Qingpu Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qingpu Wang has a total of 115 co-authors. Here are the top co-authors by number of shared publications:
Fen Bai
College of science, China University of Petroleum (East China), Qingdao, China
9 shared publicationsHongbin Shen
Shandong University
9 shared publicationsXingyu Zhang
Shandong University
9 shared publicationsZhaojun Liu
School of Information Science & Engineering, Shandong University, Jinan 250100, China
9 shared publicationsJiaxiong Fang
Advanced Research Center for Optics, Shandong University, Jinan, China
8 shared publicationsWeixia Lan
Shandong University
8 shared publications
Latest Publications
- Open Access
- 19 October 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (20) , 3672
Actively Controllable Terahertz Metal–Graphene Metamaterial Based on Electromagnetically Induced Transparency Effect
A metal–graphene metamaterial device exhibiting a tunable, electromagnetically induced transparency (EIT) spectral response at terahertz frequencies is investigated. The metamaterial structure is composed of a strip and a ring resonator, which serve as the bright and dark mode to induce the EIT effect. By employing the variable conductivity of graphene to dampen the dark resonator, the response frequency of the device shifts dynamically over 100 GHz, which satisfies the convenient post-fabrication tunability requirement. The slow-light behavior of the proposed device is also analyzed with the maximum group delay of 1.2 ps. The sensing performance is lastly studied and the sensitivity can reach up to 100 GHz/(RIU), with a figure of merit (FOM) value exceeding 4 . Therefore, the graphene-based metamaterial provides a new miniaturized platform to facilitate the development of terahertz modulators, sensors, and slow-light applications.- 19 October 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (20) , 3672
Open AccessActively Controllable Terahertz Metal–Graphene Metamaterial Based on Electromagnetically Induced Transparency Effect
A metal–graphene metamaterial device exhibiting a tunable, electromagnetically induced transparency (EIT) spectral response at terahertz frequencies is investigated. The metamaterial structure is composed of a strip and a ring resonator, which serve as the bright and dark mode to induce the EIT effect. By employing the variable conductivity of graphene to dampen the dark resonator, the response frequency of the device shifts dynamically over 100 GHz, which satisfies the convenient post-fabrication tunability requirement. The slow-light behavior of the proposed device is also analyzed with the maximum group delay of 1.2 ps. The sensing performance is lastly studied and the sensitivity can reach up to 100 GHz/(RIU), with a figure of merit (FOM) value exceeding 4 . Therefore, the graphene-based metamaterial provides a new miniaturized platform to facilitate the development of terahertz modulators, sensors, and slow-light applications. - 7 March 2017
- Published by Springer Nature in Applied Physics B
- Vol. 123 (3) , 1-8
Gold nanorods saturable absorber for Q-switched Nd:GAGG lasers at 1 μm
- 7 March 2017
- Published by Springer Nature in Applied Physics B
- Vol. 123 (3) , 1-8
Gold nanorods saturable absorber for Q-switched Nd:GAGG lasers at 1 μm
- 17 February 2017
- Published by IOP Publishing in Laser Physics Letters
- Vol. 14 (4) , 045804
Dual-wavelength synchronously mode-locked laser of a Nd:Y3ScAl4O12 disordered crystal
We demonstrated a dual-wavelength passively mode-locked Nd:YSAG laser using a semiconductor saturable absorber mirror as the modulator. The maximum average output power was about 470 mW under the absorbed pump power of 4.2 W. The laser exhibited stable double wavelength synchronous mode-locked oscillation at 1060.8 nm and 1063.2 nm. The pulsed repetition rate was about 87.4 MHz, and the single pulse energy was calculated to be 5.38 nJ. The envelope of the autocorrelation interference pattern presented a Gaussian pulse shape and the pulse width was about 3.8 ps. The beat pulse had a repetition rate of 0.67 THz and the beat pulse width was about 800 fs. Additionally, numerical simulation was conducted to analyze the autocorrelation trace.
