FMFlorencia Cecilia Menegalli

Florencia Cecilia Menegalli

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Florencia Cecilia Menegalli has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Films and edible coatings containing antioxidants - a review

    by Kaliana Sitonio Eça, Tanara Sartori, Florencia Cecilia Menegalli

    The incorporation of natural antioxidants into films and edible coatings can modify their structure, improving their functionality and applicability in foods, such as in fresh-cut fruits. This paper reviews the more recent literature on the incorporation of antioxidants from several sources into films and edible coatings, for application in fruits and vegetables. The use of synthetic antioxidants in foods has been avoided due to their possible toxic effects. Instead, a wide range of natural antioxidants (such as essential oils and plant extracts, as well as pure compounds, like ascorbic acid and α-tocopherol) have been incorporated into edible films and coatings to improve their bioactive properties. Films and coatings containing added antioxidants help to preserve or enhance the sensory properties of foods and add value to the food products by increasing their shelf life.


  • Open Access

    Coberturas e Filmes Comestíveis Aditivados de Compostos Bioativos para Conservação de Frutas

    by Kaliana Sitonio Eça, Florencia Cecilia Menegalli

    Filmes e coberturas comestíveis são aplicados em frutos por terem a capacidade de retardar a perda de compostos aromáticos, permitir a manutenção das propriedades mecânicas dos produtos e por funcionarem como barreiras a gorduras e solutos. Além disso, formam uma camada de proteção adicional para os produtos e podem criar uma atmosfera modificada ao redor dos mesmo, em função da permeabilidade seletiva aos gases O2 e CO2, reduzindo assim a taxa de respiração, o metabolismo e, consequentemente, sua senescência. Um uso potencial desta tecnologia é a capacidade das coberturas e filmes de agirem como carreadores de aditivos alimentícios, como antioxidantes e antimicrobianos, para a superfície do alimento. Esta revisão discute o uso de coberturas e filmes comestíveis aditivados de compostos com propriedades funcionais e destaca os recentes avanços obtidos pela incoporação desses agentes. As tendências futuras para a área de estudo também são apresentadas


  • Open Access

    Propriedades físicas de filmes comestíveis a base de proteínas miofibrilares de carne bovina

    by Silvia Maria A de Souza, Paulo Jose Do A Sobral, Florencia Cecilia Menegalli

    As proteínas miofibrilares têm excelentes propriedades filmogênicas. O objetivo deste artigo foi o estudo do efeito do tratamento térmico, do pH e da concentração de plastificante (Cp) da solução filmogênica (SF) a base de proteínas miofibrilares liofilizadas (PML) extraídas de músculo bovino empregando-se a técnica de solubilização por soluções salinas diluídas, sobre algumas propriedades físicas dos filmes comestíveis, utilizando-se uma metodologia de superfície e resposta (MSR). Os filmes foram elaborados a partir de SF contendo 1 g de PML/100 g de SF, e de Cp-50 a 75 g de glicerol/100 g de PML. A PML era dispersa em água sob agitação moderada, e o pH era mantido entre 2,5-3,5 com o emprego de ácido acético. As SF foram submetidas a tratamentos térmicos em diferentes temperaturas (35-75ºC), por 45 minutos. Os filmes foram secos em estufa com circulação forçada de ar a 37ºC/18 h, condicionados em 75% de umidade relativa, a 25ºC/48 h, antes da realização de análises: propriedades mecânicas - teste de perfuração; opacidade aparente por espectrofotometria; solubilidade, por imersão em água; e permeabilidade ao vapor de água, pelo método gravimétrico. Em geral, os filmes se apresentaram com boa aparência, translúcidos, de fácil manuseio e tátil, exceto para os filmes formados em pH 2,5 e em temperatura (35ºC), com espessura média de 0,040±0,005 mm. O pH da SF afetou significativamente todas as propriedades físicas estudadas. A temperatura do tratamento térmico da SF afetou significativamente a força na ruptura, solubilidade e a permeabilidade ao vapor de água (Pva). Esse tratamento pode favorecer as interações intermoleculares via formação de pontes dissulfídicas, mas um tratamento muito intenso pode reverter esse efeito por alterações estruturais irreversíveis nas proteínas. A Cp afetou significativamente todas as propriedades estudadas, com exceção da opacidade aparente. O plastificante aumenta a mobilidade das macromoléculas, reduzindo suas interações, com conseqüências em todas as propriedades físicas.


  • Physical–chemical, thermal, and functional properties of achira (Canna indica L.) flour and starch from different geographical origin

    by Margarita M. Andrade‐Mahecha, Delia R. Tapia‐Blácido, Florencia C. Menegalli

    Achira (Canna indica L.) is a plant native to the Andes in South America, a starchy source, and its cultivation has expanded to different tropical countries, like Brazil. In order to evaluate the potential of this species, starch and flours with different particle size were obtained from Brazilian achira rhizomes. Proximal analyses, size distribution, SEM, swelling power, solubility, DSC, XRD analysis, and FTIR were performed for characterization of these materials. Flours showed high dietary fiber content (16.5–32.2% db) and high concentration of starch in the case of the smaller particle size fraction. Significant differences in protein and starch content, swelling power, solubility, and thermal properties were observed between the Brazilian and the Colombian starch. All the studied materials displayed the B‐type XRD pattern with relative crystallinity of 20.1% for the flour and between 27.0 and 28.0% for the starches. Results showed that the starch and flour produced from achira rhizomes have great technological potential for use as functional ingredient in the food industry.


