Daniel Bonamy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Daniel Bonamy has a total of 143 co-authors. Here are the top co-authors by number of shared publications:
- Cindy L. Rountree
Université Paris-Saclay, CEA, CNRS, SPEC
12 shared publications E. Bouchaud
12 shared publicationsDavy Dalmas
Laboratoire de Tribologie et Dynamique des Systemes CNRS Ecole Centrale de Lyon 36 Av- enue Guy de Collongue 69134 Ecully Cedex France
10 shared publications- Jonathan Barés
LMGC
10 shared publications C. Guillot
8 shared publicationsF. Daviaud
7 shared publications
Latest Publications
- Open Access
- 17 October 2024
- Published by Springer Nature in International Journal of Fracture
- Vol. 248 (1-3) , 257-273
Size-dependency and lattice-discreetness effect on fracture toughness in 2D crystals under antiplanar loading
Fracture toughness is the material property characterizing resistance to failure. Predicting its value from the solid structure at the atomistic scale remains elusive, even in the simplest situations of brittle fracture. We report here numerical simulations of crack propagation in two-dimensional fuse networks of different periodic geometries, which are electrical analogs of bidimensional brittle crystals under antiplanar loading. Fracture energy is determined from Griffith’s analysis of energy balance during crack propagation, and fracture toughness is determined from fits of the displacement fields with Williams’ asymptotic solutions. Significant size dependencies are evidenced in small lattices, with fracture energy and fracture toughness both converging algebraically with system size toward well-defined material-constant values in the limit of infinite system size. The convergence speed depends on the loading conditions and is faster when the symmetry of the considered lattice increases. The material constants at infinity obey Irwin’s relation and properly define the material resistance to failure. Their values are approached up to $$\sim 15\%$$ using the recent analytical method proposed in Nguyen and Bonamy (Phys Rev Lett 123:205503, 2019). Nevertheless, the deviation remains finite and does not vanish when the system size goes to infinity. We finally show that this deviation is a consequence of the lattice discreetness and decreases when the super-singular terms of Williams’ solutions (absent in a continuum medium but present here due to lattice discreetness) are taken into account.- 17 October 2024
- Published by Springer Nature in International Journal of Fracture
- Vol. 248 (1-3) , 257-273
Open AccessSize-dependency and lattice-discreetness effect on fracture toughness in 2D crystals under antiplanar loading
Fracture toughness is the material property characterizing resistance to failure. Predicting its value from the solid structure at the atomistic scale remains elusive, even in the simplest situations of brittle fracture. We report here numerical simulations of crack propagation in two-dimensional fuse networks of different periodic geometries, which are electrical analogs of bidimensional brittle crystals under antiplanar loading. Fracture energy is determined from Griffith’s analysis of energy balance during crack propagation, and fracture toughness is determined from fits of the displacement fields with Williams’ asymptotic solutions. Significant size dependencies are evidenced in small lattices, with fracture energy and fracture toughness both converging algebraically with system size toward well-defined material-constant values in the limit of infinite system size. The convergence speed depends on the loading conditions and is faster when the symmetry of the considered lattice increases. The material constants at infinity obey Irwin’s relation and properly define the material resistance to failure. Their values are approached up to $$\sim 15\%$$ using the recent analytical method proposed in Nguyen and Bonamy (Phys Rev Lett 123:205503, 2019). Nevertheless, the deviation remains finite and does not vanish when the system size goes to infinity. We finally show that this deviation is a consequence of the lattice discreetness and decreases when the super-singular terms of Williams’ solutions (absent in a continuum medium but present here due to lattice discreetness) are taken into account. - 19 July 2022
- Published by American Physical Society (APS) in Physical Review E
- Vol. 106 (1) , 015004
Effect of architecture disorder on the elastic response of two-dimensional lattice materials
We examine how disordering joint position influences the linear elastic behavior of lattice materials via numerical simulations in two-dimensional beam networks. Three distinct initial crystalline geometries are selected as representative of mechanically isotropic materials with low connectivity, mechanically isotropic materials with high connectivity, and mechanically anisotropic materials with intermediate connectivity. Introducing disorder generates spatial fluctuations in the elasticity tensor at the local (joint) scale. Proper coarse-graining reveals a well-defined continuum-level scale elasticity tensor. Increasing disorder aids in making initially anisotropic materials more isotropic. The disorder impact on the material stiffness depends on the lattice connectivity: Increasing the disorder softens lattices with high connectivity and stiffens those with low connectivity, without modifying the scaling between elastic modulus and density (linear scaling for high connectivity and cubic scaling for low connectivity). Introducing disorder in lattices with intermediate fixed connectivity reveals both scaling: the linear scaling occurs for low density, the cubic one at high density, and the crossover density increases with disorder. Contrary to classical formulations, this work demonstrates that connectivity is not the sole parameter governing elastic modulus scaling. It offers a promising route to access novel mechanical properties in lattice materials via disordering the architectures.
