Jian Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jian Zhang has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
Dewei Luo
School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798 Singapore, Singapore
4 shared publicationsHao Yang
School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798 Singapore, Singapore
4 shared publicationsC.W. Xu
School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798, Singapore
3 shared publicationsDingyuan Tang
School of Electrical and Electronic Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore
3 shared publicationsH. Yang
School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798
3 shared publicationsW.D. Tan
School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798, Singapore
3 shared publications
Latest Publications
- Open Access
Seeing is Fixing: Cross-Modal Reasoning with Multimodal LLMs for Visual Software Issue Fixing
Large language model-(LLM) based automated program repair (APR) techniques have shown promising results in resolving real-world GitHub issue tasks. Existing APR systems are primarily evaluated in unimodal settings (e.g., SWE-bench). However, these autonomous systems struggle to resolve multimodal problem scenarios (e.g., SWE-bench M) due to limitations in interpreting and leveraging visual information. In multimodal scenarios, LLMs need to rely on visual information in the graphical user interface (GUI) to understand bugs and generate fixes. To bridge this gap, we propose GUIRepair, a cross-modal reasoning approach for resolving multimodal issue scenarios by understanding and capturing visual information. Specifically, GUIRepair integrates two key components, Image2Code and Code2Image, to enhance fault comprehension and patch validation. Image2Code extracts relevant project documents based on the issue report, then applies this domain knowledge to generate the reproduced code responsible for the visual symptoms, effectively translating GUI images into executable context for better fault comprehension. Code2Image replays the visual issue scenario using the reproduced code and captures GUI renderings of the patched program to assess whether the fix visually resolves the issue, providing feedback for patch validation. We evaluate GUIRepair on SWE-bench M, and the approach demonstrates significant effectiveness. When utilizing GPT-4o as the base model, GUIRepair solves 157 instances, outperforming the best open-source baseline by 26 instances. Furthermore, when using o4-mini as the base model, GUIRepair can achieve even better results and solve 175 instances, outperforming the top commercial system by 22 instances. This emphasizes the success of our new perspective on incorporating cross-modal reasoning by understanding and capturing visual information to resolve multimodal issues.
Open AccessSeeing is Fixing: Cross-Modal Reasoning with Multimodal LLMs for Visual Software Issue Fixing
Large language model-(LLM) based automated program repair (APR) techniques have shown promising results in resolving real-world GitHub issue tasks. Existing APR systems are primarily evaluated in unimodal settings (e.g., SWE-bench). However, these autonomous systems struggle to resolve multimodal problem scenarios (e.g., SWE-bench M) due to limitations in interpreting and leveraging visual information. In multimodal scenarios, LLMs need to rely on visual information in the graphical user interface (GUI) to understand bugs and generate fixes. To bridge this gap, we propose GUIRepair, a cross-modal reasoning approach for resolving multimodal issue scenarios by understanding and capturing visual information. Specifically, GUIRepair integrates two key components, Image2Code and Code2Image, to enhance fault comprehension and patch validation. Image2Code extracts relevant project documents based on the issue report, then applies this domain knowledge to generate the reproduced code responsible for the visual symptoms, effectively translating GUI images into executable context for better fault comprehension. Code2Image replays the visual issue scenario using the reproduced code and captures GUI renderings of the patched program to assess whether the fix visually resolves the issue, providing feedback for patch validation. We evaluate GUIRepair on SWE-bench M, and the approach demonstrates significant effectiveness. When utilizing GPT-4o as the base model, GUIRepair solves 157 instances, outperforming the best open-source baseline by 26 instances. Furthermore, when using o4-mini as the base model, GUIRepair can achieve even better results and solve 175 instances, outperforming the top commercial system by 22 instances. This emphasizes the success of our new perspective on incorporating cross-modal reasoning by understanding and capturing visual information to resolve multimodal issues.
