Klaus Petermann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Klaus Petermann has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Guenter Huber
Institut für Laser-Physik, Universität Hamburg, Luruper Chaussee 149, 22761 Hamburg, Germany
7 shared publications G. Huber
3 shared publicationsJ. Johannsen
Inst. fur Laser-Phys., Hamburg Univ., Germany
3 shared publications- M. Mond
Institut für Laser‐Physik, Universität Hamburg, Jungiusstraße 9a, D‐20355 Hamburg, Germany
3 shared publications R. Peters
Univ. Hamburg (Germany)
2 shared publicationsA. Hinz
Carl Zeiss Jena GmbH, 73447 Oberkochen, Germany
1 shared publication
Latest Publications
- 10 February 2011
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7912, 79120L-79120
Yb-doped ultrafast thin disk lasers
Ultrafast thin disk lasers achieve higher pulse energies and average power levels than any other modelocked oscillators. The key components of SESAM modelocked thin disk lasers are used in reflection, which is an advantage for the generation of ultrashort pulses with excellent temporal, spectral and spatial properties. We review the development and report latest results. We report on successful scaling of a Yb:Lu2O3 thin disk laser to 141 W average power, setting a new record for mode-locked laser oscillators. Such performance is important for a growing number of applications such as material processing or driving experiments in high field science.
- 10 February 2011
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7912, 79120L-79120
Yb-doped ultrafast thin disk lasers
Ultrafast thin disk lasers achieve higher pulse energies and average power levels than any other modelocked oscillators. The key components of SESAM modelocked thin disk lasers are used in reflection, which is an advantage for the generation of ultrashort pulses with excellent temporal, spectral and spatial properties. We review the development and report latest results. We report on successful scaling of a Yb:Lu2O3 thin disk laser to 141 W average power, setting a new record for mode-locked laser oscillators. Such performance is important for a growing number of applications such as material processing or driving experiments in high field science.
- 22 October 2010
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 27 (11) , B93-B105
Solid-state lasers: status and future [Invited]
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
- 22 October 2010
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 27 (11) , B93-B105
Solid-state lasers: status and future [Invited]
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
- 25 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 49
Yb:NaGd(WO/sub 4/)/sub 2/: spectroscopic characterisation and laser demonstration
Here, Yb:NaGd(WO/sub 4/)/sub 2/ (Yb:NGW) is presented, which - in contrast to the potassium tungstates - can be grown by the Czochralski-technique and exhibits even larger Yb-Yb-distances. The effect of radiation trapping is largely excluded due to the used experimental technique, i.e. the so-called pinhole-method. Furthermore, Yb:NGW has been tested in first laser experiments. Under titanium sapphire laser pumping, a slope efficiency of 36% and a maximum output power of nearly 200 mW were achieved. Using a diode laser at a wavelength of 975 nm a slope efficiency of 20% and a maximum output power of 230 mW were obtained.
- 25 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 49
Yb:NaGd(WO/sub 4/)/sub 2/: spectroscopic characterisation and laser demonstration
Here, Yb:NaGd(WO/sub 4/)/sub 2/ (Yb:NGW) is presented, which - in contrast to the potassium tungstates - can be grown by the Czochralski-technique and exhibits even larger Yb-Yb-distances. The effect of radiation trapping is largely excluded due to the used experimental technique, i.e. the so-called pinhole-method. Furthermore, Yb:NGW has been tested in first laser experiments. Under titanium sapphire laser pumping, a slope efficiency of 36% and a maximum output power of nearly 200 mW were achieved. Using a diode laser at a wavelength of 975 nm a slope efficiency of 20% and a maximum output power of 230 mW were obtained.
- 25 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 285
Site-selective spectroscopy of Yb/sup 3+/ :LaSc/sub 3/(BO/sub 3/)/sub 4/
In recent years, ytterbium-doped materials have reached great interest for high power lasers, especially in the thin-disk laser setup. The main advantage of ytterbium compared to neodymium is the low quantum defect between pump and laser wavelength, the absence of upconversion processes (only cooperative luminescence) and the possibility of high doping concentration. Thus, ytterbium is the preferred ion for the thin disc laser around 1 /spl mu/m wavelength. Here, Yb/sup 3+/:LaSc/sub 3/(BO/sub 3/)/sub 4/ is investigated as gain medium for the thin disk-laser.
- 25 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 285
Site-selective spectroscopy of Yb/sup 3+/ :LaSc/sub 3/(BO/sub 3/)/sub 4/
In recent years, ytterbium-doped materials have reached great interest for high power lasers, especially in the thin-disk laser setup. The main advantage of ytterbium compared to neodymium is the low quantum defect between pump and laser wavelength, the absence of upconversion processes (only cooperative luminescence) and the possibility of high doping concentration. Thus, ytterbium is the preferred ion for the thin disc laser around 1 /spl mu/m wavelength. Here, Yb/sup 3+/:LaSc/sub 3/(BO/sub 3/)/sub 4/ is investigated as gain medium for the thin disk-laser.
- 1 January 2005
- Published by Optica Publishing Group
- p. 139
Continuous Wave Laser Operation of Yb^3+:YVO_4
An Yb3+:YVO4 laser under Ti:Al2O3 laser pumping and diode laser pumping with a maximum output power of 433 mW at an emission wavelength of 1037 nm is presented. Furthermore Stark-splitting of both multiplets was determined for the first time by analysing absorption and fluorescence at low temperatures. The absorption and emission cross-sections as well as the fluorescence lifetime were determined. The absorption shows a maximum in π-polarization of 6.74×10-20 cm2 with a width of 8 nm. At the laser wavelength the emission cross-section is around 2×10-21 cm2 to 4×10-21 cm2.