- 19 July 2022
- Published by American Physical Society (APS) in Physical Review E
- Vol. 106 (1) , 015004
Effect of architecture disorder on the elastic response of two-dimensional lattice materials
We examine how disordering joint position influences the linear elastic behavior of lattice materials via numerical simulations in two-dimensional beam networks. Three distinct initial crystalline geometries are selected as representative of mechanically isotropic materials with low connectivity, mechanically isotropic materials with high connectivity, and mechanically anisotropic materials with intermediate connectivity. Introducing disorder generates spatial fluctuations in the elasticity tensor at the local (joint) scale. Proper coarse-graining reveals a well-defined continuum-level scale elasticity tensor. Increasing disorder aids in making initially anisotropic materials more isotropic. The disorder impact on the material stiffness depends on the lattice connectivity: Increasing the disorder softens lattices with high connectivity and stiffens those with low connectivity, without modifying the scaling between elastic modulus and density (linear scaling for high connectivity and cubic scaling for low connectivity). Introducing disorder in lattices with intermediate fixed connectivity reveals both scaling: the linear scaling occurs for low density, the cubic one at high density, and the crossover density increases with disorder. Contrary to classical formulations, this work demonstrates that connectivity is not the sole parameter governing elastic modulus scaling. It offers a promising route to access novel mechanical properties in lattice materials via disordering the architectures.
- Open Access
- 23 July 2021
- Published by MDPI AG in Corrosion and Materials Degradation
- Vol. 2 (3) , 412-446
Stress Corrosion Cracking in Amorphous Phase Separated Oxide Glasses: A Holistic Review of Their Structures, Physical, Mechanical and Fracture Properties
Stress corrosion cracking is a well-known phenomenon in oxide glasses. However, how amorphous phase separation (APS) alters stress corrosion cracking, and the overall mechanical response of an oxide glass is less known in literature. APS is a dominant feature concerning many multicomponent systems, particularly the ternary sodium borosilicate (SBN) glass systems. Its three constituent oxides have significant industrial relevance, as they are the principal components of many industrial oxide glasses. Simulations and experimental studies demonstrate the existence of a two-phase metastable miscibility gap. Furthermore, theory suggests the possibility of three-phase APS in these oxide glasses. Literature already details the mechanisms of phase separation and characterizes SBN microstructures. Realizing that glasses are structurally sensitive materials opens a number of other questions concerning how the mesoscopic APS affects the continuum behavior of glasses, including dynamic fracture and stress corrosion cracking. This paper reviews current literature and provides a synthetic viewpoint on how APS structures of oxide glasses alter physical, mechanical, dynamic fracture, and stress corrosion cracking properties.
- 23 July 2021
- Published by MDPI AG in Corrosion and Materials Degradation
- Vol. 2 (3) , 412-446
Open AccessStress Corrosion Cracking in Amorphous Phase Separated Oxide Glasses: A Holistic Review of Their Structures, Physical, Mechanical and Fracture Properties
Stress corrosion cracking is a well-known phenomenon in oxide glasses. However, how amorphous phase separation (APS) alters stress corrosion cracking, and the overall mechanical response of an oxide glass is less known in literature. APS is a dominant feature concerning many multicomponent systems, particularly the ternary sodium borosilicate (SBN) glass systems. Its three constituent oxides have significant industrial relevance, as they are the principal components of many industrial oxide glasses. Simulations and experimental studies demonstrate the existence of a two-phase metastable miscibility gap. Furthermore, theory suggests the possibility of three-phase APS in these oxide glasses. Literature already details the mechanisms of phase separation and characterizes SBN microstructures. Realizing that glasses are structurally sensitive materials opens a number of other questions concerning how the mesoscopic APS affects the continuum behavior of glasses, including dynamic fracture and stress corrosion cracking. This paper reviews current literature and provides a synthetic viewpoint on how APS structures of oxide glasses alter physical, mechanical, dynamic fracture, and stress corrosion cracking properties.
