ÜÖÜmit Özgür

Ümit Özgür

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ümit Özgür has a total of 94 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Size-Tunable Band Structure and Optical Properties of Colloidal Silicon Nanocrystals Synthesized via Thermal Disproportionation of Hydrogen Silsesquioxane Polymers

    by David S. Pate, Griffin C. Spence, Lisa S. Graves, Indika U. Arachchige, Ümit Özgür

    Dodecane-capped silicon nanocrystals (NCs) were synthesized by using a low-temperature (800-1100 °C) polymer variant of traditional hydrogen silsesquioxane thermal disproportionation. Highly crystalline Si NCs having tunable diameters (3.0-6.7 nm) and thus photoluminescence (PL) peaks (1.68-1.29 eV) were attained via changes in the maximum annealing temperature. Modifications in the NC band structure with diameter were explored by comparison of emission with absorption spectra obtained from diffuse reflectance spectroscopy. Large apparent energy shifts between onsets and PL were noted, being significant for smaller NCs (≤∼4.0 nm). This, along with comparatively "softer" onsets, is commensurate with density of states elongation around PL peaks associated with increasing confinement predicted for indirect semiconductor nanostructures. Tauc analyses of absorption additionally revealed three distinguishable optical transitions in all NCs: attributed to indirect Γ25'-Δ1 in lower energy ranges (likely the emission progenitor), indirect Γ25'-L1 overtaken by quasi-direct Γ-X wave function mixing for NC diameters ≤∼4.0 nm within the midenergy regime, and direct Γ25'-Γ15 transitions at energies nearing and above ∼3 eV.


  • Open Access

    Hot-Electron Microwave Noise and Energy Relaxation in (Be)MgZnO/ZnO Heterostructures

    by Emilis Šermukšnis, Artūr Šimukovič, Vitaliy Avrutin, Natalia Izyumskaya, Ümit Özgür, Hadis Morkoç

    Pulsed hot-electron microwave noise measurements of the (Be)MgZnO/ZnO heterostructures are presented in this work. The heterostructures of different barrier thicknesses and different bulk electron densities in ZnO layer are compared. Capacitance–voltage (C–V) measurements reveal the decrease in the two-dimensional electron gas (2DEG) peak in electron density profile at the Zn-polar BeMgZnO/ZnO interface as the BeMgZnO barrier layer thickness decreases. For thin-barrier heterostructures, the peak disappears and only the bulk electron density is resolved in C–V measurements. The excess noise temperature at ∼10 GHz in thick-barrier heterostructures is noticeably higher (∼10 times) compared to thin-barrier heterostructures, which is attributed to the strong noise source in the contacts of the former. In the case of thin-barrier heterostructures, at electric fields above ∼10 kV/cm and electron density ≳1×1017cm−3, strong noise source is resolved, which was also observed earlier in the Ga-doped ZnO films due to the formation of self-supporting high-field domains. However, for the low electron densities (≲6 ×1016 cm−3), the aforementioned noise source is not observed, which suggests the importance of a deep ZnO/GaN interface with 2DEG for power dissipation. The hot-electron temperature dependence on the dissipated power of those low-electron-density heterostructures is similar to that of O-polar ZnO/MgZnO. The estimated electron energy relaxation time in ZnO/MgZnO is ∼0.45 ps ± 0.05 ps at dissipated electrical power per electron of ∼0.1 nW/el and approaches ∼0.1 ps as the dissipated power is increased above ∼10 nW/el.


  • Tunable Optical Properties and Recombination Dynamics of Ge1-x-ySiySnx Nanoalloys

    by David S. Pate, Chineme Jeanfrances Onukwughara, Griffin C. Spence, Indika U. Arachchige, Ümit Özgür

    We report on quantum confined Ge1-x-ySiySnx nanocrystals demonstrating both size- and composition-tunable direct visible/NIR emission (1.77 – 2.47 eV) and recombination dynamics. Temperature-dependent time-resolved photoluminescence suggests significant enhancement of oscillator strengths with Si incorporation.


