Ryoichi Ishihara
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ryoichi Ishihara has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Kees Beenakker
Delft Univ. of Technology (Netherlands)
4 shared publications - H. Schellevis
Delft Univ. of Technology (Netherlands)
2 shared publications Ming He
Delft Univ. of Technology (Netherlands)
2 shared publicationsSatoshi Inoue
2 shared publicationsWim Metselaar
2 shared publicationsAlessandro Baiano
1 shared publication
Latest Publications
- 10 February 2011
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7956, 795605
Single-grain Si TFTs for high-speed flexible electronics
Existent flat-panel display is mechanically stiff because it requires external connection of IC chips. At its present stage, displays with a-Si, metal oxide semiconductor or organic TFTs require still external connection of data driver and controllers, because of their low carrier mobilities. We will review our recent progress on direct formation of high speed Si circuits fabricated with a plastic compatible temperature. Large Si grains with a diameter of 4 microns were formed on predetermined positions by a pulsed laser crystallization process with a plastic compatible temperature. High performance transistors were fabricated inside a single Si grain.
- 10 February 2011
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7956, 795605
Single-grain Si TFTs for high-speed flexible electronics
Existent flat-panel display is mechanically stiff because it requires external connection of IC chips. At its present stage, displays with a-Si, metal oxide semiconductor or organic TFTs require still external connection of data driver and controllers, because of their low carrier mobilities. We will review our recent progress on direct formation of high speed Si circuits fabricated with a plastic compatible temperature. Large Si grains with a diameter of 4 microns were formed on predetermined positions by a pulsed laser crystallization process with a plastic compatible temperature. High performance transistors were fabricated inside a single Si grain.
- 24 June 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 43 (7) , 1563-1576
An Assessment of µ-Czochralski, Single-Grain Silicon Thin-Film Transistor Technology for Large-Area, Sensor and 3-D Electronic Integration
Single-grain (SG) thin-film transistors (TFTs) fabricated inside location-controlled silicon grains using the mu-Czochralski method are benchmarked for analog and RF applications. Each silicon grain is defined by excimer laser recrystallization of polysilicon. Thin-film transistors may be fabricated in this manner on silicon or low-cost flexible plastic substrates as processing temperatures remain below 350degC, making the SG-TFT a potential enabling technology for large-area highly integrated electronic systems or systems-in-package with low manufacturing cost. Operational amplifier and voltage reference circuits of varying complexity were designed and measured in order to evaluate the effects of channel position and processing variation on analog circuits. A two-stage telescopic cascode operational amplifier fabricated in an experimental 1.5 mum SG-TFT technology demonstrates a DC gain of 55 dB (unity-gain bandwidth of 6.3 MHz), while a prototype CMOS voltage reference with a power supply rejection ratio (PSRR) of 50 dB is also demonstrated. With f T comparable to single-crystal MOSFETs of comparable gate length, the SG-TFT can also enable RF circuits for wireless applications. A 12 dB gain RF cascode amplifier with on-chip inductors and operating in the 433 MHz ISM band is demonstrated. Excellent agreement with simulations is attained using a modified BSIM-SOI model extracted from measurements of experimental SG-TFT devices.
- 24 June 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 43 (7) , 1563-1576
An Assessment of µ-Czochralski, Single-Grain Silicon Thin-Film Transistor Technology for Large-Area, Sensor and 3-D Electronic Integration
Single-grain (SG) thin-film transistors (TFTs) fabricated inside location-controlled silicon grains using the mu-Czochralski method are benchmarked for analog and RF applications. Each silicon grain is defined by excimer laser recrystallization of polysilicon. Thin-film transistors may be fabricated in this manner on silicon or low-cost flexible plastic substrates as processing temperatures remain below 350degC, making the SG-TFT a potential enabling technology for large-area highly integrated electronic systems or systems-in-package with low manufacturing cost. Operational amplifier and voltage reference circuits of varying complexity were designed and measured in order to evaluate the effects of channel position and processing variation on analog circuits. A two-stage telescopic cascode operational amplifier fabricated in an experimental 1.5 mum SG-TFT technology demonstrates a DC gain of 55 dB (unity-gain bandwidth of 6.3 MHz), while a prototype CMOS voltage reference with a power supply rejection ratio (PSRR) of 50 dB is also demonstrated. With f T comparable to single-crystal MOSFETs of comparable gate length, the SG-TFT can also enable RF circuits for wireless applications. A 12 dB gain RF cascode amplifier with on-chip inductors and operating in the 433 MHz ISM band is demonstrated. Excellent agreement with simulations is attained using a modified BSIM-SOI model extracted from measurements of experimental SG-TFT devices.