- 10 May 2021
- Published by American Physical Society (APS) in Physical Review E
- Vol. 103 (5) , 053001
Controlling crackling dynamics by triggering low-intensity avalanches
We examine the effect of small, spatially localized excitations applied periodically in different manners, on the crackling dynamics of a brittle crack driven slowly in a heterogeneous solid. When properly adjusted, these excitations are observed to radically modify avalanche statistics and considerably limit the magnitude of the largest events. Surprisingly, this does not require information on the front loading state at the time of excitation; applying it either at a random location or at the most loaded point gives the same results. Subsequently, we unravel how the excitation amplitude, spatial extent, and frequency govern the effect. We find that the excitation efficiency is ruled by a single reduced parameter, namely the injected power per unit front length; the suppression of extreme avalanches is maximum at a well-defined optimal value of this control parameter. analysis opens another way to control the largest events in crackling dynamics. Beyond fracture problems, it may be relevant for crackling systems described by models of the same universality class, such as the wetting of heterogeneous substrates or magnetic walls in amorphous magnets.
- 10 May 2021
- Published by American Physical Society (APS) in Physical Review E
- Vol. 103 (5) , 053001
Controlling crackling dynamics by triggering low-intensity avalanches
We examine the effect of small, spatially localized excitations applied periodically in different manners, on the crackling dynamics of a brittle crack driven slowly in a heterogeneous solid. When properly adjusted, these excitations are observed to radically modify avalanche statistics and considerably limit the magnitude of the largest events. Surprisingly, this does not require information on the front loading state at the time of excitation; applying it either at a random location or at the most loaded point gives the same results. Subsequently, we unravel how the excitation amplitude, spatial extent, and frequency govern the effect. We find that the excitation efficiency is ruled by a single reduced parameter, namely the injected power per unit front length; the suppression of extreme avalanches is maximum at a well-defined optimal value of this control parameter. analysis opens another way to control the largest events in crackling dynamics. Beyond fracture problems, it may be relevant for crackling systems described by models of the same universality class, such as the wetting of heterogeneous substrates or magnetic walls in amorphous magnets.
- Open Access
Dynamic crack growth along heterogeneous planar interfaces: interaction with unidimensional strips
We examine theoretically and numerically fast propagation of a tensile crack along unidimensional strips with periodically evolving toughness. In such dynamic fracture regimes, crack front waves form and transport front disturbances along the crack edge at speed less than the Rayleigh wave speed and depending on the crack speed. In this configuration, standing front waves dictate the spatio-temporal evolution of the local crack front speed, which takes a specific scaling form. Analytical examination of both the short-time and long-time limits of the problem reveals the parameter dependency with strip wavelength, toughness contrast and overall fracture speed. Implications and generalization to unidimensional strips of arbitrary shape are lastly discussed.
Open AccessDynamic crack growth along heterogeneous planar interfaces: interaction with unidimensional strips
We examine theoretically and numerically fast propagation of a tensile crack along unidimensional strips with periodically evolving toughness. In such dynamic fracture regimes, crack front waves form and transport front disturbances along the crack edge at speed less than the Rayleigh wave speed and depending on the crack speed. In this configuration, standing front waves dictate the spatio-temporal evolution of the local crack front speed, which takes a specific scaling form. Analytical examination of both the short-time and long-time limits of the problem reveals the parameter dependency with strip wavelength, toughness contrast and overall fracture speed. Implications and generalization to unidimensional strips of arbitrary shape are lastly discussed.
- 19 January 2021
- Published by American Physical Society (APS) in Physical Review E
- Vol. 103 (1) , 013004
Dynamic crack growth along heterogeneous planar interfaces: Interaction with unidimensional strips
We examine theoretically and numerically fast propagation of a tensile crack along unidimensional strips with periodically evolving toughness. In such dynamic fracture regimes, crack front waves form and transport front disturbances along the crack edge at speed less than the Rayleigh wave speed and depending on the crack speed. In this configuration, standing front waves dictate the spatiotemporal evolution of the local crack front speed, which takes a specific scaling form. Analytical examination of both the short-time and long-time limits of the problem reveals the parameter dependency with strip wavelength, toughness contrast and overall fracture speed. Implications and generalization to unidimensional strips of arbitrary shape are lastly discussed.
