Dengming Xiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dengming Xiao has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Juntao Jiao
2 shared publicationsSu Zhao
Shanghai Jiao Tong University - Xuhui Campus, Department of Electrical Engineering, High Voltage Building No.1954 Huashan Rd. Xuhui District, Shanghai, 200030, CHINA
2 shared publicationsXiaoling Zhao
2 shared publicationsYunkun Deng
Postdoctoral Workstn Yunnan Power Grid Corp, Kunming 650217, Yunnan, Peoples R China
2 shared publicationsB.-T. Wu
Department of Electrical Engineering, Shanghai Jiaotong University, Shanghai, 200030, P.R. China
1 shared publicationBaijie Zhou
Department of Intelligent Electrical Equipment, Nari Group Corporation, No. 19 Chengxin Avenue, Jiangning District, Nanjing, 210093, CHINA
1 shared publication
Latest Publications
- Open Access
- 22 July 2020
- Published by IntechOpen
Research Progress on Synergistic Effect between Insulation Gas Mixtures
Synergetic effect is a special gas discharge phenomenon among insulating gas mixtures, which has important reference value for gas selection of future gas-insulated power equipment. The research progress and investigation methods of synergistic effect and insulation characteristics of different gas mixtures at home and abroad are reviewed in this chapter. The synergistic effect between different kinds of gas mixtures including SF6 gas mixtures and some new insulation gases such as c-C4F8, CF3I, and C4F7N is presented. Combined with the results of multiple studies, it can be seen that the synergistic effect of the gas mixture has a certain relationship with the electronic transport parameters and discharge patterns. Besides, the synergistic effect of the same gas mixture may change with the change of external conditions such as gas pressure, voltage type, and electrode distance.
- 22 July 2020
- Published by IntechOpen
Open AccessResearch Progress on Synergistic Effect between Insulation Gas Mixtures
Synergetic effect is a special gas discharge phenomenon among insulating gas mixtures, which has important reference value for gas selection of future gas-insulated power equipment. The research progress and investigation methods of synergistic effect and insulation characteristics of different gas mixtures at home and abroad are reviewed in this chapter. The synergistic effect between different kinds of gas mixtures including SF6 gas mixtures and some new insulation gases such as c-C4F8, CF3I, and C4F7N is presented. Combined with the results of multiple studies, it can be seen that the synergistic effect of the gas mixture has a certain relationship with the electronic transport parameters and discharge patterns. Besides, the synergistic effect of the same gas mixture may change with the change of external conditions such as gas pressure, voltage type, and electrode distance.
- Open Access
- 19 December 2018
- Published by IntechOpen
The Performance of Insulation and Arc Interruption of the Environmentally Friendly Gas CF3I
Many researches of trifluoroiodomethane (CF3I) have shown that CF3I has many excellent properties that make it one of the possible alternatives of SF6. This paper reveals the effect laws of CF3I gas content, gap distance, gas pressure, polarity, and electric field nonuniform coefficient on the insulation performance of CF3I gas mixtures. In general, CF3I-N2 gas mixtures present a superior dielectric strength than CF3I-CO2 under different electric field sets. The experimental results indicate that 20 and 30% content CF3I-N2 gas mixtures can achieve nearly 50 and 55% insulation strength of pure SF6. In addition, to evaluate the arc interruption performance of environmentally friendly gas CF3I, we set up a CF3I transient nozzle arc model to study its thermodynamic and transport property. The analysis shows that CF3I gas has a good arc interruption capability, which mainly functions thermodynamic and transport properties approach that of SF6, and some are even better than SF6. The decomposition process is also aggravated by impurities including metal and water. The main by-products are greenhouse gases with GWP below that of SF6 and are lowly toxic and incombustible.
- 19 December 2018
- Published by IntechOpen
Open AccessThe Performance of Insulation and Arc Interruption of the Environmentally Friendly Gas CF3I
Many researches of trifluoroiodomethane (CF3I) have shown that CF3I has many excellent properties that make it one of the possible alternatives of SF6. This paper reveals the effect laws of CF3I gas content, gap distance, gas pressure, polarity, and electric field nonuniform coefficient on the insulation performance of CF3I gas mixtures. In general, CF3I-N2 gas mixtures present a superior dielectric strength than CF3I-CO2 under different electric field sets. The experimental results indicate that 20 and 30% content CF3I-N2 gas mixtures can achieve nearly 50 and 55% insulation strength of pure SF6. In addition, to evaluate the arc interruption performance of environmentally friendly gas CF3I, we set up a CF3I transient nozzle arc model to study its thermodynamic and transport property. The analysis shows that CF3I gas has a good arc interruption capability, which mainly functions thermodynamic and transport properties approach that of SF6, and some are even better than SF6. The decomposition process is also aggravated by impurities including metal and water. The main by-products are greenhouse gases with GWP below that of SF6 and are lowly toxic and incombustible.