- 26 December 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 54 (1) , 124-130
Single-Grain Si TFTs and Circuits Inside Location-Controlled Grains Fabricated Using a Capping Layer of $\hbox{SiO}_{2}$To enlarge the size of two-dimensional location-controlled Si grains fabricated in the mu-Czochralski process in excimer-laser crystallization, a capping layer (C/L) of SiO 2 was applied to the amorphous-Si (a-Si) thin film. With a 50-nm-thick SiO 2 C/L on a 100-nm-thick a-Si film, the diameter of the location-controlled grain was increased to 7.5 mum. Single-grain Si thin-film transistors (TFTs) were fabricated with the SiO 2 C/L as part of the gate insulator. Field-effect mobilities of 510 and 210 cm 2 /Vmiddots were obtained for electrons and holes, respectively. Both TFTs were integrated in a single-grain CMOS inverter inside a location-controlled grain. The propagation gate delay was found to be shorter than that in poly-Si circuits under the same device conditions
- 26 December 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 54 (1) , 124-130
Single-Grain Si TFTs and Circuits Inside Location-Controlled Grains Fabricated Using a Capping Layer of $\hbox{SiO}_{2}$To enlarge the size of two-dimensional location-controlled Si grains fabricated in the mu-Czochralski process in excimer-laser crystallization, a capping layer (C/L) of SiO 2 was applied to the amorphous-Si (a-Si) thin film. With a 50-nm-thick SiO 2 C/L on a 100-nm-thick a-Si film, the diameter of the location-controlled grain was increased to 7.5 mum. Single-grain Si thin-film transistors (TFTs) were fabricated with the SiO 2 C/L as part of the gate insulator. Field-effect mobilities of 510 and 210 cm 2 /Vmiddots were obtained for electrons and holes, respectively. Both TFTs were integrated in a single-grain CMOS inverter inside a location-controlled grain. The propagation gate delay was found to be shorter than that in poly-Si circuits under the same device conditions
- 15 October 2006
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 100 (8) , 083103
⟨100⟩-textured self-assembled square-shaped polycrystalline silicon grains by multiple shot excimer laser crystallization
Strong preference for ⟨100⟩ surface and in-plane orientations has been observed in polycrystalline silicon film on after crystallization with multiple excimer laser pulses. Laser induced periodic surface structure (LIPSS) is developed in the film, constructing self-assembled square-shaped grains. The clear texture can be observed in a relatively wide energy density window, from , for a thick layer. It is speculated that the lateral growth velocity of ⟨100⟩-oriented grains is the fastest, and the orthogonal in-plane ⟨100⟩ directions are developed due to the alternate directions of melting and solidification during the LIPSS formation.- 15 October 2006
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 100 (8) , 083103
⟨100⟩-textured self-assembled square-shaped polycrystalline silicon grains by multiple shot excimer laser crystallization
Strong preference for ⟨100⟩ surface and in-plane orientations has been observed in polycrystalline silicon film on after crystallization with multiple excimer laser pulses. Laser induced periodic surface structure (LIPSS) is developed in the film, constructing self-assembled square-shaped grains. The clear texture can be observed in a relatively wide energy density window, from , for a thick layer. It is speculated that the lateral growth velocity of ⟨100⟩-oriented grains is the fastest, and the orthogonal in-plane ⟨100⟩ directions are developed due to the alternate directions of melting and solidification during the LIPSS formation.- 1 January 2006
- Published by Springer Nature in MRS Proceedings
- Vol. 910
Defect States in Excimer-Laser Crystallized Single-Grain TFTs Studied with Isothermal Charge Deep-level Transient Spectroscopy
- 1 January 2006
- Published by Springer Nature in MRS Proceedings
- Vol. 910
Defect States in Excimer-Laser Crystallized Single-Grain TFTs Studied with Isothermal Charge Deep-level Transient Spectroscopy
- 1 January 2006
- Published by Springer Nature in MRS Proceedings
- Vol. 910
Preparation of Large, Location-Controlled SI Grains by Excimer Laser Crystallization of α-SI FILM SPUTTERED AT 100°C
- 1 January 2006
- Published by Springer Nature in MRS Proceedings
- Vol. 910
Preparation of Large, Location-Controlled SI Grains by Excimer Laser Crystallization of α-SI FILM SPUTTERED AT 100°C
- 1 September 2005
- Published by Elsevier in Thin Solid Films
- Vol. 487 (1-2) , 97-101
Electrical property of coincidence site lattice grain boundary in location-controlled Si island by excimer-laser crystallization
- 1 September 2005
- Published by Elsevier in Thin Solid Films
- Vol. 487 (1-2) , 97-101
Electrical property of coincidence site lattice grain boundary in location-controlled Si island by excimer-laser crystallization