Tore Hansen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tore Hansen has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Tor E. Kristensen
Department of Chemistry, University of Oslo, P. O. Box 1033 Blindern, 0315 Oslo, Norway, Fax: +47-2285-5441
4 shared publicationsFinn K. Hansen
Department of Chemistry, University of Oslo, P. O. Box 1033 Blindern, 0315 Oslo, Norway, Fax: +47-2285-5441
3 shared publicationsHanne Therese Bonge
Department of Chemistry, University of Oslo, Sem Sælands vei 26, N-0315 Oslo, Norway
2 shared publicationsKristian Vestli
Department of Chemistry, University of Oslo, P. O. Box 1033 Blindern, 0315 Oslo, Norway, Fax: +47-2285-5441
2 shared publicationsMagnus Mortén
Department of Chemistry, University of Oslo, P.O. Box 1033 Blindern, NO-0315 Oslo, Norway
2 shared publicationsMartin Hennum
Department of Chemistry, University of Oslo, P.O. Box 1033 Blindern, NO-0315 Oslo, Norway
2 shared publications
Latest Publications
- Open Access
- 26 July 2016
- Published by Beilstein Institut in Beilstein Journal of Organic Chemistry
- Vol. 12 (1) , 1590-1597
On the cause of low thermal stability of ethyl halodiazoacetates
Rates for the thermal decomposition of ethyl halodiazoacetates (halo = Cl, Br, I) have been obtained, and reported herein are their half-lives. The experimental results are supported by DFT calculations, and we provide a possible explanation for the reduced thermal stability of ethyl halodiazoacetates compared to ethyl diazoacetate and for the relative decomposition rates between the chloro, bromo and iodo analogs. We have also briefly studied the thermal, non-catalytic cyclopropanation of styrenes and compared the results to the analogous Rh(II)-catalyzed reactions.
- 26 July 2016
- Published by Beilstein Institut in Beilstein Journal of Organic Chemistry
- Vol. 12 (1) , 1590-1597
Open AccessOn the cause of low thermal stability of ethyl halodiazoacetates
Rates for the thermal decomposition of ethyl halodiazoacetates (halo = Cl, Br, I) have been obtained, and reported herein are their half-lives. The experimental results are supported by DFT calculations, and we provide a possible explanation for the reduced thermal stability of ethyl halodiazoacetates compared to ethyl diazoacetate and for the relative decomposition rates between the chloro, bromo and iodo analogs. We have also briefly studied the thermal, non-catalytic cyclopropanation of styrenes and compared the results to the analogous Rh(II)-catalyzed reactions.
- Open Access
- 20 October 2015
- Published by Beilstein Institut in Beilstein Journal of Organic Chemistry
- Vol. 11 (1) , 1944-1949
Synthesis of quinoline-3-carboxylates by a Rh(II)-catalyzed cyclopropanation-ring expansion reaction of indoles with halodiazoacetates
In this letter, we report a novel synthesis of ethyl quinoline-3-carboxylates from reactions between a series of indoles and halodiazoacetates. The formation of the quinoline structure is probably the result of a cyclopropanation at the 2- and 3-positions of the indole followed by ring-opening of the cyclopropane and elimination of H–X.
- 20 October 2015
- Published by Beilstein Institut in Beilstein Journal of Organic Chemistry
- Vol. 11 (1) , 1944-1949
Open AccessSynthesis of quinoline-3-carboxylates by a Rh(II)-catalyzed cyclopropanation-ring expansion reaction of indoles with halodiazoacetates
In this letter, we report a novel synthesis of ethyl quinoline-3-carboxylates from reactions between a series of indoles and halodiazoacetates. The formation of the quinoline structure is probably the result of a cyclopropanation at the 2- and 3-positions of the indole followed by ring-opening of the cyclopropane and elimination of H–X.
- Open Access
- 11 July 2013
- Published by Beilstein Institut in Beilstein Journal of Organic Chemistry
- Vol. 9 (1) , 1407-1413
α-Bromodiazoacetamides – a new class of diazo compounds for catalyst-free, ambient temperature intramolecular C–H insertion reactions
In this work, we introduce a new class of halodiazocarbonyl compounds, α-halodiazoacetamides, which through a metal-free, ambient-temperature thermolysis perform intramolecular C–H insertions to produce α-halo-β-lactams. When carried out with α-bromodiazoacetamides bearing cyclic side chains, the thermolysis reaction affords bicyclic α-halo-β-lactams, in some cases in excellent yields, depending on the ring size and substitution pattern of the cyclic amide side chains.