- 19 January 2021
- Published by American Physical Society (APS) in Physical Review E
- Vol. 103 (1) , 013004
Dynamic crack growth along heterogeneous planar interfaces: Interaction with unidimensional strips
We examine theoretically and numerically fast propagation of a tensile crack along unidimensional strips with periodically evolving toughness. In such dynamic fracture regimes, crack front waves form and transport front disturbances along the crack edge at speed less than the Rayleigh wave speed and depending on the crack speed. In this configuration, standing front waves dictate the spatiotemporal evolution of the local crack front speed, which takes a specific scaling form. Analytical examination of both the short-time and long-time limits of the problem reveals the parameter dependency with strip wavelength, toughness contrast and overall fracture speed. Implications and generalization to unidimensional strips of arbitrary shape are lastly discussed.
- 17 December 2020
- Published by Taylor & Francis
- p. 77-80
Electrical conductance of a thermally perturbed packing: on the origin of granular fragility
In this paper, we propose to study experimentally internal rearrangements in a weakly perturbed granular material through electrical conductivity measurements. Small thermal perturbations lead to giant intermittent fluctuations of conductance gathered in bursts. The burst structure has been characterized via a statistical analysis of the waiting time At between two peaks of fluctuations. Both local and collective contributions have been isolated. The local part corresponds to individual beads creep. Its electrical signature is a power law distribution on At with an exponent related to the roughness exponent of the beads surface. The collective part is related to wall effect rather than collective vault reoganisations. Electrical response of the packing to several successive heating-cooling cycles also shows that, although thermal perturbations are insufficient to change the beads network, thermal ‘compaction’ can be observed in the sense that heating-cooling perturbations have less and less effect on the packing resistance.
- 17 December 2020
- Published by Taylor & Francis
- p. 77-80
Electrical conductance of a thermally perturbed packing: on the origin of granular fragility
In this paper, we propose to study experimentally internal rearrangements in a weakly perturbed granular material through electrical conductivity measurements. Small thermal perturbations lead to giant intermittent fluctuations of conductance gathered in bursts. The burst structure has been characterized via a statistical analysis of the waiting time At between two peaks of fluctuations. Both local and collective contributions have been isolated. The local part corresponds to individual beads creep. Its electrical signature is a power law distribution on At with an exponent related to the roughness exponent of the beads surface. The collective part is related to wall effect rather than collective vault reoganisations. Electrical response of the packing to several successive heating-cooling cycles also shows that, although thermal perturbations are insufficient to change the beads network, thermal ‘compaction’ can be observed in the sense that heating-cooling perturbations have less and less effect on the packing resistance.
- 17 December 2020
- Published by Taylor & Francis
- p. 463-466
Granular surface flows in a rotating drum: experiments and continuous description
Saint-Venant conservation equations are written for granular surface flows. Their application to steady surface flows in a rotating drum allows to find experimentally the closing relations of these equations from measurements of the velocity profile in the flowing layer at the center of the drum and from the flowing layer thickness and the static/flowing boundary profiles. The velocity profile is found linear with a gradient independent of both the flowing layer thickness and the static/flowing boundary local slope. Equations needed to close Saint-Venant equations are then deduced and compared to the ones obtained by the different theoretical approaches.
- 17 December 2020
- Published by Taylor & Francis
- p. 463-466
Granular surface flows in a rotating drum: experiments and continuous description
Saint-Venant conservation equations are written for granular surface flows. Their application to steady surface flows in a rotating drum allows to find experimentally the closing relations of these equations from measurements of the velocity profile in the flowing layer at the center of the drum and from the flowing layer thickness and the static/flowing boundary profiles. The velocity profile is found linear with a gradient independent of both the flowing layer thickness and the static/flowing boundary local slope. Equations needed to close Saint-Venant equations are then deduced and compared to the ones obtained by the different theoretical approaches.