  • Isolation and characterization of the flour and starch of plantain bananas (Musa paradisiaca)

    by Franciele Maria Pelissari, Margarita María Andrade‐Mahecha, Paulo José Do Amaral Sobral, Florencia Cecilia Menegalli

    Plantain bananas of the variety “Terra” (Musa paradisiaca) may have industrial value due to their high starch content. In this research, the flour and starch of such unripe fruit were isolated and their chemical, physicochemical, and structural characteristics were determined. Banana flour and starch had a dry basis yield of 50.6 and 28.5%, and an average granule size of 31.7 and 47.3 µm, respectively. Both raw materials revealed a C‐type pattern and high gelatinization temperatures. The peak viscosity was greater for flour (378.0 RVU) than for starch (252.6 RVU), although the final viscosity was lower. At temperatures above 65°C, the swelling power of banana flour was lower than that of starch, while the solubility of flour was greater than that of starch at all temperatures. Furthermore, the presence of other components in banana flour influenced its physicochemical properties. In general, the flour and starch processed from unripe bananas have numerous possible uses as ingredients in food systems and for other industrial purposes.


  • Open Access

    Dynamic and steady: shear rheological properties of xanthan and guar gums dispersed in yellow passion fruit pulp (Passiflora edulis f. flavicarpa)

    by I. C. F Moraes, L. H Fasolin, R. L Cunha, F. C Menegalli

    Yellow passion fruit pulp is unstable, presenting phase separation that can be avoided by the addition of hydrocolloids. For this purpose, xanthan and guar gum [0.3, 0.7 and 1.0% (w/w)] were added to yellow passion fruit pulp and the changes in the dynamic and steady - shear rheological behavior evaluated. Xanthan dispersions showed a more pronounced pseudoplasticity and the presence of yield stress, which was not observed in the guar gum dispersions. Cross model fitting to flow curves showed that the xanthan suspensions also had higher zero shear viscosity than the guar suspensions, and, for both gums, an increase in temperature led to lower values for this parameter. The gums showed different behavior as a function of temperature in the range of 5 - 35ºC. The activation energy of the apparent viscosity was dependent on the shear rate and gum concentration for guar, whereas for xanthan these values only varied with the concentration. The mechanical spectra were well described by the generalized Maxwell model and the xanthan dispersions showed a more elastic character than the guar dispersions, with higher values for the relaxation time. Xanthan was characterized as a weak gel, while guar presented a concentrated solution behavior. The simultaneous evaluation of temperature and concentration showed a stronger influence of the polysaccharide concentration on the apparent viscosity and the G' and G" moduli than the variation in temperature.


  • Open Access

    Películas biodegradables: la incorporación de microfibras y nanofibras de celulosa obtenido a partir de fuentes vegetales

    by Margarita María Andrade Mahecha, Delia Rita Tapia Blácido, Florencia Cecilia Menegalli

    Diferentes estudos têm evidenciado que a celulose incorporada a matrizes poliméricas atua como um material de reforço, melhorando a resistência mecânica de filmes biodegradáveis e em alguns casos, a permeabilidade ao vapor de água. A eficácia deste reforço está associada à natureza da celulose, sua cristalinidade e as características da interface reforço/matriz polimérica. O estudo de microfibras e nanofibras de celulose como uma fase de reforço em filmes biodegradáveis começou há 15 anos. Desde então, tem aumentado o interesse em desenvolver metodologias focadas ao aproveitamento de resíduos agrícolas para a obtenção de fibras e a incorporação desses materiais em matrizes poliméricas. Diante disto, este trabalho apresenta uma revisão bibliográfica sobre microfibras e nanofibras de celulose como materiais de reforço em filmes biodegradáveis a base de biopolímeros. Abordam-se tópicos como as fibras vegetais, dada sua natureza lignocelulósica, as diferenças entre microfibras e nanofibras, fontes vegetais exploradas e métodos desenvolvidos na última década para a obtenção desses materiais. Finalmente, uma compilação de trabalhos recentes sobre microcompósitos e nanocompósitos biodegradáveis mostra resultados promissores nas propriedades mecânicas e de barreira dessas estruturas poliméricas. A informação apresentada evidencia o potencial desta área de pesquisa para futuros trabalhos que podem ser conduzidos para desenvolvimento de tecnologia de produção desses materiais em escala industrial e sua utilização como embalagens de alimentos


