Mariano Troccoli
Research Subjects
Mariano Troccoli has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Xiaojun Wang
2 shared publicationsAiting Jiang
Department of Electrical and Computer Engineering, The University of Texas, Austin, TX, USA
1 shared publicationAlexei G. Tsekoun
1 shared publicationArkadiy Lyakh
1 shared publicationC. Kumar N. Patel
1 shared publicationClaire F. Gmachl
Princeton Univ. (United States)
1 shared publication
Latest Publications
- 24 March 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 21 (6) , 61-67
High-Power Emission and Single-Mode Operation of Quantum Cascade Lasers for Industrial Applications
In this paper, we review and expand on our results dealing with high-power quantum cascade (QC) lasers and single-mode devices in the mid- and long-wave infrared (IR) regions of the spectrum (4-12 μm). The specifications and characteristics of state-of-the-art QC lasers fabricated by the metal-organic chemical vapor deposition technology are illustrated, along with their key application requirements and potential issues for future improvements. Single emitter QC lasers in the Watt-class range and narrow-linewidth low power DFBs spanning the whole mid-IR region are presented and analyzed.
- 24 March 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 21 (6) , 61-67
High-Power Emission and Single-Mode Operation of Quantum Cascade Lasers for Industrial Applications
In this paper, we review and expand on our results dealing with high-power quantum cascade (QC) lasers and single-mode devices in the mid- and long-wave infrared (IR) regions of the spectrum (4-12 μm). The specifications and characteristics of state-of-the-art QC lasers fabricated by the metal-organic chemical vapor deposition technology are illustrated, along with their key application requirements and potential issues for future improvements. Single emitter QC lasers in the Watt-class range and narrow-linewidth low power DFBs spanning the whole mid-IR region are presented and analyzed.
- 17 December 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 26 (4) , 391-394
THz Difference-Frequency Generation in MOVPE-Grown Quantum Cascade Lasers
We report mass-producible room-temperature electrically-pumped THz sources based on intra-cavity difference-frequency generation in mid-infrared InGaAs/AlInAs/InP quantum cascade lasers. Devices are grown by a commercial foundry using metal organic vapor phase epitaxy. A dual-stack active region possessing giant optical nonlinearity for 3.5 THz generation and a non-collinear Cherenkov waveguide THz outcoupling scheme is employed. Fabry-Pérot devices provided broad emission in the 3-4 THz range with a peak power of 5 μW. Single color THz sources were processed using surface distributed feedback gratings to produce narrowband emission at 3.5 THz with nearly 40 μW of peak power and a mid-infrared-to-THz conversion efficiency of 0.36 mW/W2. To better understand the dynamics of the DFG process, time gated spectral measurements of the mid-infrared pumps were performed and simultaneous lasing over the duration of the applied bias pulse was observed, thereby resulting in efficient difference frequency generation.
- 17 December 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 26 (4) , 391-394
THz Difference-Frequency Generation in MOVPE-Grown Quantum Cascade Lasers
We report mass-producible room-temperature electrically-pumped THz sources based on intra-cavity difference-frequency generation in mid-infrared InGaAs/AlInAs/InP quantum cascade lasers. Devices are grown by a commercial foundry using metal organic vapor phase epitaxy. A dual-stack active region possessing giant optical nonlinearity for 3.5 THz generation and a non-collinear Cherenkov waveguide THz outcoupling scheme is employed. Fabry-Pérot devices provided broad emission in the 3-4 THz range with a peak power of 5 μW. Single color THz sources were processed using surface distributed feedback gratings to produce narrowband emission at 3.5 THz with nearly 40 μW of peak power and a mid-infrared-to-THz conversion efficiency of 0.36 mW/W2. To better understand the dynamics of the DFG process, time gated spectral measurements of the mid-infrared pumps were performed and simultaneous lasing over the duration of the applied bias pulse was observed, thereby resulting in efficient difference frequency generation.
- 29 August 2013
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 3 (9) , 1546-1560
Long-Wave IR Quantum Cascade Lasers for emission in the λ = 8-12μm spectral region
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
- 29 August 2013
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 3 (9) , 1546-1560
Long-Wave IR Quantum Cascade Lasers for emission in the λ = 8-12μm spectral region
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
- 4 March 2013
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8640, 86401V
Transverse mode control in quantum cascade lasers via lossy lateral constrictions
Quantum Cascade (QC) lasers are semiconductor devices operating in the mid-infrared and terahertz regions of the electromagnetic spectrum. Since their first demonstration in 1994, they have evolved rapidly into high power devices. However, they also have intrinsic challenges, such as beam steering at high power. Such phenomenon has been observed in QC lasers and attributed to the interaction between the two lowest transverse modes in the laser cavity. In this project, we have used COMSOL Multiphysics simulations to first investigate how transverse mode propagation can be controlled with cavity spoilers. We have modeled this effect by creating short and lossy lateral constrictions from the top of the laser ridge to perturb the modes distributed more toward the sides of the laser ridge, while leaving the fundamental mode intact. After obtaining optimized dimensions for the constrictions, we have utilized focused ion beam (FIB) milling to etch two small trenches from the top of several laser ridges to create the simulated effect on our devices. We, then, filled them with platinum in an effort to completely suppress the propagation of higher order transverse modes in the cavity. The results obtained show minimal effect on threshold and a Gaussian far-field distribution at various current levels, indicating a complete suppression of the higher order transverse modes.
- 4 March 2013
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8640, 86401V
Transverse mode control in quantum cascade lasers via lossy lateral constrictions
Quantum Cascade (QC) lasers are semiconductor devices operating in the mid-infrared and terahertz regions of the electromagnetic spectrum. Since their first demonstration in 1994, they have evolved rapidly into high power devices. However, they also have intrinsic challenges, such as beam steering at high power. Such phenomenon has been observed in QC lasers and attributed to the interaction between the two lowest transverse modes in the laser cavity. In this project, we have used COMSOL Multiphysics simulations to first investigate how transverse mode propagation can be controlled with cavity spoilers. We have modeled this effect by creating short and lossy lateral constrictions from the top of the laser ridge to perturb the modes distributed more toward the sides of the laser ridge, while leaving the fundamental mode intact. After obtaining optimized dimensions for the constrictions, we have utilized focused ion beam (FIB) milling to etch two small trenches from the top of several laser ridges to create the simulated effect on our devices. We, then, filled them with platinum in an effort to completely suppress the propagation of higher order transverse modes in the cavity. The results obtained show minimal effect on threshold and a Gaussian far-field distribution at various current levels, indicating a complete suppression of the higher order transverse modes.