- 10 December 2020
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 17 (6) , 1589-1600
Role of particle aggregation in the structure of dried colloidal silica layers
The process of colloidal drying gives way to particle self-assembly in numerous fields including photonics or biotechnology. Yet, the mechanisms and conditions driving the final particle arrangement in dry colloidal layers remain elusive. Here, we examine how the drying rate selects the nanostructure of thick dried layers in four different suspensions of silica nanospheres. Depending on particle size and dispersity, either an amorphous arrangement, a crystalline arrangement, or a rate-dependent amorphous-to-crystalline transition occurs at the drying surface. Amorphous arrangements are observed in the two most polydisperse suspensions while crystallinity occurs when dispersity is lower. Counter-intuitively in the latter case, a higher drying rate favors ordering of the particles. To complement these measurements and to take stock of the bulk properties of the layer, tests on the layer porosity were undertaken. For all suspensions studied herein, faster drying yields denser dry layers. Crystalline surface arrangement implies large bulk volume fraction (∼0.65) whereas amorphous arrangements can be observed in layers with either low (down to ∼0.53) or high (∼0.65) volume fraction. Lastly, we demonstrate via targeted additional experiments and SAXS measurements, that the packing structure of the layers is mainly driven by the formation of aggregates and their subsequent packing, and not by the competition between Brownian diffusion and convection. This highlights that a second dimensionless ratio in addition to the Peclet number should be taken into account, namely the aggregation over evaporation timescale.
- 10 December 2020
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 17 (6) , 1589-1600
Role of particle aggregation in the structure of dried colloidal silica layers
The process of colloidal drying gives way to particle self-assembly in numerous fields including photonics or biotechnology. Yet, the mechanisms and conditions driving the final particle arrangement in dry colloidal layers remain elusive. Here, we examine how the drying rate selects the nanostructure of thick dried layers in four different suspensions of silica nanospheres. Depending on particle size and dispersity, either an amorphous arrangement, a crystalline arrangement, or a rate-dependent amorphous-to-crystalline transition occurs at the drying surface. Amorphous arrangements are observed in the two most polydisperse suspensions while crystallinity occurs when dispersity is lower. Counter-intuitively in the latter case, a higher drying rate favors ordering of the particles. To complement these measurements and to take stock of the bulk properties of the layer, tests on the layer porosity were undertaken. For all suspensions studied herein, faster drying yields denser dry layers. Crystalline surface arrangement implies large bulk volume fraction (∼0.65) whereas amorphous arrangements can be observed in layers with either low (down to ∼0.53) or high (∼0.65) volume fraction. Lastly, we demonstrate via targeted additional experiments and SAXS measurements, that the packing structure of the layers is mainly driven by the formation of aggregates and their subsequent packing, and not by the competition between Brownian diffusion and convection. This highlights that a second dimensionless ratio in addition to the Peclet number should be taken into account, namely the aggregation over evaporation timescale.
- Open Access
Controlling crackling dynamics by triggering low intensity avalanches
We examine the effect of small, spatially localized, excitations applied periodically in different manners, on the crackling dynamics of a brittle crack driven slowly in a heterogeneous solid. When properly adjusted, these excitations are observed to radically modify avalanche statistics and considerably limit the magnitude of the largest events. Surprisingly, this does not require information on the front loading state at the time of excitation; applying it either at a random location or at the most loaded point gives the same results. Subsequently, we unravel how the excitation amplitude, spatial extent and frequency govern the effect. We find that the excitation efficiency is ruled by a single reduced parameter, namely the injected power per unit front length; the suppression of extreme avalanches is maximum at a well-defined optimal value of this control parameter. This analysis opens a new way to control largest events in crackling dynamics. Beyond fracture problems, it may be relevant for crackling systems described by models of the same universality class, such as the wetting of heterogeneous substrates or magnetic walls in amorphous magnets.
Open AccessControlling crackling dynamics by triggering low intensity avalanches
We examine the effect of small, spatially localized, excitations applied periodically in different manners, on the crackling dynamics of a brittle crack driven slowly in a heterogeneous solid. When properly adjusted, these excitations are observed to radically modify avalanche statistics and considerably limit the magnitude of the largest events. Surprisingly, this does not require information on the front loading state at the time of excitation; applying it either at a random location or at the most loaded point gives the same results. Subsequently, we unravel how the excitation amplitude, spatial extent and frequency govern the effect. We find that the excitation efficiency is ruled by a single reduced parameter, namely the injected power per unit front length; the suppression of extreme avalanches is maximum at a well-defined optimal value of this control parameter. This analysis opens a new way to control largest events in crackling dynamics. Beyond fracture problems, it may be relevant for crackling systems described by models of the same universality class, such as the wetting of heterogeneous substrates or magnetic walls in amorphous magnets.