- Open Access
- 17 October 2018
- Published by IntechOpen
Development Prospect of Gas Insulation Based on Environmental Protection
The research situation of environmentally friendly gas insulation is expounded in this paper. The basic physical and chemical properties of the insulating gases are analysed, to propose several environment-friendly insulating gas of potential alternative to sulphur hexafluoride (SF6). The insulation characteristics of different components gas mixtures with 90% of nitrogen (N2) and carbon dioxide (CO2) as buffer gas and 10% octafluorocyclobutane (c-C4F8), Trifluoroiodomethane (CF3I) and heptafluorobutyronitrile (C4F7N) as the main insulating gas had been tested with 5–20 mm sphere-plane electrode gaps in non-uniform electric field under the power frequency voltage and positive and negative lightning impulse breakdown. The development prospects of environmentally friendly gas insulation are forecasted. Further analysis of c-C4F8,CF3I and C4F7N (some friendly gases, which have the potential to replace SF6) are conducted trying to points out the further research direction.
- 17 October 2018
- Published by IntechOpen
Open AccessDevelopment Prospect of Gas Insulation Based on Environmental Protection
The research situation of environmentally friendly gas insulation is expounded in this paper. The basic physical and chemical properties of the insulating gases are analysed, to propose several environment-friendly insulating gas of potential alternative to sulphur hexafluoride (SF6). The insulation characteristics of different components gas mixtures with 90% of nitrogen (N2) and carbon dioxide (CO2) as buffer gas and 10% octafluorocyclobutane (c-C4F8), Trifluoroiodomethane (CF3I) and heptafluorobutyronitrile (C4F7N) as the main insulating gas had been tested with 5–20 mm sphere-plane electrode gaps in non-uniform electric field under the power frequency voltage and positive and negative lightning impulse breakdown. The development prospects of environmentally friendly gas insulation are forecasted. Further analysis of c-C4F8,CF3I and C4F7N (some friendly gases, which have the potential to replace SF6) are conducted trying to points out the further research direction.
- 3 September 2018
- Published by IOP Publishing in Plasma Science and Technology
- Vol. 21 (1) , 015401
Breakdown characteristics of CF3I/N2/CO2 mixture in power frequency and lightning impulse voltages
Trifluoroiodomethane (CF3I) and its mixtures are believed to be prospective alternatives for sulfur hexafluoride (SF6) which has been included as greenhouse gas. In this paper, breakdown properties of CF3I/N2/CO2 mixture with the volume fraction of CF3I fixed on 10% are investigated under power frequency and lightning impulse voltages. The experimental result shows that N2 possesses higher power frequency and negative lightning impulse breakdown voltages than CO2, but the power frequency and negative lightning impulse breakdown voltages of CF3I/N2/CO2 mixture does not increase with the content of N2. For the purpose of explaining the abnormal phenomenon, ionization energies and excitation energies of CF3I, N2 and CO2 are calculated. The computation results indicate that ionization energy of CF3I is lower than the excitation energies of N2 but higher than the lowest excitation energy of CO2, which means CF3I molecules are easy to be ionized by metastable N2 molecules. The first excitation energy of N2 is too high, which hinders its application to be the buffer gas of CF3I.
- 3 September 2018
- Published by IOP Publishing in Plasma Science and Technology
- Vol. 21 (1) , 015401
Breakdown characteristics of CF3I/N2/CO2 mixture in power frequency and lightning impulse voltages
Trifluoroiodomethane (CF3I) and its mixtures are believed to be prospective alternatives for sulfur hexafluoride (SF6) which has been included as greenhouse gas. In this paper, breakdown properties of CF3I/N2/CO2 mixture with the volume fraction of CF3I fixed on 10% are investigated under power frequency and lightning impulse voltages. The experimental result shows that N2 possesses higher power frequency and negative lightning impulse breakdown voltages than CO2, but the power frequency and negative lightning impulse breakdown voltages of CF3I/N2/CO2 mixture does not increase with the content of N2. For the purpose of explaining the abnormal phenomenon, ionization energies and excitation energies of CF3I, N2 and CO2 are calculated. The computation results indicate that ionization energy of CF3I is lower than the excitation energies of N2 but higher than the lowest excitation energy of CO2, which means CF3I molecules are easy to be ionized by metastable N2 molecules. The first excitation energy of N2 is too high, which hinders its application to be the buffer gas of CF3I.