  • Open Access

    MOCVD-grown β-Ga2O3 as a Gate Dielectric on AlGaN/GaN-Based Heterojunction Field Effect Transistor

    by Samiul Hasan, Mohi Uddin Jewel, Scott R. Crittenden, Dongkyu Lee, Vitaliy Avrutin, Ümit Özgür, Hadis Morkoç, Iftikhar Ahmad

    We report the electrical properties of Al0.3Ga0.7N/GaN heterojunction field effect transistor (HFET) structures with a Ga2O3 passivation layer grown by metal–organic chemical vapor deposition (MOCVD). In this study, three different thicknesses of β-Ga2O3 dielectric layers were grown on Al0.3Ga0.7N/GaN structures leading to metal-oxide-semiconductor-HFET or MOSHFET structures. X-ray diffraction (XRD) showed the (2¯01) orientation peaks of β-Ga2O3 in the device structure. The van der Pauw and Hall measurements yield the electron density of ~ 4 × 1018 cm−3 and mobility of ~770 cm2V−1s−1 in the 2-dimensional electron gas (2DEG) channel at room temperature. Capacitance–voltage (C-V) measurement for the on-state 2DEG density for the MOSHFET structure was found to be of the order of ~1.5 × 1013 cm−2. The thickness of the Ga2O3 layer was inversely related to the threshold voltage and the on-state capacitance. The interface charge density between the oxide and Al0.3Ga0.7N barrier layer was found to be of the order of ~1012 cm2eV−1. A significant reduction in leakage current from ~10−4 A/cm2 for HFET to ~10−6 A/cm2 for MOSHFET was observed well beyond pinch-off in the off-stage at -20 V applied gate voltage. The annealing at 900° C of the MOSHFET structures revealed that the Ga2O3 layer was thermally stable at high temperatures resulting in insignificant threshold voltage shifts for annealed samples with respect to as-deposited (unannealed) structures. Our results show that the MOCVD-gown Ga2O3 dielectric layers can be a strong candidate for stable high-power devices.


  • Open Access

    MOCVD-Grown Ga2O3 as a Gate Dielectric on Algan/Gan Based Heterojunction Field Effect Transistor

    by Samiul Hasan, Mohi Uddin Jewel, Scott R Crittenden, Dongkyu Lee, Vitaliy Avrutin, Umit Ozgur, Hadis Morkoc, Iftikhar Ahmad

    We report the electrical properties of Al0.3Ga0.7N/GaN heterojunction field effect transistor (HFET) structures with a Ga2O3 passivation layer grown by metal-organic chemical vapor deposition (MOCVD). In this study, three different thicknesses of Ga2O3 dielectric layers were grown on Al0.3Ga0.7N/GaN structures leading to metal-oxide-semiconductor-HFET or MOSHFET structures. X-ray diffraction (XRD) showed the (¯201) orientation peaks of -Ga2O3 in the device structure. The van der Pauw and Hall measurements yield the electron density of ~ 4 x1018 cm-3 and mobility of ~770 cm2V-1s-1 in the 2-dimensional electron gas (2DEG) channel at room temperature. Capacitance-voltage (C-V) measurement for the on-state 2DEG density for the MOSHFET structure was found to be of the order of ~1.5 x1013 cm-2. The thickness of the Ga2O3 layer was inversely related to the threshold voltage and the on-state capacitance. The interface charge density between the oxide and Al0.3Ga0.7N barrier layer was found to be of the order of ~1012 cm2eV-1. The annealing at 900° C of the MOSHFET structures revealed that the Ga2O3 layer was thermally stable at high temperatures resulting in insignificant threshold voltage shifts for annealed samples with respect to as-deposited (unannealed) structures. Our results show that the MOCVD-gown Ga2O3 dielectric layers can be a strong candidate for stable high-power devices.


  • Open Access

    Energy-Efficient, On-Demand Activation of Biosensor Arrays for Long-Term Continuous Health Monitoring

    by Jonathan Lundquist, Benjamin Horstmann, Dmitry Pestov, Umit Ozgur, Vitaliy Avrutin, Erdem Topsakal

    Wearable biosensors for continuous health monitoring, particularly those used for glucose detection, have a limited operational lifetime due to biodegradation and fouling. As a result, patients must change sensors frequently, increasing cost and patient discomfort. Arrays of multiple sensors, where the individual devices can be activated on demand, increase overall operational longevity, thereby reducing cost and improving patient outcomes. This work demonstrates the feasibility of this approach via decomposition of combustible nitrocellulose membranes that protect the individual sensors from exposure to bioanalytes using a current pulse. Metal contacts, connected by graphene-loaded PEDOT:PSS polymer on the surface of the membrane, deliver the required energy to decompose the membrane. Nitrocellulose membranes with a thickness of less than 1 µm consistently transfer on to polydimethylsiloxane (PDMS) wells. An electrical energy as low as 68 mJ has been shown to suffice for membrane decomposition.


