Gauri S. Mittal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gauri S. Mittal has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
L.R. Correia
Department of Agricultural Engineering , Technical University of Nova Scotia , Halifax, Nova Scotia, Canada
3 shared publications- Otman Basir
Department of Electrical and Computer Engineering, University of Waterloo, 200 University Avenue West, Waterloo, ON N2L 3G1, Canada
3 shared publications B. Zhao
Department of Systems Design Engineering, University of Waterloo, Waterloo, Ont., Canada N2L 3G1
2 shared publicationsJixian Zhang
School of Engineering, University of Guelph , Guelph , Ontario , Canada
2 shared publicationsM.W. Griffiths
2 shared publicationsA.M. Hodgins
1 shared publication
Latest Publications
- Open Access
- 18 August 2013
- Published by Taylor & Francis in International Journal of Food Properties
- Vol. 16 (6) , 1211-1221
Prediction of Equilibrium Moisture Content of Various Foods Using a Neural Network
A neural network was developed for learning the isotherm data and determined the relationship of equilibrium moisture content and relative humidity at various temperatures and for different food products. Data were taken from the literature for 53 food products. Neural network inputs were temperature, relative humidity or water activity, and food product number (1–53) or six binary elements (000001 to 110101) to express these food products. Food product input in binary numbers provided much better accuracy than using numerical numbers. The optimum neural network structure was three middle layers with 30 nodes in each layer with 0.9 values of both learning rate and momentum. The mean relative error was only 2%.
- 18 August 2013
- Published by Taylor & Francis in International Journal of Food Properties
- Vol. 16 (6) , 1211-1221
Open AccessPrediction of Equilibrium Moisture Content of Various Foods Using a Neural Network
A neural network was developed for learning the isotherm data and determined the relationship of equilibrium moisture content and relative humidity at various temperatures and for different food products. Data were taken from the literature for 53 food products. Neural network inputs were temperature, relative humidity or water activity, and food product number (1–53) or six binary elements (000001 to 110101) to express these food products. Food product input in binary numbers provided much better accuracy than using numerical numbers. The optimum neural network structure was three middle layers with 30 nodes in each layer with 0.9 values of both learning rate and momentum. The mean relative error was only 2%.
- 1 January 2012
- Published by Springer Nature
- p. 69-74
A Hierarchical Reinforcement Learning Based Approach for Multi-robot Cooperation in Unknown Environments
- 1 January 2012
- Published by Springer Nature
- p. 69-74
A Hierarchical Reinforcement Learning Based Approach for Multi-robot Cooperation in Unknown Environments
- Open Access
- 1 February 2009
- Published by Wiley in Journal of Food Process Engineering
- Vol. 32 (1) , 126-143
TEXTURAL CHARACTERISTICS OF FIVE MICROORGANISMS FOR RAPID DETECTION USING IMAGE PROCESSING
- 1 February 2009
- Published by Wiley in Journal of Food Process Engineering
- Vol. 32 (1) , 126-143
Open AccessTEXTURAL CHARACTERISTICS OF FIVE MICROORGANISMS FOR RAPID DETECTION USING IMAGE PROCESSING
- 30 July 2008
- Published by Springer Nature in Food and Bioprocess Technology
- Vol. 3 (5) , 741-751
Rapid Detection of Microorganisms Using Image Processing Parameters and Neural Network
- 30 July 2008
- Published by Springer Nature in Food and Bioprocess Technology
- Vol. 3 (5) , 741-751
Rapid Detection of Microorganisms Using Image Processing Parameters and Neural Network
- 30 May 2008
- Published by Taylor & Francis in Food Reviews International
- Vol. 24 (3) , 330-351
Effects of High-Pressure Processing (HPP) on Bacterial Spores: An Overview
High pressure processing (HPP) at high temperatures has been investigated to inactivate bacterial spores. By improving HPP using cyclic/oscillatory/pulsed pressure applications or combination with other treatments (such as thermal), and agents (such as antibacterial), bacterial spores can be inactivated, resulting in shelf-stable foods with natural sensory, quality, and nutritional attributes. This paper reviews literature on the recent advances in inactivation of bacterial spores by HPP, including its combination with high temperature, and oscillatory processing. The mechanisms of HPP-induced bacterial spore germination and inactivation are also discussed.
