NHNidal Hilal

Nidal Hilal

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nidal Hilal has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Editorial

    by Nidal Hilal, Raphael Semiat, Eric M.V. Hoek


  • List of Contributors

    by W. Richard Bowen, Nidal Hilal, Clive J. Roberts, Huabing Yin, Vasileios Koutsos, Paul Melvyn Williams, Matthew Barrow, Daniel Johnson, Gordon McPhee, Phil Dobson

  • Operating Conditions Corresponding to Optimal Final Properties of Activated Sludge Using the DOE and RSM Techniques

    by Tan Phong Nguyen, Nidal Hilal, Nicholas P. Hankins

    This paper presents the influence of four relevant factors on the flocculation behavior in the activated sludge process: organic loading rate (COD), solid retention time (SRT), dissolved oxygen (DO), and calcium ion concentration, and links them to a selected set of process responses: sludge volume index (SVI), turbidity, organic removal rate (COD), and suspended solids (SS) removal. The “Design of Experiments” (DOE) and the “Response Surface Methods” (RSM) approaches are used to establish the operating conditions corresponding to optimal final properties of the activated sludge. Using these techniques, the results show that it is indeed feasible to locate the operating conditions which optimize the flocculation process and the sludge settling properties. The study represents a first attempt to evaluate the flocculation process in activated sludge using the DOE/RSM approach.


  • Neural network modeling for separation of bentonite in tubular ceramic membranes

    by Nidal Hilal, Oluwaseun O. Ogunbiyi, Mohammed Al-Abri


  • Investigation of Kinetics and Mechanism Involved in the Biosorption of Heavy Metals on Activated Sludge

    by A.V. Ajay Kumar, Saleh Al Hashimi, Nidal Hilal

    An investigation has been undertaken to determine the removal of heavy metals (Cd2+, Cu2+, Ni2+ and Zn2+) of high environmental priority due to their toxicity from dilute aqueous solutions by biosorption using inexpensive biomaterials like activated sludge. Activated sludge is used widely in water treatment plants and is easily available. Each experiment was performed over a period of time to determine the biosorption of heavy metals from the aqueous phase to the solid phase. The maximum sorption uptake of the studied metal ions by activated sludge showed the following order: Cd2+ > Cu2+ > Ni2+ > Zn2+. The pseudo first- and second-order kinetic models were used to describe the kinetic data. The experimental data fit with the second-order kinetic model very well. The type of mechanism involved is analyzed in terms of the intraparticle diffusion model. Other models are also reviewed. Quantification of metal-biomass interactions, nature of adsorption, kinetics, ion-exchange as well as models used to characterize activated sludge biosorption are reviewed. All solutions are analyzed using inductively coupled plasma (ICP).


  • Combined Humic Substance and Heavy Metals Agglomeration, and Membrane Filtration under Saline Conditions

    by Nidal Hilal, Mohammed Al‐Abri, Hilal Al‐Hinai, Chris Somerfield

    Humic substances‐heavy metals complexation combined with membrane filtration is reported. The effects of salinity, humic substances (HS) concentration, heavy metals concentration, and trans‐membrane pressure (TMP) on HS and heavy metals retention using two membranes are studied. Membrane fouling is also studied at the aforementioned conditions. NF270 experienced higher fouling. Moreover, salinity tests showed increasing fouling rate and reduction in membrane retention with increasing salinity level. While increasing HS concentration reduced HS retention and increased heavy metals retention and membrane fouling. Heavy metals concentration reduced the NF270 HS retention, but did not affect the P005F HS retention. In addition, TMP did not affect HS and heavy metals retention nor NF270 fouling, but increased P005F fouling.


  • Experimental Investigation on the Separation of Bentonite using Ceramic Membranes: Effect of Turbulence Promoters

    by Nidal Hilal, Oluwaseun O. Ogunbiyi, Nick J. Miles

    The static turbulence promoters presented in this work are designed to enhance filtration within tubular ceramic membranes of 0.5 micron pore size. Permeate flux enhancement still remains a topical problem during tangential crossflow filtration. The decline in flux with time is due to the usual phenomena of concentration polarization and membrane fouling, operating parameters including the system pressures, feed composition, membrane type and configuration, and the hydrodynamics within the membrane module. Solute accumulates on the membrane surface and forms a high concentration gel layer, thus increasing the effective membrane thickness and reduces its hydraulic permeability. Turbulence promoters of varying pitch lengths have been incorporated into the work to ultimately reduce the deposition of bentonite particles on the membrane surface during microfiltration. Yeast suspensions have previously been used as feed suspensions in order to compare the effectiveness of the turbulence promoters with an organic foulant. The objective of this work was to investigate the influence of static promoter geometry on flux sustainability enhancement during bentonite suspension filtration. All experiments have been conducted on a tubular ceramic membrane and the experimental membrane rig as shown in this paper. The effects of feed concentration, feed temperature, system pressures, and crossflow rates on the membrane flux sustainability were investigated. It was found that the promoters greatly improved flux sustainability and membrane efficiency over time and in some cases, a loss of 3% in membrane efficiency was realized with turbulence promoters at higher feed temperatures. The use of the turbulence promoter caused a large scouring of the membrane surface and membrane cleaning was significantly improved compared to the experiments without the promoters.