  • Top Cited Papers
    Open Access

    Micro-LEDs, a Manufacturability Perspective

    by Kai Ding, Vitaliy Avrutin, Natalia Izyumskaya, Ümit Özgür, Hadis Morkoç

    Compared with conventional display technologies, liquid crystal display (LCD), and organic light emitting diode (OLED), micro-LED displays possess potential advantages such as high contrast, fast response, and relatively wide color gamut, low power consumption, and long lifetime. Therefore, micro-LED displays are deemed as a promising technology that could replace LCD and OLED at least in some applications. While the prospects are bright, there are still some technological challenges that have not yet been fully resolved in order to realize the high volume commercialization, which include efficient and reliable assembly of individual LED dies into addressable arrays, full-color schemes, defect and yield management, repair technology and cost control. In this article, we review the recent technological developments of micro-LEDs from various aspects.


  • Open Access

    Status of Growth of Group III-Nitride Heterostructures for Deep Ultraviolet Light-Emitting Diodes

    by Kai Ding, Vitaliy Avrutin, Ümit Özgür, Hadis Morkoç

    We overview recent progress in growth aspects of group III-nitride heterostructures for deep ultraviolet (DUV) light-emitting diodes (LEDs), with particular emphasis on the growth approaches for attaining high-quality AlN and high Al-molar fraction AlGaN. The discussion commences with the introduction of the current status of group III-nitride DUV LEDs and the remaining challenges. This segues into discussion of LED designs enabling high device performance followed by the review of advances in the methods for the growth of bulk single crystal AlN intended as a native substrate together with a discussion of its UV transparency. It should be stated, however, that due to the high-cost of bulk AlN substrates at the time of writing, the growth of DUV LEDs on foreign substrates such as sapphire still dominates the field. On the deposition front, the heteroepitaxial growth approaches incorporate high-temperature metal organic chemical vapor deposition (MOCVD) and pulsed-flow growth, a variant of MOCVD, with the overarching goal of enhancing adatom surface mobility, and thus epitaxial lateral overgrowth which culminates in minimization the effect of lattice- and thermal-mismatches. This is followed by addressing the benefits of pseudomorphic growth of strained high Al-molar fraction AlGaN on AlN. Finally, methods utilized to enhance both p- and n-type conductivity of high Al-molar fraction AlGaN are reviewed.


  • Energy Gap Tuning and Carrier Dynamics in Colloidal Ge1–xSnx Quantum Dots

    by Shopan A. Hafiz, Richard J Alan Esteves, Denis O. Demchenko, Indika U. Arachchige, Ümit Özgür

    Optical transition energies and carrier dynamics in colloidally synthesized 2.0 ± 0.8 nm Ge1–xSnx quantum dots (x = 0.055–0.236) having visible luminescence were investigated using steady-state and time-resolved photoluminescence (PL) spectroscopy supported by first-principles calculations. By changing Sn content from x = 0.055 to 0.236, experimentally determined HOMO–LUMO gap at 15 K was tuned from 1.88 to 1.61 eV. Considering the size and compositional variations, these values were consistent with theoretically calculated ones. At 15 K, time-resolved PL revealed slow decay of luminescence (3–27 μs), likely due to the recombination of spin-forbidden dark excitons and recombination of carriers trapped at surface states. Increasing Sn concentration to 23.6% led to 1 order of magnitude faster recombination. At 295 K, PL decays were 3 orders of magnitude faster (9–28 ns) owing to the thermal activation of bright excitons and carrier detrapping from surface states.


  • Measurements of generation‐recombination effect by low‐frequency phase‐noise technique in AlGaN/GaN MOSHFETs

    by Cemil Kayis, Jacob H. Leach, C.Y. Zhu, Mo Wu, X. Li, Ümit Özgür, Hadis Morkoç, X. Yang, Veena Misra, Peter H. Handel