ESEduardo Sabio

Eduardo Sabio

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Eduardo Sabio has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Batch and Continuous Column Adsorption of p-Nitrophenol onto Activated Carbons with Different Particle Sizes

    by Beatriz Ledesma, Eduardo Sabio, Carmen María González-García, Silvia Román, Maria Emilia Fernandez, Pablo Bonelli, Ana L. Cukierman

    The study focused on investigating the solvent adsorption of p-Nitrophenol (PNP) onto activated carbons for wastewater treatment. It explored the influence of adsorbate concentration and adsorbent size on equilibrium isotherms and removal rates to develop efficient adsorption processes. The study examined adsorption isotherms under equilibrium conditions utilizing both the Langmuir and Double-Langmuir models and the Dubinin–Radushkevich equation. Remarkably, all the models demonstrated equally excellent fitting to the experimental data. Kinetics of PNP adsorption were investigated using pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetic models. This provided insights into the dominant adsorption mechanism and mass transfer phenomena, aiding the design of efficient wastewater treatment processes. Strong correlations (correlation coefficients > 0.9) were found between the models and experimental data for three types of activated carbons under batch conditions. This validation enhances the reliability and applicability of the models, supporting their practical use. The study also observed a slight increase in maximum adsorption capacity (qmax) with decreasing particle size, although there is not a significant difference: 340, 350, and 365 mg·g−1, for CB-L, CB-M, and CB-S, respectively. This insight helps in selecting appropriate activated carbon for effective PNP removal, considering both adsorption capacity and particle size. Furthermore, the analysis of PNP adsorption under dynamic conditions in fixed-bed columns highlighted the significance of inlet velocity and carbon mass in determining breakthrough time, with particle size playing a secondary role. This information aids in optimizing the design and operation of fixed-bed adsorption systems for efficient PNP removal. In summary, this study’s significant contributions lie in enhancing our understanding of PNP adsorption in wastewater treatment. By investigating equilibrium isotherms, kinetics, and mass transfer phenomena, it provides validated models, insights into adsorption capacity and particle size, and practical guidance for dynamic adsorption systems. These findings contribute to the development of efficient and sustainable wastewater treatment methods.


  • Open Access

    Hydrocarbonization. Does It Worth to Be Called a Pretreatment?

    by Silvia Román, Beatriz Ledesma, Andrés Álvarez-Murillo, Eduardo Sabio, J. F. González, Mara Olivares-Marín, Mouzaina Boutieb

    In this work, we aim to evaluate the potential of hydrothermal carbonization (also known as wet pyrolysis) as a pretreatment, by evaluating the changes induced in the raw material (cellulose) under varying experimental conditions. Hydrocarbonization processes were performed under different temperature, time and biomass/water ratios following a response surface methodology. The hydrochars obtained were characterized in terms of proximate analysis, behavior towards pyrolysis and combustion, heating value and surface textural and chemical features. The presence of typical hydrocarbonization reactions (dehydration, hydrolysis, decarboxylation, decarbonylation, recondensation, etc.) was only possible if a limit temperature (200°C) was used. Under these conditions, proximate analyses changed, the surface chemistry was modified, and the formation of a second lignite-type solid fraction was observed.


  • Open Access

    Hydrothermal Carbonization: Modeling, Final Properties Design and Applications: A Review

    by Silvia Román, Judy Libra, Nicole Berge, Eduardo Sabio, Kyoung Ro, Liang Li, Beatriz Ledesma, Andrés Álvarez, Sunyoung Bae

    Active research on biomass hydrothermal carbonization (HTC) continues to demonstrate its advantages over other thermochemical processes, in particular the interesting benefits that are associated with carbonaceous solid products, called hydrochar (HC). The areas of applications of HC range from biofuel to doped porous material for adsorption, energy storage, and catalysis. At the same time, intensive research has been aimed at better elucidating the process mechanisms and kinetics, and how the experimental variables (temperature, time, biomass load, feedstock composition, as well as their interactions) affect the distribution between phases and their composition. This review provides an analysis of the state of the art on HTC, mainly with regard to the effect of variables on the process, the associated kinetics, and the characteristics of the solid phase (HC), as well as some of the more studied applications so far. The focus is on research made over the last five years on these topics.


  • Open Access

    Homogeneous Diffusion Solid Model as a Realistic Approach to Describe Adsorption onto Materials with Different Geometries

    by E. Sabio, F. Zamora, C. M. González-García, B. Ledesma, A. Álvarez-Murillo, S. Román

    In this work, the adsorption kinetics of p-nitrophenol (PNP) onto several commercial activated carbons (ACs) with different textural and geometrical characteristics was studied. For this aim, a homogeneous diffusion solid model (HDSM) was used, which does take the adsorbent shape into account. The HDSM was solved by means of the finite element method (FEM) using the commercial software COMSOL. The different kinetic patterns observed in the experiments carried out can be described by the developed model, which shows that the sharp drop of adsorption rate observed in some samples is caused by the formation of a concentration wave. The model allows one to visualize the changes in concentration taking place in both liquid and solid phases, which enables us to link the kinetic behaviour with the main features of the carbon samples.


  • Open Access

    Production of Cost-Effective Mesoporous Materials from Prawn Shell Hydrocarbonization

    by S. Román, B. Ledesma, A. Álvarez-Murillo, E. Sabio, J. F. González, C. M. González

    In this work, prawn shell was studied as raw material for the production of mesoporous adsorbents via hydrocarbonization, studying the effect of temperature and time on the process reactivity and final characteristics of the hydrochars. By suitable characterization technique analyses (N2 adsorption at 77 K, SEM observation, ultimate analysis, surface composition), the materials were examined. It was found that in both cases mesoporous materials with low values of S BET due to the presence of CaCO3 on the material structure. In order to provide a potential application for these materials, the adsorption behaviour of hydrochars (HCs) as well as that of pristine prawn shells and ashes from prawn shell combustion was studied for the first time with the model compound p-nitrophenol (PNP). The results indicated that HC treatment was beneficial and enhanced adsorption performance, especially at high values of equilibrium concentration, attaining adsorption capacities up to 1.6 mg g−1.


  • Adsorption of p-nitrophenol on activated carbon fixed-bed

    by E. Sabio, F. Zamora, J. Gañan, C.M. González-García, J.F. González


  • Characterisation under static and dynamic conditions of commercial activated carbons for their use in wastewater plants

    by E. Sabio, F. Zamora, J.F. González, C.M. González García, S. Román, A. Al-Kassir