- 30 May 2008
- Published by Taylor & Francis in Food Reviews International
- Vol. 24 (3) , 330-351
Effects of High-Pressure Processing (HPP) on Bacterial Spores: An Overview
High pressure processing (HPP) at high temperatures has been investigated to inactivate bacterial spores. By improving HPP using cyclic/oscillatory/pulsed pressure applications or combination with other treatments (such as thermal), and agents (such as antibacterial), bacterial spores can be inactivated, resulting in shelf-stable foods with natural sensory, quality, and nutritional attributes. This paper reviews literature on the recent advances in inactivation of bacterial spores by HPP, including its combination with high temperature, and oscillatory processing. The mechanisms of HPP-induced bacterial spore germination and inactivation are also discussed.
- 31 July 2007
- Published by Elsevier in Food Research International
- Vol. 40 (6) , 742-747
Measures of similarity and detection of miniature foreign bodies in packaged foods
- 31 July 2007
- Published by Elsevier in Food Research International
- Vol. 40 (6) , 742-747
Measures of similarity and detection of miniature foreign bodies in packaged foods
- 7 June 2007
- Published by Wiley in Journal of Food Process Engineering
- Vol. 30 (3) , 393-405
MAXIMUM COMPONENTS INTEGRATION FOR IMAGE PROCESSING: AN APPLICATION OF ULTRASOUND FOR DETECTION OF SMALL OBJECTS IN CONTAINERS
Detection of small objects, those that lie on the bottom or stick to the wall of containers, constitutes a challenging issue for ultrasonic detection techniques. This is because echo signals from the object are fused with that of the inner surface of the container when subjected to ultrasound scanning. This study proposes a maximum component integration method based on the short‐time Fourier transform algorithm to detect these objects. Experiments were conducted using glass fragments of about 2 × 2 × 2 mm3 to test the proposed method. Compared with other signal‐processing methods (statistical calculations, backscattered amplitude integral and maximum frequency calculation), this method is able to make selective and full use of multiecho information, and hence demonstrated to have improved detection ability to the extent that it can detect small glass fragments contained inside glass containers. Principles are introduced for choosing the optimized WINDOW size and signal size to be processed when applying this method.
- 7 June 2007
- Published by Wiley in Journal of Food Process Engineering
- Vol. 30 (3) , 393-405
MAXIMUM COMPONENTS INTEGRATION FOR IMAGE PROCESSING: AN APPLICATION OF ULTRASOUND FOR DETECTION OF SMALL OBJECTS IN CONTAINERS
Detection of small objects, those that lie on the bottom or stick to the wall of containers, constitutes a challenging issue for ultrasonic detection techniques. This is because echo signals from the object are fused with that of the inner surface of the container when subjected to ultrasound scanning. This study proposes a maximum component integration method based on the short‐time Fourier transform algorithm to detect these objects. Experiments were conducted using glass fragments of about 2 × 2 × 2 mm3 to test the proposed method. Compared with other signal‐processing methods (statistical calculations, backscattered amplitude integral and maximum frequency calculation), this method is able to make selective and full use of multiecho information, and hence demonstrated to have improved detection ability to the extent that it can detect small glass fragments contained inside glass containers. Principles are introduced for choosing the optimized WINDOW size and signal size to be processed when applying this method.