- 17 February 2017
- Published by IOP Publishing in Laser Physics Letters
- Vol. 14 (4) , 045804
Dual-wavelength synchronously mode-locked laser of a Nd:Y3ScAl4O12 disordered crystal
We demonstrated a dual-wavelength passively mode-locked Nd:YSAG laser using a semiconductor saturable absorber mirror as the modulator. The maximum average output power was about 470 mW under the absorbed pump power of 4.2 W. The laser exhibited stable double wavelength synchronous mode-locked oscillation at 1060.8 nm and 1063.2 nm. The pulsed repetition rate was about 87.4 MHz, and the single pulse energy was calculated to be 5.38 nJ. The envelope of the autocorrelation interference pattern presented a Gaussian pulse shape and the pulse width was about 3.8 ps. The beat pulse had a repetition rate of 0.67 THz and the beat pulse width was about 800 fs. Additionally, numerical simulation was conducted to analyze the autocorrelation trace.
- 13 April 2016
- Published by IOP Publishing in Laser Physics
- Vol. 26 (5) , 055802
1357 nm passively Q-switched crystalline ceramic laser based on multilayer graphene
1357 nm single wavelength passively Q-switched Nd:YAG ceramic lasers are demonstrated with a multilayer graphene sheets saturable absorber (SA). During an increase in the incident pump power, the laser exhibited stable Q-switched oscillation, which showed that our graphene SA provided Q-switched modulation successfully. The maximum average output power was 340 mW, and the corresponding pulse width, pulse repetition rate, single pulse energy and peak power were 380 ns, 209 kHz, 53 μJ and 139 W, respectively. Our results illustrate that graphene can be used as an SA for 1357 nm passively Q-switched Nd:YAG ceramic lasers.
- 13 April 2016
- Published by IOP Publishing in Laser Physics
- Vol. 26 (5) , 055802
1357 nm passively Q-switched crystalline ceramic laser based on multilayer graphene
1357 nm single wavelength passively Q-switched Nd:YAG ceramic lasers are demonstrated with a multilayer graphene sheets saturable absorber (SA). During an increase in the incident pump power, the laser exhibited stable Q-switched oscillation, which showed that our graphene SA provided Q-switched modulation successfully. The maximum average output power was 340 mW, and the corresponding pulse width, pulse repetition rate, single pulse energy and peak power were 380 ns, 209 kHz, 53 μJ and 139 W, respectively. Our results illustrate that graphene can be used as an SA for 1357 nm passively Q-switched Nd:YAG ceramic lasers.
- Open Access
- 28 March 2016
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 6 (4) , 1358-1366
Passively mode-locked Nd^3+:YVO_4 laser using a molybdenum disulfide as saturable absorber
A molybdenum disulfide (MoS2) saturable absorber (SA) was fabricated by vacuum filtration method and employed to achieve passively mode-locked Nd3+:YVO4 laser. The optical properties of MoS2 were systematically characterized and the modulation depth was measured to be 7%. Stable continuous-wave mode-locked (CWML) laser at 1064.2 nm was realized with a pulse repetition frequency of 88.3 MHz and a pulse width of 12.7 ps. The maximum output power of 89 mW was obtained under an incident pump power of 2.1 W. The single pulse energy and peak power were calculated to be 1.0 nJ and 83.3 W, respectively.
- 28 March 2016
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 6 (4) , 1358-1366
Open AccessPassively mode-locked Nd^3+:YVO_4 laser using a molybdenum disulfide as saturable absorber
A molybdenum disulfide (MoS2) saturable absorber (SA) was fabricated by vacuum filtration method and employed to achieve passively mode-locked Nd3+:YVO4 laser. The optical properties of MoS2 were systematically characterized and the modulation depth was measured to be 7%. Stable continuous-wave mode-locked (CWML) laser at 1064.2 nm was realized with a pulse repetition frequency of 88.3 MHz and a pulse width of 12.7 ps. The maximum output power of 89 mW was obtained under an incident pump power of 2.1 W. The single pulse energy and peak power were calculated to be 1.0 nJ and 83.3 W, respectively.