- 11 July 2013
- Published by Beilstein Institut in Beilstein Journal of Organic Chemistry
- Vol. 9 (1) , 1407-1413
Open Accessα-Bromodiazoacetamides – a new class of diazo compounds for catalyst-free, ambient temperature intramolecular C–H insertion reactions
In this work, we introduce a new class of halodiazocarbonyl compounds, α-halodiazoacetamides, which through a metal-free, ambient-temperature thermolysis perform intramolecular C–H insertions to produce α-halo-β-lactams. When carried out with α-bromodiazoacetamides bearing cyclic side chains, the thermolysis reaction affords bicyclic α-halo-β-lactams, in some cases in excellent yields, depending on the ring size and substitution pattern of the cyclic amide side chains.
- Open Access
- 20 July 2012
- Published by Beilstein Institut in Beilstein Journal of Organic Chemistry
- Vol. 8 (1) , 1126-1133
Combined bead polymerization and Cinchona organocatalyst immobilization by thiol–ene addition
In this work, we report an unusually concise immobilization of Cinchona organocatalysts using thiol–ene chemistry, in which catalyst immobilization and bead polymerization is combined in a single step. A solution of azo initiator, polyfunctional thiol, polyfunctional alkene and an unmodified Cinchona-derived organocatalyst in a solvent is suspended in water and copolymerized on heating by thiol–ene additions. The resultant spherical and gel-type polymer beads have been evaluated as organocatalysts in catalytic asymmetric transformations.
- 20 July 2012
- Published by Beilstein Institut in Beilstein Journal of Organic Chemistry
- Vol. 8 (1) , 1126-1133
Open AccessCombined bead polymerization and Cinchona organocatalyst immobilization by thiol–ene addition
In this work, we report an unusually concise immobilization of Cinchona organocatalysts using thiol–ene chemistry, in which catalyst immobilization and bead polymerization is combined in a single step. A solution of azo initiator, polyfunctional thiol, polyfunctional alkene and an unmodified Cinchona-derived organocatalyst in a solvent is suspended in water and copolymerized on heating by thiol–ene additions. The resultant spherical and gel-type polymer beads have been evaluated as organocatalysts in catalytic asymmetric transformations.
- 13 October 2010
- Published by Elsevier in Tetrahedron Letters
- Vol. 51 (41) , 5378-5381
Insights on Rh(II) carbenoid reactivity
- 13 October 2010
- Published by Elsevier in Tetrahedron Letters
- Vol. 51 (41) , 5378-5381
Insights on Rh(II) carbenoid reactivity
- 2 August 2010
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 2010 (23) , 4355-4359
Computational Study of C–H Insertion Reactions with Ethyl Bromodiazoacetate
A computational study of C–H insertion reactions between ethyl bromodiazoacetate and three different substrates is presented. The mechanism of the C–H insertion is shown to be substrate dependent; the reaction follows either a concerted mechanism or a two‐step mechanism in which complete hydride transfer precedes C–C bond formation.
- 2 August 2010
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 2010 (23) , 4355-4359
Computational Study of C–H Insertion Reactions with Ethyl Bromodiazoacetate
A computational study of C–H insertion reactions between ethyl bromodiazoacetate and three different substrates is presented. The mechanism of the C–H insertion is shown to be substrate dependent; the reaction follows either a concerted mechanism or a two‐step mechanism in which complete hydride transfer precedes C–C bond formation.
- 28 May 2010
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 2010 (17) , 3179-3204
Polymer‐Supported Chiral Organocatalysts: Synthetic Strategies for the Road Towards Affordable Polymeric Immobilization
In this microreview, we highlight the field of polymer‐supported organocatalysis, especially immobilized enamine and iminium organocatalysts. We try to formalize the overall synthetic strategies for polymeric immobilization as spanning the area of two overlapping regions, from a copolymer strategy favoured by low‐valued and small catalysts to a classical post‐modification strategy favoured by valuable and/or large catalysts. Organocatalysis is particularly interesting as it is probably best described as being located in the transitional region, and we will trace the historic and factual origins for the unfortunate predispositions towards post‐modification schemes. In addition, we try to identify affordable and useful syntheses of key organocatalyst immobilization intermediates, as well as polymer supports that are more compatible with a broader range of reaction solvent polarity, something of crucial importance in organocatalysis.
