Samir M. Aouadi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Samir M. Aouadi has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
P. Kohli
Department of Chemistry and Biochemistry, Southern Illinois University Carbondale, Carbondale, USA
3 shared publicationsB. Sirota
Department of Physics, Southern Illinois University Carbondale, Carbondale, USA
2 shared publications- Kyriaki Polychronopoulou
Department of Mechanical Engineering, Khalifa University of Science and Technology, Abu Dhabi P.O. Box 127788, United Arab Emirates
2 shared publications A. H. Church
1 shared publicationAndrey A. Voevodin
Materials and Manufacturing Directorate, Wright-Patterson Air Force Base
1 shared publicationBrandon Luster
Southern Illinois University
1 shared publication
Latest Publications
- 24 December 2013
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 16 (1) , 1-11
Hierarchical structures produced using unbalanced magnetron sputtering for photocatalytic degradation of Rhodamine 6G dye
- 24 December 2013
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 16 (1) , 1-11
Hierarchical structures produced using unbalanced magnetron sputtering for photocatalytic degradation of Rhodamine 6G dye
- 1 January 2012
- Published by American Scientific Publishers in Advanced Science Letters
- Vol. 5 (1) , 188-191
Carbon Nanotube-Based Adaptive Solid Lubricant Composites
- 1 January 2012
- Published by American Scientific Publishers in Advanced Science Letters
- Vol. 5 (1) , 188-191
Carbon Nanotube-Based Adaptive Solid Lubricant Composites
- Open Access
- 19 July 2010
- Published by IOP Publishing in Nanotechnology
- Vol. 21 (32) , 325601
Room temperature synthesis and high temperature frictional study of silver vanadate nanorods
We report the room temperature (RT) synthesis of silver vanadate nanorods (consisting of mainly β-AgV O3) by a simple wet chemical route and their frictional study at high temperatures (HT). The sudden mixing of ammonium vanadate with silver nitrate solution under constant magnetic stirring resulted in a pale yellow coloured precipitate. Structural/microstructural characterization of the precipitate through x-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed the high yield and homogeneous formation of silver vanadate nanorods. The length of the nanorods was 20–40 µm and the thickness 100–600 nm. The pH variation with respect to time was thoroughly studied to understand the formation mechanism of the silver vanadate nanorods. This synthesis process neither demands HT, surfactants nor long reaction time. The silver vanadate nanomaterial showed good lubrication behaviour at HT (700 °C) and the friction coefficient was between 0.2 and 0.3. HT-XRD revealed that AgV O3 completely transformed into silver vanadium oxide (Ag2V4O11) and silver with an increase in temperature from RT to 700 °C.
- 19 July 2010
- Published by IOP Publishing in Nanotechnology
- Vol. 21 (32) , 325601
Open AccessRoom temperature synthesis and high temperature frictional study of silver vanadate nanorods
We report the room temperature (RT) synthesis of silver vanadate nanorods (consisting of mainly β-AgV O3) by a simple wet chemical route and their frictional study at high temperatures (HT). The sudden mixing of ammonium vanadate with silver nitrate solution under constant magnetic stirring resulted in a pale yellow coloured precipitate. Structural/microstructural characterization of the precipitate through x-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed the high yield and homogeneous formation of silver vanadate nanorods. The length of the nanorods was 20–40 µm and the thickness 100–600 nm. The pH variation with respect to time was thoroughly studied to understand the formation mechanism of the silver vanadate nanorods. This synthesis process neither demands HT, surfactants nor long reaction time. The silver vanadate nanomaterial showed good lubrication behaviour at HT (700 °C) and the friction coefficient was between 0.2 and 0.3. HT-XRD revealed that AgV O3 completely transformed into silver vanadium oxide (Ag2V4O11) and silver with an increase in temperature from RT to 700 °C.