  • Comparison of Different Pitch Lengths on Static Promoters for Flux Enhancement in Tubular Ceramic Membrane

    by Oluwaseun O. Ogunbiyi, Nick J. Miles, Nidal Hilal

    The use of turbulence promoters in membrane based processes have been investigated and are increasingly been used in industrial applications to minimize fouling and enhance the membrane flux. The efficiency of crossflow microfiltration is limited by membrane fouling and concentration polarization leading to flux decline during operation. A detailed study was carried out in the microfiltration of yeast suspensions using an in‐house rig and three different static turbulence promoters of varying pitch lengths. The design of the promoters incorporates a helical thread around the length of the insert, which induces turbulent flow through the membrane. This promotes good mixing of the feed fluid and minimizes concentration polarization effects. The testing of tubular membranes with the static inserts has been carried out and the results are included in the report. The pitch lengths used were 7 mm, 10 mm, and 14 mm and the parameters investigated included temperature, CFV, concentration of feed suspension and pressure. The flux decline data was recorded over a 50 minute filtration cycle and the cleaning protocol was employed after every cycle to restore the permeability of the membrane. A comparison of the membrane performance and efficiency of the three swirls inserts of varying pitch lengths together with a comparison of the degree of total, reversible, and irreversible fouling data amongst others are reported and discussed. The results obtained during the investigations of flux enhancement via static turbulence promoters into the tubular membranes are presented and are selected to differentiate the efficiency of the inserts and the degree of fouling associated with them.


  • Characterisation and Nanomechanical Properties of Ink-Jet Media Using Atomic Force Microscopy

    by Nidal Hilal, Shaman Pottage, Brian P. Atkin

    Commercial inkjet media is increasingly used in daily life; this use ranges from offices to digital photography. The impact that the development of this technology has had on the paper industry has been phenomenal. However, an increasing amount of paper is discarded and it is often after the introduction of complex chemical ink within its substrate. The understanding of the interactions between the layer of coated media and ink can be used to further understand and develop technology for the use of recycling office and photo papers. This paper presents the innovative concept in characterizing the surface of the inkjet media by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Comparisons are made between the data obtained from both atomic force microscopy and scanning electron microscopy of the receptive layer and surface analysis software that was used to obtain surface characteristics. In this study the hardness and force of interaction has also been examined by the means of nanoindentation measurements using silicon nitride cantilever tips and forces of interaction between a selection of colloid probes and the receptive layer of the inkjet media. The effect of loading force on indentation was studied in terms of approach of impact and type of media tested.


  • Effect of Carbon Dioxide in Seawater on Desalination: A Comprehensive Review

    by Khalid Al‐Anezi, Nidal Hilal

    The two main methods of removing salt from ocean water currently in use for large scale applications are: distillation using thermal desalination and membrane reverse osmosis separation. A detailed knowledge of the CO2 solubility in the seawater at the conditions prevailing in the system is required for the modeling of CO2 release in the multi‐stage flash distillers. The measurement of the solubility of CO2 in pure water has been extensively studied in the literature, whereas there is a lack of saline solutions studies. Several studies have investigated the solubility of CO2 in seawater under different temperatures and pressures without covering the conditions that prevailed in the desalination plants for example low pressures and high temperatures. The gas solubility can be theoretically estimated by considering the ionic strength and the salting‐out parameter in the low‐pressure regime, i.e., near atmospheric pressure. The measurements of gas solubility can be made as a function of the seawater temperature and salinity at low pressure where effect of pressure can be considered negligible. Alkaline scale formation causes fouling in the MSF plants and it is known that the rate of formation of calcium carbonate and magnesium hydroxide in seawater depends on a number of parameters such as temperature, pH, concentration of bicarbonate ions, rate of CO2 release, concentration of Ca2+ and Mg2+ ions, and total dissolved solids. This review shows an overview of the carbon dioxide solubility in the high concentrated saline water, carbonate equilibriums in the seawater and the various correlations used to characterize the CO2‐seawater system.