- Open Access
- 1 July 2006
- Published by Taylor & Francis in International Journal of Food Properties
- Vol. 9 (2) , 273-285
Feasibility of the Acoustic/EMG System for the Analysis of Instrumental Food Texture
Acoustic/EMG system is presented to better measure the human perception of food texture through the use of sensory systems that monitor the mastication process. The sound transducer and EMG electrode system provide the means by which to measure the oral tactile sensation experienced by both masseter muscles and the auditory signals produced during mastication. Human testing was successfully preformed and signal data was recorded from both the EMG and acoustic sensors. The auditory signals, experienced by the subject during mastication, were recorded by a microphone placed in the ear. Maximum signal, total accumulative power and slope of accumulative power were extracted from the data and strong trends were seen, which corresponded to expected food texture within food groups. These parameters were able to distinguish between all products and similar trends were seen between EMG and acoustic results. The use of an acoustic sensor has the potential to drastically reduce commercial design costs and simplify data interpretation.
- 1 July 2006
- Published by Taylor & Francis in International Journal of Food Properties
- Vol. 9 (2) , 273-285
Open AccessFeasibility of the Acoustic/EMG System for the Analysis of Instrumental Food Texture
Acoustic/EMG system is presented to better measure the human perception of food texture through the use of sensory systems that monitor the mastication process. The sound transducer and EMG electrode system provide the means by which to measure the oral tactile sensation experienced by both masseter muscles and the auditory signals produced during mastication. Human testing was successfully preformed and signal data was recorded from both the EMG and acoustic sensors. The auditory signals, experienced by the subject during mastication, were recorded by a microphone placed in the ear. Maximum signal, total accumulative power and slope of accumulative power were extracted from the data and strong trends were seen, which corresponded to expected food texture within food groups. These parameters were able to distinguish between all products and similar trends were seen between EMG and acoustic results. The use of an acoustic sensor has the potential to drastically reduce commercial design costs and simplify data interpretation.
- 1 June 2006
- Published by Elsevier in Bioresource Technology
- Vol. 97 (9) , 1119-1135
Treatment of wastewater from abattoirs before land application—a review
- 1 June 2006
- Published by Elsevier in Bioresource Technology
- Vol. 97 (9) , 1119-1135
Treatment of wastewater from abattoirs before land application—a review
- 24 May 2006
- Published by Wiley in Packaging Technology and Science
- Vol. 20 (1) , 1-15
Formulation and process conditions for biodegradable/edible soy‐based packaging trays
Food packaging represents a large fraction of municipal solid waste and contributes to the expansion of landfill sites. Commonly used expanded polystyrene packaging trays are difficult to biodegrade. A potential alternative to this product is biodegradable/edible soy‐based packaging trays. Soy‐based tray formulations and fabrications were examined. Mechanical properties from a three‐point flexural test were used as the basis for process/ingredient selection. Soy protein isolate, glycerol and gellan gum or κ‐carrageenan were found suitable. Regression models relating ingredient levels to mechanical properties were obtained and process conditions were optimized. The optimum process conditions for gellan gum‐based trays were a heating temperature of 60°C, a heating time of 1min and a refrigeration setting time of 20min. Copyright © 2006 John Wiley & Sons, Ltd.
- 24 May 2006
- Published by Wiley in Packaging Technology and Science
- Vol. 20 (1) , 1-15
Formulation and process conditions for biodegradable/edible soy‐based packaging trays
Food packaging represents a large fraction of municipal solid waste and contributes to the expansion of landfill sites. Commonly used expanded polystyrene packaging trays are difficult to biodegrade. A potential alternative to this product is biodegradable/edible soy‐based packaging trays. Soy‐based tray formulations and fabrications were examined. Mechanical properties from a three‐point flexural test were used as the basis for process/ingredient selection. Soy protein isolate, glycerol and gellan gum or κ‐carrageenan were found suitable. Regression models relating ingredient levels to mechanical properties were obtained and process conditions were optimized. The optimum process conditions for gellan gum‐based trays were a heating temperature of 60°C, a heating time of 1min and a refrigeration setting time of 20min. Copyright © 2006 John Wiley & Sons, Ltd.