- 1 January 2005
- Published by Optica Publishing Group
- p. 139
Continuous Wave Laser Operation of Yb^3+:YVO_4
An Yb3+:YVO4 laser under Ti:Al2O3 laser pumping and diode laser pumping with a maximum output power of 433 mW at an emission wavelength of 1037 nm is presented. Furthermore Stark-splitting of both multiplets was determined for the first time by analysing absorption and fluorescence at low temperatures. The absorption and emission cross-sections as well as the fluorescence lifetime were determined. The absorption shows a maximum in π-polarization of 6.74×10-20 cm2 with a width of 8 nm. At the laser wavelength the emission cross-section is around 2×10-21 cm2 to 4×10-21 cm2.
- 1 January 2001
- Published by Optica Publishing Group
- p. MC6
Efficient Laser Operation of Nd:Sc2O3 at 966 nm, 1082nm and 1486nm
Efficient laser operation was realized in Nd:ScLiNbO2OLiNbO3 at 966nm (η=43%), 1082nm (η=58%), and 1486nm (η=24%) with 1200mW of absorbed pump from a Ti:Al2O3 laser. Absorption, emission and excited state absorption cross sections were measured. Peak cross sections are σabs= 7.1 10-20cm2 at 825nm in absorption, and σSE= 1.9 10-20cm2 at 966nm, σSE= 8.2 10-20cm2 at 1082nm, and σSE= 5.5 10-20cm2 at 1367nm in emission. It is supposed that lasing on the strong emission line at 1367nm is prevented by excited state absorption.
- 1 January 2001
- Published by Optica Publishing Group
- p. MC6
Efficient Laser Operation of Nd:Sc2O3 at 966 nm, 1082nm and 1486nm
Efficient laser operation was realized in Nd:ScLiNbO2OLiNbO3 at 966nm (η=43%), 1082nm (η=58%), and 1486nm (η=24%) with 1200mW of absorbed pump from a Ti:Al2O3 laser. Absorption, emission and excited state absorption cross sections were measured. Peak cross sections are σabs= 7.1 10-20cm2 at 825nm in absorption, and σSE= 1.9 10-20cm2 at 966nm, σSE= 8.2 10-20cm2 at 1082nm, and σSE= 5.5 10-20cm2 at 1367nm in emission. It is supposed that lasing on the strong emission line at 1367nm is prevented by excited state absorption.
- 1 January 2000
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1 pp.
Demonstration of a coupled-cavity Nd:YVO/sub 4//Nd:YAG laser
Summary form only given. The goal of our experiment was to enhance the output power of an end pumped Nd:YVO/sub 4/ microchip laser without decreasing the beam characteristics by placing a Nd:YAG crystal behind it and adding an external output mirror. This resulted in a coupling of the microchip resonator with the external resonator including the Nd:YAG crystal. The idea behind this simple setup was to achieve lasing with the Nd:YVO/sub 4/ acting as the master oscillator and the Nd:YAG as the power amplifier. Ideally, this should result in polarized, single longitudinal and transverse mode operation at higher output powers than the microchip on its own.
- 1 January 2000
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1 pp.
Demonstration of a coupled-cavity Nd:YVO/sub 4//Nd:YAG laser
Summary form only given. The goal of our experiment was to enhance the output power of an end pumped Nd:YVO/sub 4/ microchip laser without decreasing the beam characteristics by placing a Nd:YAG crystal behind it and adding an external output mirror. This resulted in a coupling of the microchip resonator with the external resonator including the Nd:YAG crystal. The idea behind this simple setup was to achieve lasing with the Nd:YVO/sub 4/ acting as the master oscillator and the Nd:YAG as the power amplifier. Ideally, this should result in polarized, single longitudinal and transverse mode operation at higher output powers than the microchip on its own.
- 30 June 1997
- Published by Elsevier in Journal of Luminescence
- Vol. 72-74, 826-828
Crystal growth, spectroscopic and laser characterization of Nd: CSB crystals
- 30 June 1997
- Published by Elsevier in Journal of Luminescence
- Vol. 72-74, 826-828
Crystal growth, spectroscopic and laser characterization of Nd: CSB crystals
- 1 January 1996
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 237
optical Properties of Trivalent Manganese-Doped Oxide Crystals
- 1 January 1996
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 237
optical Properties of Trivalent Manganese-Doped Oxide Crystals
- 24 March 1989
- Published by SPIE-Intl Soc Optical Eng
- Vol. 1021, 69-74
Efficient Flashlamp Pumped Cr,Nd:YSAG Laser
We report on the new 1.06 micron laser material Cr3+,Nd3+:Y3(ScxAl2-x)Al3012(Cr,Nd:YSAG). To find a congruent melting composition for this mixed garnet, boules were grown with Sc concentrations between x=0.9 and x=1.6. With rods prepared from these Cr-sensitized Nd-crystals flashlamp pumped laser experiments have been performed. Until now slope efficiencies up to 6.4% are obtained at a repetition rate of 10 Hz.
- 24 March 1989
- Published by SPIE-Intl Soc Optical Eng
- Vol. 1021, 69-74
Efficient Flashlamp Pumped Cr,Nd:YSAG Laser
We report on the new 1.06 micron laser material Cr3+,Nd3+:Y3(ScxAl2-x)Al3012(Cr,Nd:YSAG). To find a congruent melting composition for this mixed garnet, boules were grown with Sc concentrations between x=0.9 and x=1.6. With rods prepared from these Cr-sensitized Nd-crystals flashlamp pumped laser experiments have been performed. Until now slope efficiencies up to 6.4% are obtained at a repetition rate of 10 Hz.