- 1 January 2016
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 14 (11) , 111402-111406
Low threshold high stability passively mode-locked laser performance of a disordered crystal: Nd3+:Gd0.5Y2.5Al5O12
A stable passively mode-locked laser of (Nd:GYAG) disordered crystal is experimentally investigated both using Z-type and W-type cavities with a semiconductor saturable absorbed mirror. The continuous-wave mode-locked threshold of the absorbed pump power is just 1.8 W. The maximum average output power is 210 mW, which is obtained at the absorbed pump power of 2.3 W. The pulse width is measured to be 11.1 ps assuming a Gaussian shape.- 1 January 2016
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 14 (11) , 111402-111406
Low threshold high stability passively mode-locked laser performance of a disordered crystal: Nd3+:Gd0.5Y2.5Al5O12
A stable passively mode-locked laser of (Nd:GYAG) disordered crystal is experimentally investigated both using Z-type and W-type cavities with a semiconductor saturable absorbed mirror. The continuous-wave mode-locked threshold of the absorbed pump power is just 1.8 W. The maximum average output power is 210 mW, which is obtained at the absorbed pump power of 2.3 W. The pulse width is measured to be 11.1 ps assuming a Gaussian shape.- 18 November 2015
- Published by IOP Publishing in Laser Physics Letters
- Vol. 12 (12) , 125806
Investigation of continuous wave and pulsed laser performance based on Nd 3+ :Gd 0.6 Y 1.4 SiO 5 crystal
We systematically investigated a laser diode (LD) pumped Nd:GYSO (Nd 3+ :Gd 0.6 Y 1.4 SiO 5 ) laser. The output power of the continuous wave laser was as high as 3.5 W with a slope efficiency of 31.8%. In the Q-switched operation; the laser exhibited dual-wavelengths output (1073.6 nm and 1074.7 nm) synchronously with a Cr 4+ :YAG as the saturable absorber (SA). Additionally, a passively mode-locked laser was demonstrated using a semiconductor SA mirror with a maximum average output power of 510 mW at a central wavelength of 1074 nm, while the pulse width of the laser was as short as 5 ps. Our experiment proved that the Nd:GYSO mixed crystal was a promising material for a solid-state laser.
- 18 November 2015
- Published by IOP Publishing in Laser Physics Letters
- Vol. 12 (12) , 125806
Investigation of continuous wave and pulsed laser performance based on Nd 3+ :Gd 0.6 Y 1.4 SiO 5 crystal
We systematically investigated a laser diode (LD) pumped Nd:GYSO (Nd 3+ :Gd 0.6 Y 1.4 SiO 5 ) laser. The output power of the continuous wave laser was as high as 3.5 W with a slope efficiency of 31.8%. In the Q-switched operation; the laser exhibited dual-wavelengths output (1073.6 nm and 1074.7 nm) synchronously with a Cr 4+ :YAG as the saturable absorber (SA). Additionally, a passively mode-locked laser was demonstrated using a semiconductor SA mirror with a maximum average output power of 510 mW at a central wavelength of 1074 nm, while the pulse width of the laser was as short as 5 ps. Our experiment proved that the Nd:GYSO mixed crystal was a promising material for a solid-state laser.