- 20 December 2007
- Published by Springer Nature in Tribology Letters
- Vol. 29 (2) , 95-103
Adaptive Mo2N/MoS2/Ag Tribological Nanocomposite Coatings for Aerospace Applications
- 20 December 2007
- Published by Springer Nature in Tribology Letters
- Vol. 29 (2) , 95-103
Adaptive Mo2N/MoS2/Ag Tribological Nanocomposite Coatings for Aerospace Applications
- 8 August 2007
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 84A (4) , 1061-1067
Mechanical, tribological, and biocompatibility properties of ZrN‐Ag nanocomposite films
Nanocomposite films of ZrN‐Ag were produced by reactive unbalanced magnetron sputtering, and their structural, chemical, mechanical, tribological, haemocompatibility, and antibacterial properties were studied as a function of film composition. The films formed a dense and homogeneous microstructure whereby nanocrystals of Ag are distributed evenly throughout the ZrN matrix. For small additions of silver, the hardness was found to increase, whereas the elastic modulus was found to decrease drastically. In the process of optimizing the deposition conditions, three kinds of coatings were prepared on 316 L surgical steel and tested by accelerated electrochemical polarization tests in order to detect the influence of Ag and the value of the bias potential on the corrosion performance of the system. Films produced under the optimum deposition conditions were, subsequently, deposited on medical grade Ti‐Al‐V and worn against ball‐bearing steel using a ball‐on‐disk tribotester in bovine serum and were found to have superior tribological properties compared with single‐phase ZrN coatings. The haemocompatibility of the films was assessed by investigating the adsorption of human serum albumin and fibrinogen on samples with different phase compositions. Quantification of the protein adsorption was carried out using spectroscopic ellipsometry, which confirmed the haemocompatibility of the films. Antibiotic activity of the films was quantified by incubating the films in bacterial cultures, namely, Staphylococcus epidermis, Staphylococcus aureus, and Escherichia coli. Films with a silver content > 10% exhibited superior antibacterial activity compared with the uncoated samples. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2008
- 8 August 2007
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 84A (4) , 1061-1067
Mechanical, tribological, and biocompatibility properties of ZrN‐Ag nanocomposite films
Nanocomposite films of ZrN‐Ag were produced by reactive unbalanced magnetron sputtering, and their structural, chemical, mechanical, tribological, haemocompatibility, and antibacterial properties were studied as a function of film composition. The films formed a dense and homogeneous microstructure whereby nanocrystals of Ag are distributed evenly throughout the ZrN matrix. For small additions of silver, the hardness was found to increase, whereas the elastic modulus was found to decrease drastically. In the process of optimizing the deposition conditions, three kinds of coatings were prepared on 316 L surgical steel and tested by accelerated electrochemical polarization tests in order to detect the influence of Ag and the value of the bias potential on the corrosion performance of the system. Films produced under the optimum deposition conditions were, subsequently, deposited on medical grade Ti‐Al‐V and worn against ball‐bearing steel using a ball‐on‐disk tribotester in bovine serum and were found to have superior tribological properties compared with single‐phase ZrN coatings. The haemocompatibility of the films was assessed by investigating the adsorption of human serum albumin and fibrinogen on samples with different phase compositions. Quantification of the protein adsorption was carried out using spectroscopic ellipsometry, which confirmed the haemocompatibility of the films. Antibiotic activity of the films was quantified by incubating the films in bacterial cultures, namely, Staphylococcus epidermis, Staphylococcus aureus, and Escherichia coli. Films with a silver content > 10% exhibited superior antibacterial activity compared with the uncoated samples. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2008
- 21 March 2004
- Published by Elsevier in Applied Surface Science
- Vol. 229 (1-4) , 387-394
Characterization of titanium chromium nitride nanocomposite protective coatings
- 21 March 2004
- Published by Elsevier in Applied Surface Science
- Vol. 229 (1-4) , 387-394
Characterization of titanium chromium nitride nanocomposite protective coatings
- 4 November 2003
- Published by Elsevier in Thin Solid Films
- Vol. 445 (1) , 96-104
Physical and mechanical properties of reactively sputtered chromium boron nitride thin films
- 4 November 2003
- Published by Elsevier in Thin Solid Films
- Vol. 445 (1) , 96-104
Physical and mechanical properties of reactively sputtered chromium boron nitride thin films