- 2 May 2013
- Published by Wiley in physica status solidi (c)
- Vol. 10 (6) , 967-968
Mode‐locked Yb:LuAG ceramics laser
- 2 May 2013
- Published by Wiley in physica status solidi (c)
- Vol. 10 (6) , 967-968
Mode‐locked Yb:LuAG ceramics laser
- Open Access
- 20 September 2012
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 2 (10) , 1425-1431
Yb:LuAG laser ceramics: a promising high power laser gain medium
Yb:LuAG laser ceramics with different Yb3+ doping concentrations were successfully fabricated by using a solid-state reactive sintering method. SEM graphs demonstrate that the samples have a dense and pore-free microstructure. Based on the spectroscopic studies the ceramics have a large emission cross-section of 2.7 × 10−20 cm2 at 1030 nm emission peak. CW laser operation of the samples has given 7.2 W output power with 65% slope efficiency.
- 20 September 2012
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 2 (10) , 1425-1431
Open AccessYb:LuAG laser ceramics: a promising high power laser gain medium
Yb:LuAG laser ceramics with different Yb3+ doping concentrations were successfully fabricated by using a solid-state reactive sintering method. SEM graphs demonstrate that the samples have a dense and pore-free microstructure. Based on the spectroscopic studies the ceramics have a large emission cross-section of 2.7 × 10−20 cm2 at 1030 nm emission peak. CW laser operation of the samples has given 7.2 W output power with 65% slope efficiency.
- 14 March 2012
- Published by Optica Publishing Group in Optics Letters
- Vol. 37 (6) , 1076-1078
Highly efficient 2 μm Tm:YAG ceramic laser
We have experimentally demonstrated a highly efficient diode-pumped Tm:YAG ceramic laser operating at 2 μm wavelength. The maximum output power of 6.05 W was realized with a slope efficiency as high as 65%. As far as we know, it is the highest slope efficiency reported for Tm:YAG ceramic laser. The wavelength tuning experiment of Tm:YAG ceramic laser was carried out and the results suggest that Tm:YAG ceramic laser could operate simultaneously at multiple wavelengths in a wide range of 1884–2017 nm.
- 14 March 2012
- Published by Optica Publishing Group in Optics Letters
- Vol. 37 (6) , 1076-1078
Highly efficient 2 μm Tm:YAG ceramic laser
We have experimentally demonstrated a highly efficient diode-pumped Tm:YAG ceramic laser operating at 2 μm wavelength. The maximum output power of 6.05 W was realized with a slope efficiency as high as 65%. As far as we know, it is the highest slope efficiency reported for Tm:YAG ceramic laser. The wavelength tuning experiment of Tm:YAG ceramic laser was carried out and the results suggest that Tm:YAG ceramic laser could operate simultaneously at multiple wavelengths in a wide range of 1884–2017 nm.
- 17 January 2012
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 10 (1) , 123-128
Fabrication and Optical Properties of Highly Transparent Er:YAG Polycrystalline Ceramics for Eye‐Safe Solid‐State Lasers“
Highly transparent 1 at.% Er:YAG ceramics was fabricated by a reactive sintering method under vacuum. The optical properties, the microstructure and the laser performance of the Er:YAG ceramics were investigated. The average grain size of the Er:YAG ceramics was 7~8 μm. The in‐line transmittances of the Er:YAG ceramics at the wavelength of 1800 and 400 nm were about 84.6% and 82.4%, respectively. The absorption coefficient of the Er:YAG ceramics was 1.29 cm−1. The grain boundaries were very clean and no secondary phase was observed. When end‐pumped by an Er,Yb‐fiber laser at 1532 nm, a maximum output power of 13.8 W lasing at the wavelength of 1645 nm was obtained with a slope efficiency of 54.5%.