- 17 November 2015
- Published by Optica Publishing Group in Applied Optics
- Vol. 54 (33) , 9902-9905
Passively Q-switched Nd:YAG ceramic laser with V^3+:YAG saturable absorber at 1357 nm
1357 nm single-wavelength continuous-wave and passively -switched Nd:YAG ceramic crystal lasers have been experimentally demonstrated for the first time to our knowledge. The output power of the continuous-wave laser was as high as 2.4 W under the incident pump power of 14.8 W. The corresponding optical to optical efficiency was about 16.2% and the slope efficiency was about 18.6%. The -switched laser remained single-wavelength output with a maximum average output power of 628 mW at the incident pump power of 12.4 W. The corresponding pulse width was 21 ns and the repetition frequency was 15 kHz.- 17 November 2015
- Published by Optica Publishing Group in Applied Optics
- Vol. 54 (33) , 9902-9905
Passively Q-switched Nd:YAG ceramic laser with V^3+:YAG saturable absorber at 1357 nm
1357 nm single-wavelength continuous-wave and passively -switched Nd:YAG ceramic crystal lasers have been experimentally demonstrated for the first time to our knowledge. The output power of the continuous-wave laser was as high as 2.4 W under the incident pump power of 14.8 W. The corresponding optical to optical efficiency was about 16.2% and the slope efficiency was about 18.6%. The -switched laser remained single-wavelength output with a maximum average output power of 628 mW at the incident pump power of 12.4 W. The corresponding pulse width was 21 ns and the repetition frequency was 15 kHz.- Open Access
- 2 May 2014
- Published by Optica Publishing Group in Optics Express
- Vol. 22 (9) , 11244-11253
Novel gas sensor combined active fiber loop ring-down and dual wavelengths differential absorption method
A novel active fiber loop ring-down gas sensor combined with dual wavelengths differential absorption method is proposed. Two Distributed Feedback Laser Diodes (DFB LDs) with different wavelengths are employed. One LD whose wavelength covered with the absorption line of target gas is used for sensing. Another LD whose wavelength is centered outside the absorption line is used for reference. The gas absorption loss can be obtained by differencing the reference signal and sensing signal. Compared with traditional method of one wavelength employed, it can eliminate the influence of the cavity loss variety and photoelectric device drift in the system efficiently. An Erbium Doped Fiber Amplifier (EDFA) with Automatic Gain Control (AGC) is used to compensate the loss of the light in the ring-down cavity, which will increase the cavity round trips and improve the precision of gas detection. And two fiber Bragg gratings (FBGs) are employed to get rid of amplified spontaneous emission (ASE) spectrum noise as filters. The calibrating ethyne samples of different concentrations are measured with a 65 mm long gas cell in order to evaluate the effect of reference. The results show the relative deviation is found to be less than ± 0.4% of 0.1% ethyne when a certain additional loss from 0 to 1.2dB is introduced to the cavity and the relative deviation of measured concentration is less than ± 0.5% over 24 hours.
- 2 May 2014
- Published by Optica Publishing Group in Optics Express
- Vol. 22 (9) , 11244-11253
Open AccessNovel gas sensor combined active fiber loop ring-down and dual wavelengths differential absorption method
A novel active fiber loop ring-down gas sensor combined with dual wavelengths differential absorption method is proposed. Two Distributed Feedback Laser Diodes (DFB LDs) with different wavelengths are employed. One LD whose wavelength covered with the absorption line of target gas is used for sensing. Another LD whose wavelength is centered outside the absorption line is used for reference. The gas absorption loss can be obtained by differencing the reference signal and sensing signal. Compared with traditional method of one wavelength employed, it can eliminate the influence of the cavity loss variety and photoelectric device drift in the system efficiently. An Erbium Doped Fiber Amplifier (EDFA) with Automatic Gain Control (AGC) is used to compensate the loss of the light in the ring-down cavity, which will increase the cavity round trips and improve the precision of gas detection. And two fiber Bragg gratings (FBGs) are employed to get rid of amplified spontaneous emission (ASE) spectrum noise as filters. The calibrating ethyne samples of different concentrations are measured with a 65 mm long gas cell in order to evaluate the effect of reference. The results show the relative deviation is found to be less than ± 0.4% of 0.1% ethyne when a certain additional loss from 0 to 1.2dB is introduced to the cavity and the relative deviation of measured concentration is less than ± 0.5% over 24 hours.
- 26 November 2013
- Published by Springer Nature in Applied Physics B
- Vol. 116 (2) , 501-505
Eye-safe Raman laser based on BaTeMo2O9 crystal
- 26 November 2013
- Published by Springer Nature in Applied Physics B
- Vol. 116 (2) , 501-505
Eye-safe Raman laser based on BaTeMo2O9 crystal