- 6 July 2018
- Published by IOP Publishing in Plasma Science and Technology
- Vol. 20 (8) , 085404
Characteristic analysis of CO2 switching arcs under a DC current
- 6 July 2018
- Published by IOP Publishing in Plasma Science and Technology
- Vol. 20 (8) , 085404
Characteristic analysis of CO2 switching arcs under a DC current
- 22 June 2018
- Published by IOP Publishing in Plasma Science and Technology
- Vol. 20 (10) , 105405
Insulation characteristics of triple mixtures of c-C4F8/N2/CO2 under lightning impulse voltage
This paper has researched the insulation characteristics of 10% c-C4F8/N2/CO2 mixtures under lightning impulse voltage by experiment. It is shown that the positive and negative lightning impulse breakdown voltages of 10%c-C4F8/N2/CO2 gas mixtures rise linearly as the electrode gap distance and gas pressure increase and under the same conditions, the positive lightning impulse breakdown voltage of the gas mixtures is always higher than the negative lightning impulse breakdown voltage. As the gas mixtures have a little higher liquefied temperature than SF6 and the comprehensive GWP is about 5% of SF6, and the positive and negative lightning impulse breakdown voltages can both reach 60% of SF6, 10%c-C4F8/N2/CO2 gas mixtures can be applied as insulation gas in electrical equipment such as C-GIS, GIT, GIL and so on.
- 22 June 2018
- Published by IOP Publishing in Plasma Science and Technology
- Vol. 20 (10) , 105405
Insulation characteristics of triple mixtures of c-C4F8/N2/CO2 under lightning impulse voltage
This paper has researched the insulation characteristics of 10% c-C4F8/N2/CO2 mixtures under lightning impulse voltage by experiment. It is shown that the positive and negative lightning impulse breakdown voltages of 10%c-C4F8/N2/CO2 gas mixtures rise linearly as the electrode gap distance and gas pressure increase and under the same conditions, the positive lightning impulse breakdown voltage of the gas mixtures is always higher than the negative lightning impulse breakdown voltage. As the gas mixtures have a little higher liquefied temperature than SF6 and the comprehensive GWP is about 5% of SF6, and the positive and negative lightning impulse breakdown voltages can both reach 60% of SF6, 10%c-C4F8/N2/CO2 gas mixtures can be applied as insulation gas in electrical equipment such as C-GIS, GIT, GIL and so on.
- 30 April 2018
- Published by IOP Publishing in Plasma Science and Technology
- Vol. 20 (6) , 065401
Calculation and characteristic analysis on synergistic effect of CF3I gas mixtures
- 30 April 2018
- Published by IOP Publishing in Plasma Science and Technology
- Vol. 20 (6) , 065401
Calculation and characteristic analysis on synergistic effect of CF3I gas mixtures
- 28 October 2016
- Published by IOP Publishing in Plasma Science and Technology
- Vol. 18 (11) , 1095-1100
Breakdown Electric Field of Hot 30% CF3I/CO2Mixtures at Temperature of 300–3500 K During Arc Extinction Process
We calculated the uniform dielectric breakdown field strength of residual 30% CF3I/CO2 gas mixtures during the arc extinction process over the temperature range 300–3500 K at 0.1 MPa. The limiting reduced field strengths are decided by a balance of electron generation and loss based on chemical reactions estimated by the electron energy distribution function (EEDF), which employs the Boltzmann equation method with two-term expanding approximation in the steady-state Townsend (SST) condition. During the insulation recovery phase, the hot CF3I/CO2 gas mixtures have maximum dielectric strength at a temperature of about 1500 K. At room temperature 300 K, the electric strength after arc extinction (90.3 Td, 1 Td=10−21 Vm2) is only 38% of the original value before arc (234.9 Td). The adverse insulation recovery ability of CF3I/CO2 gas mixtures in arc extinction hinders its application in electric circuit breakers and other switchgears as an arc quenching and insulating medium.
- 28 October 2016
- Published by IOP Publishing in Plasma Science and Technology
- Vol. 18 (11) , 1095-1100
Breakdown Electric Field of Hot 30% CF3I/CO2Mixtures at Temperature of 300–3500 K During Arc Extinction Process
We calculated the uniform dielectric breakdown field strength of residual 30% CF3I/CO2 gas mixtures during the arc extinction process over the temperature range 300–3500 K at 0.1 MPa. The limiting reduced field strengths are decided by a balance of electron generation and loss based on chemical reactions estimated by the electron energy distribution function (EEDF), which employs the Boltzmann equation method with two-term expanding approximation in the steady-state Townsend (SST) condition. During the insulation recovery phase, the hot CF3I/CO2 gas mixtures have maximum dielectric strength at a temperature of about 1500 K. At room temperature 300 K, the electric strength after arc extinction (90.3 Td, 1 Td=10−21 Vm2) is only 38% of the original value before arc (234.9 Td). The adverse insulation recovery ability of CF3I/CO2 gas mixtures in arc extinction hinders its application in electric circuit breakers and other switchgears as an arc quenching and insulating medium.
- 1 March 2016
- Published by IOP Publishing in Plasma Science and Technology
- Vol. 18 (3) , 292-298
The Electronegativity Analysis of c-C4F8as a Potential Insulation Substitute of SF6
- 1 March 2016
- Published by IOP Publishing in Plasma Science and Technology
- Vol. 18 (3) , 292-298
The Electronegativity Analysis of c-C4F8as a Potential Insulation Substitute of SF6