- 28 May 2010
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 2010 (17) , 3179-3204
Polymer‐Supported Chiral Organocatalysts: Synthetic Strategies for the Road Towards Affordable Polymeric Immobilization
In this microreview, we highlight the field of polymer‐supported organocatalysis, especially immobilized enamine and iminium organocatalysts. We try to formalize the overall synthetic strategies for polymeric immobilization as spanning the area of two overlapping regions, from a copolymer strategy favoured by low‐valued and small catalysts to a classical post‐modification strategy favoured by valuable and/or large catalysts. Organocatalysis is particularly interesting as it is probably best described as being located in the transitional region, and we will trace the historic and factual origins for the unfortunate predispositions towards post‐modification schemes. In addition, we try to identify affordable and useful syntheses of key organocatalyst immobilization intermediates, as well as polymer supports that are more compatible with a broader range of reaction solvent polarity, something of crucial importance in organocatalysis.
- 6 October 2009
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 2009 (30) , 5185-5191
New Phenylglycine‐Derived Primary Amine Organocatalysts for the Preparation of Optically Active Warfarin
- 6 October 2009
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 2009 (30) , 5185-5191
New Phenylglycine‐Derived Primary Amine Organocatalysts for the Preparation of Optically Active Warfarin
- 12 June 2009
- Published by American Chemical Society (ACS) in Organic Letters
- Vol. 11 (14) , 2968-2971
Synthesis of Acrylic Polymer Beads for Solid-Supported Proline-Derived Organocatalysts
A completely non-chromatographic and highly large-scale adaptable synthesis of acrylic polymer beads containing proline and prolineamides has been developed. Novel monomeric proline (meth)acrylates are prepared from hydroxyproline in only one step. Free-radical copolymerization then gives solid-supported proline organocatalysts directly in as little as two steps overall, without using any prefabricated solid supports, by using either droplet or dispersion polymerization. These affordable acrylic beads have highly favorable and adjustable swelling characteristics and are excellent reusable catalysts for organocatalytic reactions.
- 12 June 2009
- Published by American Chemical Society (ACS) in Organic Letters
- Vol. 11 (14) , 2968-2971
Synthesis of Acrylic Polymer Beads for Solid-Supported Proline-Derived Organocatalysts
A completely non-chromatographic and highly large-scale adaptable synthesis of acrylic polymer beads containing proline and prolineamides has been developed. Novel monomeric proline (meth)acrylates are prepared from hydroxyproline in only one step. Free-radical copolymerization then gives solid-supported proline organocatalysts directly in as little as two steps overall, without using any prefabricated solid supports, by using either droplet or dispersion polymerization. These affordable acrylic beads have highly favorable and adjustable swelling characteristics and are excellent reusable catalysts for organocatalytic reactions.
- 5 January 2009
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 2009 (3) , 387-395
The Selective O‐Acylation of Hydroxyproline as a Convenient Method for the Large‐Scale Preparation of Novel Proline Polymers and Amphiphiles
In this work we show how a direct O‐acylation of trans‐4‐hydroxy‐L‐proline with acyl chlorides in trifluoroacetic acid makes a range of novel proline derivatives readily available on large‐scale. No protecting groups or chromatographic techniques are involved in any of the procedures, and certain amphiphilic proline derivatives, which recently have received interest in synthesis, are now potentially some of the most readily accessible organocatalysts. The selective acylation was also utilized in the synthesis of a novel high‐load proline polymer, poly(O‐acryloyl‐trans‐4‐hydroxy‐L‐proline), a polymer with the highest proline loading reported and for which classical methods failed for its preparation. (© Wiley‐VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2009)
- 5 January 2009
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 2009 (3) , 387-395
The Selective O‐Acylation of Hydroxyproline as a Convenient Method for the Large‐Scale Preparation of Novel Proline Polymers and Amphiphiles
In this work we show how a direct O‐acylation of trans‐4‐hydroxy‐L‐proline with acyl chlorides in trifluoroacetic acid makes a range of novel proline derivatives readily available on large‐scale. No protecting groups or chromatographic techniques are involved in any of the procedures, and certain amphiphilic proline derivatives, which recently have received interest in synthesis, are now potentially some of the most readily accessible organocatalysts. The selective acylation was also utilized in the synthesis of a novel high‐load proline polymer, poly(O‐acryloyl‐trans‐4‐hydroxy‐L‐proline), a polymer with the highest proline loading reported and for which classical methods failed for its preparation. (© Wiley‐VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2009)