- 17 January 2012
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 10 (1) , 123-128
Fabrication and Optical Properties of Highly Transparent Er:YAG Polycrystalline Ceramics for Eye‐Safe Solid‐State Lasers“
Highly transparent 1 at.% Er:YAG ceramics was fabricated by a reactive sintering method under vacuum. The optical properties, the microstructure and the laser performance of the Er:YAG ceramics were investigated. The average grain size of the Er:YAG ceramics was 7~8 μm. The in‐line transmittances of the Er:YAG ceramics at the wavelength of 1800 and 400 nm were about 84.6% and 82.4%, respectively. The absorption coefficient of the Er:YAG ceramics was 1.29 cm−1. The grain boundaries were very clean and no secondary phase was observed. When end‐pumped by an Er,Yb‐fiber laser at 1532 nm, a maximum output power of 13.8 W lasing at the wavelength of 1645 nm was obtained with a slope efficiency of 54.5%.
- 22 November 2011
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 95 (1) , 52-55
Polycrystalline Ho:YAG Transparent Ceramics for Eye‐Safe Solid State Laser Applications
High optical quality holmium doped yttrium aluminum garnet ( Ho:YAG ) transparent ceramics that contained 0.5–2.0 at.% holmium additives were fabricated by a reactive sintering method under vacuum. Fully dense Ho:YAG ceramics with the average grain size of ~10 μm were obtained after vacuum sintered at 1780°C for 8 h. The in‐line transmittances in the visible and infrared region are higher than 82% and 84%. The absorption coefficients of the 0.8, 1.0, 1.5, and 2.0 at.% Ho:YAG ceramics at 1907 nm was calculated to be 0.72, 0.89, 1.32, and 1.78 cm −1 , respectively. The absorption cross‐section of Ho:YAG ceramic was 0.645 × 10 −20 cm 2 . The 1.5 and 2.0 at.% Ho:YAG ceramic slabs were in‐band pumped by a Tm:fiber laser at 1907 nm. A maximum output power of 20.6 W at 2097 nm was obtained with a corresponding slope efficiency of 60.9%.
- 22 November 2011
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 95 (1) , 52-55
Polycrystalline Ho:YAG Transparent Ceramics for Eye‐Safe Solid State Laser Applications
High optical quality holmium doped yttrium aluminum garnet ( Ho:YAG ) transparent ceramics that contained 0.5–2.0 at.% holmium additives were fabricated by a reactive sintering method under vacuum. Fully dense Ho:YAG ceramics with the average grain size of ~10 μm were obtained after vacuum sintered at 1780°C for 8 h. The in‐line transmittances in the visible and infrared region are higher than 82% and 84%. The absorption coefficients of the 0.8, 1.0, 1.5, and 2.0 at.% Ho:YAG ceramics at 1907 nm was calculated to be 0.72, 0.89, 1.32, and 1.78 cm −1 , respectively. The absorption cross‐section of Ho:YAG ceramic was 0.645 × 10 −20 cm 2 . The 1.5 and 2.0 at.% Ho:YAG ceramic slabs were in‐band pumped by a Tm:fiber laser at 1907 nm. A maximum output power of 20.6 W at 2097 nm was obtained with a corresponding slope efficiency of 60.9%.
- 2 November 2011
- Published by IOP Publishing in Laser Physics Letters
- Vol. 9 (1) , 30-34
Diode pumped highly efficient Yb:Lu3Al5O12 ceramic laser
- 2 November 2011
- Published by IOP Publishing in Laser Physics Letters
- Vol. 9 (1) , 30-34
Diode pumped highly efficient Yb:Lu3Al5O12 ceramic laser
- 28 July 2011
- Published by IOP Publishing in Laser Physics Letters
- Vol. 8 (10) , 719-722
Diode pumped and mode-locked Yb:GdYAG ceramic lasers
- 28 July 2011
- Published by IOP Publishing in Laser Physics Letters
- Vol. 8 (10) , 719-722
Diode pumped and mode-locked Yb:GdYAG ceramic lasers
- 25 January 2011
- Published by IOP Publishing in Laser Physics Letters
- Vol. 8 (3) , 193-196
Room temperature diode-pumped Yb:CaYAlO4 laser with near quantum limit slope efficiency
- 25 January 2011
- Published by IOP Publishing in Laser Physics Letters
- Vol. 8 (3) , 193-196
Room temperature diode-pumped Yb:CaYAlO4 laser with near quantum limit slope efficiency