  • Open Access

    Influência do tratamento térmico e da acidez no comportamento reológico de amidos nativos funcionais de milho cerosos orgânicos comerciais

    by Lizielle Maria Ricardo Guerreiro, Florencia Cecilia Meneguelli

    Starches are widely utilized in foodstuffs as salad dressing, sauce, and processed foods. However, the functional properties of native starches are affected by processes such as heat treatment, acidity, and high shear stress. Starches can be modified chemically in order to have characteristics required by industries, but not to attribute the food a natural and safe label. Another option is to obtain native starches resistant to food processing stress conditions. The objective of this paper is the evaluation of commercial native organic starches under food processing stress conditions such as heat treatment and acidity. Suspensions of native functional organic starches (9460 and 9560, National Starch, and Chemical Industry) were prepared at 5% concentration (w/v), acidified with 1M citric acid, or autoclaved at 121 °C for 30 minutes. The results were evaluated by optical microscopy, flow curve, and viscoelastic aspects which were obtained by steady and oscillatory rheology. The acidity and heat treatment increased the starch gels structure that resisted to the processing stress conditions. The starch gels exhibited non-newtonian (pseudoplastic) and thixotropic behavior. Flow data were fitted to the Power Law or Herschel-Bukley models. All samples exhibited gel-like viscoelastic behavior which was preserved under several stress conditions.Os amidos são amplamente utilizados em alimentos como molhos para salada, molhos e pratos prontos. Entretanto, as propriedades funcionais de amidos nativos não resistem aos processos estressantes tais como tratamento térmico, acidez e alto cisalhamento. Os amidos podem ser modificados quimicamente neste sentido, mas não atribuem ao alimento o rótulo de natural. Uma outra opção é obter amidos naturais resistentes às condições de estresse. O objetivo do presente trabalho foi a avaliação de dois amidos que se comercializam rotulados como nativos e orgânicos frente ao tratamento térmico e à acidez. Suspensões dos amidos nativos funcionais orgânicos (9460 e 9560, National Starch and Chemical Industrial) preparadas numa concentração de 5% (peso/volume), foram acidificadas com ácido cítrico 1M ou autoclavadas a 121 °C por 30 minutos. O resultado dos tratamentos foi avaliado por microscopia óptica, pelas curvas de escoamento e pelos espectros mecânicos, obtidos por reologia estacionária e dinâmica. A acidez e o tratamento térmico aumentaram a estruturação dos géis dos amidos, que resistiram aos processos estressantes. Os géis apresentaram comportamento não newtoniano, (pseudoplástico) e tixotrópico. O comportamento pode ser modelado pela equação Lei da Potência ou Herschel-Bukley. Todos os géis apresentaram comportamento viscoelástico de gel fraco que foi preservado nos diversos tratamentos


  • Open Access

    Experimental study of fluidized bed agglomeration of acerola powder

    by G. C. Dacanal, F. C. Menegalli

    The aim of this work was to study the main effects of acerola powder on fluidized bed agglomeration. A 2(4-1) fractional factoring design was used to evaluate the main operating conditions (fluidizing air temperature, fluidizing air velocity, atomizing air flow and height of nozzle in the bed). The mechanical and physicochemical product changes were determined by analysis of particle diameter, moisture content, wetting time and bed porosity. The particle enlargement by agglomeration occurred when the relative humidity in the bed increased and, thus, the moisture of the product increased. However, the excessive increase in relative humidity resulted in a decrease in yield, caused by caking and product incrustation. The consolidation of small granules resulted in an increase in the instant properties, decreasing the wetting time and increasing the solubility in a short period of agitation


  • Contribution of the Starch, Protein, and Lipid Fractions to the Physical, Thermal, and Structural Properties of Amaranth ( Amaranthus caudatus ) Flour Films

    by D. Tapia‐Blácido, A.N. Mauri, F.C. Menegalli, P.J.A. Sobral, M.C. Añón

    ABSTRACT:  Amaranth protein–lipid (PL) and protein (P) films were elaborated and compared with amaranth flour films in order to determine the contribution of the interactions between the biopolymer (starch and protein) and the lipids to the film properties. The films were made by the casting method, using the same glycerol concentration (0.9 g glycerol/100 g solution). A separation of the lipid fraction in the PL films and a polymorphic transformation of the corresponding fatty acids were observed by differential scanning calorimetry (DSC) and verified by an analysis of the microstructure by scanning electron microscopy (SEM). The flour films showed no separation of the lipid fraction, evidence that the lipids were strongly associated with the proteins and homogenously distributed throughout the starch network, contributing to the good mechanical properties when compared to the PL films and to the excellent barrier properties when compared to both the PL and P films. The protein‐protein interactions also contributed to the mechanical properties of the flour films. The presence of proteins and lipids in the flour films had an important effect on film solubility, and also on the color and opacity of the films. This study showed that the flour film properties depended on the interactions formed by their polymers (starches and proteins) and by the lipid, on the distribution of these interactions within the film matrix and on the concentrations of each component in the film.