud point of the p(OEGMeA-co-OEGPhA) block. The effect of the phenyl groups decreasing solubility in alcohols was attributed to a promotion of favourable polymer–polymer interactions and a decreased contribution to mixing entropy due to rigidity. For high OEGPhA content a phase diagram in ethanol–water mixtures showed cononsolvency in the LCST regime (high water content) followed by a miscibility gap. The UCST regime, showing a solubility maximum at approx. 80 vol% ethanol extended to ethanol concentrations as low as 55 vol%. UCST transitions in intermediate ethanol–water mixtures, unknown for OEGMe(M)A homopolymers, are believed to increase the applicability of non-linear PEG analogues.
- 14 December 2012
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 9 (6) , 1825-1834
Advancing the boundary of insolubility of non-linear PEG-analogues in alcohols: UCST transitions in ethanol–water mixtures
Two series of random copolymers of oligo(ethylene glycol) phenyl ether acrylate (OEGPhA) with either oligo(ethylene glycol) methyl ether acrylate (OEGMeA) or oligo(ethylene glycol) methyl ether methacrylate (OEGMeMA) with varying molar fractions of OEGPhA comonomer, comparable molecular weights (∼14 kg mol−1) and low molecular weight distributions (1.19–1.36) were prepared by the RAFT process. In aqueous solution copolymers exhibited a lower critical solution temperature (LCST) which decreased linearly with an increasing content of phenyl ethers. In a similar trend of decreasing solubility, the upper critical solution temperature (UCST) of the OEGMeA/OEGPhA series in 2-propanol increased linearly from 11.8 °C to 73.6 °C for (co)polymers containing from 0 to 71 mol% of OEGPhA units. Variable temperature NMR measurements in 2-propanol-d8 performed on a diblock copolymer containing a p(OEGMeA-co-OEGPhA) block and a soluble p(dimethyl acrylamide) block revealed the phenyl ethers to remain solvated to a large extent at temperatures 30 °C below the cloud point of the p(OEGMeA-co-OEGPhA) block. The effect of the phenyl groups decreasing solubility in alcohols was attributed to a promotion of favourable polymer–polymer interactions and a decreased contribution to mixing entropy due to rigidity. For high OEGPhA content a phase diagram in ethanol–water mixtures showed cononsolvency in the LCST regime (high water content) followed by a miscibility gap. The UCST regime, showing a solubility maximum at approx. 80 vol% ethanol extended to ethanol concentrations as low as 55 vol%. UCST transitions in intermediate ethanol–water mixtures, unknown for OEGMe(M)A homopolymers, are believed to increase the applicability of non-linear PEG analogues.